Tender For Construction Of New Ayush Dispensary At Village At Chandergee
Tender Value
29.12 Lakhs
Estimated cost
Bid Submission
02 Sep 2026
0 days left
EMD
58240
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kulgam → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of New Ayush Dispensary At Village At Chandergee
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual/ mechanical means over areas (Exceeding 30 cm and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including dressing of sides and bottom, disposal of surplus excavated material as directed by Engineer-in-charge including all leads lifts and dewatering if any during execution of all operations of work complete (All kinds of soil) |
| 2 | Providing and laying hand packed stone soling in foundation, under floors etc, incl. ramming, watering and consolidation complete, cost and carriage of all matereials involved upto site of work complete |
| 3 | Providing and Laying of Cast-in-situ cement concrete (1:cement: 4 Coarse sand: 8 graded stone agrregate 40 mm nominal size ) upto plinth level, including all carriages of all materials and curing but excluding cost of form work. |
| 4 | Providing and laying in position specified grade of reinforcement cement concrete including curing but excluding the cost of centering shuttering finishing and reinforcement. All works upto the level of plinth 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded aggregates 20 mm nominal size crushed) |
| 5 | Reinforcement in cement concrete work in beams suspended floor balconcies shelveees chajjas lintels bonds, plain windows sills stair caese and spiral stairs cases upto five level including curing but excluding the cost of centering shuttering finishing and reinforcement with reinforced cement concrete 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregates 20mm nominal size crushed) |
| 6 | Providing and laying in position specified grade of reinforcement cement concrete including curing but excluding the cost of centering shuttering finishing and reinforcement. All works upto the level of plinth 1:2:4 (1 cement: 2 coarse sand: 4 graded aggregates 20 mm nominal size crushed) |
| 7 | Centering and shuttering including struttimg propping etc and removal of form work for foundation footing bases of column |
| 8 | Centering and shuttering including struttimg propping etc and removal of form work for Lintel Beams. |
| 9 | Centering and shuttering including struttimg propping etc and removal of form work for suspended floors roofs landings balconcies and acess platforms |
| 10 | Brick work with FPS brick of class designation 75mm in foundation and plinth in cement motar 1:6 (1 cement: 6 coarse sand) including extra over brick work in superstructure above plinth level upto floor five level |
| 11 | Brick work with FPS brick of class designation 75mm in foundation and plinth in cement motar 1:6 (1 cement: 6 coarse sand). |
| 12 | Structural steel work welded in built up sections trusses and framed work including cutting hoisting fixing in position and applying a proming coat of approved steel primer all complete including cost and carriage of all materials involved upto site of work complete |
| 13 | 6 mm cement plaster to ceiling of mix 1:3 (1 cement: 3 fine sand) |
| 14 | 12 mm cement plaster 1:6 (1 cement: 6 fine sand ) |
| 15 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete50 mm thick with 20mm nominal size stone aggregate. |
| 16 | Providing and applying white cement based putty of 2mm thick of approved brand and manufacturer over the platered wall surface to prepare the surface even and smooth complete |
| 17 | Finsihing walls with acrylic smooth exterior paint of required shade on new work (Two or more coats applied @ 1.67 l/10sqm and incl priming coat of exrerior primee applied @ 2.20 kg/10Sqm |
| 18 | Steel reinforcement for RCC work straightning cutting bending placing inn position and bending all complete upro plinth level TMT bars of Grade 500D or more |
| 19 | Providing and fixing wood work in frames of doors, windows and other frames, wrought framed and fixed in position (including cost of all materials, leads lifts and carriages etc upto site of work complete (Imported wood) |
| 20 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 10 kg/sqm including fixing of (3.5mm thick) float glass panes Rate for thickness of glass panes including lSI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Imported Wood (35mm thick) |
| 21 | Providing and fixing 35mm thick ISI marked flush door shutters non decorative type solid core of block board construction with frame of hard wood all around 20 mm thick & well matched teak 3 ply veneering with vertical grains or cross bands & face veneeres on both faces incl. bright finished ISI marked butt hines with necesaary screw imported kail wood |
| 22 | Providing & fixing of 4 mm thick float glass in fixed panes with budloo wooden beading of required width fixed with nails complete (glass panes to be measured in fitted and finished form) |
| 23 | Applying priming coat on new wood and wood based surface with ready mixed wood primer ( including cost of all materials, leads lifts and carriages etc upto site of work complete) |
| 24 | Painting with synthetic enamel paint of approved brand and manufacture of required shade and colour to give smooth finish with two or more coats on new wood and based surface |
| 25 | Providing 40 x 5 mm flat iron hold fast 40 cm long including fixing to framewith 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix (1 cement: 3 coarse sand : 6graded stone aggregate 20 mm nominal size) |
| 26 | Providing/fixing of door, window stard wire fitting |
| 27 | A) T Bolts |
| 28 | i) 150 mm |
| 29 | ii) 100 mm |
| 30 | B) Handle |
| 31 | i) 150 mm |
| 32 | ii) 125 mm |
| 33 | C) L drops |
| 34 | i) 200 mm |
| 35 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 36 | Providing and fixing 35mm thick wire gauze shutters using galvanized M.S wire gauge of average width for aperture 1.4 mm with wire of dia 0.63 mm for doors, windows and clerstory windows including ISI marked black enameled M.S butt hinges with necessary screws (Imported Wood). |
| 37 | Providing and fixing of ceramic anti skid floor tiles of thickness 6 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA or equivalent make in colors, shades in skirting, risers, and dados over 12 mm thick bed of cemenet mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm incl pointing in white cement incl carriages complete job |
| 38 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 39 | Carriage of materilas by Mechanical transportation from source to site work |
| 40 | Stone aggregates from an average lead of 10km |
| 41 | Sand from an average load of 15km |
| 42 | Bricks from an average lead of 10 km |
| 43 | Constructing masonry chamber 60x60x100 cm inside with 75 class bricks in 1:4 cement mortar with hinged cover fixed in cement concrete slab in 1:2:4 mix including excavation, foundation concrete 1:4:8 and inside 12 mm plastering in cement mortar 1:3 with a floating coat of neat cement with SFRC covers complete job |
| 44 | Sanitary and Plumbing |
| 45 | i) 100mm Dia PVC pipe |
| 46 | ii) 75mm Dia PVC pipe |
| 47 | iii) 100mm PVC Collar |
| 48 | iv) 75mm PVC Collar |
| 49 | v) 100 mm PVC Elbow |
| 50 | vi) 100 mm PVC TEE |
| 51 | vii) 100mm PVC Door TEE |
| 52 | viii) 100mmx75mm PVC Reducer Socket |
| 53 | ix) 75mm PVC Tee |
| 54 | x) 75mm PVC elbow |
| 55 | xi) 75mm PVC cowl |
| 56 | Xii) Floor Trap |
| 57 | Providing and fixing 3 layers PP-R (Poly Propylene Random Copolymer) pipes conforming to IS 15801 UV stablized and anti microbial fusion welded having thermal stablity for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings this includdes testing of joints complte as per the direction of engineer in charge PN-16 pipe 20mm OD (SDDR-7.4) |
| 58 | Providing and fixing 3 layers PP-R (Poly Propylene Random Copolymer) pipes conforming to IS 15801 UV stablized and anti microbial fusion welded having thermal stablity for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings this includdes testing of joints complte as per the direction of engineer in charge PN-16 pipe 32mm OD (SDDR-7.4) |
| 59 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI 12701 marked with cover and suitable locking arrangement & making necesssary holes for inlet outlet & overflow pipes (triple layer) |
| 60 | Providing and fixing water closet sqatting pan indian type WC pan with 100mm sand cast iron P or S trap. 10 litres low level white PVC flusing cisterian including flush pipe of approved make with manually controlled device handle/level conforming IS 7231 with all fitting and fixtures complte including cutting and making good the walls and floors wherever required white vitreous china orissa pattern WC pan of size 580x44o mm with intergral type foot rests |
| 61 | Providing and fixing 15mm nominal borre C.P brass long nose bib cock of approved quality conforming to IS standard & weighing not less than 810g |
| 62 | Providing and fixing 15mm nominal borre C.Pangle valve of approved quality conforming to IS standard & weighing not less than 810g |
| 63 | Providing & fixing PTMT soap dish holder having length of 138 mm breadth 102 mm height 75 mm with concealed fitting arrangements weighing not less than 106gms |
| 64 | Providng and fixing PTMT tower rinf trapezodial shape 215 mm long 215 mm wide with a minimum distance of 37mm from wall face with concealed fitting arragements of approved quality & colour weighing not less than 88 gms |
| 65 | Providing and fixing 600X450 mm beveled edge mirror of superior glass of approved quality complte with 6mm thick hard board ground fixed the wooden cleats with C.P brass screw & washer complete |
| 66 | Provind and laying of precast cement concrete ring mm dia in soak pit including cost of trenchinh and refilling prcast cement concrete cap |
| 67 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gram/m2 |
| 68 | Providing valleys of 90cm wide overall in plain G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 1.00 mm thick with zinc coating not less than 275 gram/m2 |
| 69 | Supply and filling stone boulders under floors including watering, ramming and consolidating with hand rammer with aggregate size not exceeding 90 mm including cost and carriage of all materials involved upto site of work complete. 24.68 4.4424 29.1224 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender