Tender For Extension Of Library In Gurha Slathia Upper Pyt Gurha Slathia Upper Block Vijaypur Under Ddc 2026-27.
Tender Value
9.80 Lakhs
Estimated cost
Bid Submission
01 Sep 2026
8 days left
EMD
19600
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Samba → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Extension Of Library In Gurha Slathia Upper Pyt Gurha Slathia Upper Block Vijaypur Under Ddc 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:1.5:3 (1 cement: 1.5 fine sand : 3 graded stone aggregate 20mm nominal size),including all leads , lifts, and carriage complete. |
| 2 | Brick work with FPS bricks of class designation 75 in foundation and plinth in 1 cement: 4 fine sand mortar |
| 3 | Extra for brick work in superstructure above plinth level upto floor V level. |
| 4 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately |
| 5 | Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per irection of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately) Second Class Deodar wood |
| 6 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze |
| 7 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. |
| 8 | Centring and shuttering including strutting, propping etc and removal of the formwork for soffit |
| 9 | Reinforcement for RCC work including straightening, cutting, bending, placiing in position and binding all complete |
| 10 | 6mm C.sand plaster in ceiling 1:3 mix: Sarpanch room, Pantry, Secy room, meeting hall, computer room, corridor, toilet, ver./entrance |
| 11 | 12mm thick cement plaster of 1cement:6 fine sand mix: Sarpanch room, Pantry, Secy room, meeting hall, computer room, corridor, toilet, ver./entrance, deductions, Toilet D, Window W |
| 12 | 15 mm thick cement plaster of 1 cement: 6 fine sand mix: Externally, Window W, V |
| 13 | Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete size of tile 600x600 mm |
| 14 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. 15 mm nominal outer dia pipes. |
| 15 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. 20 mm nominal outer dia pipes. |
| 16 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. 25 mm nominal outer dia pipes. |
| 17 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. |
| 18 | Distempering with 1st quality acrylic washable distemper (ready made) of approved manufacture (two or more coats) and of required shade and colour on new work. |
| 19 | Finishing walls with water proofing cement paint of approved brand and manufacture to give an even shade on new work (two or more coats) |
| 20 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license]. |
| 21 | Providing and fixing short nose bib cock of approved quality 15 mm nominal bore |
| 22 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes 110 mm diameter |
| 23 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes 75 mm diameter |
| 24 | Providing and fixing angle valve etc complete |
| 25 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 26 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete |
| 27 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, includingpainting of fittings and brackets, cutting and making good the walls wherever required : 610x460mm with Bowel depth 200mm |
| 28 | Carriage of material Sand (5 km) |
| 29 | Carriage of material Bajri (5 km) |
| 30 | Carriage of material Brick (5 km) |
| 31 | CIB with granite plate etc complete |
| 32 | Providing and fixing P.V.C. waste pipe for sink or wash basin includingP.V.C waste fittings complete flexible |
| 33 | Providing and fixing uplasticized PVC connection pipe with brass unions 45 mm |
| 34 | Providing and fixing bright finished brass tower bolts (barrel type) withnecessary screws etc. complete. : |
| 35 | Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barreltype) with necessary screws etc complete.. :150x10 mm |
| 36 | Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992with necessary screws etc. complete :125 mm |
| 37 | Providing and fixing 15 w electric bulb |
| 38 | Providing and fixing electric fan |
| 39 | Providing and fixing exhaust fan |
| 40 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 41 | Wiring for power point Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender