Tender For Construction Of Seed Testing Laboratory At Sm Farm Kurbathang Under Centrally Sponsored Scheme (Css) Component Of Rkvy
Tender Value
2.07 Crore
Estimated cost
Bid Submission
05 Sep 2026
11 days left
EMD
4.14 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kargil → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Seed Testing Laboratory At Sm Farm Kurbathang Under Centrally Sponsored Scheme (Css) Component Of Rkvy
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: as directed by Engineer-in-charge |
| 2 | ORDINARY ROCK @30% |
| 3 | ALL KIND OF SOIL @70% |
| 4 | Filling available excavated earth (excluding rock) in trenches plinth, sides of foundation etc in layer not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, lead upto 50cm and lead up to 50 m and lift upto 1.5 mtr. |
| 5 | Disposal of excavated earth as directed, within alead of 4 km : as directed by Engineer-in-charge |
| 6 | STONE SOLLING Dumping of stone includingcost of stone (in horizontal on level) |
| 7 | Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 20mm nominal size) (crushed) |
| 8 | Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) (crushed) |
| 9 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stoneaggregate 20 mm nominal size) |
| 10 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stoneaggregate 20 mm nominal size) |
| 11 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominalsize) |
| 12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D ormore. |
| 13 | CENTERING AND SHUTTERING |
| 14 | Centering and shuttering including strutting, propping etc. and removal of form for:Foundation, footing bases of column |
| 15 | Centering and shuttering including strutting, propping etc. and removal of form for: Columns,pillars, piers, abutments, posts and struts. |
| 16 | Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers andcantilevers. |
| 17 | Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and accessplatform. |
| 18 | Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand ).The rate includes providing and placing in position2 Nos 6 mm dia M.S. bars at every third course of masonry work. |
| 19 | Providing and fixing up to floor five level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement: 3 coarse sand), cost of required centering, shuttering complete :1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3graded stone aggregate 20 mm nominal size). |
| 20 | WOOD WORK |
| 21 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid forseperately) Second class Kail wood |
| 22 | Providing and fixing panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for seperately,all complete as per direction of Engineer-in-charge.(second class Kail wood 35 mm thickshutter) |
| 23 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40mm thick.Second Class Kail wood |
| 24 | TOUGHENED SGU glass panes of 4 mm thickness SAINT GOBAIN / ASAHI INDIA GLASS / HNGIL make as approved by engineer in chargeQty vide window openings @80% |
| 25 | Glass panes of 4 mm thickness SAINT GOBAIN/ ASAHI INDIA GLASS / HNGIL make asapproved by engineer in charge Qty vide window openings @80% |
| 26 | Providing and fixing accessories of standard andquality make of approved manufacturer including all necessary fixtures required. |
| 27 | L-Drops for room door |
| 28 | T-Bolts for Doors |
| 29 | T-Bolts for Windows |
| 30 | Handles for door |
| 31 | Handels for window |
| 32 | FINISHING WORK |
| 33 | Pebble dash plaster upto 10m height above ground level with a mixture of washed pebble or crushed stone 6mm to 12.5mm nominal size dashed over and including fresh plaster in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 Coarse sand) and top layer 10mm cement plaster with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. |
| 34 | CEMENT PLASTER (IN COARSE SAND) 12mmCement plaster of mix 1 : 4 ( 1 cement : 4 coarse sand) |
| 35 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface toprepare the surface even and smooth complete. |
| 36 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer(Black Paint to be used for Trombe Wall) |
| 37 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) withsilicon additives. |
| 38 | New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat ofexterior primer applied @ 0.90 litre/10 sqm. |
| 39 | Applying priming coat: With ready mixed pink orgrey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 40 | Qty. vide Door Opening @ 1.25 |
| 41 | Preparing newly primed wooden surface for painting by way of filling of putty sand paperingrubbing complete. |
| 42 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 43 | Providing & Fixing finished brass hanging typefloor door stopper with necessary screws etc complete. |
| 44 | THERMAL INSULATION |
| 45 | Providing wood work in frames of walls,false ceiling, partitions etc. sawn and fixed in position:Budloo / Fir wood |
| 46 | Cement concrete flooring1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate) finished 50 mm thick with 20 mm nominal size stone aggregate |
| 47 | Providing and fixing 12mm thick wooden laminated flooring of AC 4 and above including therma cool and cornice complete complete job as per engineer in charge. |
| 48 | Providing and fixing 12 mm thick tongued and grooved Pine wood (Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celing includining all necessary fixtures including cornice with necessary screws, priming coat on exposedsurface etc., complete. Brand - Rait Wood |
| 49 | Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer and sand papering rubbing and applying hard polish,glossy polish in sequance over the preparedsurface complete job |
| 50 | Providing and fixing thermal insulation with specified wool and density conforming to IS: 8183, 50 mm thick, wrapped in 200G Virgin Polythene bags fixed to walls with screws, rawl plugs and washers and held in position by criss-crossing GI wire etc. complete as per directions of Engineer-in-charge. |
| 51 | With resin bonded rock wool with density 48 kg/cum |
| 52 | Providing and laying roof insulation with 40 mmthick impervious sprayed, closed cell free Rigid Polyurethane foam over deck insulation conforming to IS - 12432 Pt. III (density of foam being 40-45 kg/cum), over a coat of polyurethane primer applied @ 6-8 sqm per liter, laying 400 G polythene sheet over PUF spray and providing a wearing course of 40mm thick cement screed 1: 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) in chequered rough finish, in panels of 2.5 m x2.5 m and embedding with 24 G wire netting and sealing the jointswith polymerized mastic, allcomplete as per direction of Engineer-in Charge. |
| 53 | FLOORING |
| 54 | MARBLE STONE FLOORINGFlooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing completewith: |
| 55 | Agaria White 18mm |
| 56 | Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete i.e Size of tile 600x600 mm |
| 57 | P/F 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in colours, shades except burgundy bottle green, black of any size as approved by engineer-in-charge in Skirting, risers of steps, and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 course sand) and jointing with grey cement slurry @3.3kg/sqm including pointing the joint with white cement and matching pigments etc., complete. |
| 58 | Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) \\"manually controled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls andfloors wherever required. |
| 59 | Orissa pattern white vitreous china W.C. pan of size 580x440 mm with integral type foot rests.JAGUAR/CERA Make |
| 60 | Providing and fixing toilet paper holder :C.P. brass |
| 61 | Providing and fixing wash basin with C.I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making goodthe walls wherever required: |
| 62 | White Vitreous China Flat back wash basin size550x400 mm with single 15 mm C.P. brass pillar tap. |
| 63 | Providing and fixing Stainless Steel AISI304 (18/8)kitchen sink as per IS13983 with C.I.brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required:510x1040 mm bowl depth200mm. |
| 64 | Providing and fixing Flexible (coil shaped) PVC waste pipe for ( wash basin & kitchen sink ) 40 mm dia with length not less than 700 mm i/c PVC wastefittings |
| 65 | 15 mm C.P. brass 2 in 1tap |
| 66 | 15 mm C.P. brass tap |
| 67 | C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction ofEngineer-incharge. |
| 68 | Providing and fixing bidding jali hole |
| 69 | Providing and fixing Wall mount Liquid SoapDispenser of approved brand |
| 70 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Ovalshape 450x350mm (outer dimensions) |
| 71 | Providing and fixing of angle valve for wash basin& flush |
| 72 | Providing and fixing of connection pipe for washbasin,geyser & flush |
| 73 | Providing and installation of PUF (Puf Insulated Tanks) water tank capacity 1000 ltrs of approved brand (SYNTEX OR ANY OTHER APPROVEDBRAND) as per direction engineer incharge |
| 74 | WASTE & VENT PIPE |
| 75 | Providing and fixing soil waste & vent pipe |
| 76 | PVC Pipe. 110mm dia (10 feet unit Length) |
| 77 | PVC Pipe. 75mm dia (10 feet unit Length) |
| 78 | PVC Bend 110mm dia |
| 79 | PVC Bend 75mm dia |
| 80 | PVC Tee 110mm dia |
| 81 | PVC Tee 75mm dia |
| 82 | PVC Collar 110mm dia |
| 83 | PVC Collar 75mm dia |
| 84 | PVC trap 110mm dia |
| 85 | PVC trap 75mm dia |
| 86 | PVC Socket 110mm dia |
| 87 | PVC Socket 75mm dia |
| 88 | PVC door junction 110mm dia |
| 89 | PVC door junction 75mm dia |
| 90 | Providing and fixing 3 layer Thermex Pipe PP-R(Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. |
| 91 | PN-16 pipe , 25mm OD(SDR-7.4) |
| 92 | PN-16 pipe , 32mm OD(SDR-7.4) |
| 93 | PPR Union 32mm |
| 94 | Supply and installation of High Quality self regulating heat tracer for Specialized Heating Solutions for Winterisation of water pipeline including all accessories complete including Supply and installation of Circuit Control Panel with RCBO MCB ,THERMOSTAT (0-120) DEGC, power connector-two way-6 sq.mm, w.p. splice connector,w.p. tee connector,end seal,mounting kit-w.p. jb,g.i. pipe strap 4\\",al. adhesive tape roll ( 50 mm w x 20 m l),f.g. adhesive tape roll (DANFOSSMake OR CHROMALOX any other approved brand as per the direction of Engineer-In-Charge) |
| 95 | Supplying and fixing High Quality 32mm Thick Nitrile Insulation Tube for water pipeline of approved brand 2 Inch Size (Armaflex Class-o Armacell) including alumunium duct clading of approved quality and finish as per the direction ofengineer in charge |
| 96 | Provision for providing and fixing ornamental Shingstak (Ladakhi wood carving over exterior Windows and main entrance door) (Design as per the direction of Engineer-In-charge.) including polishing all complete |
| 97 | Design Supply and installation/Fixing staircase railling of stainless steel (Grade 304) railing(Top Handrail Dia > 50mm , two number intermediate Horizontal tubes Dia >25mm and Rectangular Two Pair Balusters Dia >38mm @1000mm C/C) made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) including fixing the railing with necessary accessories , newal post , balusters and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, necessary screws/fixtures complete job as approved by engineer incharge (Note : No additional payment shall be made to master pillar/Newal Post ) |
| 98 | Supply and installation of Reflective Bubble Aluminum Foil Insulation / Aluminium Silver Bubble Sheet 210 GSM (7 mm) Thick Light Weight Reflective Insulation , Max Withstanding Temperature -40 degree To +110 DegreeWaterproof insulation all complete |
| 99 | Supply and installation of electrical Underfloor heating mats for floor heating systems non-corrosive, flexible heating elements including cables, pre formed cable mats including smart thermostat and digital electrical control panel all complete (STIEBEL ELTRON / DANFOSS Or anyother approved brand |
| 100 | Providing and fixing precoated galvanized iron profile sheets (size, shapeand pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required |
| 101 | Providing hoisting and fixing trusses/purlins/rafters/posts/ postplates/ wooden plank or like components including cost of screws etc. complete.First class Budloo/Fir wood. |
| 102 | Providing and fixing eves boarding, wheather boarding of MS sheet 5mm thick GI Sheet including cutting hoisting fixing in position and applying a priming/painting all work complete job includinglaunching of truss. |
| 103 | Earth work in excavation by mechanical means (Hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. |
| 104 | ORDINARY ROCK @25% |
| 105 | ALL KIND OF SOIL @75% |
| 106 | Filling available excavated earth (excluding rock) in trenches plinth, sides of foundation etc in layer not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, lead upto 50cm and lead up to 50 m and lift upto 1.5 mtr. |
| 107 | Disposal of excavated earth as directed, within a lead of 4km : as directed by Engineer-in-charge |
| 108 | STONE SOLLING Dumping of stone including cost of stone (inhorizontal on level) |
| 109 | Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work uptoplinth level |
| 110 | 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derivedfrom natural sources) |
| 111 | 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from naturalsources) |
| 112 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 113 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe 500D or more. |
| 114 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundation,footing bases of column |
| 115 | Providing and fixing up to floor five level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost ofrequired centering, shuttering complete : |
| 116 | 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) : 3 graded stoneaggregate 20 mmnominal size). |
| 117 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 25mm |
| 118 | Supplying and fixing of GI Concealed Box for Electrical Switches | Galvanized Iron Flush Mount Switch Box | Heavy Duty Rust-Resistant Wall Box Houses light points, fan points, or junctions in RCC Slab all complete job Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender