Tender For Various Traffic Improvement Work In Zone- C-2 Area, Jda Jaipur
Tender Value
1.68 Crore
Estimated cost
Bid Submission
29 Aug 2026
8 days left
EMD
3.36 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Various Traffic Improvement Work In Zone- C-2 Area, Jda Jaipur
BOQ
| Sl. No. | Item Description |
| 1 | Interlocking Concrete Block Pavement with M-30Grade 0.30 Mtr x 0.30 Mtr x 0.15 Mtr Edge Blocks(measurements shall be made inner to inner side ofedge blocks).Providing and Laying of Interlocking M-30 gradeConcrete Block Pavements having thickness 60 mm asper drawings and as per IS 15658:2006.and materialsconforming to MoRTH Specification Clause 602 withM-30 Grade 0.30 Mtr x 0.30 Mtr x 0.15 Mtr EdgeBlocks.Category 'B' : Dentated only two side like I,Z,T shapeas per IRC:SP:63-2004 |
| 2 | Interlocking Concrete Block Pavement with M-30Grade 0.30 Mtr x 0.30 Mtr x 0.15 Mtr Edge Blocks(measurements shall be made inner to inner side ofedge blocks).Providing and Laying of Interlocking M-30 gradeConcrete Block Pavements having thickness 80 mm asper drawings and as per IS 15658:2006.and allmaterials shall conform to MoRTH SpecificationClause 602 with M-30 Grade 0.30 Mtr x 0.30 Mtr x 0.15Mtr Edge Blocks.Category 'B' : Dentated only two side like I,Z,T shapeas per IRC:SP:63-2004 |
| 3 | Interlocking Concrete Block Pavement with M-30Grade 0.30 Mtr x 0.30 Mtr x 0.15 Mtr Edge Blocks(measurements shall be made inner to inner side ofedge blocks)Providing and Laying of Interlocking M-30 gradeConcrete Block Pavements having thickness 100 mmas per drawings and as per IS 15658:2006.and allmaterials shall conform to MoRTH SpecificationClause 602. with M-30 Grade 0.30 Mtr x 0.30 Mtr x0.15 Mtr Edge Blocks.Category 'B' : Dentated only two side like I,Z,T shapeas per IRC:SP:63-2004 |
| 4 | Marking Centre Line and stop lines etc. on road as perIRC pattern with thermoplastic paint of approvedquality and make with 8% glass beads laid on the roadsurface at temperature 160\\" C with a special applicatormachine complete with a special applicator machinecomplete with labour material and traffic diversionarrangements. |
| 5 | Providing & Fixing of Vicro Spring Post made ofFlexible PU UV Stabilized, Excellent ESCR, No rust Nochip, size 80X750 mm with round 3 no radium tapedesinbed for max ageing resistance under sunlighthaving upper dia 15 cm. and lower dia 20 cm withanother attachment of 15x15 cm circular section with15 cm. face plate and hold fast at bottom as perdirection of Engineer In Charge |
| 6 | Providing & Fixing of ABS Plastic rectangle crumb ofSize 250mm X 125mm X 28mm fixing with nail andvicro epoxy at interval for prevent of accident requireboth side reflector of specific size with visibility at least100mtr |
| 7 | Providing, fixing, maintaining, shifting & refixing,barricading of a steel portable barricade with horizontalsheet 0.60 mtr wide, 2.4 mtr in length fitted on a “A”frame and sheet painted with 2 coats of yellow paint,lettering (CAUTION, JDA AT WORK, DRIVE SLOW) onsheet with RED paint & border with reflective paint atthe time of every shifting, traffic diversion arrangement,safety guard, suitable lightning arrangement duringnight if required, complete in all respect till completionof the project as per technical specification anddirection of Engineer-In-charge and same shall bepossessed by the contractor after completion of theproject. Payment under this item will be released:- (1)50% at the time of providing new barricading at thetime of start of project at location and plan as approvedby the Engineer & certification (2) 50% Aftercompletion of project including shifting, re-erecting andmaintaining the barricading in position, during entireconstruction tenure with requisite manpower/flagmanetc. Complete for guiding traffic and safety etc anddismantling after completion of project. |
| 8 | Supplying & Installation of Solar Raised PavementMarkers made of polycarbonate molded body withcircular shape, solar powered, LED self illumination inactive mode, 360 degree illumination and reflectivepanels with micro prismatic lens capable of providingtotal internal reflection of the light entering the lensface in passive mode. The marker shall support a loadof 20000 kg jested in accordance to ASTM D 4280.The marker should be resistant to dust and wateringress according to IP 65 standards and shouldwithstand temperatures in the range of 0C to 70 C.Color of lighting could be provided in red or yellow(amber) as per requirement and typical frequency ofblinking is 1 Hz. There should be current losses of lessthan 20 micro-amperes at 2.4 V in sleep-chargingmode to enhance the life of the marker and a fullcharge should provide for a minimum autonomy of 50hours. The height, width and length of the marker shallnot be less than 10 mm X 100 mm X 100 mm. Also thesurface diameter of the marker shall not be less than100 mm respectively. The weight of the marker shallnot exceed 0.5 Kilograms. Fixing will be by drillingholes on the road for the shanks to go inside, withoutnails and using epoxy rasin based adhesive as permanufacture’s recommendation and complete asdirected by the engineer. (manufactured from 3M orequivalent) |
| 9 | Providing and fixing reinforced concrete precast kerbstone or dand R.Mtr of M-20 grade cement concrete120 cm long having 4 Nos. bars of 8 mm dia hysd andstirrups 6 Nos of 6 mm dia as per IS with in builtprovision of interlocking of jointing and liftingcompaction of reinforced concrete by mechanical andtable vibrators jointing at site with cement mortar 1:4complete in all respect as directed by Engineerincharge on: 100 mm thick cement concrete 1:4:8 (1Cement : 4 Coarse sand : 8 stone aggregate 20 mmthick nominal size) including excavation of earth andcutting of BT road cutting of WBM road etc. anddisposal of surplus material with all lead and lift. Thesize of kerb shall be (11.5+16.5)/2*30+(16.5*7.5) |
| 10 | Supply of ‘L’ type Bollard made out of 1.25 mm thickM.S. sheet height 134 cm, welded in circular type ringsection having upper dia 15 cm. and lower dia 21 cmwith another attachment of 15x15 cm circular sectionwith 15 cm. face plate and hold fast at bottom, wholebody is processed in white stoving enamel and redreflective 3 hands, each of 7.5 cm end one reflectivesheet of 15 cm. dia provided to it complete in allrespect. |
| 11 | Supply of Hazard Marker made out of 2 mm thick M.S.sheet size 300x300x3 mm framed with angle iron25x25x3 mm and fixed on channel posts 75x40x6 mmand hold fast at bottom whole body is painted in whitestoving enamel and 6 Nos., 5 cm dia reflective sheeton white reflective background with additional border of1.25 cm all arount it. |
| 12 | Supplying and Fixing of Cat’s Eye made of aluminiumalloy size 75x100x22 mm having 21 biconvex lensesembedded in circular disk of ABS plastic on each side. |
| 13 | Provision of reinforced cement concrete crash barrierat the edges of the road, approaches to bridgestructures and medians, constructed with M-20 gradeconcrete with HYSD reinforcement conforming to IRC:21 and dowel bars 25 mm dia , 450 mm long atexpansion joints filled with pre-moulded asphalt fillerboard, keyed to the structure on which it is built andinstalled as per design given in the enclosure toMoRTH Circular No. RW/ NH- 33022/ 1/ 94-DO IIIdated 24th June 1994 as per dimensions in theapproved drawing and at locations directed by theEngineer , all as specified as per MoRTH specificationCl. 811.2. |
| 14 | Providing and fixing steel gate, grating , and grillsmade of angles, tees, square bars, flats,or black pipewith holdfast and fittings complete as per design anddrawing including cutting welding and fabrication withpriming coat of red oxide |
| 15 | Extra if square,rectangular hollow tubelar sections areused or grill made by flats only |
| 16 | Providing and laying in position cement concreteincluding curing, compaction etc. complete in specifiedgrade excluding the cost of centering and shuttering-Allwork up to plinth level. 1:4:8 (1 cement : 4 coarse sand: 8 graded stone aggregate 20 mm nominal size) |
| 17 | CEMENT CONCRETE (CAST-IN-SITU):Providing and laying in position cement concreteincluding curing, compaction etc. complete in specifiedgrade excluding the cost of centering and shuttering -All work up to plinth level.M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarsesand : 4 graded stone aggregate 20mm nominal size). |
| 18 | Providing and fixing of Reinforced Ferro cement Draincover designed for class \\"AA\\" loading duly marked oncover with adequate steel reinforcement havingthickness 75 mm to 150 mm anti- corrosive bitumenpainted M.S. plate Rim and on M.S. lifting hooksadmixture like plasticizer bond improving compoundshrinkage resistance compound abrasion resistantcomplete as per approved design etc.for drain Opeining Size 451 to 700 mm Standard DrainCover Size 1000mm x 800mm x 100mm |
| 19 | Providing and fixing of Reinforced Ferro cement Draincover designed for class \\"AA\\" loading duly marked oncover with adequate steel reinforcement havingthickness 75 mm to 150 mm anti- corrosive bitumenpainted M.S. plate Rim and on M.S. lifting hooksadmixture like plasticizer bond improving compoundshrinkage resistance compound abrasion resistantcomplete as per approved design etc.for drain Opeining Size 701 to 1200 mm StandardDrain Cover Size 1500mm x 600mm x 125mm |
| 20 | Providing and fixing of Reinforced Ferro cement Draincover designed for class \\"AA\\" loading duly marked oncover with adequate steel reinforcement havingthickness 75 mm to 150 mm anti- corrosive bitumenpainted M.S. plate Rim and on M.S. lifting hooksadmixture like plasticizer bond improving compoundshrinkage resistance compound abrasion resistantcomplete as per approved design etc.or drain Opeining Size 1201 to 1500 mm StandardDrain Cover Size 2100mm x 500mm x 150mm |
| 21 | Construction of un-reinforced, plain cement concretepavement, thickness as per design, over a preparedsub base, with 43 grade cement or any other type asper Clause 602.2.2 M30 (Grade), coarse and fineaggregates conforming to IS:383, maximum size ofcoarse aggregate not exceeding 31.5 mm, mixed in aconcrete mixer of not less than 0.5 cum capacity andappropriate weigh batcher using approved mix design,laid in approved fixed Side Formwork (steel channel,laying and fixing of 150 micron thick polythene film,wedges, steel plates including levelling the formworkas per drawing), spreading the concrete with shovels,rakes, compacted using needle, screed and platevibrators and finished in continuous operation includingprovision of contraction and expansion, constructionjoints, applying debonding strips, primer, sealant nearapproaches to bridge/culvert and construction joints,admixtures as approved, curing of concrete slabs for14-days, using water finishing to lines and grade asper drawing and MoRTH Specification Clause 602including vaccum dewatering process with all requiredequipments (Dowel Bars will be paid seprately) |
| 22 | Marking Centre Line and stop lines etc. on road as perIRC pattern with thermoplastic paint of approvedquality and make without glass beads laid on the roadsurface at temperature 160\\" C with a special applicatormachine complete with a special applicator machinecomplete with labour material and traffic diversionarrangements. |
| 23 | Painting Two Coats on New Concrete Surfaces Painting two coats including primer coat after filling thesurface with synthetic enamel paint in all shades onnew, plastered / concrete surfaces as per drawing andMoRTH Specification Clause 801 |
| 24 | Traffic SignsSemi Reflective Traffic SignsProviding and fixing of semi reflective cautionary,mandatory and informatory sign board as per IRC:67made of 1.5 mm thick MS Sheet duly stove whitecolour in front and gray colour on back with redreflective border of 65 mm width and required lettersand figures with reflective tape engineering grade ofrequired shade and colour supported and welded on47mm x 47 mm x 12 SWG sheet tube firmly fixed tothe ground by mean of properly designed foundationswith M-15 grade cement concrete 450x450x600 mm,600 mm below ground level as per approved drawingand Specifications.900 mm equilateral triangle |
| 25 | Traffic SignsSemi Reflective Traffic SignsProviding and fixing of semi reflective cautionary,mandatory and informatory sign board as per IRC:67made of 1.5 mm thick MS Sheet duly stove whitecolour in front and gray colour on back with redreflective border of 65 mm width and required lettersand figures with reflective tape engineering grade ofrequired shade and colour supported and welded on47mm x 47 mm x 12 SWG sheet tube firmly fixed tothe ground by mean of properly designed foundationswith M-15 grade cement concrete 450x450x600 mm,600 mm below ground level as per approved drawingand Specifications.600 mm equilateral triangle |
| 26 | Traffic SignsSemi Reflective Traffic SignsProviding and fixing of semi reflective cautionary,mandatory and informatory sign board as per IRC:67made of 1.5 mm thick MS Sheet duly stove whitecolour in front and gray colour on back with redreflective border of 65 mm width and required lettersand figures with reflective tape engineering grade ofrequired shade and colour supported and welded on47mm x 47 mm x 12 SWG sheet tube firmly fixed tothe ground by mean of properly designed foundationswith M-15 grade cement concrete 450x450x600 mm,600 mm below ground level as per approved drawingand Specifications.600 mm circular |
| 27 | Traffic SignsSemi Reflective Traffic SignsProviding and fixing of semi reflective cautionary,mandatory and informatory sign board as per IRC:67made of 1.5 mm thick MS Sheet duly stove whitecolour in front and gray colour on back with redreflective border of 65 mm width and required lettersand figures with reflective tape engineering grade ofrequired shade and colour supported and welded on47mm x 47 mm x 12 SWG sheet tube firmly fixed tothe ground by mean of properly designed foundationswith M-15 grade cement concrete 450x450x600 mm,600 mm below ground level as per approved drawingand Specifications.800 mm x 600 mm rectangular |
| 28 | Direction and Place Identification signs upto 0.9 sqmsize boardRetro-reflectorised Traffic SignsProviding and erecting direction and placeidentification retro-reflectorised sign as per IRC:67made of encapsulated lens type reflective sheetingvide Clause 801.3.1, fixed over aluminium sheeting, 2mm thick with area not exceeding 0.9 sqm supportedon RCC Post 100 mm x 100 mm firmly fixed to theground by means of properly designed foundation withM-15 grade cement concrete 450 x 450 x 600 mm, 600mm below ground level as per approved drawing andMoRTH Specification Clause 801,upto 0.9 sqm sizeboard |
| 29 | Direction and Place Identification signs with size morethan 0.9 sqm size boardSemi-Reflective Traffic signsDirection and place identification signs more than 0.90sqm sign boardProviding and erecting direction and placeidentification of semi reflective sign boards as per IRC-67 made of 2 mm thick M.S. Sheet duly stoveenameled paint white colour in front and grey colour onback with reflective border of 70 mm width andrequired message, letters, figures with reflective tapeof engineering grade of required shade and colour.Supported and welded on two nos. 47 mm x 47 mm of12 SWG square tube of 3050 mm height dulystrengthened by 25 mm x 5 mm MS flat iron on edgeson back firmly fixed to the ground by means of properlydesigned foundations with M-15 grade cementconcrete 450 mm x 450 mm x 600 mm, 600 mm belowground level as per approved drawing andSpecification with size more than 0.9 sqm size board Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender