Tender For Provision For Network Improvement With Installation Of Isolation Valve, Interconnection Work, Dedicated Header Lines And Manifold Arrangements With Automation And Instrumentation Work At Maitribihar, Bhubaneswar
Tender Value
76.72 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
11 days left
EMD
77000
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision For Network Improvement With Installation Of Isolation Valve, Interconnection Work, Dedicated Header Lines And Manifold Arrangements With Automation And Instrumentation Work At Maitribihar, Bhubaneswar
BOQ
| Sl. No. | Item Description |
| 1 | Cutting asphalt or bituminous road of flexible pavments and disposal of dismantalled materials up a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of all labour, T & P etc. all complete as per the direction of engineer-in-charge. |
| 2 | Earth work in all kinds of soil within 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per the direction of the Engineer-in-charge. |
| 3 | Supplying filling in foundation & plinth with sand well watered & rammed including cost, conveyance, royalties, taxes all labour, T & P etc all complete as per specification and direction of Engineer-in-charge. |
| 4 | Supplying all materials, labour and T & P for Cement concrete (1:2:4) with 12mm size crusher broken hard granite chips including cost of all labour, materials with all taxes, lead, T & P etc all complete and as per direction of Engineer -in- Charge. |
| 5 | Filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-in-charge. |
| 6 | Supplying all Labour and T&P For Cutting of C.I /DI pipe by eletric arc welding,at site including cost of materials,labour,T & P etc all complete. |
| 7 | Laying in trenches Centrifugally Cast (Spun) Ductile Iron pressure, socket and spigot pipes Class K7 without cement mortar lining conforming to IS:8329 - 2000 of the following nominal diameter as per specification complete. (Earthwork in trenches, jointing of pipes, specials and fittings to be measured and paid for separately) including cost of pipe |
| 8 | 150 mm dia K-7 pipe |
| 9 | 200 mm dia K-7 pipe (Pipe will supplied by department) |
| 10 | Supplying all materials, labour and T&P for Providing Push-on-joints confirming to IS:3114 to centrifugally (Spun) Cast Iron Pipes or Ductile Iron pipes using rubber gasket conforming to IS:5382 of Styrene Butadene Rubber (S.B.R) quality , testing of joints,etc. all complete as per specification and direction of Engineer-in-Charge including supplying of all labour, material, tools & plants required to perform the work. |
| 11 | 150 mm dia K-7 pipe |
| 12 | 200 mm dia |
| 13 | Laying in trenches C.I./D.I specials conforming to I.S.-1538 of the following diameter as per P.H. specifications including carriage of materials from store to work site etc complete.(excluding earth work in excavation,jointing and cost of specials) |
| 14 | Assuming the qnty of specials @ 3 % on weight of DI pipe |
| 15 | Supplying all material , labour T & P for Providing, fixing of CI mechanical joint socket conforming to IS:13382/92 to flanged ends of Cast Iron Pipes or Ductile Iron Pipes including testing of joints as per specification complete. |
| 16 | 150 MM Dia MJ STP |
| 17 | 200 MM Dia MJ STP |
| 18 | 600 MM Dia MJ STP |
| 19 | Supplying all labour and T&P for providing and laying MS pipe and specials confirming to IS 3589/99 of quality grade FE 410 of following nominal dia and including transportation of pipes and fitting to site etc all complete as per the direction of E.I.C. |
| 20 | 100mm dia pipe (4.5 mm) |
| 21 | 150mm dia pipe(4.5 mm ) |
| 22 | 200 mm dia MS Pipe (4.5 mm) |
| 23 | 300 mm dia MS Pipe (4.5 mm) |
| 24 | 100mm dia M.S Flange (10mm thick) |
| 25 | 150mm dia M.S Flange X 12mm thick |
| 26 | 200mm dia M.S Flange X 12 mm thick |
| 27 | 300mm dia M.S Flange X 12 mm thick |
| 28 | 600mm dia M.S X 20mm thick |
| 29 | 150mm dia M.S Blank Flange |
| 30 | 300mm dia M.S Blank Flange |
| 31 | 100mm dia x90* Bend (.30 mtr long) |
| 32 | 150mm dia x90* Bend (.45 mtr long) |
| 33 | 200mm dia x90* Bend (.45 mtr long) |
| 34 | 150mm dia x45* Bend (.25mtr long) |
| 35 | 600x200x600 mm MS TEE |
| 36 | 200x200x200 mm MS TEE |
| 37 | 300x300x300 mm MS TEE (1.00 mtr long) |
| 38 | 300mm MS 90* Plain Bend(0.60mtr) |
| 39 | 300mm MS 45* Plain Bend(0.45mtr) |
| 40 | Supplying all material and labour and T&P for Providing flanged joints conforming to IS:3114-1994 to flanged Cast Iron pipes and fittings of the following nominal diameters including testing of joints, cost of bolts and nuts and rubber insertions as per specification complete . |
| 41 | 100mm dia flange joints |
| 42 | 300mm dia flange joints |
| 43 | 200mm flange joints |
| 44 | 150mm flange joints |
| 45 | 600mm flange joints |
| 46 | Supplying all labour and T&P for making hole in the MS pipe & welding of MS/GI socket for fixing of pressure Gauge & air valve in proper position all complete as per direction of EIC. |
| 47 | Supplying all material labour T & P for fixing of Fixing single Air Relief Valve conforming to IS 14845 : 2000 for water works purposes for the following diameters including drilling the water main (Cast Iron pipes with metal straps) as per specification complete. |
| 48 | 25 mm Dia Air Valve |
| 49 | Supplying all material and labour and T&P for Flame cutting and facing of MS plate or pipes 8mm to 10mm thick including supply of all labor, material, tools & plants for following plate thickness all complete as per specification and direction of Engineer-in-Charge. |
| 50 | Supplying all material and labour and T&P for Providing joints by welding with two welding beads/pass, conforming to IS:816-1998 (Single 60° Butt weld) to MS pipes and fittings at site by using welding generator including testing of joints, as per specification of Engineer-in-Charge. |
| 51 | Supplying all labour , T&P and removing surplus earth by mechanical means within 5 K.M radious etc all complete and only to be dumped/ disposed off at designated site as per direction of Engineer in charge. |
| 52 | Supply all labour , Material ,Labour T & P for Fitting fixing of M.s Angle ,Flat with Wire mesh. |
| 53 | Flat (30 x 5) |
| 54 | Wiremesh |
| 55 | Supplying all labour and material and T&P for Enamel Painting two coats with any approved paint including cost of all labour, materials T & P with taxes, transportation etc all complete . |
| 56 | Supplying all labour and tools and plants for Dismantling of RCC walls by means of core cutting of 150mm dia to avoid further damage to adjacent concrete and reinfcorement so that the reinforcement can be rewelded properly by chiselling with electric breaker weighing up to 7.50Kg with capacity of 20 joules impact to concrete at least leaving a weldable length that core should be taken to size they cut slabs to size so that can easily be removed from site by head load or by chain hauled from inside all complete |
| 57 | Supplying all materials labour & T & P for making water proof Micro Concrete of any reputed brand (Preferable Perma Polycrete) for R.C.C. works including hoisting and laying etc. complete as per direction of Engineer in charge. |
| 58 | Supplying all labour, materials. T&P for applying 12mm thick polymer modified cement plaster (1:3) mixed with an acrylic polymer based water proofing compound @ 125 ml / 50 kg of cement over old new bonding agent including all cost, conveyance. royalities & taxes etc. all complete as per specification and direction of Engineer-in-Charge. |
| 59 | Supplying, Fitting,Commissioning,Fixing double chamber control valve solonied control,hydraulic operated for operating pressure 1.0-2.0 Kg/cm2 Body A216 WCB integrated with PLC pannel for operation (local/remort and web enabled with command and control ) at ESR of make Bermad-700/ CLA/DOROT S-300/AVK /Singer to control water supply including the cost of valve cutting the pipeline & making good to the damages including cost of all labours, T&P etc. all complete as per the direction of Engineer-in-charge. |
| 60 | 150mm dia flow control valve |
| 61 | 200mm dia flow control valve |
| 62 | Supply & installation of full-bore type electromagnetic water flow meter at various locations for monitoring volume of water flow, with following technical specification: Drinking Water Application, Liner:- Hard rubber, Process Connection:- PN10, St37-2/FE 410W B, flange EN1092, Electrodes:- 1.4435/3161, Calibration: 0.5%, Approval: Nonhazardous area Housing Field Alu, Sensor IP68 NEMA6P, Cable, Remote Version: 20 m coll and signal cable, Power Supply: 20-28VDC /11-40VDC Display: 2-line, push buttons, Make- KROHNE MARSHALL, E&H, ADEPT, ABB, SIEMENS |
| 63 | 150mm dia flow Meter |
| 64 | 200mm dia flow meter |
| 65 | Supplying all materials Labour & T & P for Fixing Ductile Iron non-rising spindle type metal seated IS 5312 part-1-PN-1.6 150mm - 38887.80 Sluice Valve conforming to IS specification for the following nominal diameters as per specification complete including cost of Sluice valve . |
| 66 | 150mm dia D/F Sluice Valve (PN1.6) VAG /TALIS or equivalent make (Near UGR) |
| 67 | 200 dia D/F Sluice Valve (PN1.6) VAG /TALIS or equivalent make |
| 68 | Supplying all material and labour and T&P for Providing SS 304 Bellow with zinc plated flanges MS tie rods. |
| 69 | 150mm dia |
| 70 | 200mm dia |
| 71 | Supplying all labour T&P materials for fitting & Fixing of Pressure meter with ss body & glycerin type with snubber , pipeing & needle valve at ESR as well as different lane & sub-lane to know the water pressure including the cost of pressure meter with drilling holes in pipe line & making good to the damages at including cost all the labours T&P etc all complete as per the direction of Engineer-in-charges. 0 to 10kg/sqmm pressure meter. -150mm dia (Make-H Guru /Boumer India/General Instruments Consortium) |
| 72 | Supply, installation & commissioning of PLC Panel with following technical specification i,e. Enclosure: 800x800x2100mm-01 No with double door & lock, CPU should have 1 MB program memory with extended memory slut,Redundand-24VDC, SMPS 10Amp along with 24V DC SPD,IO count as DI-16,DO-20,AI-20,AQ-08 & MODBUS-10 subsystem shall be of same series as CPU, 10\\" Panel Mounted HMI, Modem should have support MQTT Protocol by default, 24volt DC Industrial switch with minimum 6 etherate, 4 SFP Port each Al shall be equipped with suitable signal isolator of 20 Nos & surge protection device 20 nos LIU Isolator, 230Volt AC/230volt AC toroidal transformer, 1KVA 230V AC industrial grade UPS of 8 hrs backup to charge 3 nos 12 VDC 65 AH Battery ,DP MCB of Adequate current capacity, LED tube light 10\\" 5 watt, door limit switch, Fan 6\\" with louver,4 sum straight through terminal & fuse terminal 90 nos ,with PE & EE. The Approved Make: (PLC-Siemens, Schnider, Phoenix, ABB, Mitsubishi SMPS -Phoenix, Siemens, Schnider. Isolater-Masibus, Rishabh, Multiplan. SPD Phoenix, Mersen, Dehn UPS-Vertiv, Hitachi, High Rail, AVO, Eathernateswitch-Siemense, Moxa, Phoenix) including cost of material with all taxes transportation to Site/Storage with insurance. Programme to be handed over with upload & download facilities for departmental use. |
| 73 | Supply, Installation, Testing and commissioning of Chlorine Dosing machine incluiding laying of pvc pipe interconnection with main waterline, Chemical storage and handling equipment etc. 0-500 Lph Zeroleakge pneumatic diapharm dosing pump - 2nos, one primary and one standby mode, pressure upto-10bar, 1000 Ltr Chemical tank capacity. Agitator motor - 1nos, strainer, NRV on Pump Outlet, Electrically actute Flow control Valve with PLC compatible VFD Panel for dosing pump and agitator etc. transportation & packaging including cost of materials, all labours, T&P etc. all complete as per the direction of Engineer-in-charge. |
| 74 | HDPE PIPE: Supply and Laying of 50MM dia HDPE pipe (Make: Supreme/equvalent) in cable trench as per specification and directions of Site Engineer / Engineer-in-Charge. |
| 75 | Inverter Split AC 1.5 T0n 3 Star With installation |
| 76 | Supply,Installation & Commissioning of SCADA software (Make-Schiender/Simens) with Graphical processor visualisation Advanced alaram management,historical and Real time trending,Built-in-reporting,Stastical process control,Multithreaded citect VBA and Cicode programming language with 2048 Tag SCADA Software (ES+OS) (Make- Schneider, Siemens),1KVa online Ups with 30Min batery backup- 1Nos,CPU Having Preloaded win-10 Proffessional, I3-10gen 2.4 Ghz Prrocessor, DDR4 8gb Ram, 500 gb 7200 Rpm HDD-1 Nos ( Make- HP,DELL,LENOVO),USB based keyboard - 1Nos,USB based Optical Mouse- 1Nos,43'' LED monitor - 1Nos,A4 size laserPrinter - 1Nos,Wooden Computer table - 1 Nos ,Preparation of P&I diagram, Creation of Multi visualization screen for Process control,alarm managenent, Historical and realtime process trend, Daily reporting etc complete as per requirement & direction of Engineer - in - Charge (Including license key) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender