Tender For Provision Of Certain Minor Works At Technical Area At Afs Yelahanka.
Tender Value
28.81 Lakhs
Estimated cost
Bid Submission
10 Sep 2026
0 days left
EMD
57622
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Certain Minor Works At Technical Area At Afs Yelahanka.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches n exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out in soft/loose soil etc complete all as specified and directed. |
| 2 | M&L for Plain Cement Concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundations, fillings, mass concrete, complete all as specified and directed. |
| 3 | M&L for precast cement concrete block masonry with solid block, Type C1, 1:3:6 (using 20mm graded stone aggregate) exc. 10cm in width and setting in cement mortar 1:6 complete all as specified and directed. |
| 4 | M&L for 75 mm thick Plain Cement Concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in plinth protection, finished even and fair without using extra cement, complete all as directed. |
| 5 | M&L for 75 mm thick Plain Cement Concrete (1:4:8) type D-2 using 40mm graded stone aggregate as sub base, complete all as directed. |
| 6 | M&L Non skid coloured ceramic tiles 7 to 8 mm thick matt finish(square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile including screed bed 15 mm thick in CM (1:6) including dismantling of exiting tiles complete all as directed and specified. |
| 7 | M&L for glazed ceramic colour tiles, size 450x300x7mm size as in walls, set and jointed in neat cement slurry over and including 10mm thick backing coat in cement mortar (1:4) and pointed in coloured cement to match for work on vertical surface such as skirting/dado etc including dismantling complete all as directed and specified. |
| 8 | M&L for rendering 10mm thick in CM (1:6) on brick masonry/ precast cement concrete block masonry internal surfaces of walls finished even and smooth without using extra cement complete all as specified and directed. |
| 9 | M&L 10mm thick cement plaster in CM 1:6 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on internal walls on roof surfaces mixed with water proofing compound as per manufacturer's instructions, all as specified and directed. Note:- supply only of water proofing compound will be measured and paid separately under relevant item. |
| 10 | M&L 15 mm thick rendering CM 1:4 of brick masonry/ precast cement concrete block masonry surfaces and finished even and smooth without using extra cement all as specified. |
| 11 | M&L 5 mm thick rendering in cement mortar (1:3) on ceiling and finished even and smooth without using extra cement all as specified. |
| 12 | M&L for 5mm thick cement plaster in CM 1:3 on concrete surface of ceiling, chajja etc finishing the surfaces even and smooth without using extra cement mixed with water proofing compound as per manufacturer's instructions,all as specified. Note:- supply only of water proofing compound will be measured and paid separately under relevant item. |
| 13 | M&L for preparation of newly plastered surface of wall and applying two coats of Cement Base Paint over a coat of alkali resistant primer complete all as specified and as directed. |
| 14 | M&L for preparation of newly plastered wall surfaces and applying three coats of white wash complete all as directed. |
| 15 | M&L for preparation of newly plastered surfaces and applying three coats of white wash on ceiling complete all as directed. |
| 16 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 17 | Formwork to edges of concrete fair finish surface exc. 10 cm but n. exc. 20 cm wide (Horizontal or sloping) complete all as specified and directed. |
| 18 | M&L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified and directed. |
| 19 | M&L for Reinforced cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams etc complete all as specified and directed. |
| 20 | S&F powder coated aluminium frame with all fixing arrangements for doors, windows and ventilators with one or more rebates including joining cleat for fixing etc aluminium section of powder coating not less than 50 micron complete all as specified and directed. |
| 21 | S&F Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats and locking arrangement, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified and directed. |
| 22 | S&F 4.8 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 23 | M & L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 24 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as specified and directed. |
| 25 | S&F 150mm long aluminium handles, cast type, anodised complete all as specified and directed. |
| 26 | S&F 200mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 27 | S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed. |
| 28 | S&F 75mm long butt hinges, heavy weight, cold rolled mild steel, complete all as specified and directed. |
| 29 | S&F full pedestal Vitreous china wash basin, white flat back, size 550 x 400 mm including waste pipe, brackets and cutting for and pinning in ends of brackets or erecting stand and 32 mm dia PVC waste pipe including waste coupling 32mm size full thread, complete all as specified and directed. |
| 30 | S&F CP Brass centre hole basin Mixer for hot and cold water screwed down for iron pipe and fixed for 15 mm dia complete all as specified and directed. |
| 31 | S&F bib taps cast copper alloy ISI marked with crutch or butterfly handles fancy type chromium plated screwed down screwed for iron pipe of 15mm bore complete all as specified and directed. |
| 32 | S&F Stop valve/ Angle valve cast copper alloy (ISI Marked) chromium plated screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia, complete all as specified and directed. |
| 33 | S&F Vitreous China Wash down water closet pan (Pedestal pattern), white including seat cover, P trap 110 mm and fixing bolt etc (excluding flushing cistern and flush pipe) complete all as specified and directed. |
| 34 | S&F PVC flushing cistern 10 ltr capacity including PVC connection inlet and and outlet connections, brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC complete all as specified and directed. |
| 35 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 36 | S&F CP towel rail 600 mm long fixed with chromium plated brass screws and wooden /plastic cleats complete all as specified and directed. |
| 37 | S&F in Stainless steel Soap dish fix to wall complete all as specified and directed. |
| 38 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long glass shelf of size 12 cm wide x 60cm long for wash hand basin complete all as specified and directed. |
| 39 | S&F corner glass shelf 300mm X 300mm with assy of CP and fixed with Chromium plated brass screws and wooden/plastic cleats, complete all as specified and directed. |
| 40 | S&F CP grating size 100mm fixed with white cement complete all as specified and directed. |
| 41 | S&F 600 mm x 450 mm mirror of selected quality 5 mm thick glass with PVC frame fixed with chromium plated brass screws and cup washers with PVC beading complete all as specified and directed. |
| 42 | S&F 15 mm bore Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 43 | S&F 20 mm bore Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 44 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed watertubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed. |
| 45 | S&F stop valves suitable for 20 mm bore iron pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 46 | S&F PVC (SWR) floor trap 75 mm with grating including jointing to waste pipe with solvent cement fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 47 | S&F PVC (SWR) gully trap 125/110 mm with grating including jointing to waste pipe with solvent cement and fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 48 | M&L 110 mm dia PVC (SWR) type \\"B' pipes single socketed in any length with rubber ring joints, laid in trenches or floors as waste pipes jointed with solvent cement complete all as specified and directed. |
| 49 | M&L 75 mm dia PVC (SWR) type \\"B' pipes single socketed in any length with rubber ring joints, laid in trenches or floors as waste pipes jointed with solvent cement complete all as specified and directed. |
| 50 | M&L 110 mm dia PVC (SWR) Bends for connecting or diversion of pipes fixed with solvent cement complete all as specified and directed. |
| 51 | M&L 75 mm dia PVC (SWR) Bends for connecting or diversion of pipes fixed with solvent cement complete all as specified and directed. |
| 52 | M&L 150 mm dia PVC (SWR) type \\"B' pipes single socketed in any length with rubber ring joints, laid in trenches or floors as waste pipes jointed with solvent cement complete all as specified and directed. |
| 53 | M&L for cement Concrete bed (1:4:8) type D2 to150 mm dia pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed. |
| 54 | M&L for Plain cement concrete (1:3:6) type C-2 using 40 mm graded aggregate as in foundation filling & mass concrete etc complete all as specified and directed. |
| 55 | M&L for Plain Cement Concrete 1:2:4, type B1 using 20 mm graded stone aggregate in coping & in bedding & haunching against the side of wall of manholes complete all as specified and directed. |
| 56 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 57 | Removing excavated material exc.1.50 Km but n exc 5 Km and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 58 | Excavating in trenches n.exc 1.5M wide and n.exc 1.5M in depth for foundation, laying pipes, cables etc n.exc 10Sqm on plan and getting out in hard/dense soil complete all as specified and directed. |
| 59 | Formwork to soffits of suspended fair finished surface of concrete flat slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 60 | M&L for 5 mm thick rendering in cement mortar (1:3) on slab, finished even and smooth without using extra cement complete all as specified and directed. |
| 61 | S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed suitable for 20 mm bore iron pipe complete all as specified and directed. |
| 62 | Surface excavation not exceeding 30 cm deep and averaging 21cm deep and getting out in hard and dense soil complete all as specified and directed. |
| 63 | M&L for 100mm thick Plain Cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregates) as in sub-floors, sub bases, floors and pavings etc complete all as specified and directed. |
| 64 | M&L 100 mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in flooring, finishing cement concrete surface even an smooth with out using extra cement, Complete all as specified and as directed. |
| 65 | S&F for Steel rolling shutters thickness of lath 1.25mm, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, gear operated type with bevel gear box and crank handle complete all as specified and as directed. |
| 66 | S&F for Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed. |
| 67 | S&F for Ball bearing for rolling shutters complete all as specified and as directed. |
| 68 | M&L for Preparing new steel surfaces of any description and applying two coat of Synthetic enamel Paint to steel surface complete all as specified and directed. |
| 69 | Taking down cement plaster from brick or stone including raking out joints, hacking for key, scrubbing down with water, etc. walls of any description complete all as specified and directed. |
| 70 | M&L Precast cement concrete block masonry with solid blocks in type C1, 1:3:6 (20mm graded stone aggregate) exc.10cm in width and setting in mortar complete set in cement mortar 1:6 including demolition of existing block work complete all as specified and as directed. |
| 71 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and as directed. |
| 72 | S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for frame of doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ annealing, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions. |
| 73 | S&F Powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and directed. |
| 74 | Taking down Chowkhats or frames n exceeding 1.5 Sqm each (Without taking off shutters from the frame) of any description complete all as specified and directed. |
| 75 | S&F Door closer hydraulically regulated, designation No. 3, universal type, Aluminium (extruded section) body suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 76 | S&F sheet glass ordinary quality 5.5 mm thick and glazing with oil putty in square exc 0.5sq.m in each panes fixed with aluminium window and ventilator complete all as specified and directed. |
| 77 | S&F sheet glass ordinary quality 4.00 mm thick and glazing with oil putty in square n exc 0.5sq.m in each panes fixed with aluminium window and ventilator complete all as specified and directed. |
| 78 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width or aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 79 | M&L 40mm thick cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) flooring as sub base of tiles etc, complete all as specified and directed. |
| 80 | M&L for preparation of newly plastered surface of wall and applying 2mm thick wall care putty making the surface smooth and applying two coats of oil bound distemper on wall surface over one coat of chalk whiting on plaster surface, preparatory to distemper, complete all as specified and directed. |
| 81 | M&L for complete removal of existing treatment on plastered surface of walls and applying 2mm thick wall care putty making the surface smooth and applying two coat of oil bound distemper on wall surface over one coat of chalk whiting on plaster surface, preparatory to distemper, complete all as specified and directed. |
| 82 | Demolition of concrete(unreinforced) in ground floor/Roof slab and pavings n exc 15 cm thickness (below or above ground level) etc all as specified and as directed. |
| 83 | Taking down door chowkats or frames exceeding 1.50 sqm but not exceeding 4.00 sqm with shutters (without taking off shutters from the frame) of any description complete all as specified. |
| 84 | S&F Butt hinges of size 100mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed. |
| 85 | S&F extruded aluminium alloy handles fabricated type 150 mm size, anodized complete all as specified and as directed. |
| 86 | S&F in repairs Vitreous China Wash down water closet pan (Pedestal pattern) white including seat cover, P trap 110 mm and fixing bolt etc (excluding flushing cistern and flush pipe) complete all as specified and as directed. |
| 87 | S&F in repairs Wash basins, Vitreous China (flat back or angle back type) of size 550 x 400mm, including brackets, waste fittings etc complete all as specified and as directed. |
| 88 | S&F in repairs Vitreous china urinals, bowl type of size 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern and waste pipe), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, flush pipe, waste pipe grating and union for discharge pipe, complete all as specified. |
| 89 | S&F in repair PVC flushing cistern 10 ltr capacity including PVC connection inlet and and outlet connections, brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC all as specified and directed. |
| 90 | S&F GI tubing 15 mm dia medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors incl taking down exiting complete all as specified and directed. |
| 91 | S&F GI tubing 20 mm dia medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors incl taking down exiting complete all as specified and directed. |
| 92 | S&F in repair gun metal globe or gate valve 20 mm bore with iron wheel head screwed both ends for iron pipe and fixed etc complete all as specified and directed. |
| 93 | S&F in repair 600 x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 94 | S&F in repair CP Brass centre hole basin Mixer for hot and cold water screwed down for iron pipe and fixed for 15 mm dia complete all as specified and directed. |
| 95 | S&F in repairs 15mm dia CP bib taps with wall flange (Fancy type), cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule complete with check nut, 15mm bore complete all as specified and directed. |
| 96 | S&F in repairs 15mm dia Angle cock with wall flange (Fancy type), cast copper alloy, chromium plated, screwed down, screwed for iron pipe or for brass ferrule complete with check nut complete all as specified and directed. |
| 97 | S&F in repairs PVC connection 15mm size with PTMT Nut of length 600mm etc complete all as specified and directed. |
| 98 | S&F of 32/40mm waste pipe for wash hand basin, urinal and sink complete all as specified and directed. |
| 99 | S&F in repair CP towel rail 600 mm long fixed with chromium plated brass screws and wooden /plastic cleats complete all as directed and specified. |
| 100 | S&F in repair Stainless steel Soap dish fix to wall complete all as specified and directed. |
| 101 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 102 | S&F in repair Toilet paper holder with flat recessed type stainless steel chromium plated Complete all as specified and directed. |
| 103 | S&F in repair PVC floor trap 75mm dia, including joining to waste pipe fixed in cement concrete type B1, 1:2:4 (using 20mm graded stone aggregate) complete all as specified and directed. |
| 104 | S&F in repair 110 mm dia PVC(SWR) Pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors and walls including taking down old pipes complete all as directed and specified. |
| 105 | S&F in repair PVC (SWR) bends 110 mm dia in any radius with access door etc complete all as specified and directed. |
| 106 | S&F in repair PVC (SWR) pipes 75 mm single socketed with in any length with rubber ring joints, laid in trenches or in floors and walls including taking down old pipes complete all as directed and specified. |
| 107 | S&F in repair PVC (SWR) bends 75 mm dia in any radius with access door etc. complete all as specified and directed. |
| 108 | S&F in repair PVC (SWR) 75mm dia junction (single 'T') equal or unequal with access door etc. complete all as specified. |
| 109 | S&F rotational moulded polyethylene water storage tank three layer 500 ltr capacity including threaded type cover hoisted and fixed in position all as specified in SSR Pt - I including dismantling and taking down old unserviceable tank all as specified and directed. |
| 110 | S&F in repair 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass complete all as specified and directed. |
| 111 | S&F in repair PTMT Nipple 20 mm suitable for HDPE water tank (Minimum weight 20mm- 45gms ) complete all as specified and directed. |
| 112 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 113 | M&L for 20mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs pillar window cill, cooking platforms and including 20mm thick screed bed in cement mortar (1:4) incl pointing in white cement tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone (i) using marble dust with admixture of pigment to match including rounding and polishing to edges of granite slab complete all as specified and directed. |
| 114 | M&L 40mm thick cement concrete type B-1 1:2:4 using 20mm graded stone aggregate with over cement slury 3 kg of cement per sqm finished even and smooth without using extra cement complete all as specified and directed. |
| 115 | M&L for rendering 15mm thick (average) in cement mortar 1:4 on roof surfaces mixed with water proofing compound as per manufacturer's instructions, finished even and smooth without using extra cement complete all as specified and directed.Note:- supply only of water proofing compound will be measured and paid separately under relevant item |
| 116 | M & L for laying/fixing TPO membrane of non flammable water proofing of roof which shall be a 1.50 mm thick loose laid membrane using FOSROC Proofex ORG membrane or its equivalent in STP/CIPY/SIKA/PIDILITE DR FIXIT, in layers overlapped to achieve a minimum weld of 110mm. Hot air welding can be either hand applied or by means of automatic machines and the rolle either end are overlapped with 110mm are in staggered position and the membrane shall be laid over the layers of non woven geotextile fiber. The separation layer provided to prevent the mechanical abrasion and and cushioning between the fosroc proofex ORG and the concrete sub structure. The termination of Fosroc Proofex ORG by aluminium strip anchoring complete all as specified and directed. Note: Work shall be executed by authorized applicator with prior experience of more than 5 years on applying similar system. |
| 117 | M&L 15mm thick cement plaster in CM 1:4 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on external wall mixed with water proofing compound as per manufacturer's instructions, complete all as specified and directed. Note:- supply only of water proofing compound will be measured and paid separately under relevant item |
| 118 | Supply only approved integral water proofing compound complete all as specified and directed. |
| 119 | M&L for complete removal of existing treatment on plastered surface of walls and applying two coats of Cement Base Paint over a coat of alkali resistant primer complete all as specified and directed. |
| 120 | M&L preparation of old decorated ceiling surface and applying two coat of white wash complete all as specified and directed. |
| 121 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering/ cladding to wall, fixed with self tapping screws including dismantling complete all as specified and directed. |
| 122 | Taking down existing unserviceable point wiring of any type/ size of light/fan/socket/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site area complete all as specified and directed. |
| 123 | Taking down existing unserviceable light fittings, security light fittings, bulk head fittings, false ceiling light fittings etc. from any height of building complete all as specified and directed. |
| 124 | Taking down existing unserviceable Distribution boards with MCB's/MCCB's of any capacity complete all as specified and directed. |
| 125 | M&L for LED batten light fitting 20 Watts 4 feet surface / wall mounted aluminium extrusion input voltage range 250 V, input frequency 50 Hz, efficacy including 2 nos PVC Connector blocks electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. |
| 126 | M&L for LED batten light fitting10 Watts 2 feet surface / wall mounted aluminium extrusion input voltage range 250 V, input frequency 50Hz, including 2 nos PVC Connector blocks electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. |
| 127 | M&L for rewinding of the Exhaust fan 250/300mm complete with equivalent new super enamelled copper wire as per existing gauge and weight as per manufacturer's design and instructions including varnishing cleaning externally, dismantling and examining the rotor, startor, bearings, bushes, etc for serviceability subsequently oiling, greasing, assembling, testing for proper functioning, checking for safety security and proper locking, transporting back to building/site from work shop, hanging at its original position and connecting electrical connections, complete servicing, testing for noise free smooth running etc complete, shaft alignment including taking down, transportation, assembling back and refixing all as specified and directed. Note : 1.The items are to be removed from the site to be taken for rewinding from MES stores and returned to MES stores after necessary repair works. 2. The transportation for the same is included in the rate quoted. |
| 128 | Taking down old unserviceable rusted exhaust fan blades and providing new exhaust blades & screws as appropriate shape and size suitable for any make and size upto 400mm sweep complete all as specified and directed. |
| 129 | M & L for painting of exhuast fans along with blades of any make/model of size upto 400mm sweep, cleaning thoroughly with sand paper, remove residue, three coats of supper enamelled white colour paint over a coat of primer, dried in woven, printing MES No in 20mm letter size stamping template with black paint etc complete all as specified and as directed.Note :-The rate quoted deemed to be inclusive of hiring of painting equipment, taking down and shifting of exhuast fans at users site. |
| 130 | Taking out defective/worn out Ball Bearing of any make and supply and fix new bearing suitable for various makes of Exhaust fans of size 250/300mm sweep complete all as specified and as directed. |
| 131 | Taking out defective capacitor and supply and fix new capacitor of 4.0 mfd of approved make with holding clamp for various makes of ceiling fans. Please Enable Macros to View BoQ information |
| 132 | Taking out defective capacitor and supply and fix new capacitor of 4.0 mfd of approved make with holding clamp for various makes of ceiling fans. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender