Tender For special Repair Of Bldg Asc-130 (Shorting Out Shed), Asc-130A, Entrance Gate Of Unit, Veh Parking Area, Stn Unit, Jcos / Or Waiting Area Of 51 (I) Sup Pl Asc And Provn Of 01 X Toilet Cum Bath Room For Fire Fighting Staff At Stn Amn Dump Und
Tender Value
41.57 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
11 days left
EMD
83200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Indore → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair Of Bldg Asc-130 (Shorting Out Shed), Asc-130A, Entrance Gate Of Unit, Veh Parking Area, Stn Unit, Jcos / Or Waiting Area Of 51 (I) Sup Pl Asc And Provn Of 01 X Toilet Cum Bath Room For Fire Fighting Staff At Stn Amn Dump Under Ge (Awc) Mhow
BOQ
| Sl. No. | Item Description |
| 1 | M & L for Roughening / taking down existing roof treatment surfaces including plaster over old concrete roof by picking, sweeping clean and washing down with water to remove dust etc. all as specified and directed. |
| 2 | M & L Brushing neat cement slurry with 3 Kg of cement per Sqm for bonding of old concrete surface to new concrete/plaster surfaces complete all as specified and directed. |
| 3 | M & L Cutting out cracks to 6 mm wide 'V' section in existing roofs or terrace (if cracks > 2.5 mm wide), cleaning out, wetting, grouting with and including chemical compound SUPER LATEX of DR. FIXIT of PIDILITE INDUSTRIES LTD or SBR LATEX of STP LTD,, water and cement Sand slurry in the proportion of (1:3) by weight mix or as per manufacturers instructions complete all as specified and directed. |
| 4 | M & L PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) mixed with integral waterproofing chemical PIDIPROOF LW of DR FIXIT of PIDILTE INDUSTRIES LTD or STP No. 1 (LIQUID) of STP LTD @ 200 millilitre per 50 Kg per cement, as in padding on roof surface for correcting / making proper slope on roof, and finishing the surfaces fair and even without using extra cement complete all as specified. Note:- Liquid WPC shall be measured and paid separately. |
| 5 | M & L 10 mm thick rendering in CM (1:3) mixed with integral water proofing chemical compound PIDIPROOF LW of DR FIXIT of PIDILITE INDUSTRIES LTD or STP No 1 (liquid) of STP Ltd @ 200 mililitre per 50 Kg cement as per manufacturers instructions over concrete surface and finishing the surface fair and even without using extra cement complete all as specified.Note:- Liquid WPC shall be measured and paid separately. |
| 6 | Supply only liquid water proofing compound.Make:- SUPER LATEX or DR. FIXIT of PIDILITE INDUSTRIES LTD and PIDIPROOF LW of DR FIXIT of PIDILITE INDUSTRIES LTD or equivalent make as approved by GE. |
| 7 | M&L Water proofing treatment on \\"Non approachable / non accessible roof\\" surface (Horizontal & Vertical surfaces) in following sequence through authorized applicator of the manufacturer all as specified and directed complete.(i) Cleaning of new rendered surface properly and drying the surfaces.(ii) Applying a coat of oxidised bitumen based solvent primer @ 0.30 Kg/ Sqm.(iii) Laying 3 mm thick APP modified polymeric water proofing membrane with 100 mm over laps sealed and bounded to the surfaces by 'torchon' method. (iv) Applying two coats of bitiminous aluminium pait @ 200 Gram / Sq M (minimum) in two coats. Make incorporated : HYPERPLUS of IWL (INDIA) LTD or equivalent in Pidilite industrries Ltd / STP Ltd complete all as specified and as manufacturer instruction . |
| 8 | Dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) and rubbish of the premisses complete all as specified and directed. |
| 9 | M&L non skid/mat finish ceramic colour tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm (Colour and design of tiles as approved by GE), in floors etc, and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed. |
| 10 | M&L glazed ceramic coloured tiles size 350 x 250 x 7mm / 450 x 350 x 7 mm thick (Colour and design of tiles as approved by GE) on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 11 | M & L 25 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate including finishing surface of concrete topping even and rough complete as in levelling work etc complete all as specified and directed. |
| 12 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed |
| 13 | M&L Granite18- 20 mm thick(of any type) work (table rubbed and polished) for wall lining (Veneering to wall) and laid on cill of parapit wall over 12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite colour Red or brown as per direction. |
| 14 | M & L 22 - 25 mm thick machine cut Kota stone slab in flooring or treads single piece of steps over and including 15mm thick screed bed in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing complete all as specified and as directed. Note:- The size of Kota stone slab shall not less than 550 mm x 550 mm cut size, except the location where the balance portion remain less than size as specified above. |
| 15 | Description all as per item No 14.00 above but as in skirting or vertical surfaces including 10 mm thick rendering in cement mortar 1:4, complete all as specified and as directed. |
| 16 | Taking down chowkhats or frames not exc 1.5 sqm each without taking off shutter from the frame complete all as specified and directed. |
| 17 | Taking down chowkhats or frame exc 1.5 sqm but not exc 4 sqm with shutter (without taking off shutter frome the frame ) |
| 18 | S & F 100 mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed. |
| 19 | S & F aluminium 200 mm long anodised barrel tower bolts ISI marked of extruded section and fixed complete all as specified and directed.. |
| 20 | S & F 150 mm size aluminium handles cast type, anodised ISI marked complete all as specified and directed. |
| 21 | S & F 250 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete all as specified and directed.. |
| 22 | S & F 300 mm mild steel, ordinary rat tail rod pattern spring including roller and roller plate complete fixed to steel frame / wooden frame including necessary welding, cutting, opening of wall for fixing bracket and making good complete all as specified and directed.. |
| 23 | S & F in repair powder coated aluminium door seal 30mm wide and length as per requirement of site including dust/insect arrestor complete all as specified and directed. |
| 24 | S & F Powder coated aluminium sliding glazed windows with three track shutter sliding (two shutters glazed and one shutter wire mesh) shall be two part as upper patr shall be three movable shutter and lower part consist three shutter (one openable in centre and both side fixed type shutter with frosted glass) with following specification and making good the adjacent side of jombs of windows by plastering in CM 1: 3 even and smooth complete etc . shifting of existing cooler stand where required complete all as specified and as directed by Engr-in-charge.(i) Windows frame of cross section 101mm x 44mm x 1.5mm thick. (Min)(ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm x1.1mm thick.(Min)(iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick.(Min)(iv) 4 mm thick glass superior quality.(Min)(v) IDPE Rubber guasket for fixing of glass.(vi) Locking cleats per shutter -01 Nos.(Min)(vii) Sliding rollers per shutter - 02 Nos.(Min)(viii) Stainless steel wire cloth 0.30mm nominal dia of wire and average width of aperture 1.40mm for shutters 01 Nos.(Ix) fixing screw for frame with wall per windows- 08 Nos. |
| 25 | S & F powder coated aluminium ventilator cross section conforming to IS 63.5x38.10x1.5mm consisting of two partions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jombs all around in CM 1:3 finishing even and smooth complete all as specified and directed. |
| 26 | M&L mild steel framed work such as grills ,gratings etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ; barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 27 | S&F for mild steel framed work ornamental gates of angle or other section with gusset plates, rails,grills, gratings,spikes, braces, etc complete rilled for fixing of steel sheeting or other covreing Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covring , running rails and guides) and hanging also fastening and fixing complete Steel Fe 410-W(Gde-E250) Quality A. |
| 28 | M & L providing factory made 100% solid WPC (wood polymer composite) door frame 90 mm X 45 mm (straight) single rebated, made form wood polymer composite) Single extruded process) material compressing of virgin PVC polymer of K value 57-60 (suspension grade). calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nor toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treaded star headed screws having minimum frame density of 780 kg/ cbm. Manufactured by ISO 9001-2015 certified company , having good screw holding capacity (screw withdrawal strength of (Min 990 N) minimum compressive strength of 58 N/mm square, modulus elasticity 900N/mm square and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof & fire retardant & fixed in position with SS dash fasteners / hold fast of required dia the and lenght, all as directed by the engineer-in-charge. material test certificate and authentication should be compulsory provided by the manufacturing company (hold fast or dash fasteners shall be paid separately. |
| 29 | M & L providing factory made 24 mm Thick 100% solid WPC (Wood Polymer Composite) Plain/ laminated flush door shutter of required size comprising of virgin PVC resin of K value 57-60 (suspension Grade) calcium carbonate and natural fibers (wood powders/ rice husk/ wheat husk) and non toxic additives made from extrusion process WPC foam sheet single extruded (inner) with density not less than 650 kg/cbm. Manufacturred by An ISO 9001-2015 certified company having good screw holding capacity (screw withdrawal strenght of 2000N (Face) & 1100 N (Edge), minimum compressive strength of 50N/mm square, modulus of elasticity 850N/mm and resistance of spread of flame of class A category with property of being termite/ borer free. water / moisture proof and fire retardant and fixing stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws. all as per direction of engineer-in-charge, material test certificate and aughentication should be compulsory provided by the manufacturing company for WC/ bathroom/ toilet/ kitchen/ balcony doors. |
| 30 | S & F in repairs Galvnised mild steel wire cloth, 0.56mm conforming to I S nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, wooden beads or galvanised wire staples etc complete all as specified and directed. |
| 31 | Taking up or down existing steel tubing and connection complete for following sizes:- |
| 32 | (a) 15 mm dia |
| 33 | (b) 20 mm dia |
| 34 | Supplying, fixing, jointing and testing galvanised steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors, complete for the following sizes: - |
| 35 | (a) 15mm dia bore |
| 36 | (b) 20 mm dia bore |
| 37 | S&F in repair kitchen sink with drainage board made of stainless steel 1.0 mm thick in kitchen with plug , washer and waste including bedding layer in CM (1:6) in wall or including fixing cantilever bracket and connecting union to pipes over all size 915x460 mm bowl size 410x330x160 mm including taking out unserviceable kitchen sink complete all as specified and as directed. |
| 38 | Demolition of Brick work built in cement mortar including all quoins arches pillars etc complete all as specified and directed |
| 39 | M&L Brick work with fly ash brick straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 40 | M & L for reparing of RCC projection, chajjas,roofs,facia, colum etc by necessary preparation i.e scrapping ,cutting,chiseling,derusting and cleaning exposed reinforecement, surfaces of damaged, loose RCC surfaces and applying one coat of rust remover by brushing to rusted reinforecemnt to remove loose rust particles and allow to dry it for 2 to 3 Hrs , insert the new reinforcement to damaged portion by drillig hole at required distance , fill the epoxy in to the hole by 2/3 of the hole and insert the reinforcement in the hole, and binding the reinforcement at rusted portion of reinforcement, apply cement slurry on entire damaged area , and plaster the surfaces with cement , sand and Polymer liquid in 1: 3 : 15% of cement by weight ) and water as required , mixing properly and plaster the surface , finished even and smooth by making the edge water dropping groves complete all as specified and directed. Note : - Cost of formwork shall be deemed to be included. |
| 41 | M&L for rendering in cement mortar (1:6) 10mm thick first coat on fair faces of brick walls or concrete surfacesand in cm 1:4 5mm thick second coat over first coat , mixed with water proofing compound as per manufacturer instructions, finishe fair and even without using extra cement all complete as specified and as directed incl taking down existing plaster. |
| 42 | Supply only Integral water proofing compound complete all as specified and directed. |
| 43 | M&L for rendering 10mm thick plastering in CM (1:6) finished even & fair all as specified incl taking down plaster complete all as specified and directed.. |
| 44 | M&L for rendering 5mm thick in CM 1:3 as in soffits of ceiling and Rcc cjhaja/ Facia roof projections finished fair & even all as specified incl taking down plaster complete all as specified and directed. |
| 45 | M&L for applying three coats of white washing on new plastered surfaces of ceiling including preparation complete all as specified and as directed. |
| 46 | M & L preparing old decorated plaster or un-plastered surfaces of ceiling and applying one coat of white wash complete all as specified and as directed. |
| 47 | Complete removal of old treatment on internal surfaces of wall by scrapping , and washing etc all as specified. |
| 48 | M&L for applying 1 mm Avg thick wall care putty on wall on internal old/new wall surfaces as per manufacturerer instruction complete all as specified and as directed |
| 49 | M & L for applying two coats of oil bound distemper over a coat of primer on prepared wall putty surfaces of internal wall all as per specified and directed. |
| 50 | Demolition of cement concrete (un reinforced) in ground floor and paving n. exc. 15cm thickness (below or above ground level. |
| 51 | M&L for PCC 1:3:6 type C2 using 40mm graded aggregate 75mm thick as in plinth protection, finished concrete surfaces even and smooth without using extra cement |
| 52 | M & L for Surface excavation n. exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed |
| 53 | M & L PCC 1:4:8 type D-2 using 100 mm graded stone aggregate as in mas concrete complete all as specified and directed. |
| 54 | M&L for sand cushioning for Machine pressed precast concrete interlocking paver block including watering and consolidation. |
| 55 | M & L 60 mm thick Machine pressed precast concrete interlocking paver blockfixing with grey cement and pigments OF \\" I \\" shape or as approved by GE ,and any colour and size confirming to IS 15658-2006 of M-35 Grade set , laid over 50 mm (average) thick dust sand cushioning,filling of joints with sand & compaction using surface vibrator after filling of joints lain in any pattern as decided by Engineer-In-Charge including packing of sides by cement concrete finishing surfce even and smooth complete all as specified and as directed including demolition. Note : Sand cushioning shall be measured and paid separately . |
| 56 | S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to I . S 1161-1979 GDE ST 240 complete all as specifed and directed. |
| 57 | Treating the soil under the plinth protection at the rate of 5 litre of emulsion per square metre of surface area.complete all as directed and specified. |
| 58 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings including ridge portion, complete all as specified. |
| 59 | S & F Pre-painted galvalum aluminium zinc coating steel based corrugated steel sheet 0.50mm thick (total coated thickness) of any colour having tensile strength of 550 Mpa minimum, yeild strength, it shall be coated with hot dip alloy of 55% aluminimum, 43.5% zinc,1.5% Silicon and finished with resin coat on both surface @ 150 gm/ sqm of coating as specified and shall be fixed with hot dip galvanised, self drilling and self tapping screws neoprened and EDPM washers as in roof covering all as directed at site all as specified and dircted. |
| 60 | S & F Pre-painted galvalume aluminium zinc coating GI based profile plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in ridge covering/cladding to wall, valleygutter, fixed with self tapping screws as specified and directed. |
| 61 | M&L Two coats of exterior emulsion paint ( Apex ultima or weather coat) with primer , white or tinted on old/New surfaces of walls including prepration of old/New surfaces and washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and directed. |
| 62 | M & L for preparation of new or previously untreated steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over of redoxide zinc chrome coat complete all as specified and as directed. |
| 63 | Excavation in trenches, exceeding 1.5 M wide and not exceeding 3.0 M depth for foundation, etc., and getting out in soft/loose soil. |
| 64 | Removing Excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point. |
| 65 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick with soils. |
| 66 | M&L for RCC M25 design mix using 20mm graded aggregate as in footings complete all as specified and directed. |
| 67 | M&L for RCC M25 design mix using 20mm graded aggregate as column complete all as specified and directed. |
| 68 | M&L for RCC M25 design mix using 20mm graded aggregate as beam, roof beam,plinth beam lintel,arches all as specified and directed. |
| 69 | M&L for MS \\"TMT\\" bars 10mm dia and over in reinforcement, cut to length, bent to shape required including crnaking, bending sprially for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with chips. complete all as specified. |
| 70 | Description all as per ser item No. 65.00 above but for 5mm dia and over upto 10mm dia and including 10mm dia in stirrups, spacers and binders. complete all as specified. |
| 71 | M&L for Form work to sides & soffits of plinth beam and sides of footings getting rough finished surfaces of concrete, complete all as specified. |
| 72 | M&L for Form work to sides of columns getting rough finished surfaces of concrete, complete all as specified. |
| 73 | Supplying and fixing, Fabricating, Assembling, hoisting, erecting and placing in position MS Built-up section/ Tubular Structure (MS built-up section:- Rolled section & plates confirming to IS 2062 Grade Yst 350, Tubular Structure:- made from Steel hollow sections, ISI marked from APL APOLLO/ TATA/ JINDAL) in the profile shape as per drawings with special plate connector, pinion joints, Plates, hollow sections etc. With special plate connectors, pinion joints, plates, hollow sections including preparation of detailed fabrication, erection shop drawings of Structural steel work from design drawings, including transportation, cutting, wastage, threading, machining, leads and lifts upto all heights, tools and plants and necessary scaffolding etc. required for all operations involved to make structure of Tensile Membrane shade, the tubular structure system with plate connectors, pinion joints, etc. The structure has to be provided as per conceptual drawings of Tensile fabric profile, including all arch beam, curved lateral beams and bracings, vertical support columns, nodal joints, bases of columns and high tensile bolts of grade having black phosphate coating. The complete structures to be painted with one coat of red oxide metal prime with zinc chromate conforming generally to is 2074 and two coat of stain resistance premium gloss enamel/ Automotive, paint of approved brand Asian/ Berger/ Akzo Nobel ICI etc. The MS frame shall be cleaned of dirt/ grim and oil/ grease deposit. The frame shall be sand papered to remove rust. The frame shall be sprayed with red oxide metal prime to finish and will not have any paint brush streaks. After primer putty shall be manually filled at joints and dents if any. It will be wet sand papered to a smooth glossy finish, ready surface will be painted 2 coats of high gloss Nitrocellulose (NC) Lacquer/ automotive paint, complete all as per specifications & drawings. |
| 74 | S&F for PVC tensile fabric structure with PVDF (polyvinyl-idene-fluoride) coating with steel Cables and GI corner fittings, nuts and bolts and associated accessories, all necessary fixtures, of any size and shape for making Canopies, shed etc. fixed with mild steel structural frame work, weight of the fabric is considered, with fabrics ranging from 900gsm to 1200 gsm .The tensioned membrane structure shall include Fabric, Wire Ropes and Cables, Shackles, Rigging Screws, Clamps and tensioning hardware complete all as specified. Note : (a) The shape/ design of the sheds will be as approved by GE. (b) Cost of structural steel used will be measured and paid separetly under relevant items in BOQ |
| 75 | M&L for SS letters box type of size n exc 30cm in height and n exc 30mm in width in english/hindi in any colour complete all as specifed and directed. |
| 76 | M & L Aluminium Composite Panels (ACP) of exterior grade for cladding near entrance of Alucobond / Alstrong / Eurobond or approved equivalent make for external wall / column / canopy/partition cladding in combination of solid / Metallic colours, including all necessary frame work and complete weather sealing. The composite panel should consist of 3mm thermoplastic core of LDPE sandwiched between 2 skins of 0.5mm thick aluminium sheet (alloy designation 310S) making a total panel thickness of 4mm. The surface will be furnished with Lumiflon based flourcarbon coating on top sides and service coating on reverse side. Coatings shall conform to specifications of specifications of ECCA / AAMA and conforming to the mechanical properties of panel as per detailed technical specifications. the system shall be fixed using GI brackets and stainless steel bolts and nuts complete with spring washers and cap nuts and all other necessary accessories. The bracket support shall be designed as per manufactures specification and shall withstand a wind pressure of 150 kg / sqm. all hardware shall corrosion resistant frame out of anodised aluminium member, including taking down of old sheet alongwith all fittings, complete all as specified. Above works including Steel frame work for design the existing structure and give the new look as per directed |
| 77 | M&L Jaisalmer yellow/white/Red sand stone with hammer dressed face work (with maximum depression form staright edge held against the dressed surface not exc 20mm) about 40mm high, 75mm deep in straight courses laid and jointed in cement and stone admisxture of white cement and sandstone dust 1:1 complete all as specifed and directed. |
| 78 | S&F in repair toughned glass 12 mm thick as in hinged doors, partitions automatic doors, partition of wall and similar work including glazing with beads fixed with metal panel pins cutting to shape, drilling hole with necessary arrangements for fixing also included handles, hinges, support channel for fixing in any position, complete all as specified and directed. |
| 79 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement |
| 80 | Excavating in trenches , n' exc 1.5m wide and n'exc. 1.5m in depth for foundation , etc. or for shaft ,wells and cesspits in hard / dense soil complete all as specifed and directed. |
| 81 | M&L for hardcore of broken or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface |
| 82 | M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering etc complete all as directed. |
| 83 | M&L PCC 1:4:8 type D2 using 40mm grade stone aggregate as in foundation concrete complete all as specified and directed. |
| 84 | M&L PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) in foundation concrete and mass concreting of manholes etc complete all as specified and as directed. |
| 85 | M&L PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate )in benching to man holes and finishing of exposed surfaces of concrete etc complete all as specified and as directed. |
| 86 | M&L PCC 1:3:6 type C-1 (using 20mm graded stone aggregate )as in coping including necessary formwork and finishing of exposed surfacs of concrete etc complete all as specified and as directed. |
| 87 | M&L for precast concrete 1:2:4 type B-1 (using 20mm graded stone aggregate)in manholes covers set in CM 1:4 including necessary form work (Note :-Reinforcement will be measured and paid separately) including necessary form work etc complete all as specified and as directed. |
| 88 | M&L RCC (nominal mix) 1:2:4 type B-1 (using 20mm graded stone aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete etc complete all as specified and directed |
| 89 | Description all as per ser item No. 84.00 above but in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc complete all as specified and directed |
| 90 | Description all as per ser item No. 84.00 above but Beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and directed |
| 91 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms / moulds / mitred / stopped ends etc complete all as specified and as directed. |
| 92 | Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 etc complete all as directed |
| 93 | M&L for brick work with old size sub class 'B' bricks straight or curved on plan exc. 6m mean radius and built in CM 1:4 etc complete all as directed. |
| 94 | M&L for brickwork with subclass ‘B’ old sized bricks, straight or curved on plan to any radius in half brick thick walls and built in CM 1:4 etc complete all as directed. |
| 95 | M&L joints in the plinth protection filled with mastic filling comprising of 1 part of heated bitumen 85/25 or 90/100 grade and 3 part of sand (all the weight)20MM THICK in CM1:2 complete all as directed. |
| 96 | Cutting chases in brick masonry walls built in cement mortor for concealed water tubing or concealed conduit wiring, etc., and making good in CM 1:3, cutting not exc 10 cm girth etc complete all as directed. |
| 97 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter |
| 98 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings,flats and similar work; n. exc 200m thick (Horizontal or sloping) |
| 99 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. |
| 100 | S&F 30 mm thick Factory Made Solid Panel PVC Door Shutter consisting of frame made out of M.S. tubes of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC sheet 5mm thick ‘C’ channel having a 5mm thick PVC sheet strip of 20mm width stuck inside with solvent cement, forming stiles, and plain colour PVC sheets for top rail, lock rail & bottom rail on either side, and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s instructions and drawing. The width of stiles & rails will be in proportion to the width of the door shutter as per SSR Clause No 8B.2.1 |
| 101 | Description all as per ser item No. 96.00 above but fully Louvred complete all as specifed and directed. |
| 102 | M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing etc complete all as directed. |
| 103 | S&F 150 mm size aluminum anodised, barrel tower bolts of extruded section etc complete all as directed. |
| 104 | S&F aluminum alloy anodised, sliding door bolts with hasp and staple, (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminium alloy and fixed 300mm long etc complete all as specified and directed. |
| 105 | M&L for cleaning of roof surfaces and applying a coat of bituminous primer @ 0.25kg per sqm including laying torch applied APP torch membrane 3.5kg / Sqm with non woven polyster mat as reinforcement , with 100mm side lap and 150mm end lap Apply aluminium bituminous paint 0.11 Kg / sqm, M/s. Texas Ltd.( formerly known as STP Texsa Ltd ) “MOPLY FV - 3 OR . HYPERPLAST OF IWL INDIA LTD. complete all as directed. |
| 106 | M&L PCC 1:3:6 type C1 40mm thick laid in slope of 1:20 and alternate bays incl finished even and smooth without using extra cement and joints in the plinth protection shall be filled with mastic filling comprising of 1 part of heated bitumen 85/25 or 90/100 grade and 3 part of sand (all the wt) |
| 107 | M & L for Non - skid/Glossy finish/Matt finish joint free coloured ceramic tiles 7 to 8 mm thick (square/rectangular) laid in floors area of each tile exc. 0.06 sqm but n.exc 0.11 sqm, in floors etc. with and incl 15mm thick screed bed in CM 1:6 , set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as directed. |
| 108 | M&L 10mm thick bedding layer in CM 1:4 on roof top surfaces mixed with integral WPC 2% by weight of cement and finishing the same even and smooth without using extra cement etc complete all as directed. |
| 109 | M&L for rendering 15 mm thick in CM 1:4 mixed with water proofing compound on brick or concrete surface (Note :- WPC will be measured and paid separately) finishing the surface even and smooth with using extra cement etc complete all as specified and as directed. |
| 110 | M&L for 15 mm thick rendering in CM 1:4 on brick/concrete external surfaces of walls with sand faced sponge faced finish etc complete all as directed. |
| 111 | M&L for preparation of newly plastered surfaces of walls and applying one coat of alkali resistant primer over a coat of birla white / JK cement putty,sanding the surfaces till smooth finish is obtained and finally applying two coats of oil emulsion distemper etc complete all as directed. |
| 112 | M&L for preparation of newly plastered surfaces of walls and applying two coats of cement based paint etc complete all as directed. |
| 113 | S & F 4.00 mm thick figured glass pin headed tupe fixed in ventillators etc complete all as directed. |
| 114 | S&F in repairs 32mm bore dia high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as directed. |
| 115 | S&F 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I etc complete all as directed |
| 116 | S&F 15mm bore bib taps, chromium plated cast copper alloy quarter turn long body screwed down, screwed for iron pipe etc complete all as directed |
| 117 | S&F 15mm bore pillar taps, chromium plated cast copper alloy quarter turn long body screwed down, screwed for iron pipe etc complete all as directed |
| 118 | S&F 15mm bore stop valves, chromium plated cast copper alloy quarter turn long body screwed down, screwed for iron pipe with long shank and cup (concealed type) etc complete all as directed |
| 119 | S&F 20mm bore gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe etc complete all as directed. |
| 120 | S&F 20mm bore ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe etc complete all as specified. |
| 121 | S&F shower arm 15mm size, 195mm long with bend of 45degreee with flange of PTMT any colour. (Minimum weight 40 gms) |
| 122 | S&F fancy type Brass chromium plated 600mm long Towel Rod fixed with screws and wooden/plastic cleats etc complete all as directed. |
| 123 | S&F PVC connections 15mm size with PTMT nuts of length 450mm etc complete all as directed. |
| 124 | S&F 75mm bore of pipe PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors etc complete all as directed. |
| 125 | Description all as per ser item No. 120.00 above but 110mm dia complete all as specifed and directed. |
| 126 | S&F 110mm bore of pipe PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls etc complete all as directed. |
| 127 | S&F 75mm bore of pipe PVC (SWR) bends any radius with access door etc complete all as directed. |
| 128 | Description all as per ser item No. 123.00 above but 110mm dia complete all as specifed and directed. |
| 129 | S&F 110 mm bore of pipe PVC (SWR) plain bends any radius etc complete all as directed. |
| 130 | S&F 110mm bore of pipe PVC (SWR) vent cowl etc complete all as directed. |
| 131 | S&F Cast iron Nahani trap with diameter of outlet 75mm with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) etc complete all as directed. |
| 132 | M&L for 1:4:8 type D-2 (40mm graded stone aggregate)Concrete bed to drain pipes including forming cradles against the sides of pipe after they are laid and tested for 150 mm bore of pipe etc complete all as specified and as directed. |
| 133 | Supply and lay Reinforced concrete pipes 150 mm bore of pipe class NP2 laid in trenches and jointed complete with collars etc complete all as specified and directed. |
| 134 | Cutting into existing manholes for connecting new drains, 150mm internal dia of pipe making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required |
| 135 | S & F glazed earthen ware viterous china squatting pan, `Orissa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) white coloured etc complete all as directed. |
| 136 | S&F glazed earthen ware viterious china wash basin white coloured flat back size 550x400mm, outlet of 32mm bore HDPE outlet pipe with necessary fittings, 32mm bore brass CP waste couplings etc complete all as directed. |
| 137 | S & F PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle, including brackets etc complete all as directed. |
| 138 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers etc complete all as directed |
| 139 | S&F fancy type Brass chromium plated soap dish fixed with screws and wooden/plastic cleats etc complete all as directed. |
| 140 | M & L 100 mm thick Cement concrete type B-1, 1:2:4 (40mm graded aggregate) as in sub base.in cement mortar 1:6 and ponted in 1:3 complete all as specified and directed. |
| 141 | M&L for 40mm thick PCC 1:2:4 type B0 (12.5mm graded aggregate)mixed with WPC at 2% by weight of cement, complete all as specified and as directed. Note: WPC shall be measured separately. |
| 142 | Removing debris out of MD Land to a distance n. exc 1.5Km complete all as specified & directed. |
| 143 | Taking down copper /aluminium point wiring (light, fan, bell, socket or power) complete including fixture and fittings such as switches, ceiling rose, pendent, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition separately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed at site. |
| 144 | Taking down ceiling fan/ exhaust fan/ wall fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of concerned AGE E/M complete all as specified and as directed. |
| 145 | Taking down old / unserviceable distribution board/meter single phase by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed. |
| 146 | M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC FRLS concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches and blank plates, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :- |
| 147 | (a) One light point controlled by one, one way switch 5 Amps |
| 148 | (b) One fan point/ wall fan/exhaust fan point controlled by one, one way switch 5 Amps and regulator |
| 149 | (c) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 150 | (d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board. |
| 151 | Description all as per item No.142.00 here in before but using 2.5 sq. mm single core copper conductor cable of multistranded FRLSH PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point including necessary running of 2.5 sq. mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly. |
| 152 | S & F for Modular Switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as specified. |
| 153 | S & F for Modular Switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified. |
| 154 | S & F for Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified. |
| 155 | S & F for Modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified. |
| 156 | S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed. |
| 157 | S & F for Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified |
| 158 | S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnetic locking system, IP 43, IK 09 protection including necessary provision for inserting the DBs in wall by cutting the brick/stone masonry etc and making good of disturbed surface to match with existing colour of wall complete all as specified and as directed. |
| 159 | S & F for MCB Single pole and neutral rated capacity 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve, and of the same make as above item complete all as specified and as directed. |
| 160 | S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve, and of the same make as above item complete all as specified and as directed. |
| 161 | S & F for ceiling fan, 230 Volts, 50Hz, 1200 mm sweep with down road, canopy, blades, BLDC motor etc and service value of the fan shall be greater than equal to 7.1 (without remote) as per BIS with necessary accessories and electrical connections from ceiling rose to fan terminal including writing the MES Number with synthetic enamel paint complete all as specified and as directed. |
| 162 | M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe up to 7.5 mtr from earth plate is deemed to be included in rate quoted. |
| 163 | S&F in repairs 20 W LED batten 4 feet long, wall mounted, with integrated electronic driver, ISI marked complete all as specified and directed. |
| 164 | Supplying, testing and laying of XLPE armoured insulated, screened, pvc bedded UG cable 1100 volts grade of size 25 sqmm 2 core all as specified and directed by engr in charge |
| 165 | M & L LED flood light 200W with cast aluminium housing toughened glass cover, high efficient LED, IP 65/66, 10 KV SPD>100 lm/watt and wired with all accessorie, complete all as specified and directed by Engr-in-Charge |
| 166 | M & L LED flood light 100W with cast aluminium housing toughened glass cover, high efficient LED, IP 65/66, 10 KV SPD>100 lm/watt and wired with all accessorie, complete all as specified and directed by Engr-in-Charge Please Enable Macros to View BoQ information |
| 167 | M & L LED flood light 100W with cast aluminium housing toughened glass cover, high efficient LED, IP 65/66, 10 KV SPD>100 lm/watt and wired with all accessorie, complete all as specified and directed by Engr-in-Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender