Tender For Construction Of Ayurvedic Hospital (B+G+3) At Paradise Chowmuhani, Agartala.Tripura / Phase--1/ Sh:- Tiles Works, Door-Window Frame-Shutter, Sanitary Items, Plinth Protection Work Etc.
Tender Value
24.13 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
1 days left
EMD
48262
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Ayurvedic Hospital (B+G+3) At Paradise Chowmuhani, Agartala.Tripura / Phase--1/ Sh:- Tiles Works, Door-Window Frame-Shutter, Sanitary Items, Plinth Protection Work Etc.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling doors, windows and clerestory windows(steel or wood) shutter including chowkhats,architrave, holdfasts etc. complete and stackingwithin 50 metres lead : |
| 2 | Of area 3 sqm and below. |
| 3 | Of area beyond 3 sqm. |
| 4 | Dismantling wood work in frames, trusses, purlinsand rafters up to 10 metres span and 5 metres heightincluding stacking the material within 50 metres lead |
| 5 | Of sectional area 40 sq cm and below. |
| 6 | Of sectional area beyond 40 sq cm. |
| 7 | Making plinth protection 50mm thick of cementconcrete 1:3:6 (1 cement : 3 fine sand : 6 graded wellburnt brick aggregate 20 mm nominal size) over75mm bed of dry brick ballast 40mm nominal sizewell rammed and consolidated and grouted with finesand including finishing the top smooth. |
| 8 | Dismantling old plaster or pointing, raking out joints,cleaning and preparing the surface for re-plasteringor re-pointing including disposal of rubbish to thedumping ground with all leads and lifts etc.completeas per direction of the Engineer- in-charge. |
| 9 | Dismantling old glass panes from wooden / steelstructures including stacking of serviceablematerials and disposal of rubbish and unserviceablematerials to the dumping ground with all leads andlifts etc.complete as per direction of the Engineer- incharge. |
| 10 | Dismantling precast concrete or stone slabs in walls,partition walls etc. including stacking within 50metres lead : |
| 11 | Thickness up to 40 mm |
| 12 | Dismantling G.I. pipes (external work) includingexcavation and refilling trenches after taking out thepipes, manually/ by mechanical means includingstacking of pipes within 50 metres lead as perdirection of Engineer-in-charge : |
| 13 | 15 mm to 40 mm nominal bore |
| 14 | Finishing walls with acrylic smooth exterior paint ofrequired shade of approved brand and manufacture onold work ( one or more coats ) including preparation ofsurface as required complete as per direction of theEngineer in charge. |
| 15 | Demolishing cement concrete manually / bymechanical means including disposal of materialwith all lifts and upto 50 m lead etc. complete as perdirection of the Engineer- in-charge:- |
| 16 | Nominal concrete 1:3:6 or richer mix (i/c equivalentdesign mix) |
| 17 | Providing and laying in position cement concrete ofspecified grade excluding the cost of centring andshuttering --All work upto plinth level: |
| 18 | 1:2:4 ( 1 Cement: 2 fine sand : 4 graded stone aggregate20 mm nominal size) |
| 19 | Providing and fixing C.P. brass bib cock of approvedquality conforming to IS:8931 |
| 20 | 15 mm nominal bore |
| 21 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards andweighing not less than 810 gms. |
| 22 | 15 mm nominal bore |
| 23 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards andweighing not less than 690 gms. |
| 24 | 15mm nominal bore |
| 25 | Providing and fixing C.P. brass stop cock (concealed)of standard design and of approved makeconforming to IS:8931. |
| 26 | 15 mm nominal bore |
| 27 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved qualityconforming to IS:8931 |
| 28 | 15 mm nominal bore |
| 29 | Providing and fixing C.P. Brass extension nipple (size15mmx50mm) of approved make and quality as perdirection of Engineer-in-charge. |
| 30 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps,32 mm C.P. brass waste ofstandard pattern, including painting of fittings andbrackets, cutting and making good the wallswherever require : |
| 31 | White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 32 | Providing wood work in frames of doors, windows,clerestory windows and other frames, wrought framedand fixed in position : |
| 33 | Local Teak Wood |
| 34 | Providing and fixing panelled / or panelled and glazedshutters for doors, windows and clerestory windowsincluding ISI marked bright finished / blackenamelled M.S butt hinges with necessary screwsexcluding panelling and or glazing, which will be paidfor separately but including the wooden beading of 20× 12 mm for fixing panelling and or glazing as perdirection of Engineer-In-Charge. |
| 35 | 35 mm thick shutters |
| 36 | Providing and fixing panelling or panelling andglazing in panelled or panelled and glazed shutters fordoors, windows and clerestory windows (Area ofopening for panel inserts excluding portion insidegrooves or rebates to be measured). Panelling forpaneled or paneled and glazed shutters 25 to 40 mmthick. |
| 37 | Local Teak Wood 16 mm thick |
| 38 | Providing and fixing glazed shutters for doors,windows and clerestory windows using 4 mm thickfloat glass (weight not less than 10ks/Sqm) panesincluding black enamelled ISI marked MS butt hingeswith necessary screws. |
| 39 | Local Teak wood |
| 40 | 35 mm thick |
| 41 | Providing and fixing bright finished brass hangingtype floor door stopper with necessary screws, etc.complete. |
| 42 | Providing and fixing factory made UPVC door framemade of UPVC extruded, section having an overalldimension, as below (tolerance +/- 1mm) with wallthickness 2.0mm+/- 02mm. corners of the door frameto be jointed with galvanized brackets and stainlessscrews, joint mitred and plastic wilded. The hinge sidevertical of the frames reinforced by galvanized MStube of size 19 × 19 mm and 1 mm +/- 0.1 mm wallthickness and 3 nos stainless steel hinges fixed to theframe complete as per manufacturers specificationand direction of Engineer-in-Charge. |
| 43 | Extruded section Profile size 48x40 mm. |
| 44 | Providing and fixing to existing door frames. |
| 45 | 24 mm thick factory made PVC door shutters made ofstyles and rails of a UPVC hollow section of size 59x24mm and wall thickness 2 mm ± 0.2 mm with inbuiltedging on both sides. The styles and rails mitred andjoined at the corners by means of M.S. galvanised/plastic brackets of size 75×220 mm having wallthickness 1.0 mm and stainless steel screws. The stylesof the shutter reinforced by inserying galvanised MStube of size 20×20 mm and 1 mm ± 0.1 mm wallthickness. The lock rail made up of \\"H\\" Section, a UPVChollow section of size 100×24 mm and 2 mm ± 0.2 mmwall thickness fixed to the shutter styles by means ofplastic /galvanised MS \\"U\\" cleats. The shutter framefilled with a UPVC multi-chambered single panel of size not less than 620 mm, having overall thickness of 20mm and 1 mm ± 0.1 mm wall thickness. The panels filled vertically and tie bar at two places by inserting horizontaly 6 mm galvanised MS rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-In-Charge. (for W.C. and Bathroom door shutter). |
| 46 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm at 100 mm centre to centre and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia. steel pulleys & with riveted bolts, nuts, locking arrangement, stoppers, handles, hold fast /anchor bolt including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required. |
| 47 | Providing and fixing stainless steel (Grade 304) railingmade of Hollow tubes, channels, plates etc., includingwelding, grinding, buffing, polishing and makingcurvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete,including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 48 | Tile work in skirting, risers of steps and dado up to 2 mheight over 12 mm thick bed of cement mortar 1:3 (1cement :3 fine sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade etc. all complete as per direction of Engineer-in-charge. |
| 49 | 8mm thick Rajnagar marble tiles (polished) |
| 50 | Providing and fixing Marble stone in floors over 20 mmthick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed with of matching shade, including rubbing and polishing etc. all complete as per direction of Engineer-in-charge. |
| 51 | 14 mm thick Marble stone |
| 52 | Raj Nagar plain marble |
| 53 | Providing and fixing 1st class quality ceramic glazed wall tiles conforming to IS : 15622 - 2017 (thickness to be specified by the manufacturer) of approved make in all colours, shades of any size as approved by Engineer-incharge in skirting, risers of steps and dados, laid over 12mm thick bed of cement mortar 1 : 3 (1 cement : 3 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade etc. all complete as per direction of the Engineer in-charge. |
| 54 | 450 mm X 300 mm in all shades and design |
| 55 | Providing and laying 1st class quality ceramic floor tilesin different sizes (thickness to be specified by themanufacturer) of 1st quality conforming to IS : 15622 -2017 of approved make in colours such as White, Ivory,Grey, Fume Red Brown, laid over 20 mm thick cementmortar 1:4 (1 cement : 4 fine sand), Jointing with greycement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. allcomplete as per direction of the Engineer in-charge. |
| 56 | Mat Finish Tiles/ Anti-skid Tiles/ Glossy Tiles |
| 57 | 300 mm x 300 mm in all shades and designs |
| 58 | Providing and fixing on wall face unplasticisedRigid PVC rain water pipes (working pressure 4kg/cm2) conforming to IS : 13592 Type A includingjointing with seal ring conforming to IS : 5382leaving 10 mm gap for thermal expansion etc.complete as per direction of Engineer-in-charge : |
| 59 | Single socketed pipe - 110 mm OD metre |
| 60 | Providing and fixing on wall face unplasticised - PVCmoulded fittings/ accessories for unplasticised RigidPVC rain water pipes conforming to IS : 13592 Type-Aincluding jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion etc.complete as per direction of Engineer-in-charge : |
| 61 | Coupler |
| 62 | 110 mm each |
| 63 | Bend 87.5° |
| 64 | 110mm each |
| 65 | Providing and fixing unplasticised -PVC pipe clips ofapproved design to unplasticised - PVC rain waterpipes by means of 50x50x50mm hard wood plugs,screwed with M.S. screws of required lengthincluding cutting brick work and fixing with cementmortar 1 : 4 (1cement : 4 fine sand) making good the wall etc. complete as per direction of Engineer-in-charge. |
| 66 | 110mm |
| 67 | 15 mm cement plaster on the rough side of single or half brick wall of mix: |
| 68 | Cement mortar 1:5 (1 cement : 5 fine sand) |
| 69 | 12 mm cement plaster of mix |
| 70 | Cement mortar 1:5 (1 cement : 5 fine sand) |
| 71 | Neat cement punning. |
| 72 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 73 | Removing white or colour wash by scrapping and sandpapering and preparing the surface smooth includingnecessary repairs to scratches etc. complete |
| 74 | distempering with dry distemper of approved brand and manufacture and of required shade on old work (one or more coats ), to give an even shade as required complete as per direction of the Engineer in charge. |
| 75 | Distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade. [Payment shall be made after submission of Test Certificate issued by the Manufacturer] |
| 76 | Finishing walls with acrylic smooth exterior paint ofrequired shade of approved brand and manufacture onold work ( one or more coats ) including preparation ofsurface as required complete as per direction of theEngineer in charge. |
| 77 | Finishing walls with acrylic smooth exterior paint ofrequired shade of approved brand and manufacture[Payment shall be made after submission of TestCertificate issued by the Manufacturer] : |
| 78 | New work ( two or more coats applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 79 | Cleaning of terrace/loft water storage tank (insidesurface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account). |
| 80 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : |
| 81 | W.C. pan with ISI marked white solid plastic seat and lid |
| 82 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings: |
| 83 | i) Flat back wash basin of size 630x450mm. |
| 84 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 85 | Flexible pipe |
| 86 | i)32 mm dia |
| 87 | Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required : |
| 88 | i)White glazed fire clay kitchen sink of size 600x450x250 mm. |
| 89 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 90 | i)10 litre capacity-White |
| 91 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 92 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements weighing not less than 106 gms. |
| 93 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved 450mm long towel rail with total length of 495mm, 78mm wide and effective height quality and colour. |
| 94 | a) 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms. |
| 95 | Providing & fixing of surgical tap of approved quality as per direction of Engineer-in-Charge |
| 96 | i) 15 mm nominal bore. |
| 97 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 98 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 4 kg / cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: |
| 99 | i)Single socketed pipe - 75 mm OD |
| 100 | ii)Single socketed pipe - 110 mm OD |
| 101 | Providing and fixing ball valve (brass) of approved quality High or Low pressure, with plastic floats complete:- |
| 102 | i)15 mm nominal bore |
| 103 | ii)20 mm nominal bore |
| 104 | iii) 25 mm nominal bore |
| 105 | Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required : |
| 106 | i)White glazed fire clay kitchen sink of size 600x450x250 mm. |
| 107 | Providing and fixing Chlorinated PolyvinylChloride (CPVC) pipes, having thermal stability forhot & cold water supply including all CPVC plain &brass threaded fittings including fixing the pipe withclamps at 1.00 m spacing. This includes jointing ofpipes & fittings with one step CPVC solvent cementand testing of joints complete as per direction ofEngineer in Charge.Internal work - Exposed on wall |
| 108 | 15 mm nominal outer dia .Pipes. |
| 109 | 20 mm nominal outer dia .Pipes. |
| 110 | 25 mm nominal outer dia .Pipes. |
| 111 | 32 mm nominal outer dia .Pipes. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender