Tender For Annual Afloat Repair Works Of Ad Manimala At Iwt Maradu Terminal Kochi, During The Year 2026-27
Tender Value
6.85 Lakhs
Estimated cost
Bid Submission
05 Sep 2026
13 days left
EMD
14000
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annual Afloat Repair Works Of Ad Manimala At Iwt Maradu Terminal Kochi, During The Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Surface preparation of chipping, wire brushing, cleaning & paintings for complete structure includes side pontoons, main pontoon from above water level surfaces, boom, service crane, side railings, front stabilizers, rear spuds, wheel house, engine top shielding cover plate, air bends, vents, hatches & other onboard machinery etc. 1.) Side pontoons - 2 no: 20.00 Sq.m, 2) Main pontoon - 1 no : 70.00 Sq.m, 3.) Boom and cylinders for arm, bucket etc–1no:30.00 Sq.m Labour & material charges |
| 2 | Painting of entire area (as mentioned above in S.L.No:1) and other out fittings with 2 coats of epoxy primer and 2 coats of epoxy marine quality enamel of existing colour. 1.) Side pontoons - 2 no : 20.00 Sq.m, 2) Main pontoon - 1 no : 100.00 Sq.m, 3.) Boom and cylinders of arm, bucket etc–1 no:30.00 Sq.m Labour & materail charges |
| 3 | Reneval and welding of MS plate of thickness 5mm of ship building quality provision for unseen plate renieval after chipping, wire brishing etc, including labour and material cost. |
| 4 | Strengthening of Side railings (Port & STBD sides) Size: 40 X 40 mm & 40 X 20 mm square & rectangular pipe respectively on on-board dredger to be properly welded at damaged potions at the base portion as per Marine standard includes labour and material cost. |
| 5 | Re-writing of the vessel name and identification details in the existing typeface, design, size, and colour. The scope also includes marking the vessel name, registration number, and port of registry on all Life Saving Appliances (LSA) and Fire Fighting Appliances (FFA) with clear visibility, in accordance with KIV rules and applicable statutory requirements. The quoted price includes all labour, materials, equipment, and consumables required to complete the work. |
| 6 | Supply and fitting of toilet door, light foundations, and canopy support leg, including dismantling of damaged components, supply, fabrication (if required), installation, alignment, and fixing complete with all necessary hinges, brackets, bolts, nuts, washers, and associated fittings. The work shall include testing and making the toilet door, light foundations, and canopy fully functional. The rate shall be inclusive of all labour, materials, consumables, tools, tackles, transportation, and incidental charges required for the satisfactory completion of the work. |
| 7 | Charges for Repairing of the Engine Room door, including rectification of damaged portions, renewal of damaged thermal/acoustic insulation, replacement of defective hinges, locking arrangements, fasteners, and other associated fittings as required. The work shall include refitting, alignment, testing, and making the door fully functional and properly insulated. The rate shall be inclusive of all labour, materials, consumables, tools, tackles, transportation, and incidental charges required for the satisfactory completion of the work. |
| 8 | Supply and installation of a new DC fan of approved make and suitable capacity, complete with all necessary fittings, wiring, labour, testing, and commissioning, to make the unit fully operational. |
| 9 | Cost of spares (on actual + 10% basis) will be reimbursed |
| 10 | Charges for Renewal of glass beading for 5 Nos. cabin windows, including removal and refitting of the existing glass, supply and fitting of new rubber beading, renewal of weather-tight sealing, application of sealing compound, testing, and making the cabin windows completely weather-tight and fully functional. The rate shall be inclusive of all labour, materials, consumables, and incidental charges. |
| 11 | Charges for Overhauling of starter motor, including dismantling, inspection, cleaning, replacement of worn-out or defective components such as bearings, bushes, brushes, solenoid, pinion gear, springs, and other associated parts as required, reassembly, testing, and commissioning to ensure satisfactory operation. The rate shall be inclusive of all labour, consumables, testing, and incidental charges. |
| 12 | Cost of spares (on actual + 10% basis) will be reimbursed |
| 13 | Renewal of the operator's cabin seat cover by supplying and fitting a new seat cover of suitable quality and specification, including removal of the existing damaged seat cover, installation of the new cover, and necessary adjustments to ensure proper fit and finish.The quoted price includes all labour, materials, consumables, and equipment required to complete the work. |
| 14 | Repair of damaged curved M.S plate of front balloon STBD side by cutting and removal of lower portion and strengthening the inner structure & top holder portion by replacing the damaged plates with new one and renew the lower portion with new M.S plate size: 2 M X 2 M with thickness 6 mm existing circular curved shape as per marine standard and also . Labour and material cost. |
| 15 | Servicing of the Port side Stabilizer hydraulic cylinder, including dismantling, inspection, cleaning, replacement of worn or damaged seals (if required), reassembly, pressure testing, installation, alignment, and functional testing to ensure satisfactory operation and also chroming of the shaft and make in good condition.The quoted price includes all labour charges required for the servicing work and machining charges. |
| 16 | Cost of spares (on actual + 10% basis) will be reimbursed |
| 17 | Supply and fitting of a hydraulic oil pressure gauge of suitable range and specification, including all necessary fittings, adapters, mounting hardware, installation, testing, and commissioning to ensure accurate pressure indication and proper system operation. |
| 18 | Cleaning of the hydraulic oil tank, including draining of hydraulic oil, opening the tank, removal of sludge, sediments, and contaminants, thorough internal cleaning, inspection of the tank interior, refitting of covers with new gaskets (if required), and preparation for refilling with hydraulic oil. The quoted price includes all labour, cleaning materials, consumables, and equipment required to complete the work. Hydraulic oil and replacement spare parts, if required, shall be supplied and charged separately. |
| 19 | Rectification of radiator leakage, including inspection to identify the source of the leak, repair of the damaged area by suitable welding, brazing, or sealing method (as applicable), pressure testing, refitting, and functional testing to ensure the radiator is leak-free and operating satisfactorily.The quoted price includes all labour, materials, consumables, and equipment required to complete the repair. Any major replacement parts, if found necessary after inspection, shall be supplied only upon approval and charged separately. |
| 20 | Boring of the arm side lower lock pin housing to restore the correct bore size and alignment, including dismantling (if required), machining, measurement, and inspection. The work shall be carried out to achieve the specified fit for the lock pin and ensure smooth operation.The quoted price includes all labour, machining, charges |
| 21 | Cost of spares (on actual + 10% basis) will be reimbursed |
| 22 | Fabrication and renewal of the cabin base foundation pad, including removal of the damaged foundation pad (if required), fabrication of a new pad to the required dimensions, fitting, welding, alignment, surface preparation, and application of primer to ensure proper structural support and satisfactory installation. The quoted price includes all labour, materials, consumables, welding, and equipment required to complete the work. |
| 23 | Replacement of both boom turning lock pins, including removal of the existing lock pins, supply and installation of new lock pins of the correct specification, alignment, lubrication, adjustment, and functional testing to ensure smooth, safe, and reliable operation. The quoted price includes all labour, materials, consumables, and equipment required to complete the work. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysSep 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender