Bids Are invited for Facility Management Services - Lumpsum Based - Industrial; Construction Of Boundary Wall Wash Room At Internal Dosimetry Laboratory Building, Oscom Housing Colony; Consumables To Be Provided By Service Provider (Inclusive In Cont
Tender Overview
Project Description
Bids Are invited for Facility Management Services - Lumpsum Based - Industrial; Construction Of Boundary Wall Wash Room At Internal Dosimetry Laboratory Building, Oscom Housing Colony; Consumables To Be Provided By Service Provider (Inclusive In Contract Cost) - Earth Work In Excavation By (Hydraulic Excavator)/Manual Means In Foundation Trenches Or Drains Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5M,Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within The Site Lead Up To 50 Mtr. All Kinds Of Soil , Filling In Plinth, Under Floors With River Sand Including Watering, Ramming, Consolidating And Dressing Etc. Complete As Directed By Engineer-In-Charge(Only Consolidated Volume Of Sand Filling Will Be Paid) , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level.1:4:8 (1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size) , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level.1:2:4 (1 Cement : 2Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size) , Providing And Laying In Position Hand/Machine Mixed And Machine Vibrated Cement Concrete Of M-20 Grade Reinforced Cement Concrete , Excluding The Cost Of Centering, Shuttering And Reinforcement As Per Direction Of Engineer-In-Charge For All Work Up To Plinth Level. , Providing And Laying In Position Hand/Machine Mixed And Machine Vibrated Cement Concrete Of M-20 Grade For Reinforced Cement Concrete , Excluding The Cost Of Centering, Shuttering And Reinforcement As Per Direction Of Engineer-In-Charge For All Work Above Pl , Reinforcement For Rcc Work Including Supplying, Straightening, Cutting, Bending, Placing In Position And Binding With 22Gauge Ms Binding Wire Complete Including Cost, Conveyance, Lead, Lift Of All Materials For All Types Of Rcc Works As Per Drawing/Specification And As Directed By Engineer-In-Charge At All Levels. , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Up To Floor V Level :Foundations, Footings, Bases Of Columns Etc. For Mass Concrete , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Up To Floor V Level :Suspended Floors, Roofs, Landings, Balconies And Access Platform , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Up To Floor V Level :Columns, Pillars, Piers, Abutments, Posts And Struts. , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Up To Floor V Level :Edges Of Slab And Breaks In Floors And Walls Under 20 Cms Wide , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Up To Floor V Level :Weather Shade, Chajjas, Corbels Etc., Including Edges , Brick Work With Bricks Of Minimum Crushing Strength 60 Kg/Cm2 In Foundation And Plinth In Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) , Brick Work With Bricks Of Minimum Crushing Strength 60 Kg/Cm2 In Superstructure Above Plinth Level Upto Floor V Level In Cement Mortar 1:6 (1 Cement : 6 Coarse Sand). , 15 Mm Cement Plaster On Rough Side Of Single Or Half Brick Wall With A Floating Coat Of Neat Cement Of Mix 1:4(1 Cement:4 Sand) Including Cost And Conveyance Of All Materials, Labour, Scaffolding Etc. Complete As Directed By Engineer-In-Charge At All Levels , Distempering With 1St Quality Acrylic Distemper (Ready Mixed) Of Approved Manufacturer, Of Required Shade And Colour Complete To Achieve Even Shade And Colour As Per Manufacturers Specification:Two Or More Coats Over And Including Water Thinnable Priming Coat With Cement Primer Having Voc Content Less Than 50 Gram/Litre. Including Cost And Conveyance Of All Materials, Labour, Scaffolding Etc. Complete As Directed By Eic At All Levels. , Finishing Walls With Premium Acrylic Smooth Exterior Paint With Silicon Additives Of Required Shade: Two Or More Coats Applied @ 1.43 Ltr/10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg/10 Sqm) , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade : Two Or More Coats , Providing And Fixing Powder Coated Aluminium Work For Windows & Ventilators With Extruded Built Up Standard Tubular Sections/Appropriate Z Sections & Other Sections Of Approved Make Confirming To Is:733 & Is:1285 Fixed With Rawl Plugs & Screws Or With Fixing Clips Including Necessary Filling Up Of Gaps At Junctions, At Top, Bottom & Sides With Required Pvc/Neoprene Felt Etc. Aluminium Sections Shall Be Smooth,Rust Free, Straight, Mitred & Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing/Panelling,Cp Brass/Stainless Steel Screws All Complete As Per Architectural Drawings & Directions Of Engg.- In- Charge(Glazing & Panelling To Be Paid Separately).Minimum Thickness Of Powder Coating For Powder Coated Aluminium Shall Be 50 Micron : For Fixed Portion , For Shutter Of Windows & Ventilators Including Providing And Fixing Hinges/Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Pvc Neoprene Gasket Required(Fittings Shall Be Paid For Separately) , Providing And Fixing Glazing In Aluminium Windows, Ventilator Shutters, Partitions Etc. With Pvc/ Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Direction Of Engineer-In-Charge With Float Glass Panes Of 4Mm Thickness , Supplying, Providing And Fixing Frp Door Frames Of Cross Section 90Mmx45 Mm Having Single Rebate Of Suitable Size To Receive Shutter Of 30Mm/25Mm Thickness. The Laminate Shall Be Moulded With Fire Resistance Grade Unsaturated Polyster Resin And Chopped Mat. Door Frame Laminate Shall Be 2 Mm Thick And Shall Be Filled With Suitable Wooden Block In All The Three Legs. The Frame Shall Be Covered With Fibre Glass From All Sides. Ms Stay Shall Be Provided At The Bottom To Steady The Frame Etc. Complete As Per Direction Of Eic , Supplying, Providing And Fixing Of Frp 30Mm Thick Door (+/-2Mm Tolerance) Paneled Door Shutter Made Out Of Fire Retardant Grade Unsaturated Polyster Resin, Moulded To 3Mm Thick Frp Laminate For Forming Hollow Rails And Styles, With Wooden Frame And Suitable Blocks Of Seasoned Wood Inside At Required Places For Fixing Of Fittings, Cast Monolithically With 5Mm Thick Frp Laminate For Panels. The Door To Be Finished With Two Coats Of Approved Enamel Paint. The Door To Be Fixed With Frame With 6 Nos Of 4 Inch Hinges With Help Of 1.25 Inch Full Thread Csk Screw, Including All Steel Fittings Like Door Handle, Tower Bolts, Aldrops, Etc. Complete As Per Direction Of Eic , Providing And Fixing M.S. Grills Of Required Pattern In Frames Of Windows Etc. With M.S. Flats, Square Or Round Bars Etc. Including Priming Coat With Approved Steel Primer All Complete. Fixed To Openings /Wooden Frames With Rawl Plugs Screws Etc. , Providing & Fixing Cpvc Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings I/C Fixing The Pipe With Cl S At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Eic (20 Mm Dia Nominal Bore) , Providing & Fixing Cpvc Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings I/C Fixing The Pipe With Cl S At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Eic (25 Mm Dia Nominal Bore) , Supplying All Material, Labour And Fixing And Fitting Of The Pvc (Swr) Pipe Confirming To Is: 13592 Both Below And Above Ground Level Including Jointing With Adhesive Of All Complete. This Should Also Include Necessary Earth Work In Excavation And Filling And Fixing With Wall As Directed By E.I.C. (110Mm Dia) , Supplying All Material Labour And Fixing And Fitting Of The Following Pvc (Swr) And Rigid Pvc Fitting Confirming To Is: 14735 In The Pipe Line Both Below And Above Ground Level Including Jointing With Adhesive For Rigid Pvc Fittings As Per Specification Of All Complete. This Should Also Include Necessary Earth Work In Excavation And Filling: (110Mm Dia Pvc (Swr) Single Tee With Door) , Supplying All Material Labour And Fixing And Fitting Of The Following Pvc (Swr) And Rigid Pvc Fitting Confirming To Is: 14735 In The Pipe Line Both Below And Above Ground Level Including Jointing With Adhesive For Rigid Pvc Fittings As Per Specification Of All Complete. This Should Also Include Necessary Earth Work In Excavation And Filling: (110Mm Dia Pvc (Swr) Vent Cowl) , Supplying All Material Labour And Fixing And Fitting Of The Following Pvc (Swr) And Rigid Pvc Fitting Confirming To Is: 14735 In The Pipe Line Both Below And Above Ground Level Including Jointing With Adhesive For Rigid Pvc Fittings As Per Specification Of All Complete. This Should Also Include Necessary Earth Work In Excavation And Filling: (110Mm Dia Pvc (Swr) Plain Bend 87.5 Degree With Door) , Supplying All Material Labour And Fixing And Fitting Of The Following Pvc (Swr) And Rigid Pvc Fitting Confirming To Is: 14735 In The Pipe Line Both Below And Above Ground Level Including Jointing With Adhesive For Rigid Pvc Fittings As Per Specification Of All Complete. This Should Also Include Necessary Earth Work In Excavation And Filling: (110Mm Dia Single Plain Tee) , Supplying All Material Labour And Fixing And Fitting Of The Following Pvc (Swr) And Rigid Pvc Fitting Confirming To Is: 14735 In The Pipe Line Both Below And Above Ground Level Including Jointing With Adhesive For Rigid Pvc Fittings As Per Specification Of All Complete. This Should Also Include Necessary Earth Work In Excavation And Filling: 110Mm Dia Pvc (Swr) Plain Bend , Providing And Fixing Wash Basin With C.I. Brackets, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require: White Vitreous China Wash Basin Size 630X450 Mm , Providing And Fixing 15 Mm C.P Brass Pillar Taps With Weight Not Less Than1000 Gm.Csting: 100% Virgin Brass Ingots Certified For 63% Copper , Chrome Plating. Robotic Electroplating With Lustrous Shine, Spindle Size- Bsp 1/2 , Providing And Fixing 15 Mm C.P Brass Bib Cock With Wall Flange Of Approved Quality Weight Not Less Than 690 Gm.Casting: 100% Virgin Brass Ingots Certified For 63% Copper , Chrome Plating. Robotic Electroplating With Lustrous Shine Dimensions : 18.5 X 16 X 5.7 Cm , Spindle Size- Bsp 1/2 , Providing And Fixing C.P Brass Concealed Stop Cock , 15 Mm Nominal Bore Weight Not Less Than 500 Gm , Providing And Fixing C.P Brass Angular Stop Cock With Wall Flange Of Approved Quality ,15 Mm Nominal Bore Weight Not Less Than 330 Gm,Casting: 100% Virgin Brass Ingots Certified For 63% Copper , Chrome Plating. Robotic Electroplating With Lustrous Shine Spindle : M28 X 1.5 P. , Providing And Fixing C.P Brass Shower Rose With 15 Mm Inlet : 150 Mm Diameter , Providing And Fixing C.P Brass Extension Nipple Of All Size As Directed By Eic. , Providing And Fixing 600X450 Mm Beveled Edge Mirror Of Superior Glass (Of Approved Quality) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete , Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is: 15622 Or Iso 13006 (Thickness To Be Specified By The Manufacturer But Not Less Than 8Mm) In All Colours, Shades Of Kajaria, Johnson & Johnson,Nitco,Somany Make Of Size 300X300 Mm Or More, In Walls,Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. , Providing And Laying Anti Skid Ceramic Floor Tiles Of Size 300X300 Mm Or More (Thickness To Be Specified By The Manufacturer But Not Less Than 8Mm), Of 1St Quality Conforming To Is : 15622 Or Iso 13006 Of Kajaria, Johnson & Johnson,Nitco,Somany Make Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement: 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete.
BOQ
| Sl. No. | Item Title | Item Description |
| 1 | Earth work in excavation by (Hydraulic excavator)/manual means in foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto 1.5m,including getting out the excavated soil and disposal of surplus excavated soil as directed, within the site lead up to 50 Mtr. All kinds of soil | Earth work in excavation by (Hydraulic excavator)/manual means in foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto 1.5m,including getting out the excavated soil and disposal of surplus excavated soil as directed, within the site lead up to 50 Mtr. All kinds of soil |
| 2 | Filling in plinth, under floors with River sand including watering, ramming, consolidating and dressing etc. complete as directed by Engineer-in-charge(only consolidated volume of sand filling will be paid) | Filling in plinth, under floors with River sand including watering, ramming, consolidating and dressing etc. complete as directed by Engineer-in-charge(only consolidated volume of sand filling will be paid) |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level.1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level.1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level.1:2:4 (1 Cement : 2coarse sand : 4 graded stone aggregate 20mm nominal size) | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level.1:2:4 (1 Cement : 2coarse sand : 4 graded stone aggregate 20mm nominal size) |
| 5 | Providing and laying in position hand/machine mixed and machine vibrated cement concrete of M-20 grade reinforced cement concrete , excluding the cost of centering, shuttering and reinforcement as per direction of Engineer-in-charge for all work up to Plinth level. | Providing and laying in position hand/machine mixed and machine vibrated cement concrete of M-20 grade reinforced cement concrete , excluding the cost of centering, shuttering and reinforcement as per direction of Engineer-in-charge for all work up to Plinth level. |
| 6 | Providing and laying in position hand/machine mixed and machine vibrated cement concrete of M-20 grade for reinforced cement concrete , excluding the cost of centering, shuttering and reinforcement as per direction of Engineer-in-charge for all work above PL | Providing and laying in position hand/machine mixed and machine vibrated cement concrete of M-20 grade for reinforced cement concrete , excluding the cost of centering, shuttering and reinforcement as per direction of Engineer-in-charge for all work above PL |
| 7 | Reinforcement for RCC work including supplying, straightening, cutting, bending, placing in position and binding with 22Gauge MS binding wire complete including cost, conveyance, lead, lift of all materials for all types of RCC works as per drawing/specification and as directed by Engineer-in-charge at all levels. | Reinforcement for RCC work including supplying, straightening, cutting, bending, placing in position and binding with 22Gauge MS binding wire complete including cost, conveyance, lead, lift of all materials for all types of RCC works as per drawing/specification and as directed by Engineer-in-charge at all levels. |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for up to floor V level :Foundations, footings, bases of columns etc. for mass concrete | Centering and shuttering including strutting, propping etc. and removal of form for up to floor V level :Foundations, footings, bases of columns etc. for mass concrete |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for up to floor V level :Suspended floors, roofs, landings, balconies and access platform | Centering and shuttering including strutting, propping etc. and removal of form for up to floor V level :Suspended floors, roofs, landings, balconies and access platform |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for up to floor V level :Columns, Pillars, Piers, Abutments, Posts and Struts. | Centering and shuttering including strutting, propping etc. and removal of form for up to floor V level :Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for up to floor V level :Edges of slab and breaks in floors and walls under 20 cms wide | Centering and shuttering including strutting, propping etc. and removal of form for up to floor V level :Edges of slab and breaks in floors and walls under 20 cms wide |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form for up to floor V level :Weather shade, Chajjas, corbels etc., including edges | Centering and shuttering including strutting, propping etc. and removal of form for up to floor V level :Weather shade, Chajjas, corbels etc., including edges |
| 13 | Brick work with bricks of minimum crushing strength 60 kg/cm2 in foundation and plinth in cement mortar 1:6 (1 Cement : 6 coarse sand) | Brick work with bricks of minimum crushing strength 60 kg/cm2 in foundation and plinth in cement mortar 1:6 (1 Cement : 6 coarse sand) |
| 14 | Brick work with bricks of minimum crushing strength 60 kg/cm2 in superstructure above plinth level upto floor 'V' level in cement mortar 1:6 (1 Cement : 6 coarse sand). | Brick work with bricks of minimum crushing strength 60 kg/cm2 in superstructure above plinth level upto floor 'V' level in cement mortar 1:6 (1 Cement : 6 coarse sand). |
| 15 | 15 mm cement plaster on rough side of single or half brick wall with a floating coat of neat cement of mix 1:4(1 cement:4 sand) including cost and conveyance of all materials, labour, scaffolding etc. complete as directed by Engineer-in-Charge at all levels | 15 mm cement plaster on rough side of single or half brick wall with a floating coat of neat cement of mix 1:4(1 cement:4 sand) including cost and conveyance of all materials, labour, scaffolding etc. complete as directed by Engineer-in-Charge at all levels |
| 16 | Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete to achieve even shade and colour as per manufacturer's specification:Two or more coats over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre. Including cost and conveyance of all materials, labour, scaffolding etc. complete as directed by EIC at all levels. | Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete to achieve even shade and colour as per manufacturer's specification:Two or more coats over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre. Including cost and conveyance of all materials, labour, scaffolding etc. complete as directed by EIC at all levels. |
| 17 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicon additives of required shade: Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | Finishing walls with Premium Acrylic Smooth exterior paint with Silicon additives of required shade: Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 18 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats |
| 19 | Providing and fixing powder coated aluminium work for windows & ventilators with extruded built up standard tubular sections/appropriate Z sections & other sections of approved make confirming to IS:733 & IS:1285 fixed with rawl plugs & screws or with fixing clips including necessary filling up of gaps at junctions, at top, bottom & sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth,rust free, straight, mitred & jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/panelling,CP brass/stainless steel screws all complete as per architectural drawings & directions of Engg.- in- charge(glazing & panelling to be paid separately).Minimum thickness of powder coating for powder coated Aluminium shall be 50 micron : For fixed portion | Providing and fixing powder coated aluminium work for windows & ventilators with extruded built up standard tubular sections/appropriate Z sections & other sections of approved make confirming to IS:733 & IS:1285 fixed with rawl plugs & screws or with fixing clips including necessary filling up of gaps at junctions, at top, bottom & sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth,rust free, straight, mitred & jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/panelling,CP brass/stainless steel screws all complete as per architectural drawings & directions of Engg.- in- charge(glazing & panelling to be paid separately).Minimum thickness of powder coating for powder coated Aluminium shall be 50 micron : For fixed portion |
| 20 | For shutter of windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of PVC neoprene gasket required(fittings shall be paid for separately) | For shutter of windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of PVC neoprene gasket required(fittings shall be paid for separately) |
| 21 | Providing and fixing glazing in aluminium windows, ventilator shutters, partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the direction of Engineer-in-charge with float glass panes of 4mm thickness | Providing and fixing glazing in aluminium windows, ventilator shutters, partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the direction of Engineer-in-charge with float glass panes of 4mm thickness |
| 22 | Supplying, providing and fixing FRP Door frames of cross section 90mmX45 mm having single rebate of suitable size to receive shutter of 30mm/25mm thickness. The laminate shall be moulded with fire resistance grade unsaturated polyster resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fibre glass from all sides. MS stay shall be provided at the bottom to steady the frame etc. complete as per direction of EIC | Supplying, providing and fixing FRP Door frames of cross section 90mmX45 mm having single rebate of suitable size to receive shutter of 30mm/25mm thickness. The laminate shall be moulded with fire resistance grade unsaturated polyster resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fibre glass from all sides. MS stay shall be provided at the bottom to steady the frame etc. complete as per direction of EIC |
| 23 | Supplying, providing and fixing of FRP 30mm thick door (+/-2mm tolerance) paneled door shutter made out of fire retardant grade unsaturated polyster resin, moulded to 3mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels. The door to be finished with two coats of approved enamel paint. The door to be fixed with frame with 6 nos of 4 inch hinges with help of 1.25 inch full thread CSK screw, including all steel fittings like door handle, tower bolts, aldrops, etc. complete as per direction of EIC | Supplying, providing and fixing of FRP 30mm thick door (+/-2mm tolerance) paneled door shutter made out of fire retardant grade unsaturated polyster resin, moulded to 3mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels. The door to be finished with two coats of approved enamel paint. The door to be fixed with frame with 6 nos of 4 inch hinges with help of 1.25 inch full thread CSK screw, including all steel fittings like door handle, tower bolts, aldrops, etc. complete as per direction of EIC |
| 24 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. |
| 25 | Providing & fixing CPVC pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of EIc (20 mm dia nominal bore) | Providing & fixing CPVC pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of EIc (20 mm dia nominal bore) |
| 26 | Providing & fixing CPVC pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of EIc (25 mm dia nominal bore) | Providing & fixing CPVC pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of EIc (25 mm dia nominal bore) |
| 27 | Supplying all material, labour and fixing and fitting of the PVC (SWR) pipe confirming to IS: 13592 both below and above ground level including jointing with adhesive of all complete. This should also include necessary earth work in excavation and filling and fixing with wall as directed by E.I.C. (110mm dia) | Supplying all material, labour and fixing and fitting of the PVC (SWR) pipe confirming to IS: 13592 both below and above ground level including jointing with adhesive of all complete. This should also include necessary earth work in excavation and filling and fixing with wall as directed by E.I.C. (110mm dia) |
| 28 | Supplying all material labour and fixing and fitting of the following PVC (SWR) and rigid PVC fitting confirming to IS: 14735 in the pipe line both below and above ground level including jointing with adhesive for rigid PVC fittings as per specification of all complete. This should also include necessary earth work in excavation and filling: (110mm dia PVC (SWR) single Tee with door) | Supplying all material labour and fixing and fitting of the following PVC (SWR) and rigid PVC fitting confirming to IS: 14735 in the pipe line both below and above ground level including jointing with adhesive for rigid PVC fittings as per specification of all complete. This should also include necessary earth work in excavation and filling: (110mm dia PVC (SWR) single Tee with door) |
| 29 | Supplying all material labour and fixing and fitting of the following PVC (SWR) and rigid PVC fitting confirming to IS: 14735 in the pipe line both below and above ground level including jointing with adhesive for rigid PVC fittings as per specification of all complete. This should also include necessary earth work in excavation and filling: (110mm dia PVC (SWR) vent cowl) | Supplying all material labour and fixing and fitting of the following PVC (SWR) and rigid PVC fitting confirming to IS: 14735 in the pipe line both below and above ground level including jointing with adhesive for rigid PVC fittings as per specification of all complete. This should also include necessary earth work in excavation and filling: (110mm dia PVC (SWR) vent cowl) |
| 30 | Supplying all material labour and fixing and fitting of the following PVC (SWR) and rigid PVC fitting confirming to IS: 14735 in the pipe line both below and above ground level including jointing with adhesive for rigid PVC fittings as per specification of all complete. This should also include necessary earth work in excavation and filling: (110mm dia PVC (SWR) plain bend 87.5 degree with door) | Supplying all material labour and fixing and fitting of the following PVC (SWR) and rigid PVC fitting confirming to IS: 14735 in the pipe line both below and above ground level including jointing with adhesive for rigid PVC fittings as per specification of all complete. This should also include necessary earth work in excavation and filling: (110mm dia PVC (SWR) plain bend 87.5 degree with door) |
| 31 | Supplying all material labour and fixing and fitting of the following PVC (SWR) and rigid PVC fitting confirming to IS: 14735 in the pipe line both below and above ground level including jointing with adhesive for rigid PVC fittings as per specification of all complete. This should also include necessary earth work in excavation and filling: (110mm dia single plain Tee) | Supplying all material labour and fixing and fitting of the following PVC (SWR) and rigid PVC fitting confirming to IS: 14735 in the pipe line both below and above ground level including jointing with adhesive for rigid PVC fittings as per specification of all complete. This should also include necessary earth work in excavation and filling: (110mm dia single plain Tee) |
| 32 | Supplying all material labour and fixing and fitting of the following PVC (SWR) and rigid PVC fitting confirming to IS: 14735 in the pipe line both below and above ground level including jointing with adhesive for rigid PVC fittings as per specification of all complete. This should also include necessary earth work in excavation and filling: 110mm dia PVC (SWR) plain bend | Supplying all material labour and fixing and fitting of the following PVC (SWR) and rigid PVC fitting confirming to IS: 14735 in the pipe line both below and above ground level including jointing with adhesive for rigid PVC fittings as per specification of all complete. This should also include necessary earth work in excavation and filling: 110mm dia PVC (SWR) plain bend |
| 33 | Providing and fixing wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm | Providing and fixing wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm |
| 34 | Providing and fixing 15 mm C.P brass pillar taps with weight not less than1000 gm.Csting: 100% virgin Brass ingots certified for 63% copper , chrome plating. Robotic Electroplating with lustrous shine, Spindle size- BSP 1/2'' | Providing and fixing 15 mm C.P brass pillar taps with weight not less than1000 gm.Csting: 100% virgin Brass ingots certified for 63% copper , chrome plating. Robotic Electroplating with lustrous shine, Spindle size- BSP 1/2'' |
| 35 | Providing and fixing 15 mm C.P brass bib cock with wall flange of approved quality weight not less than 690 gm.Casting: 100% virgin Brass ingots certified for 63% copper , chrome plating. Robotic Electroplating with lustrous shine dimensions : 18.5 x 16 x 5.7 cm , Spindle size- BSP 1/2'' | Providing and fixing 15 mm C.P brass bib cock with wall flange of approved quality weight not less than 690 gm.Casting: 100% virgin Brass ingots certified for 63% copper , chrome plating. Robotic Electroplating with lustrous shine dimensions : 18.5 x 16 x 5.7 cm , Spindle size- BSP 1/2'' |
| 36 | Providing and fixing C.P brass concealed stop cock , 15 mm nominal bore weight not less than 500 gm | Providing and fixing C.P brass concealed stop cock , 15 mm nominal bore weight not less than 500 gm |
| 37 | Providing and fixing C.P brass Angular stop cock with wall flange of approved quality ,15 mm nominal bore weight not less than 330 gm,Casting: 100% virgin Brass ingots certified for 63% copper , chrome plating. Robotic Electroplating with lustrous shine spindle : M28 X 1.5 P. | Providing and fixing C.P brass Angular stop cock with wall flange of approved quality ,15 mm nominal bore weight not less than 330 gm,Casting: 100% virgin Brass ingots certified for 63% copper , chrome plating. Robotic Electroplating with lustrous shine spindle : M28 X 1.5 P. |
| 38 | Providing and fixing C.P brass shower rose with 15 mm inlet : 150 mm diameter | Providing and fixing C.P brass shower rose with 15 mm inlet : 150 mm diameter |
| 39 | Providing and fixing C.P brass extension nipple of all size as directed by EIC. | Providing and fixing C.P brass extension nipple of all size as directed by EIC. |
| 40 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete |
| 41 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 or ISO 13006 (thickness to be specified by the manufacturer but not less than 8mm) in all colours, shades of Kajaria, Johnson & Johnson,nitco,somany make of size 300x300 mm or more, in walls,skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 or ISO 13006 (thickness to be specified by the manufacturer but not less than 8mm) in all colours, shades of Kajaria, Johnson & Johnson,nitco,somany make of size 300x300 mm or more, in walls,skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 42 | Providing and laying anti skid Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer but not less than 8mm), of 1st quality conforming to IS : 15622 or ISO 13006 of Kajaria, Johnson & Johnson,nitco,somany make laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. | Providing and laying anti skid Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer but not less than 8mm), of 1st quality conforming to IS : 15622 or ISO 13006 of Kajaria, Johnson & Johnson,nitco,somany make laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender