Tender For Construction Of A.D Office Building At Kargil (By Way Of Balance Work) Under Sdp
Tender Value
24.89 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
3 days left
EMD
49700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kargil → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of A.D Office Building At Kargil (By Way Of Balance Work) Under Sdp
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundation, drains, Pipes, cables etc.(not exceeding 1.5 mtr in width ) and for shafts, wells .cesspits and the like not exceeding 10sqm on plan |
| 2 | All Kind of soil @50% |
| 3 | Ordinary Rock @30% |
| 4 | Hard Rock(Blasting Prohibited) @20% |
| 5 | Providing and laying of soling stone hand packed tightly incld. Cost of stone |
| 6 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 7 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, column, pillars, piers, abutments, posts and struts etc. upy floor five level excluding cost of centering, shuttering, finishing and reinforcement: (1:1.5:3) 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). |
| 8 | Reinforced cement concrete work in Footing , Pedestal,Columns , beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with M20 (1:1.5:3) (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo- Mechanically Treated bars of grade Fe-500D or more. |
| 10 | Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) (crushed) Mud Mate(Use Of Portland Pozzolana Cement Is advised as Per Green Building Guidelines OR 25% replacement of Ordinary Portland cement with fly ash by weight of cement used in structural concrete.) |
| 11 | Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20 mm nominalsize) (Use Of Portland Pozzolana Cement Is advised as Per Green Building Guidelines OR 25% replacement of Ordinary Portland cement with fly ash by weight of cement used in structural concrete.) |
| 12 | Providing wood work in frames of doors, windows, clerestory windows and otherframes, wrought framed and fixed in position with hold fast lugs or with dashfasteners of required dia & length (hold fast lugs or dash fastener shall be paidfor separately) Second class Kail wood |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundation, footing bases of column |
| 14 | Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts. |
| 15 | Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform. |
| 16 | Centering and shuttering including strutting, propping etc. and removal of form for: Edges of slabs and breaks in floors and walls |
| 17 | 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:3 (1 cement: 3 fine sand) |
| 18 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stoneaggregate) finished 50 mm thick with 20 mm nominal size stone aggregate |
| 19 | Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Raj Nagar plain |
| 20 | Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete i.e Size of tile 600x600 mm |
| 21 | P/F 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in colours, shades except burgundy bottle green, black of any size as approved by engineer-in-charge in Skirting, risers of steps, and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 course sand) and jointing with grey cement slurry @3.3kg/sqm including pointing the joint with white cement and matching pigments etc., complete. |
| 22 | Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) \\"manually controled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. |
| 23 | Orissa pattern white vitreous china W.C. pan of size 580x440 mm with integral type footrests. JAGUAR/CERA Make |
| 24 | Providing and fixing wash basin with C.I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: |
| 25 | White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps JAGUAR / CERA/HINDWARE Make |
| 26 | Providing wood work in frames of walls,false ceiling, partitions etc. sawn and fixed in position :Budloo / Fir wood (Note : False Celling Design should be as per engineer incharge which may be of different levelcelling ) |
| 27 | Providing and fixing thermal insulation with specified wool and density conforming to IS: 8183, 50 mm thick, wrapped in 200G Virgin Polythene bags fixed to walls with screws, rawl plugs, and washers and held in position by crisscrossing GI wire, etc. complete as per directions of Engineer-in-charge. With resin bonded rock wool with a density 48 kg/cum |
| 28 | Providing and fixing 12 mm thick tongued and grooved Pine wood (Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celing includining all necessary fixtures including cornice with necessary screws, priming coat on exposedsurface etc., complete. Brand - Rait Wood |
| 29 | Preparing newly prepared panelled surface for polishing by way of filling putty sealer and sand papering rubbing and applying hard polsih glossy polish in sequance over the prepared surface complete job |
| 30 | Providing and fixing in position 18mm thick ply to ply plywood with necessary screw and all job complete |
| 31 | Providing and fixing angle iron post, Hollows tubes, channel, M.S Flat including priming of Red Oxide including carriage welding at Site complete. |
| 32 | Providing and fixing 3 layer Thermex Pipe PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. |
| 33 | PN-16 pipe , 25mm OD(SDR-7.4) |
| 34 | PN-16 pipe , 32mm OD(SDR-7.4) |
| 35 | Supply and fixing of heigh quality Nitrile insulation tube for water pipe line of alapproved brand 2\\" size rock wool of apparent density 128 kg/ m3 on outer side of Nitrile tube of 50 mm thickness including aluminium duct cladding aluminium sheet gauge thickness 0.46 mm to 0.71 mm of approved quality and finished as per direction of engineer in charge (Nitrile Tube 32 mm > rock wool 50 mm > aluminium duct cladding 0.46 mm -0.71 mm. |
| 36 | PN-16 pipe , 25mm OD(SDR-7.4) |
| 37 | PN-16 pipe , 32mm OD(SDR-7.4) |
| 38 | Providing and installation of PUF (Puf Insulated Tanks) water tank capacity 1000 ltrs of approved brand (SYNTEX OR ANY OTHER APPROVEDBRAND) as per direction engineer incharge |
| 39 | PVC Pipe 75mm dia including F-trap, collor, Elbow, tee etc with complete insualtion. |
| 40 | P/Fixing PVC Pipe 100m dia including floor trap, P-trap, collor, Elbow, Tee etc complete insulation all fixture. |
| 41 | P/Fixing 1 H.P Single phase self priming domestic pump electric with made crompton (master plus) including all necessary fittings and fixing testing compelte. |
| 42 | Providing and fixing Sink items of made Hindware, Cera or Equalent company. |
| 43 | Supply and installation of 25 liter Gyser in bathroom |
| 44 | Supply and installation of 10 liter Gyser in Kitchen |
| 45 | Providing and fixing kitchen sink stainless steel of required size and brand, with waste pipe as approved by engineer incharge.(cera, jaguar,hindware etc ) |
| 46 | 16 mm nominal bore of standard back type C.P. brass sink mixer of approved quality and make, weighing not less than 1.970 kg. |
| 47 | Un Plasticized PVC Connection Pipe |
| 48 | Providing and fixing C.P Brass Soap Dish. |
| 49 | Providing and fixing wall mounted wall mixer for kitchen sink of required specificaion and brand as per engineer incharge.(make: cera , kohlar, jagaur) |
| 50 | 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms |
| 51 | P/F of mirrors of superior glass with plastic moulded frame(of approved quality) and of required size and shape. With 6mm thick hard board backing. Rectangular Shape 1500 x 450 mm |
| 52 | 450 mm long towel rail with total length of 495 mm, 78 mm wide and effectiveheight of 88 mm, weighing not less than 170 gms |
| 53 | Providing and fixing panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for seperately,all complete as per direction of Engineer-in-charge.(second class KAIL wood 35 mm thick shutter) |
| 54 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40mm thick.Second Class teak wood |
| 55 | Providing and fixing 5mm thick glass pane including beading complete |
| 56 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2mm thick |
| 57 | Applying one coat of water thinnable cement primer of approved brandand manufacture on wall surface |
| 58 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer (Note: It Should have Low or No VOC as per Green Building guidelines) |
| 59 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 60 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) (Note: It Should have Low or No VOC as per Green Building guidelines) |
| 61 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. (Note: It Should have Low or No VOC as per Green Building guidelines) |
| 62 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar |
| 63 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 64 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead For thickness of tiles above 25 mm and up to 40 mm |
| 65 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness |
| 66 | Providing and fixing accessories of standard and quality make of approved manufacturer including all necessary fixtures required. |
| 67 | AL-Drops for room door |
| 68 | T- Bolt for doors |
| 69 | T- Bolt for Windows |
| 70 | Handles for door |
| 71 | Handels for window |
| 72 | 15 mm C.P. brass 2 in 1 tap of approved quality conforming to IS standards |
| 73 | 15 mm C.P. angle valve for approved brand and manufacture |
| 74 | C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge. |
| 75 | 15 mm nominal bore C.P head shower of approved quality conforming to IS standards |
| 76 | Providing hoisting and fixing trusses/purlins/rafters/posts/post plates or like components of 1st class budloo/fir wood including cost of screws etc complete. |
| 77 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required |
| 78 | Filling available excavated earth (excluding rock) in trenches plinth, sides of foundation etc in layer not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, lead upto 50cm and lead up to 50 m and lift upto 1.5 mtr. |
| 79 | Disposal of Surplus earth/ mulba by an avg. lead 3Km by MT. |
| 80 | Supply, Installation, Testing and Commissioning (SITC) of High Wall dual invorter split air conditineer unit of 1.50 ton (TR) cooling capcity , comprising 1No in door unit 8IDU) and 1 No out door unit fitted with a variable speed dual votary invertor including stablizer, with wire less LCD Remote, including all neccesary fixture or components complete job (with LG Company) |
| 81 | LOCAL TYPE LATERINE |
| 82 | Earth work in excavation by manual means in foundation trenches or drains (notexceeding 1.5 m in width or 10 sqm on plan), including dressing of sides andramming of bottoms, lift upto 1.5 m, including getting out the excavated soil anddisposal of surplus excavated soil as directed, within a lead of 50 m. |
| 83 | All kinds of soil. 50% |
| 84 | Ordinary rock 30% |
| 85 | Hard rock (requiring blasting) 20% |
| 86 | Providing and laying of soling stone hand packed tightly incld. Cost of stone |
| 87 | MUDMAT: Cast-in-situ of concrete work of nominal mix concrete M7.5 grade (1:4:8) nominal maximum size of stone aggregate 40mm volumetric batching in foundation trenches and ground floor, including curing but excluding formwork costs. (code 4.4.7) |
| 88 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 89 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) |
| 90 | Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) (crushed) Mud Mate(Use Of Portland Pozzolana Cement Is advised as Per Green Building Guidelines OR 25% replacement of Ordinary Portland cement with fly ash by weight of cement used in structural concrete.) |
| 91 | Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20 mm nominalsize) (Use Of Portland Pozzolana Cement Is advised as Per Green Building Guidelines OR 25% replacement of Ordinary Portland cement with fly ash by weight of cement used in structural concrete.) |
| 92 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundation, footing bases of column |
| 93 | Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 94 | Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform. |
| 95 | Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts. |
| 96 | Centering and shuttering including strutting, propping etc. and removal of form for: Edges of slabs and breaks in floors and walls |
| 97 | 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand) |
| 98 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for seperately) Second class Kail wood |
| 99 | Providing and fixing panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for seperately,all complete as per direction of Engineer-in-charge.(Second class Kail wood 35 mm thick shutter) |
| 100 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40mm thick.Second class Kail wood . |
| 101 | Applying one coat of water thinnable cement primer of approved brandand manufacture on wall surface |
| 102 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 103 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) (Note: It Should have Low or No VOC as per Green Building guidelines) |
| 104 | Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 105 | Providing and fixing texture 6mm ply self polised in ceiling including all necessary |
| 106 | Providing and fixing accessories of standard and quality make of approved manufacturer including all necessary fixtures required. |
| 107 | AL-Drops for room door |
| 108 | T- Bolt for doors |
| 109 | T- Bolt for Windows |
| 110 | Handles for door |
| 111 | Handels for window |
| 112 | Providing and fixing 5mm thick glass pane including beading complete |
| 113 | Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete First class Budloo/Fir wood |
| 114 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 115 | Disposal of Surplus earth/ mulba by an avg. lead 3Km by MT. |
| 116 | Providng and fixing versa carpet self design (Heavy) including 25mm thick foarm with solution complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender