Tender For Repair To Various Parapets, Chajja And Other Misc B/R Works Including Demolition Of Various Unused Reinforced Cement Concrete Tanks In Aor Of Age B/R Lekhanagar Under Ge Nasik Road
Tender Value
50 Lakhs
Estimated cost
Bid Submission
10 Sep 2026
18 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nashik → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Various Parapets, Chajja And Other Misc B/R Works Including Demolition Of Various Unused Reinforced Cement Concrete Tanks In Aor Of Age B/R Lekhanagar Under Ge Nasik Road
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Repairing of broken edges of RCC chajjas, roof projections, fins, facia and similar works by dismantling of loose and damaged/ disintegrated portion of edges (cross sectional area not exceeding 150 sqcm) with CM1:4 or cement concrete 1:1½:3 type A0 and chicken wire mesh with nails (to hold fresh mortar/ concrete) including necessary formwork etc. and scaffolding for work upto four storied buildings and finishing the surface by paint to match with existing work complete all as directed.Note: For multistorey bldgs only sccaffolding/ladder shall be used. work to be executed at any height. |
| 2 | M&L for Plastering on walls in CM 1:4 in patches not exc. 3 Sqm on the buildings upto four storied, including taking down old plastering on walls, any description including finishing the surface to match existing surfaces including necessary scaffolding and finishing the surface by interior/exterior emulsion paint to match the surface with existing work. |
| 3 | Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc. |
| 4 | M&L for brick work with fly ash bricks straight or curved on plan exc 6 m mean radius built in CM 1:6. |
| 5 | Taking down cement plaster of any description on brick or stone walls and ceiling including raking out joints, hacking for keys, scubbing down with water etc and complete all specified and as directed. |
| 6 | M&L for rendering 15 mm thick in CM 1:4 on wall/ceiling surfaces finished fair and even incl curing. |
| 7 | Two coat of exterior emulsion paint (Apex/weather coat) on new walls plastered or unplastered surfaces including preparing of new plastered, unplastered or concrete surface with safety kit arrangements to work at any height at site all as directed. |
| 8 | Two coat of exterior emulsion paint (Apex/weather coat) on old walls plastered or unplastered surfaces including preparing by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots; removing nails, making good holes, cracks by filling with putty with safety kit arrangements to work at any height at site all as directed. |
| 9 | Dismantling of steel window/ventilators any description and any size complete all as specified and directed. |
| 10 | S&F aluminium (minimum 50 micron powder coated) frame for doors, windows, ventilators and glazed partition frame of any size with one or more rebates including joining cleat, beading and connected accessories as required for fixing etc. complete all as specified. |
| 11 | S&F aluminium (minimum 50 micron powder coated) window and ventilator sliding shutters, side hung/sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays/tower bolt 150mm long (1 No.), hinges type B-21, 100mm long (2 Nos.), suitable handle (1 No.), rollers, grip etc. complete all as specified. |
| 12 | S&F 3.0 mm thick sheet glass, ordinary quality and glazing with silicon gel in square n exc 0.5sqm in each pane. |
| 13 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples. |
| 14 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar. |
| 15 | M&L for Granite (of any type) work 20mm thick machine cut, (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like laid over and including 15mm thick screed bed in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match. |
| 16 | M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. |
| 17 | Rounding to exposed edges of stone slabs, such as in steps, cooking platform, and other similar situations. (Stone slabs so provided shall be not less than 900mm in length) |
| 18 | S&F Sink made of stainless steel 1 mm thick kitchen with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495x420 mm bowl size 410x330x160mm |
| 19 | S&F in repairs kitchen plate rack made out of stainless steel 0.8mm thick complete of size not less than 750x750x200mm, duly assembeld and fixed to wall with wall screw/fasterners all as specified and directed. |
| 20 | M&L for special treatment to sunken portion (approx area 1.5-2.0 sqm) with 10mm thick plaster in CM 1:4 by using Ditachment DM 1% by weight of cement and surface made smooth after curing period two coat of Ditachment DS shall be applied @2.50 Kg/Sqm. The paste like consistancy made by using 2.5 Kg of Ditachment DS powder in one litre of admixture (The admixture is made by dissolving 1 part by volume of Nafufill SBR & 4 part by volume of water). After 7 days curing, testing shall be done by flooring for 72 hours. Finally protective plaster coat of 10mm thick in CM 1:4 shall done by using Putz Ditachment 1% by weight of cement over layer of Detachment DS. All joints of CI Pipe, Nahani trap, WC connection etc. shall be filled by mixture of cement, fine sand and 10% Nafufill SBR by weight of cement and provide 32mm dia 450mm long GI Spout light grade shall be provided in all sunken slabs to drain off water. |
| 21 | Taking up or down steel tubing and connections 15mm bore including bib taps, stop cock etc. |
| 22 | Refixing old steel tubing and connections 15mm bore in new or old position (Walls, ceiling, floors, etc.) |
| 23 | S&F 15mm bore galvanised steel water tubes, 'medium grade' with all fitting and fixed complete to walls and ceilings or laid in floors. |
| 24 | Taking up or down steel tubing and connections 20mm bore. |
| 25 | Refixing old steel tubing and connections 20mm bore in new or old position (Walls, ceiling, floors, etc.) including new fitting like elbow, socket etc Note: GI tubing shall be concealed wherever directed. |
| 26 | S&F 20mm bore galvanised steel water tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors.Note: GI tubing shall be concealed wherever directed. |
| 27 | S&F in repairs15 mm dia stop valves, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipes as for unions all as specified and directed. |
| 28 | S&F in repairs for 15 mm dia bib taps cast copper alloy, chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule. |
| 29 | S&F for bib tap 15mm bore chromium plated fancy type swan neck with crutch or butterfly handle fixed to iron pipes complete all as specified and directed. |
| 30 | S&F in repairs chromium plated cast copper alloy pillar tap with capston heads fancy type fixed to iron pipes 15mm dia. |
| 31 | S&F in repair 15 mm dia brass CP wall mixer for mixing hot & cold water screwed down for iron pipe. |
| 32 | S&F in repairs flush pipe of polyethylene of low or high density of PVC 32mm dia suitable for low level flushing cistern complete all as specified and directed. |
| 33 | S&F in repirs coloured PVC valve less, syphonic action flushing cistern, low level, 10 ltr capacity with inlet, ball valve, float, chain and pull and brackets complete all as specified and directed. |
| 34 | S&F Vitreous China EWC 1st quality with seat Cover size 630mm white, with integral foot rests (excluding flushing cistern and flush pipe) fixing seat cover including connection to drain (or outgoing pipe, and to flushing pipe & anti syphonage pipe etc with aluminium hinging device complete. |
| 35 | S&F in repair vitreous China squatting pan, ‘Orissa’pattern, size 630x450 mm white, with integral foot rests (excluding flushing cistern and flush pipe) |
| 36 | S&F in repairs vitreous china wash hand basin white, flat back of size 550x400 mm excluding tap, anchor bolt for fixing as per maufacturer norms, including 32mm bore PVC waste pipe and CP waste coupling complete all as specified and as directed. |
| 37 | S&F in repairs Chromium plated shower roses 65mm size with or without swivel joints, any size, including fixing to steel pipe complete all as specified and directed. |
| 38 | S&F ready made PVC conection 15mm bore, 450mm long with end brass nuts, screws and PVC washer complete all as specified and directed. |
| 39 | S&F in repair waste fittings 40mm brass chromium plated for sinks, basins etc with long screwes shanks and fly nuts flange end bedded in red lead cement and other end fixed in sink complete all as specified and directed. |
| 40 | M&L for PVC (SWR) floor trap, plain with chromium plated grating of size up to 100mm and including jointing with solvent cement for dia of outlet 75mm. |
| 41 | S&F in repairs 600x900mm decorative designer looking bevelled edge mirror of selected quality 5.50mm thick mounted on 2.00mm thick laminated sheet with necessary fixing with CP screws and arrangement complete all as specified and as directed. |
| 42 | S&F in repairs 20 mm dia 600 mm long brass chromium plated tublar towel rail 'D' shape. |
| 43 | S&F Health facuet (ABS body) mild steel chromum plated suitable for 15mm dia pipe with 1.25mm long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and directed. |
| 44 | S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 120 mm wide & 600 mm long with chromium plated bracket guard and railing. |
| 45 | S&F in repair 5 mm thick glass shelf \\"Corner\\" type size 300x300mm including necessary brackets front edge of glass rounded and mounted with CP railing complete. |
| 46 | S&F in repairs PVC mirror cabinet size 450x600 mm of selected quality fixed to wooden plugs with chromium plated brass screws and cup headed washer all as specified and directed. |
| 47 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debris out of MOD land and rubbish off the premises. |
| 48 | M&L for Non-skid coloured ceramic joint free tiles 400x400x7 to 8 mm thick or above size (square/rectangular) in flooring etc. laid over screed bed 15 mm thick in CM 1:6, set and jointed in neat cement slurry and pointed in coloured cement to match. |
| 49 | M&L for colour glazed cermic tiles 300x450x7mm thick or above size in vertical surface, set and jointed in neat cement slurry & pointed with coloured cement to match laid over and including rendering 10mm thick in CM 1:4 as in backing coat on fair surfaces of brick wall. |
| 50 | M&L for 600x600 mm or above (or equivalent area in rectangular size), 10 mm thick double charged vitrified tiles (soluble salt not acceptable) as in flooring, laid in any shape/pattern over and including 15 mm thick screed in CM 1:6 as in floors. |
| 51 | M&L for 10 mm thick double charged vitrified tile as in vertical surface, set and jointed in neat cement slurry & pointed with coloured cement to match laid over and including rendering 10mm thick in CM 1:4 as in backing coat on fair surfaces of brick wall. |
| 52 | Demolition of reinforcement cement concrete (reinforcement cut as required to faciliate demolition) of any description and any position not other wise specially provided including removal of debris out of MOD land and rubbish off the premises complete all as specified |
| 53 | Separating, scraping and cleaning reinforcement obtained from item No 53 above. |
| 54 | S&F inrepair 500 litre capacity ISI marked rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) double layer hoisted and fixed in position including 20/25mm dia PTMT float valve complete set all as sepecified and directed. |
| 55 | S&F inrepair 1000 litre capacity ISI marked rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) double layer hoisted and fixed in position including 20/25mm dia PTMT float valve complete set all as sepecified and directed. |
| 56 | Excavation in post holes (or similar holes) each not exc 0.5 cum getting out and removing surplus soil to a distance exc 50 m and making good surface in soft/loose soil complete all as specified and as directed. |
| 57 | M&L for PCC(1:4:8) type D-2 using 40mm graded stone aggregate in foundation mass concrete and filling over rammed earth complete all as specified and as directed. |
| 58 | Dismantling wrought iron or mild steel any description such as steel gate, steel frame works, purlins, rafter, railings, balusters and window guard bars as directed. |
| 59 | S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St-240 complete all as specified and as directed. |
| 60 | M&L for preparing new untreated steel or iron surfaces over 10cm width or girth and two coats of synthetic enamel paint over a coat of red oxide primer. |
| 61 | Dismantling AC corrugated or semi corrugated sheets in wall cladding complete all as specified and directed. Please Enable Macros to View BoQ information |
| 62 | Dismantling AC corrugated or semi corrugated sheets in wall cladding complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender