Supply Of 3 Phase Contactor NHD series

Sharing tender

Supply Of 3 phase contactor nhd series , 3 phase contactor nhd series 4 pole ac control contactor magnetic coil ac 3 rating 50 amp, coil voltage380/415 v ac, as per bch model : nin with top mounting auxiliary contact block one 1 no + 1 nc. make: - bch or havells or siemen or l&t or jeevan. [ warranty period: 30 months after the date of d elivery ] ] , 3 phase contactor nhd series 4 pole ac control contactor magnetic coil ac 3 rating 25amp, coil voltage380/415 v ac with top mounting auxiliary contact block one 1 no + 1 nc. make:- bch or simila r of havells or siemens or l&t. [ warranty period: 30 months after the date of delivery ] ] , limit switch- oil tight and dust proof, die cast aluminum housing suitable for 415 volts (or ab ove), 50 hz, 10amp. ac supply for quick braking, spring loaded lever with roller 01 no.+01 nc auxiliary co ntact with normal angular lever as per essen model type lsrs or bch catalogue code no.-llgs. mat spec n. is-2147/ 1962(or latest), ies: 60947-5-1, ip-65 or similar of make- bch or l&t or jeevan/schineider or sie mens or essen. [ warranty period: 30 months after the date of delivery ] ] , pendent type push button assly. with 02 nos. of normally open type push button suitable for cable entry arrangement for 35t jack. (fiber body) qty.- 01 nos. make: - bch or havells or siemen or l&t o r jeevan or snt. [ warranty period: 30 months after the date of delivery ] ] , dol starter individual for 10hp motor :- air brake direct on line starter with 2 sets of 3 pole c ontactor each set controlled separately by 415v, 50hz, ac contactor coils. one set contractor coils is to be controlled by the forward direction of rotation through an inching type push button and the other set throug h another inching button to control the reverse direction of 10 hp, 3 phase, 50 hz 415 volts ac motor. ther e must be electrical enter locking contact to prevent both set of contactors to close simultaneously. each of above push buttons should have one normally closed auxiliary contacts and one stop push button. the star ter shall be complete with over load, shall be wired and shall be provided with power plug and socket with looking arrangement as per schematic diagram mention below. 1.drg. no.10 hp jack bom, 2. drg. no. 10 hp jack ckt, 3. drg. no. 10hp jack ga each starter to be provided with 2 nos. power plug and socket and 2 nos. of control plug and socket. maximum dimension 280 mm (b) x 360 mm (l) x 162 mm (t). as per mat erial specification is: 13947 part-4 sec-1 1993. make-bch or snt or havells. [ warranty period: 30 month s after the date of delivery ] ] , dol starter (master) for 40hp :- air break direct on line starter wall mounting type with push button control. suitable for 3phase, 50hz, 415v,40 hp motor. the starter shall be complete with over load and no volt protection. citation dol motor starter in sheet steel enclosure with citation e contactor (with 3 80-415 v coil) cat ref: nact2leem, over load relay range (37.6 to 60a), 70a contactor, citation e contactor is very rugged and reliable contactor has mechanical interlocking facility. make: bch or l&t or havells. [ w arranty period: 30 months after the date of delivery ] ] , (i) 4 pin plug & socket, 30a, 415v, ac, 3p+e. make: - bch or havells or siemens or jeevan. (ii ) 5 pin plug & socket, 30a, 415v, ac, 3p+n+e. make: - bch or havells or siemens or jeevan. [1 set consisti ng of sl no. (i) 1 no. each & sl no. (ii) 1 no. each.] [ warranty period: 30 months after the date of deliver y ] ]