Tender For Special Repair To E/M Installations Bldgs At Military Station Baroda Under Ge (A) Baroda.
Tender Value
37.47 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
10 days left
EMD
74940
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Vadodara → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To E/M Installations Bldgs At Military Station Baroda Under Ge (A) Baroda.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling posts or struts any type and any section including taking out embedded portion in concrete, brick work, masonary etc, and making good disturbed ground complete all as specified. |
| 2 | Excavating in post holes in soft & loose soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,complete all as specified or directed. |
| 3 | S&F Mild steel angle or other section as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified or directed by the EIC |
| 4 | M&L for cement concrete type C-2 1:3:6 using 40mm graded stone aggregate as in foundations filling and mass concrete complete all as specified. |
| 5 | Dismantling fencing wire mesh any type complete all as specified and directed. |
| 6 | Supply only MS galvanised chain link fencing , any size or type |
| 7 | Fixing only chainlink fencing including line wires, any mesh any type to standrard rails, straining bolts etc, including provn of binding wire etc complete all as specified |
| 8 | Supply only mild steel round bar of grade Fe-290(Gde E-165) complete all as specified and directed . |
| 9 | S & F in repair galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts including securing or tying at crossings with and provn of galvanised mild steel wire complete all as specified or directed. |
| 10 | Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) and disposing off the rubbish materials where directed complete all as specified or directed by the EIC |
| 11 | M&L for cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate 75mm thick as in sub base to flooring including necessary form work complete all as specified. |
| 12 | M&L for cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate 75mm thick as in hard standing including necessary form work and finishing surface even and smooth without using extra cement complete all as specified. |
| 13 | Demolition of Stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc where directed complete all as specified or directed by the EIC |
| 14 | M&L Machine pressed precast concrete interlocking paver block any size and shape conforming to IS 15658-2006 of 60mm thickness, M-35Grade with grey cement and pigment including sypplying ,spreading and levelling sand cushioning 25 mm thick complete all as specified or directed. |
| 15 | S & F chequered,glossy finised coloured cement concrete tiles 300x300x25mm size set jointed and pointed in neat cement slurry with grey cement and no pigment as in floors, including 15mm thick screed bed of cement mortar 1:6 complete all as specified and as directed |
| 16 | M&L for PCC 1:2:4 type B-1 using 20mm graded aggregate in coping,kneelars,apex stones,bed plates,kerb etc water troughs and the like including weathering, slightly rounded for chamfered angles and troathing including necessary form work complete all as specified and as directed. |
| 17 | Demolition of brick work or stone masonary built in cement mortar including quions, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and disposing off the rubbish materials where directed a complete all as specified |
| 18 | M&L for brick work with sub class `B' bricks,(old size bricks) straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified. |
| 19 | M&L for brick work with sub class `B' bricks,(old size bricks)Except brick only straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified. |
| 20 | M&L for cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate 75mm thick as in sub base to flooring including necessary form work complete all as specified. |
| 21 | Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish complete all as specified or directed by the EIC. |
| 22 | M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified. |
| 23 | Extra for forming fair finished drain or channel 30 cm to 60cm inner grith in cement concrete, using extra cement forms, moulds, mitred/stopped ends etc complete all as specified and directed. |
| 24 | M&L for PCC 1:2:4 type B-2 using 40mm graded stone aggregate as in surface channels/drains, and benching including finishing top of benching even and smooth using extra cement complete all as specified and directed. |
| 25 | Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings |
| 26 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified. |
| 27 | Dismantling structural steel work including doors, gates but excluding framed truss etc |
| 28 | S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe-290 (Gde E 165) |
| 29 | Welding in repair nexc 2.5cm in length , thickness of metal to be welded exc 6mm but nexc 9mm complete all as specified and directed. |
| 30 | Welding in repair exc 2.5cm but nexc 5cm in length thickness of metal to be welded exc 6mm but nexc 9mm complete all as specified and directed. |
| 31 | Demolition of stone slabs and tiles of any description or thickness in floors & wall, laid bedded & pointed in any mortar. |
| 32 | M&L for non skid coloured ceramic tile 7 to 8mm thick area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match including 15mm thick screed bed or bedding layer of mortar for laying floor finishes with CM 1:6 complete all as specified & directed by Engineer-in-Charge. |
| 33 | M&L for Glazed ceramic coloured walls tiles in vertical surfaces 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering for backing coat on vertical surface of wall or concrete surfaces in CM 1:4 to receive wall tiles complete all as specified & directed by Engineer-in-Charge. |
| 34 | M&L for Machine cut kota stone slab for Platform top and sides 20-25mm thick over cement 15mm thick backing coat laid and jointed with CM 1:4 grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete complete all as specified & directed by Engineer-in-Charge. |
| 35 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land all as directed by Engr-in-Charge. |
| 36 | S & F 16mm bore high density CPVC CPVC pipes SDR 11 & PlainCPVC SDR 11 fittings on walls/ceiling or laying in floors complete all asspecifie all as directed. |
| 37 | Taking up or down 25mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land all as directed by Engr-in-Charge. |
| 38 | S & F 25mm bore high density UPVC pipe of pressure rating 6kgf/sqcm with all fittings and fixed complete to walls and ceilings or laid in floors all as directed. |
| 39 | Taking up or down 50mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land all as directed by Engr-in-Charge. |
| 40 | S & F 50mm bore high density UPVC pipe of pressure rating 6kgf/sqcm with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified & directed by Engineer-in-Charge. |
| 41 | M&L in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement concrete type B1, 1:2:4 for 75mm bore complete all as specified & directed by Engineer-in-Charge. |
| 42 | S&F in repair beveled edge mirror 5 mm thick of selected quality glass mounted on fancy decorated frame and fixed to wooden plugs with chromium plated brass screws and cup washers with aluminium beading complete all as specified and directed. |
| 43 | S & F in repairs 530x380x400 mm Vitreous China wash down water closet pan pedestal pattern (Europian type) (excluding flushing cistern and flush pipe) plastic seat same colour of seat, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 44 | S & F in repairs PVC valvless syphonic action flushing cistern low level white of 10ltrs capacity with inlet ball valve float and handle including bracket complete all as specified & directed by Engineer-in-Charge. |
| 45 | S&F in repairs health faucet mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified & directed by Engineer-in-Charge..(Make: hindware,Jaquar,Cera) |
| 46 | S&F in repairs PVC connection 600mm long of dia 15mm complete all as specified & directed by Engineer-in-Charge.. |
| 47 | S&F in repair Vitreous China counter sunk wash hand basin, round shape dia 600mm white excluding taps, waste chains and plugs and porcilain stopper but including CI bracket and nut bolts as per maufacturers instructions complete all as specified and directed.(Make: cera, jaquar) |
| 48 | S&F in repairs 32mm dia flexible waste pipe for urinal, wash basin and kitchen sink for length exc. 1m not exc 2m complete all as specified & directed by Engineer-in-Charge. |
| 49 | S&F in repairs 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall as in waste/soil pipe complete all as specified and directed |
| 50 | S&F in repairs 75 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall as in waste/soil pipe complete all as specified and directed |
| 51 | S&F in repairs 110 mm dia PVC (SWR) bends of any radius complete all as specified & directed by Engineer-in-Charge. |
| 52 | S&F in repairs 75 mm dia PVC (SWR) bends of any radius with duck foot or heel rest fitted with complete all as specified & directed by Engineer-in-Charge. |
| 53 | S&F in repairs including disconnecting tanks, 1000 ltrs rotational moulded Triple layred high quality insulation gives protection against tempreture variation with self locking lid with hexa bolts with anti algae , polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I.(Make: Sintex,vectus industries etc) |
| 54 | S&F in repairs 25mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 142 gms) complete all as specified and directed. Make : Prayag & equivalent. |
| 55 | S & F in repairs 530x380x400 mm Vitreous China wash down water closet pan pedestal pattern (Europian type) (excluding flushing cistern and flush pipe) plastic seat same colour of seat, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 56 | S&F in repairs 15mm dia stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle for iron pipe complete all as specified & directed by Engineer-in-Charge.(Make: Hindware,Jaquar,Cera) |
| 57 | S&F in repairs, 15mm bore bib taps fancy type chromium plated cast copper alloy with capstan heads, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.(Make: Hindware,Jaquar,Cera) |
| 58 | S&F in repairs chromium plated shower rose with or without swivel joints any size, including fixing to GI pipe for 125mm dia complete all as specified & directed.(Make: Hindware,Jaquar,Cera) |
| 59 | S&F in repairs fancy type Pillar taps, cast copper alloy, with capstan heads,chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed .(Make: Hindware,Jaquar,Cera) |
| 60 | S&F in repairs, towel rail 600mm Long with Lower Hangers, Stainless Steel complete all as specified and directed. (Make: Jaquar or equivalent) |
| 61 | Taking down cement plaster on brick or stone walls / ceiling, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified & directed by Engineer-in-Charge. |
| 62 | M & L for 10 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces and surface finished even and smooth without using extra cement complete all as specified & directed by Engineer-in-Charge. |
| 63 | M & L for rendering 5mm thick on brick wall surface or concrete surfaces of ceiling in cement mortar 1:3 for finished even and smooth (without using extra cement) complete all as specified & directed by Engineer-in-Charge. |
| 64 | M&L for Rendering in two layer on fair faces of brick work or concrete surfaces of wall 5 mm thick in CM 1:4 mixed with WPC @ 3% by wt of cement for finished even and smooth without using extra cement over 10 mm thick rendering in cement mortar 1:6 smooth without using extra cement (WPC will be measured separately) complete all as specified & directed by Engineer-in-Charge. |
| 65 | Supply only Integral water proofing compound complete all as specified & directed by Engineer-in-Charge. |
| 66 | M&L for preparing new plastered surfaces of ceiling and applying three coats of white wash on ceiling complete all as specified & directed by Engineer-in-Charge. |
| 67 | M&L for preparing new plastered surfaces of wall and applying three coats of white wash on wall complete all as specified & directed by Engineer-in-Charge. |
| 68 | M & L for preparing new plastered surfaces of wall and applying two coats of cement based paint over and one coat of chalk whitening primer complete |
| 69 | M & L for preparing old plastered surfaces of wall and applying one coat cement base paint on external wall. |
| 70 | M & L for preparing old plastered surfaces of wall and applying two coat white wash complete all as specified. |
| 71 | Taking down chowkats or frame with shutter (without taking off shutter from the frame) n.exc 1.5sqm each and making good disturbed portion to match with existing complete all as specified & directed by Engineer-in-Charge. |
| 72 | Taking down chowkats or frame with shutter (without taking off shutter from the frame) exc 1.5 but n.exc 4sqm each and making good disturbed portion to match with existing complete all as specified & directed by Engineer-in-Charge. |
| 73 | S & F solid PVC door frame of size 50mmx47mm made out of 5mm Prelam colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing. The door frame shall be tied to the wall using 75/100mm long MS screw as directed. |
| 74 | S & F Factory made solid panel Prelaminated PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. M S tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail, panelling of prelaminated colour PVC sheet both side to be fitted in the MS frame welded/sealed to the stile and rails with suitable PVC sheet beading and jointed together with solvent cement. |
| 75 | S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars,dovetailed or welded |
| 76 | S&F 150 mm extruded brass handles, fabricated type anodized complete all as specified and directed. |
| 77 | S&F 300mm brass sliding door bolts, with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast alluminium alloy complete all as specified and directed. |
| 78 | S & F 150 mm long brass barrel tower bolt of extruded section and fixed, complete all as specified & directed by Engineer-in-Charge. |
| 79 | S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised staples complete all as specified and directed. |
| 80 | M & L for 4.0mm thick figured glass, n.exc 0.5 Sqm and glazing with rubber beading or with glazing clips, complete all as specified & directed by Engineer-in-Charge. |
| 81 | M&L for 35mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, comercial type on both sides veneered both side with decorative choice laminate type 1 (factory laminated),including 6mm thick external teak wood lipping fixed with nails, color and pattern as approved by EIC/GE. |
| 82 | Dismantling cast iron work of any de scription complete all as specified and direted by Engr-in-charge. |
| 83 | S&F of Steel rolling shutters 1mm thickness of leth, with out ball bearing, as specified including top cover, an choring rod, hasp and staple and one shop coat of primer; erected in position as indi cated, complete but gear operated type with bevel gear box and crank handle |
| 84 | S&F in Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and direted by Engr-in-charge. |
| 85 | S&F in Ball bearing for rolling shutters complete all as specified and direted by Engr-in-charge. |
| 86 | Cleaning the surface with wire brush, detecting sources of leakages and removing/taking down unsound treatment/surface and M&L for carrying out non destructive, waterproofing treatment to sunken portion of slab, floor, chajjas and walls of bath, WC, WHB and floor traps (combined unit) by using construction chemical method as hydrophobic PU grouting, etc, with first course of injection MDI based PU foam and second course of injection PU plain all as per manufacturers instruction, etc, complete and as directed . The PU foam shall have 100% solids and solvent free and shall expand 30-40 times its volume at liquid stage in presence of water, the PU plain injection shall have minimum 100 CPS viscosity and shore hardness minimum 50. Make: PIDILITE (Dr Fixit) or equivalent. |
| 87 | Grubbing up tree trunk including cutting of trunk portion protruding over ground, digging out roots, filling holes, trunk around periphery of building upto 2m and leveling off ground periphery of building upto 2m, stacking of serviceable material and removing of unserviceable material to a distance n exc. 500 m and clearing site |
| 88 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for (roof padding/roof kerb/sunken floor etc.) complete all as specified & directed by Engineer-in-Charge. |
| 89 | M&L for cement concrete 1:2:4 type B-0 mix (12.5 mm graded stone aggregate) in padding over roof of any thickness complete all as specified & directed by Engineer-in-Charge. |
| 90 | M&L for 10 mm thick rendering in CM 1:3 over concrete surfaces (Roof) mixed with liquid water proofing compound @ 0.200 litre per bag of 50 kg of cement complete all as specified & directed by Engineer-in-Charge. NOTE:- Liquid water proofing compound shall be measured and paid for separately as “Supply only”. |
| 91 | M&L for applying roof treatment on top of roof with APP modified membrane (minimum 3 mm thick) weight not less than 3.00 Kg/sqm and reinforced with non-woven polyster reinforcement/mat (centre core) with thermal insulation with polythene finish on upper side of membrane, laid by torch application method with overlaps 150 mm on length side and 100 mm on the width side as per manufacturer’s instructions over and including a coat of bitumen S-35 (30/40) @ 1.20 kg/sqm over and including a coat of approved cold applied bituminous oil based primer (IS- 3384) @ 0.40 litre/sqm and providing two coat Aluminium Paint over all as per manufacturers instructions complete all as specified and as directed by Engineer-in-Charge. |
| 92 | Taking down carefully old U/S point wiring copper/Aluminum (light/ fan /sockets/power) complete with switches, sockets, fan regulators, ceiling roses, lamp holders, brackets, ,removing material to store for keeping in safe custody and making good to disturbed surfaces as directed by Engineer-in-Charge. |
| 93 | M&L point wiring complete with 1.5 Sq.mm single core multistranded PVC insulated & unsheathed copper conductors cable 1100 volts FRLS grade ISI make and drawn through & including PVC non metallic casing and capping with Accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI make terminal boxes fixed on wall including one PVC insulated & unsheathed multistranded copper conductor 1.5 Sq. mm as earth continuity conductor connected to common earth dolly including sitable size of pvc moulded box/hylem sheet fixed on wall for fixing the switches, switch, socket all as specified.Notes:NOTE: a) Colour coding shall be followed as given below:- i) Phase - Red/Yellow/Blue ii) Neutral - Black iii) Earth - Greenb) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit. |
| 94 | One light point controlled by one 5A switch |
| 95 | One Fan,exhaust fan point controlled by one 5A switch |
| 96 | One 5A flush type switch socket point on same board board |
| 97 | One 5A flush type switch socket point on independent board |
| 98 | M&L for concealed point wiring complete with proper colour coding using PVC insulated unsheathed multistranded copper conductor cable 2.5 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metalic rigid, double lock, ISI marked, not less than 25mm conduit with all accessories such as tee, bends, elbow, reducers, junction box etcfixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 2.5sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including shankin box/ hylem sheet in any module complete for One 5 pin, 15A switch socket combination on the independent board complete and making good disturbed surfaces with CM (1:3) to match with the existing surface & colour, complete all as specified and directed. Note: Colour coding shall be folowed as (a) Switch socket measured & paid separately. |
| 99 | S & F in replacement ceiling rose surface bakelite 65 x 50mm, flush type, 3 terminals complete all as specified and directed by EIC. |
| 100 | S & F in replacement switch piano flush type single pole one way ,5/6 Amps complete all as directed. |
| 101 | Supply and fix in replacement switch sockets combination 5 pin 5 Amps flush type 240 Volts,complete all as directed. |
| 102 | Supply and fix in replacement switch socket combination 2 in 1, 3 pin, 5 & 15 Amps flush type universal controlled by one switch flush type 240 Volts AC complete,all as directed. |
| 103 | S & F in replacement lamp holder PVC/polycarbonate insulated body type complete all as directed. |
| 104 | Supply and fixing of in replacement of LED 7 watt pin type bulb complete all as specified and directed by Engr-in-Charge. |
| 105 | Supply and fixing in replacement new generation walll/surface mounted 20 W LED batten fitting, 4 feet surface mounted provides high quality ecomonic energy saving lighting complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round/square block-02 Nos including connecting up with three core flexible copper conductor cable with suitable size and all as directed by Engr-in-Charge. |
| 106 | Supply and laying or fixing in replacement or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 2x10 sq. mm nominal cross section in service connections |
| 107 | Supplying and fixing in replacement of 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspen ded by insulating hangers not more than 1 metre apart including 4mm suspension wire,one twin core cable flat of size 10 sqmm one twin core cable flat or circular with fasten in wall with MS clamp complete all as specified and directed by Engr-in-charge. |
| 108 | S&F in replacement of double door type SPN DB 08 Way ,240V with 100A copper busbar each phase , with metalic double door type IP-43 IK 09 protection suitable for housing MCB's all as specified and directed by EIC,Note : MCB DBs shall be concealed in wall where ever posible including making good the surface to match with surrounding. |
| 109 | S&F in replacement of double door type SPN DB 04 Way ,240V with 100A copper busbar each phase , with metalic double door type IP-43 IK 09 protection suitable for housing MCB's all as specified and directed by EIC,Note : MCB DBs shall be concealed in wall where ever posible including making good the surface to match with surrounding. |
| 110 | S & F in replacement MCB SP 6-32 Amps,10KA, 'B' series 240V complete all as specified and directed. |
| 111 | S & F in replacement MCB SPN 32 Amps,10KA 'C' series 240V complete all as specified and directed. |
| 112 | Supply and fixing in replacement of ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor,complete all as specified and directed. |
| 113 | Supply and fix in replacement of exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed. |
| 114 | Supply and fixing,in replacement LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete, all as specified and directed. |
| 115 | Material and Labour in replacement for Earthing complete with MS plate electrode of size 600 X 600 X 6 mm buried directly and preferably vertically in ground (earth pit not less than 2.25 mtrs deep below ground level ) with top edge of the plate not less than 1.5 Mtrs below ground level, connected to 4.0mm dia by means of check nuts, bolts, washers etc all as shown in electrical plate No. 3 of SSR Part-I, connected to Earthing test point including earth work, 1:3:6 C1 PCC chamber, 1:2:4 B1 PCC cover with 8 mm dia steel bars at 100 mm C/C suitable size of GI pipe for earth lead protection and watering, water funnel etc. complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender