Tender For Repairs Maintenance Of Motors Pump Starters Actuated Valves Panel Boards Etc Development Of Borewells Air Compressors Swimming Pool Pressure Filter Units And Allied Works Under Ge Narangi
Tender Value
45 Lakhs
Estimated cost
Bid Submission
09 Sep 2026
18 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kamrup Metro → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs Maintenance Of Motors Pump Starters Actuated Valves Panel Boards Etc Development Of Borewells Air Compressors Swimming Pool Pressure Filter Units And Allied Works Under Ge Narangi
BOQ
| Sl. No. | Item Description |
| 1 | Taking out carefully submersible pump of capacity up 6HP to 10HP any make and model from the borewell (350 ft-600ft depth) compelte with column pipe of size 50mm dia and other connected parts and lowering the same after necessary repair of the pump/development of borewell and replacement of nut bolts, gasket suitable size all per requirement complete all as directed by Engr-in-Charge.Note- All T&P required shall be supplied by contractor without extra cost, repair work to be mesured and paid under relevant items complete all as specified and directed. |
| 2 | Taking out carefully submersible pump of capacity up 10 to 40HP any make and model from the UG sump by disconnecting electric connection, opening nuts & bolts from delivery line and other connected parts and lowering the same after necessary repair works of the pump set and replacement of nut bolts, gasket suitable size all per requirement complete all as directed by Engr-in-Charge. Note- All T&P required shall be supplied by contractor without extra cost, repair work to be mesured and paid under relevant items complete all as specified and directed. |
| 3 | Material and labour for Strip opening of 3 phase 3 HP motor AC submersible motor any type taking out burnt winding coil complete and re-winding with PVC insulated super quality water proof winding wire including seal PVC (water proof compound) and jointing new submersible cable at least 6m long with water proof tape all as specified and directed and re-assembling the motor and testing compelete of the following rating:- Note : Rates include all required T&P shall be supplied by the contractor include transportation of motor from site to workshop and back to site after necessary repair works complete all as specified and directed. |
| 4 | Material and labour for Strip opening of 3 phase 6HP motor AC submersible motor any type taking out burnt winding coil complete and re-winding with PVC insulated super quality water proof winding wire including seal PVC (water proof compound) and jointing new submersible cable at least 6m long with water proof tape all as specified and directed and re-assembling the motor and testing compelete of the following rating:- Note : Rates include all required T&P shall be supplied by the contractor include transportation of motor from site to workshop and back to site after necessary repair works complete all as specified and directed. |
| 5 | Material and labour for Strip opening of 3 phase 10 HP motor AC submersible motor any type taking out burnt winding coil complete and re-winding with PVC insulated super quality water proof winding wire including seal PVC (water proof compound) and jointing new submersible cable at least 6m long with water proof tape all as specified and directed and re-assembling the motor and testing compelete of the following rating:- Note : Rates include all required T&P shall be supplied by the contractor include transportation of motor from site to workshop and back to site after necessary repair works complete all as specified and directed. |
| 6 | Material and labour for Strip opening of 3 phase 20 HP motor AC submersible motor any type taking out burnt winding coil complete and re-winding with PVC insulated super quality water proof winding wire including seal PVC (water proof compound) and jointing new submersible cable at least 6m long with water proof tape all as specified and directed and re-assembling the motor and testing compelete of the following rating:- Note : Rates include all required T&P shall be supplied by the contractor include transportation of motor from site to workshop and back to site after necessary repair works complete all as specified and directed. |
| 7 | Material and labour for Strip opening of 3 phase 40 HP motor AC submersible motor any type taking out burnt winding coil complete and re-winding with PVC insulated super quality water proof winding wire including seal PVC (water proof compound) and jointing new submersible cable at least 6m long with water proof tape all as specified and directed and re-assembling the motor and testing compelete of the following rating:- Note : Rates include all required T&P shall be supplied by the contractor include transportation of motor from site to workshop and back to site after necessary repair works complete all as specified and directed. |
| 8 | Taking out worn out bearing bush sleeves from the motor of capacity 6 to 10 HP and providing new stainless steel sleeve , turning and polishing of sleeve complete in all respect all as specified and directed. |
| 9 | Taking out worn out bearing bush sleeves from the motor of capacity 20HP to 40 HP and providing new stainless steel sleeve , turning and polishing of sleeve complete in all respect all as specified and directed. |
| 10 | Taking out worn out bearing bush sleeves from the motor of capacity 3 HP and providing new stainless steel sleeve , turning and polishing of sleeve complete in all respect all as specified and directed. |
| 11 | Supply and fix in replacement of thrust plate alongwith disc of motor of capacity 6 HP to 10 HP complete all as specified and directed. |
| 12 | Supply and fix in replacement of oil seal of motor of capacity 3HP to 10 HP complete all as specified and directed. |
| 13 | Dismantling the submersible pumping set bowl assembly any make and model for carrying out repair and replacement of worn out parts by strip opening with all parts such as bowl casing, impellers, pump shafts, lock collects, bushes neck rings etc and machine work such as welding, turning, re-facing where required and replacing of parts of pump of 6 to 9 stages, size up to 100 mm, for 6 HP to 10 HP capacityNote:- Spares parts and their fixing shall be paid separately under the respective items of schedule. |
| 14 | Supply and fix in replacement of pump shaft stainless steel suitable for submersible pump set up to 9 stages including threading cutting to size complete all as specified and directed. |
| 15 | Supply and fix in replacement of gun metal impellers suitable size for bowl assembly of submersible pumping set as per site requirement for suction discharge and intermediate bowls complete all as specified and directed. |
| 16 | Supply and fix CI casing suction/discharge/intermediate with studs complete all as specified and directed. |
| 17 | Supply and fix shaft seal of rubber complete all as specified and directed. |
| 18 | Supply and fix neck of bowls suction/discharge/intermediate complete all as specified and directed. |
| 19 | Supply and fix Gun metal bush of bowls complete all as specified and directed. |
| 20 | Supply and fix rubber bushes of bowls assembly of suitable size make and model for suction and discharge bowls complete all as specified and directed. |
| 21 | Supply and fix shaft coupling with key stainless steel of suitable sizes type make and model complete all as specified and directed. |
| 22 | Supply and fix middle /discharge bush, stainless steel of suitable size all as required at site complete all as specified and directed. |
| 23 | Supply and fix stainless steel impeller key complete all as specified and directed. |
| 24 | Supply and fix studs with nuts complete all as specified and directed. |
| 25 | Material and labour for mild steel GI column pipe for submersible pump 50 mm dia , heavy duty and 6 meter long duly welded flange on both sides incl rubber joint complete all as specified and directed. |
| 26 | Supply and fix in repair Submersible flat cable of size 6 Sqmm 3 core 1100 volt grade copper conductor conforming to IS 694/1990 with latest ammendments from starter to motor complete all as specified and directed. |
| 27 | Supply and fix in repair Submersible flat cable of size 10 Sqmm 3 core 1100 volt grade copper conductor conforming to IS 694/1990 with latest ammendments from starter to motor.complete all as specified and directed. |
| 28 | Supply and fix in repair Submersible flat cable of size 16 Sqmm 3 core 1100 volt grade copper conductor conforming to IS 694/1990 with latest ammendments from starter to motor. complete all as specified and directed. |
| 29 | Supply and fix in repair single core Cable with copper conductor PVC round sheathed (flexible) industrial cable of size 16 Sqmm 1100 volt grade copper conductor conforming to IS 694/1990 with latest ammendments from starter to motor complete all as specified and directed. |
| 30 | Supply and fix in repair single core Cable with copper conductor PVC round sheathed (flexible) industrial cable of size 35 Sqmm 1100 volt grade copper conductor conforming to IS 694/1990 with latest ammendments from starter to motor complete all as specified and directed. |
| 31 | Supply and fix in repair single core Cable with copper conductor PVC round sheathed (flexible) industrial cable of size 50 Sqmm 1100 volt grade copper conductor conforming to IS 694/1990 with latest ammendments from starter to motor complete all as specified and directed. |
| 32 | Supply and fix in repair single core Cable with copper conductor PVC round sheathed (flexible) industrial cable of size 10 Sqmm 1100 volt grade copper conductor conforming to IS 694/1990 with latest ammendments from starter to motor complete all as specified and directed. |
| 33 | Taking out the water sample from bore well water any type and carry out the test for 17 parameters as per indian standard drinking water specifications (BIS-10500:1991) from Govt approved lab complete all as specified and directed. |
| 34 | Material and labour for Development (contineously) of Bore well in B block, C block & E Block of depth 110 Mtr to 150 Mtr by means of heavy duty compressor 10 Kg/sqcm (Compressor to be arranged by contractor at his own cost including POL) for first 24 Hrs by lowering suitable dia injector pipes with required size of air line to the required depth for development of well by compressed air till sand free clean water is obtained and testing the yield of borewell for continious running by means of V notch including removal of injector pipes etc complete all as specified and directed. |
| 35 | All as per item No 34 here-in-before but as subsequent development beyond 24 hours or part there of as required as in item No. 34 here in before complete all as specified and directed. Please Enable Macros to View BoQ information |
| 36 | All as per item No 34 here-in-before but as subsequent development beyond 24 hours or part there of as required as in item No. 34 here in before complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender