Tender For Public Platform Construction Work Near Baba Ramdev Temple, Mehrasar
Tender Value
5 Lakhs
Estimated cost
Bid Submission
28 Aug 2026
7 days left
EMD
10000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bikaner → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Public Platform Construction Work Near Baba Ramdev Temple, Mehrasar
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in foundation excavation up to 1.5m, ramming bottom, dressing sides, back filling and disposal of surplus soil with in a lead of 50m. |
| 2 | Cement concrete in foundation and plinth with stone ballast size 40mm including curing and compaction etc in 1:4:8 mix |
| 3 | Brick work in foundation and plinth using bricks of class designation-75 in CM 1:6 |
| 4 | Brick work in super structure using bricks of class designation-75 in CM 1:6 |
| 5 | S & F Stone lintels |
| 6 | P & L First class stone slab roof in CM 1:4 |
| 7 | P & L brick bats on roof in cm 1:4 |
| 8 | S & F Glaze tiles on roof |
| 9 | Cement concrete in foundation and plinth with stone ballast size 40mm including curing and compaction etc in 1:6:12 mix |
| 10 | S & F Polished Kota Stone Flooring |
| 11 | 20mm thick plaster on new work including curing and racking of joints in CM 1:6 (Tanki) |
| 12 | 20mm thick plaster on new work including curing and racking of joints in CM 1:6 |
| 13 | Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete (PWD BSR-2026 - Less%) |
| 14 | Finishing wall with acrylic smooth exterior paint of required shade including all scaffolding New work (Two or more coat including base coat of water proofing cement paint) (PWD BSR 2026 Less 10%) |
| 15 | Wall painting with plastic emulsion paint of required shade including all scaffolding.New work ( Two or more coat incuding base coat of water proofing cement paint) -(PWD BSR-2026 Les-10%) |
| 16 | S & F Iron door |
| 17 | Fixing of Iron Door |
| 18 | S & F Wire mess on window |
| 19 | S & F iron bars on window |
| 20 | Providing and Fixing in position collapsible steel shutters with vertical M.S.Channels 20x10x2mm and bracket with flat iron diagnals 20x5mm size with top and bottom rail of T-iron 40x40x60mm with 40mm dia steel pulleys ball bearing Complete with bolts nuts locking arrangments inside and outside stoppers handles etc as per specification including applying a primming coat of approved steel primer To be measured and paid as per outer dimension (PWD BSR 2026 Less-10%) |
| 21 | enamal painting door and window |
| 22 | Wiring for fan/light point in PVC condut pipe as per specification |
| 23 | Wiring for light/Power point in PVC condut pipe as per specification |
| 24 | Wiring for circuit/submain as per specification- 2x1.5Sqmm |
| 25 | Supply , Installation, Testing and Comissioning of ISO certified company made self contained drinking water coolar with BEE Rated energy efficient hermetic sealed type compressor,non CFC refrigerent suitable for operation on 230V/1pH/50Hz ac supply,Full stainless steel (S304)body and tank , stainless steel water tray,minimum two nos faucets and suitable drainage system complete in all respect with 300mm height MS fabricated and painted plateform. complete in all respect of the following capacity. NABL accredeated / CPRI/ ERDA lab testing reports with OEM certificate must submitted to engineer in charge. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . E223602 cooling capacity 80 Ltr./Hr. and storage capacity 120 Ltrs. (RUIDP BSR- |
| 26 | Supply Installation testing & Commissioning of ISO certified manufacturer made Monoblock motor pump set ISI marked (IS:9079-2002) with TEFC motor, motor should be IE2 class as per IEC 60034-2-1: 2007, IEC 60034-30: 2008, & IS12615:2011. with Stainless steel Impellor, Stainless steel shaft, Mechanical seal, Single/Three phase ( 240 - 440 V ) permanent split capacitor type (PSC), fitted with thermal overload protection, . Including cost of hardware etc on existing platform complete. Pump shall have following HP Rating, phase, Head, minimum Discharge respectively complete in all respect. Appropriate type test certificate / OEM test report shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . E210801 0.5 HP, 1-Ø, (3 - 18)Mtr, (100-26) LPM Each.(PHED BSR- |
| 27 | S & F PVC water storage tank |
| 28 | S & F Bib cock |
| 29 | S & F wash Basin |
| 30 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1 metre spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work Exposed on wall) ( PWD BSR2022. Less-10%) 20mm nominal size |
| 31 | S & F Fullway valve-20mm |
| 32 | Yojna board & Cotingency charges Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender