Tender For Repair To Steel Furniture Including Painting To Steel Furniture At 13 Brd/16 Brd Af Stn Palam Under Ge (Af) Gurgaon No-1.
Tender Value
42 Lakhs
Estimated cost
Bid Submission
10 Sep 2026
10 days left
EMD
84000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gurgaon → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Steel Furniture Including Painting To Steel Furniture At 13 Brd/16 Brd Af Stn Palam Under Ge (Af) Gurgaon No-1.
BOQ
| Sl. No. | Item Description |
| 1 | Schedule-A |
| 2 | Removal of following existing unserviceable steel/UNSV components of various furniture items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, screwing, welding, providing hinges, denting, applying steel putty for leveled surface, placing every part in-tact and painting the disturbed portion of Almirah Steel Med Complete all as specified and as applicable as drawings,FD-1032. NOTE : Work will be executed where the furniture exist in BSO's Furniture Yard at AF Stn Palam as directed by Engineer-in-Charge:- |
| 3 | Removing of unserviceable and worn out legs and providing new legs made out of 1mm thick MS sheet fabricated to shape as per existing almirah steel with shelves/Half S & Half H Large complete all as specified and directed. |
| 4 | Removing of unserviceable shelves and providing new shelves made out of MS sheet 1.00mm thick with fixing brackets of existing type almirah Med steel complete all as specified and directed. |
| 5 | Material and labour for removing unserviceable shutter and providing new shutter using MS sheet 1.00mm thick as per existing shape Almirah Med steel. (Drg No FD-1032) complete all as specified and directed. |
| 6 | Taking down existing unserviceable MS clips with screw/nuts and bolts of almirah steel with shelves/Half S & Half H medium (Drg No FD-1032) refixing/weldling with new items, MS clips with screws/nuts & bolts complete all as specified and directed. |
| 7 | All as per item No 1.05 above but locks (6 levers ) of make link or Harrison approved by GE. |
| 8 | All as per item No 1.05 above but CP handle with bolt. |
| 9 | All as per item No 1.05 above but locking box / device |
| 10 | Scratching of scratches/dentings to powder coated two coats steel surface with emery paper, applying metel putty wherever required and repair inside/out side with Spray painting (Hammer tone) duly matched with existing surfaces or as directed by Engr-in-charge. |
| 11 | Scratching of scracheds/dentings to powder coated steel surface with emery paper, applying metel putty wherever required and repair inside only with Spray painting (Hammer tone) duly matched with existing surfaces or as directed by Engr-in-charge. |
| 12 | Scratching of scracheds/dentings to powde coated steel surface with emery paper, applying metel putty wherever required and repair out side only with painting Spray duly (Hammer tone) matched with existing surfaces or as directed by Engr-in-charge. |
| 13 | All as per item No 1.00 here-in -before but ALMIRAH LARGE STEEL FD-1031:- |
| 14 | Removing of unserviceable and worn out legs and providing new legs made out of 20 gauge MS sheet fabricated to shape as per existing almirah steel with shelves/Half S & Half H Large complete all as specified and directed. |
| 15 | Removing of unserviceable shelves and providing new shelves made out of MS sheet 1.00mm thick with fixing brackets of existing type almirah large steel complete all as specified and directed. |
| 16 | Material and labour for removing unserviceable shutter and providing new shutter using MS sheet 1.00mm thick as per existing shape Almirah large steel. (Drg No FD-1031) complete all as specified and directed. |
| 17 | Taking down existing unserviceable MS clips with screw/nuts and bolts of almirah steel with shelves/Half S & Half H Large (Drg No FD-1031) refixing/weldling with new items, MS clips with screws/nuts & bolts complete all as specified and directed. |
| 18 | All as per item No 2.02 above but locks (6 levers ) of make link or Harrison as approved by GE. |
| 19 | All as per item No 2.02 above but CP handle with bolt. |
| 20 | All as per item No 2.02 above but mild steel locking rod. |
| 21 | All as per item No 2.02 above but locking box / device and interial locking box |
| 22 | Scratching of scratches/dentings to powder coated two coats steel surface with emery paper, applying metel putty wherever required and repair inside/out side withSpray painting (Hammer tone) duly matched with existing surfaces or as directed by Engr-in-charge. |
| 23 | Scratching of scracheds/dentings to powder coated steel surface with emery paper, applying metel putty wherever required and repair inside only with Spray painting (Hammer tone) duly matched with existing surfaces or as directed by Engr-in-charge. |
| 24 | Scratching of scracheds/dentings to powde coated steel surface with emery paper, applying metel putty wherever required and repair out side only with painting Spray duly (Hammer tone) matched with existing surfaces or as directed by Engr-in-charge. |
| 25 | All as per item No 1.00 here-in -before but CHARPOY IP WITH HARD TOP ,FD/MAP-II/01 |
| 26 | 12 mm BWP as per IS 710 ply placed in position as shown in drg. |
| 27 | Rubber shoes 32mmx32mm of high quality placed in position as shown in drg. |
| 28 | Scratching of scratches/ dentings to powder coated two coats steel surfaces with emery paper ,applying metal putty wherever required and repair with painting duly matched with existing surfaces. |
| 29 | All as per item No 1.00 here-in -before but TABLE BEDSIDE STEEL |
| 30 | 18/19mm thick pre-laminated MDF board exterior for sides, top and front of table bed side of size 450mmx500mm placed in position with 4mm thick teak wood edging alround the edges of the top as shown in drg with screws. |
| 31 | Front Legs to table bed side steel made of 18mm MS square pipe placed in position as shown in drg. |
| 32 | CP steel 100mm long handle to the drawers of the table bed side steel placed in position as shown in drg. |
| 33 | Supply and fix new drawer front for table bed side made of pre-laminated MDF board exterior 18 mm All as per Drg. |
| 34 | Replacement of worn out back conduct MS 25 mm Sq pipe 16 gauge whrerever required as directed and fixing as shown on drg . (welding points shall be measured and paid separately. |
| 35 | Mig welding of broken joints MS members (tabular) . |
| 36 | Supply and fix plywood back 6 mm IS 710 grade for table bed side All as per Drg. |
| 37 | Material and labour for Scrapping of old polish and dirt from the surfaces of bidding by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge. |
| 38 | Painting with two coats of black synthetic enamel paint to complete table etc. all as specified and directed. |
| 39 | Supply and fixing of sides and bottom of Bed side table : It shall be made out of one side melamine faced pre-laminated MDF board exterior 18mm thick confirming to IS in baverian beach shade as per drg . |
| 40 | Supply and fix suitable PVC shoes of superior quality . |
| 41 | All as per item No 1.00 here-in -before but CHAIR COMPUTER, FD/E6/MAP/01, TP |
| 42 | Removing unserviceable damaged Seat & back of Chair computer, supply and fixing of 12 mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all round. The polyurethane foam shall be 50 mm thick and shall be moulded with density 50-55 Kg per cubic Mtr on Hampden machine ,all as directed and specified by Engr -in -charge |
| 43 | Removing old unserviceable arm rest of chair computer and S&F new one made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed by Engr -in –charge. |
| 44 | Removing unserviceable castor twin wheels and S&F new superior quality castor twin wheel suitable for chair computer all as directed |
| 45 | Removing unserviceable Base and S&F new Base suitable for chair computer all as directed |
| 46 | Removing unserviceable adjustable Hydrolic system and S&F new adjustable Hydrolic system suitable for chair computer all as specified and directed by Engr -in charge. |
| 47 | Removing of old unsv tapestry cloth and supply and fixs new crape cloth (rate should not be less than INR 220/- per RM) as apporoved and directed by in Engr charge. |
| 48 | All as per item No 1.00 here-in -before but CHAIR REVOLVING EXECUTIVE(LOW AND HIGH BACK)/CHAIR CONFERENCE TP MAKE GEEKAEN/E S C/GODREJ/ETC & FD/E6/MAP/01 |
| 49 | Removing of old fabric and pressed molded polyurethane foam cushion from seat and back of chair revolving executive after carefully removing the PVC lipping from the edges of the seat and back of the chair, Supply and fixing new moulded polyurethane foam cushion 50mm thick and fabric over the seat and back of the chair as per the existing shape of the chair duly providing new PVC lipping all-round the edges of seat and back of the chair complete all as specified and all as directed by Engr-in- Charge. |
| 50 | Removing the old unserviceable arm of the chair revolving executive by unscrewing the bolt from the inner side, Supply and fixing new arm to the chair revolving executive of the same shape and size as of existing one. The arm shall be of black integral skin polyurethane reinforced with MS insert, it shall be scratch and weather resistant. |
| 51 | Removing the old unserviceable complete pedestal assembly along with hydraulic system of chair revolving executive by removing the pin from bottom carefully without damaging the upper portion. Supply and fixing new pedestal assembly along with hydraulic system of chair revolving executive with standard workmanship .The pedestal assembly shall consists of two wheel coasters for smooth running of chairs and shall have gas lift mechanism complete all as specified and all as directed by Engr-in- Charge. |
| 52 | Removing of old unsv tapestry cloth and supply and fixs new cloth (rate should not be less than INR 120/- per RM) as apporoved and directed by in Engr charge. |
| 53 | Removing unserviceable castor twin wheels and S&F new castor twin wheel suitable for chair computer all as directed. |
| 54 | All as per item No 1.00 here-in -before but TABLE COMPUTER, FD/E6/MAP/03,TP |
| 55 | Key Board of table computer pre-laminated MDF board exterior grade |
| 56 | Material and labour for removing of unserviceable table top, making to size fixing new top of required size 18-19 mm pre-laminated MDF board exterior grade in colour/shade as existing shade. (Make Action tesa, Century, Green panel) |
| 57 | Remove UNSV Telescopic chanel and fixing of New telescopic chanel |
| 58 | Drawer of table with telescopic chanel |
| 59 | Shelves of table |
| 60 | vertical side shelf |
| 61 | Painting with two coats of black synthetic enamel paint to complete table etc. all as specified and directed. |
| 62 | All as per item No 1.00 here-in -before but BED HARD STEEL (FD/E6/MAP/08(R ) |
| 63 | 12 mm BWP as per IS 710 ply placed in position as shown in drg. |
| 64 | Rubber shoes 32mmx32mm of high quality placed in position as shown in drg. |
| 65 | Scratching of scraches/ dentings to powder coated two coats steel surfaces with emery paper ,applying metal putty wherever required and repair with painting duly matched with existing surfaces. |
| 66 | Head Rest as per drg (pre-laminated MDF board exterior) |
| 67 | Foot Rest as per Drg (pre-laminated MDF board exterior) |
| 68 | All as per item No 1.00 here-in -before but CHARPOY GI PIPE,FD-220:- |
| 69 | Taking out existing unserviceable plywood from charpoy, dismantling the unserviceable parts like GI elbow, GI check nuts, GI pipe and tightening the same with new parts (supplied in succeding items in schedule), supply and fixing of plywood 12mm thick 5 ply of size 1.98x0.93mtr BWP Grade ISI confirming to relevant IS with 3 Nos stiffnerand 50mmX5mmX930mm fixing with nut and bolt 6mm dia complete along with painting all as specified and directed by Engineer-in-Charge. |
| 70 | Supply only GI 3 way elbow ISI marked of size 32mm bore weight not less than 400 gms each complete all as specified and directed by Engineer-in-Charge. |
| 71 | Supply only GI check nut 6mm thick weight not less than 35 gms each complete all as specifed and directed by Engineer-in-Charge. |
| 72 | Supply only long rail of charpoys GI pipe long rail made out of 32mm bore GI pipe medium grade confirming to IS : 1239 Part-I of length 1.9 mtrs duly threaded one side upto 25mm long at end and other side to 50 mm long at end complete all as specified and directed by Engineer-in-charge. |
| 73 | Converting long rail into short Rail (Obtain from Ser No 07.01 above) making threads 25mm long both side end complete all as specified and directed by Engineer-in-Charge. |
| 74 | Converting short rail into leg (Obtain from Ser No 7.04 above) making threads 25mm long both side end complete all as specified and directed by Engineer-in-Charge. |
| 75 | Supply only MS Flat 920x40x5 mm duly painted black colour after primer coat complete all as specified and directed. |
| 76 | Rubber shoes 32mmx32mm of high quality placed in position as shown in drg. |
| 77 | All as per item No 1.00 here-in -before but TEAPOY VERANDAH,FD/E6/MAP/17 |
| 78 | Material and labour for removing of unserviceable table top, making to size fixing new top of required size 18-19 mm pre-laminated MDF board exterior grade in colour/shade as approved by GE. |
| 79 | 25mmx3mm flat iron on top of legs of length 800mm welded to existing flat iron at top placed in position as shown in drg. |
| 80 | Material and labour for replacement of worn out 10mm dia MS bar wherever required as directed and fixing as shown on drg. (Note :- Welding points shall be measured and paid separetly). |
| 81 | MIG welding of broken joints MS members For table . |
| 82 | Rubber shoes 18mm square of high quality placed in position as shown in drg. |
| 83 | Material and labour for carrying out minor repairs like denting & gas welding of broken Frame etc and painting with two coats of the White colour synthetic enamel paint to complete table etc complete all as specified and directed. |
| 84 | All as per item No 1. here-in -before but RACK STEEL Adjustable open type ,FD-1038/TP |
| 85 | Back to rack six tiers steel made of 1mm thick MS sheet of size 1905mmx915mm fixed in between vertical angle iron with nut and bolts as shown in drg. |
| 86 | Sides to rack six tiers steel made of 1mm thick MS sheet of size 1905mmx610mm fixed in between vertical angle iron with nut and bolts as shown in drg. |
| 87 | Shelves to rack six tiers steel made of 1mm thick MS sheet of size 915mmx610mm made to shape and fixed in between opposite vertical angle iron with nut and bolts as shown in drg. |
| 88 | One coat of synthetic smoke grey paint on all steel portion of rack complete. |
| 89 | All as per item No 1.00 here-in -before but CHAIR WRITING,FD/E6/MAP/12 FD-280, FD-360 |
| 90 | Removing unserviceable damaged Seat & back of Chair writing. Supply and fixing the seat made of 12 mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all round. The polyurethane foam shall be 50 mm thick and shall be moulded with density 50-55 Kg per cubic mtr on Hampden machine. |
| 91 | Painting the entire frame with two coats of synthetic enamel paint 1st quality including preparation of surface of chair writing officers all as directed by Engr -in -charge. |
| 92 | Removing old unserviceable arm rest of chair writing officer and S&F new arm made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed by Engr -in -charge. |
| 93 | Removing of old unsv tapestry cloth and supply and fixs new crape cloth (rate should not be less than INR 220/- per RM) as apporoved and directed by in Engr charge. |
| 94 | Removing old broken rubber stopper of the chairs and S&F new Rubber stopper at bottom all as directed and specified by Engr -in -charge |
| 95 | All as per item No 1.00 here-in -before but CHAIR VERANDAH:-, FD-,256,359,259 |
| 96 | Spot gas welding to broken parts/joints of chairs. |
| 97 | Removing the existing unserviceable cane plastic from the chair and Recanning the chair with plastic cane 3.5mm to 4mm wide, white colour, (MAT Pattern),half round, virgin quality as approved by Engr-in-Charge. |
| 98 | Removing the existing unserviceable PVC seat from the chair and supply and fixing PVC seat 4mm thick. Due care shall be taken while fixing the PVC seat, The PVC seat shall get approved from BSO and GE before supply. |
| 99 | Best quality new PVC shoes to the legs of chair. |
| 100 | Painting the frame of the chairs by two coats of synthetic enamel white of approved quality. |
| 101 | All as per item No 1.00 here-in -before but Shoe Rack Steel FD/E6/MAP/02R :- |
| 102 | Continuous Gas welding as required . |
| 103 | Hard rubber shoes as per drg |
| 104 | Painting to steel shoe rack with synthetic enamel paint two coats of existing colour after prepration of surfaces. |
| 105 | All asper Item No 1.00 here -in- before but SOFA single seater/ two seater /three seater chrome plated arms and legs (TP) MAKE GEEKAEN / E S C / GODREJ / ETC |
| 106 | Continuous Gas welding as required . |
| 107 | Taking out old pressed /torn old cushions fron sofa single seater of Supply 40 density thick foam cushion duly covered with good quality leatherite /suede tapestry all over(Not less than Rs 300 per metre)cloth of approved color and shade by GE. |
| 108 | Taking out old pressed /torn old cushions fron sofa two seater Supply 40 density thick foam cushion duly covered with good quality leatherite /suede tapestry all over(Not less than Rs 300 per metre)cloth of approved color and shade by GE. |
| 109 | Taking out old pressed /torn old cushions fron sofa three seater Supply 40 density thick foam cushion duly covered with good quality leatherite suede tapestry all over(Not less than Rs 300 per metre)cloth of approved color and shade by GE. |
| 110 | Professional dry cleaning of leather cover/foam cushions of sofa single/ two/ three seater to remove surface dust, stain, odors and refresh the fabric. All as specified and directed by Engr-In-charge |
| 111 | All as per item No 1.00 here-in -before but LOCKER BED SIDE STEEL ,FD-127(M)/257/1029 |
| 112 | All as per item No 1.05 above but locks (6 levers ) of make link or Harrison approved by GE. |
| 113 | All as per item No 1.05 above but CP handle with bolt. |
| 114 | Material and labour for removing unserviceable shutter and providing new shutter using MS sheet 1.00mm thick as per existing shape of locker steel complete all as specified and directed. |
| 115 | Removing of unserviceable and worn out legs and providing new legs made out of 1.00mm thick MS sheet fabricated to shape as per existing locker steel complete all as specified and directed. |
| 116 | Removing of unserviceable shelves and providing new shelves made out of MS sheet 1.00mm thick with fixing brackets of existing type locker steel complete all as specified and directed. |
| 117 | Scratching of scracheds/dentings to powde coated steel surface with emery paper, applying metel putty wherever required and repair inside/out side with painting duty matched with existing surfaces |
| 118 | Scratching of scracheds/dentings to powde coated steel surface with emery paper, applying metel putty wherever required and repair inside side only with painting duty matched with existing surfaces |
| 119 | Scratching of scracheds/dentings to powde coated steel surface with emery paper, applying metel putty wherever required and repair out side only with painting duty matched with existing surfaces |
| 120 | All as per item No 1.00 here-in -before but TABLE OFFICE CLERK STEEL: FD-84, 381, 1003 & 1004. |
| 121 | Legs of MS Square tube of size 25mmx25mmx760mm of 20 Gauge as per drg. |
| 122 | Removing of unserviceable lock and supplying and fixing new lock 32 to 55 mm size with duplicate keys and necessary screws etc make link or Harrison approved by GE. |
| 123 | Supply and fixing new drawer made out of 1mm thick MS Sheet alongwith PVC recessed handle as approved including taking down old drawer. |
| 124 | Supply and fix suitable PVC shoes of superior quality for legs for table office cleark steel. |
| 125 | Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm pre-laminated MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. |
| 126 | Replacement of worn out conduct MS 25 mm Sq pipe 16 gauge whrerever required as directed and fixing as shown on drg . (welding points shall be measured and paid separately. |
| 127 | Carrying out minor repairs like denting & gas welding of broken drawers etc and spray painting with one coats of the green colour synthetic enamel paint to complete (External & enternal ) table etc all completed. |
| 128 | All as per item No 1.00 here-in -before but TABLE OFFICE OFFICER STEEL: FD-84/ 1002/1003. |
| 129 | Legs of MS Square tube of size 25mmx25mmx760mm of 20 Gauge as per drg |
| 130 | Material and labour for removing of unserviceable lock and supplying and fixing new lock 32 to 55mm size with duplicate keys and necessary screws etc (lock should be ISI marked). |
| 131 | Supply and fixing new drawer made out of 1mm thick MS Sheet alongwith PVC recessed handle as approved including taking down old drawer. |
| 132 | Stiffeners as per drg |
| 133 | Supply and fix suitable PVC shoes of superior quality for legs for table office officer steel. |
| 134 | Supply and fix in replacement shutter made out of 1.00mm thick MS sheet made to shape as per drg. |
| 135 | Material and labour for replacement of worn out conduit MS 25mm Sq pipe 16 gauge wherever required as directed and fixing as shown on drg.( Note - welding points shall be measured and paid separetly). |
| 136 | Material and labour for MIG welding of broken joints MS members (square / tubular ) for MS conduit 25 Sq mm square pipe. |
| 137 | Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm exterior MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. |
| 138 | Material and labour for carrying out minor repairs like denting & gas welding of broken drawers etc and spray painting with one coats of the green colour synthetic enamel paint to complete (External & enternal ) table etc all completed. |
| 139 | All as per item No 1.00 here-in -before but BOOK CASE STEEL- FD-1028,69 (M),45/337 |
| 140 | Applying one coat of synthetic enamel paint olive green including preparation of old painted surfaces after necessary denting to Book case steel shown on drg (FD-1028) complete. |
| 141 | Lock 4/5 levers godrej pattern, including two keys and including removing of unserviceable lock from Book case steel shown on drg (FD-1028) complete. |
| 142 | Handle steel chromium plated size- 100mm long including removing of unserviceable handle steel from Book case steel shown on drg (FD-1028) complete. |
| 143 | Glass pane 3mm thick including removing of unserviceable/broken glass pane from Book case steel shown on drg (FD-1028) complete. |
| 144 | All as per item No 1. here-in -before but RACK Universal SS 2150x1300x400mm,Stainless steel grade 304 galvomnized shelf rack with 5 shelf |
| 145 | Back to rack Univeral SS steel made of 1mm thick MS sheet of size 1905mmx915mm fixed in between vertical angle iron with nut and bolts as shown in drg. |
| 146 | Sides to rack Univeral SS steel made of 1mm thick MS sheet of size 1905mmx610mm fixed in between vertical angle iron with nut and bolts as shown in drg. |
| 147 | Shelves to rack Univeral SS steel made of 1mm thick MS sheet of size 915mmx610mm made to shape and fixed in between opposite vertical angle iron with nut and bolts as shown in drg. |
| 148 | One coat of synthetic smoke grey paint on all steel portion of rack complete. |
| 149 | All as per item No 1. here-in -before but CHAIR VISITOR ,TP. |
| 150 | Removing unserviceable damaged Seat & back of Chair visitor. Supply and fixing the seat made of 12 mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all round. The polyurethane foam shall be 50 mm thick and shall be moulded with density 50-55 Kg per cubic mtr on Hampden machine. |
| 151 | Painting the entire frame with one coat of synthetic enamel paint 1st quality including preparation of surface of chair writing officers including handle all as directed by Engr -in -charge. |
| 152 | Removing old unserviceable arm rest of chair writing officer and S&F new arm made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed by Engr -in -charge. |
| 153 | Removing of old unsv tapestry cloth and supply and fixs new cloth (rate should not be less than INR 120/- per RM) as apporoved and directed by in Engr charge. |
| 154 | Removing old broken rubber stopper of the chairs and S&F new Rubber stopper at bottom all as directed and specified by Engr -in -charge |
| 155 | All as per item No 1.00 here-in -before but CHAIR STEEL TUBULAR WITH ARMS :FD-75(M) |
| 156 | Scratching the entire frame of chair and applying desired coat of synthetic enamel olive green/steel grey paint after preparation of surfaces. Complete all as specified and as directed by Engr-in-Charge. |
| 157 | 02 nos of MS flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat. supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with nut bolts and washers and screws to fix two flats placed beneath the seat complete all as specified and all as directed by Engr-in- Charge. |
| 158 | Removing the old unserviceable back from the frame of the chair. Supply and fixing new back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with nut bolts and washers. |
| 159 | Second class Hard wood Arm rest as per drg |
| 160 | Hard rubber shoes as per drg |
| 161 | Rubber cap for conduit pipe as per drg |
| 162 | Note :- The amount of Rs 28742.50 against Schedule of Credit on Srl Page 114 & 115 shall be deducted from the total amount quoted against Sch 'A' Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender