Tender For Street Lighting Beautification Work In The Koyal Enclave Scheme, Loni.
Tender Value
1.97 Crore
Estimated cost
Bid Submission
16 Sep 2026
23 days left
EMD
3.95 Lakhs
Bank guarantee accepted
Document Fee
7198
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ghaziabad → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Street Lighting Beautification Work In The Koyal Enclave Scheme, Loni.
BOQ
| Sl. No. | Item Description |
| 1 | Supply of 7Mtrs Decorative pole and suitable for galvanised mild steel tubes with cast aluminium embellishments and the pole base (Single piece) bottom dia height 450mm dia cast aluminium, suitable for 140 mm OD pipe having following specification. The pole have at bottom profile (140 mm dia x 2000 mm height) including with cast aluminium embellishment to decorative pole and middle Section (114 mm dia x 3000 mm height) and top profile (90mm x 2000 mm height) achieving total height 7 mtr. with base plate 450 x 450 x 20mm welded at bootom of the pole base plate. The pole are primer coated and painted with polyurethane paint (PU Paint) DFT not less than 90 micron. The pole has a service window with sleeve type theft proof window cover with at the bottom comprising four way 32Amp. Terminal Connector and connection along with MCB. The Pole can be mounted without foundation Bolts. ) with 5 years warrantee (Make- Klite, transrail, goldwyn, Surya,Luster ,shri Gee and equivalents. ) as per approval of engineer Incharge. |
| 2 | Supply of Decorative Double Arm Bracket CNC Dhanush at 2500mm width and Double Arm Height 2000mm with 02 umber 120W Led based Droup Down light. The Luminaire is made of Cast Aluminium. A Polycarbonate Clear/frosted Diffuser is provided for glare free lighting. should have minimum 120W, lumen efficacy 120lm/W, CRI >70, CCT 4000K, THD <10%, IP-65, burning hour >50,000 Hrs. and surge protection should be minimum 4 KV, suitable capacity inbuilt driver, suitable for 230V. 50Hz single phasc.. with 5 years warrantee. (make- Klite, transrail, goldwyn, Surya,Luster,phillips,crompton,havells or equivalent) as per approval of engineer Incharge. |
| 3 | Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required. |
| 4 | Supply & Fixing of Foundation Bolts with all accessories with installation of pole complete. The foundation bolt should be 4 Nos with 2 Nuts and 2 Washers of M20 x 500mm, J type, (Grade 4.6). The Foundation should be of RCC 1200mm x 400mm. Height of foundation above ground level (150mm) may be revised to suit the site conditions especially considering the expected water level stagnation. The height of coarse should be atleast 150mm. 4 Nos. of foundation bolt have to be oriented (located), while casting the foundation such that the door of the electrical junction box face the required direction. PVC / GI pipe for entry of supply cable. Parameters considered in RCC foundation design Load bearing capacity of soil (LBC)- 10 Mt/m² (Minimum) Basic wind speed- 50 m/s. Grade of steel reinforcement- Fe 415, Grade of foundation bolt : 4.6 matching with the Pole specification and aesthetics. The foundation will be as per the drawing of the manufacturer and approval of Engineer-in-charge. |
| 5 | Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 2 x 1.5 sq. mm. |
| 6 | Supply and laying of 16 Sqmm 4 core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade in Existing RCC / Hume / Metal / PVC Pipe as directed by the Engineer-Incharge, complete in all respect. Incuding excavation and refilling .The armouring of the cable shall be properly connected with the earth conductor by clamps etc. |
| 7 | Supply and laying of 35 Sqmm 3.5 core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade in Existing RCC / Hume / Metal / PVC Pipe as directed by the Engineer-Incharge, complete in all respect. Incuding excavation and refilling .The armouring of the cable shall be properly connected with the earth conductor by clamps etc. |
| 8 | Supply and laying of 50 Sqmm 3.5 core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade in Existing RCC / Hume / Metal / PVC Pipe as directed by the Engineer-Incharge, complete in all respect. Incuding excavation and refilling .The armouring of the cable shall be properly connected with the earth conductor by clamps etc. |
| 9 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 35 Sq.mm x 3.5 core (32mm). |
| 10 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 50 Sq.mm x 3.5 core (35mm). |
| 11 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal). |
| 12 | Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. |
| 13 | Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. 40A TPN |
| 14 | Supply and boring of 2.5 mtr. Long 20mm dia MS rod earthing with 7/16 SWG GS wire two Nos. clamp requred nuts and bolts complete in all respacts. |
| 15 | Excavation including refilling as required (0.45 x 0.45 x 0.80 = 0.1215) x 396 |
| 16 | Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand). |
| 17 | Providing and Laying in position Cement concrete of specified grade 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) (0.45 x 0.45 x 0.1 = 0.18225) x 396. |
| 18 | Supply & Eracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB's (Four Pole 36 KA with thermal magnatic elease)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc.The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only. Incoming 200 Amp. MCCB-1 No. Outgoing 63 Amp. MCCB-8 Nos. (Cat. B.Pannel outdoor Cubicle Type) |
| 19 | Supplying Installation, Testing and Commissioning of Circular/ Rectangular/square LED RGB/ RGBWW/ RGBNW/RGBA/RGBW (as per site requirement) Facade Floodlight/ Projector luminaire for facade lighting with Pressure Die-cast aluminium housing powder-coated finish, with inbuilt driver of following wattage as given below. The luminaire bracket shall be made of cold-rolled steel & shall be so designed that the luminaire can be tilted to ±90°, the scale shall be provided for rotation degrees. The luminaire shall be IP66 protection also having silicon gasket between optical cover & LED chamber to ensure proper IP66 protection and impact resistance of IK 07. CRI>80, SDCM<5, THD<10%. as per IEC 61000-3-2, under voltage, over voltage protection, driver inbuilt surge protection of 4KV and external surge protection (SPD) of 10 KV common mode/differential mode, Driver Efficiency>85%, EMI/EMC as per CISPR-15. There should be options of beam angles of 5/10/15/20/25/30/40/45/60 degree. Luminaire should have efficacy of minimum 35 lm/W for RGB/RGBNW/RGBWW/TNW and 65 lm/W for mono colour options. Luminaire shall be capable of producing dynamic colour changing light for with 16 million colours by DMX/Ethernet based control. The beam angle of the fitting shall be narrow, medium, wide or asymmetric as per the requirement. Luminaire shall be complete with replaceable driver and capable of operating at line voltage without any separate power supply from 100-270 V AC, 50 Hz with power factor >0.9. Fixture shall be suitable to operate at an ambient temperature range of -10°C to +50°C. Lifetime of complete luminaire(LED ,Driver , Electrical & control circuitry) shall be at least L70:50000 burning hours at 50°C. Luminaire shall be conforming to BIS: (IS10322) with dully R Number marked and shall be complete with all necessary accessories required for proper working of fixture including connection/inter connection with weather proof ISI Marked copper conductor of minimum size 1.5sqmm connection cables and accessories, Integral male/female water proof connectors IP 68 etc. as required.The successful bidder shall submit the following certifications/reports for approval before supply of materials: product data sheets, LM79 report from NABL accredited lab, illuminance diagram, polar curve & LM80 report issued by LED manufacturer, RoHS Compliance. 60W |
| 20 | Supplying Installation, Testing and Commissioning of LED White/ Worm White suitable for exterior use having >= I P66 rating (as per site requirement). Flexible light strip of standard length with 10-15 Watt per meter. Minimum System lumens 450 lumens/meter and System Lumen Efficacy > 30lm/w. Luminaire light beam spread-100-110°, The Strip should have 2IP66 protection and is offered >= I P66 rated connectors to join the LED Strips in continuity. The luminaire must be offered with Aluminium channel for mounting the strip lights. The product should be complete with all accessories and Driver. Lifetime of complete luminaire (LED, Driver, Electrical & control circuitry) shall be at least L70:50000 burning hours at 50 deg * C Luminaire shall be conforming to BIS (IS 10322) with dully R Number marked. Luminaire shall be complete with replaceable driver and capable of operating at line voltage without any separate power supply from 24 V DC, Fixture shall be suitable to operate at an ambient temperature range of - 10 deg * C to 50 deg * C The successful bidder shall submit the following certifications/reports for approval before supply of materials: product data sheets, LM79. report from NABL accredited lab, illuminance diagram, polar curve & LM80 report issued by LED manufacturer & RoHS Compliance along with CE certificate. Make Phillips/ Orient /surya/Havelles/Bajaj /Crompton or equivalent) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 23 daysSep 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender