Tender For Proposed Construction Of Day Care School In Sy No- 176/ 1, 176/ 2, & 177/ 1 At Mokhard In V.P. Shristhal In Canacona Constituency, Goa.
Tender Value
2.26 Crore
Estimated cost
Bid Submission
23 Sep 2026
7 days left
EMD
4.53 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Proposed Construction Of Day Care School In Sy No- 176/ 1, 176/ 2, & 177/ 1 At Mokhard In V.P. Shristhal In Canacona Constituency, Goa.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 02-Sep-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 09-Sep-2026 |
| 2 | 09-Sep-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 16-Sep-2026 |
| 3 | 16-Sep-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 23-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Felling trees of girth (measured at a height of 1. m. Above ground level) inluding cutting of trunks and branches removing the roots stacking the serviceable material and disposal of unserviceable material for all leads :Beyond 30 cm and upto 60 cm grith |
| 2 | Felling trees of girth (measured at a height of 1. m. Above ground level) inluding cutting of trunks and branches removing the roots stacking the serviceable material and disposal of unserviceable material for all leads :Beyond 60 cm and upto 120 cm grith |
| 3 | Felling trees of girth (measured at a height of 1. m. Above ground level) inluding cutting of trunks and branches removing the roots stacking the serviceable material and disposal of unserviceable material for all leads :Beyond120 cm and upto 240 cm grith |
| 4 | Felling trees of girth (measured at a height of 1. m. Above ground level) inluding cutting of trunks and branches removing the roots stacking the serviceable material and disposal of unserviceable material for all leads :Beyond 240 cm girth |
| 5 | Surface dressing of ground including removing vegetation in equalities not exceeding 15 cm deep and disposal of rubbish lead upto 50 m and lift upto 1.5 m.Ordinary soil |
| 6 | Earthwork in surface excavation not exceeding 30 cm depth (but exceeding 1.5 m width as well as 10 sq.m on plan) including disposal of excavated earth beyond work site for all leads lift disposed earth to be leveled and neatly dressed in:Ordinary Soil |
| 7 | Earthwork in excavation by mechanical means (hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed in :All kinds of soil |
| 8 | Earthwork in excavation by mechanical means (hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed in :All type of ordinary rock including all type of laterite rock, blasting prohibited |
| 9 | Earthwork in excavation by mechanical means (hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed in :Hard Rock where blasting prohibited |
| 10 | Earthwork in excavation by mechanical means (hydraulic excavator) / manual means in foundation pipeline trenches drain (not exceeding 1.5 m in width or 10 sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m.All kinds of soil. |
| 11 | Extra for additional depth of 1.5 m or part thereof in: All types of soil from 1.5M to 3.0M |
| 12 | Extra for additional depth of 1.5 m or part thereof in: from 3M to 4.5M |
| 13 | Extra for additional depth of 1.5 m or part thereof in: from 4.5M to 6M |
| 14 | Refilling the pipeline / foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge. |
| 15 | Supplying and filling in plinth under floors, trenches including watering ramming consolidating, dressing, complete.Sand |
| 16 | Supplying and filling in plinth under floors, trenches including watering ramming consolidating, dressing, complete.Moorum |
| 17 | Clearing jungle including up rooting of rank vegetation grass bush wood trees and sapling of girth upto 30 cm measured at a height of 1 m above ground level & removal of rubbish upto a distance of 50 mt. outside the periphery of the area cleared. (if however, only grass is met with the area will be measured and paid for under item 4001). |
| 18 | Providing anti - termite treatment to buildings conforming to I.S.S. 6113 part II 1971 (revised) including adopting precautions for health hazards and safety measures as required therein with the cost of all materials, chemicals, plants, equipments required for the treatment and furnishing a guarantee for a minimum period of 10 years from the date of completion including eradicating any infestation of termite free of cost during the guaranty period complete. (The payment will be made on plinth of the building. Pre construction |
| 19 | Disposal of moorum / building rubbish / malba / surplus excavated earth similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading Complete including Royalty |
| 20 | Filling of the plinth / foundation with outsource earthworks. |
| 21 | Masonry Work Pre-cast cement concrete solid block masonry of compressive strength 70 kg / cm2 in cement mortar 1:4 (1 cement : 4 corase sand) in foundation and plinth size of blocks (30 x 20 x 15) In foundation and plinth |
| 22 | Pre-cast cement concrete solid blocks masonry of compressive strength 70 kg / cm2 in cement mortar 1:4 (1 cement : 4 corase sand) in partition walls size of blocks (30 x 20 x 10) |
| 23 | Brick work using common burnt building bricks in cement mortar 1:4 (1 cement : 4 coarse sand) with bricks of class designation 75 kg/ cm2 (wire cut bricks)In superstructure upto floor five level. |
| 24 | Half brick masonry in cement mortar 1:4 (1 cement : 4 coarse, sand) with bricks of class designation 75 kg / sq. cm upto floor five level .Cement mortar 1:4 (1 cement :4 coarse sand) |
| 25 | Providing and laying Autoclave Aerated cementblocks masonry (Light Weight Foam ConcreteBlocks) with 100 mm thick AAC blocks in superstructure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand). Therate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work. |
| 26 | Plain Concrete workProviding & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in:All works upto plinth level |
| 27 | Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in:In retaining walls, return walls (any thk) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping bed blocks, anchor blocks, plain window sills, fillets etc, upto floor five level. |
| 28 | Providing & laying cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in:All works upto plinth level |
| 29 | Providing & laying cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in:In retaining walls, return walls(any thk) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping bed blocks, anchor blocks, plain window sills, fillets etc, upto floor five level. |
| 30 | Centering & shuttering including Strutting, Propping & removal of forms for : Foundations, footings, bases for columns and mass concrete. |
| 31 | Centering & shuttering including Strutting, Propping & removal of forms for : Columns, Pillars, piers, abutments, posts and strut, square, rectangular, polygon in plan. etc. |
| 32 | Providing and laying upto floor five level precast cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggregate 20 mm nominal size) including hoisting and setting in position in cement mortar 1:3 (1cement : 3 Coarse sand) including smooth finishing the exposed surfaces, with cement mortar 1:3 (1 cement: 3 fine sand) including centering and shuttering etc.Kerbs, steps and the like at or near ground level |
| 33 | Providing and laying upto floor five level precast cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggregate 20 mm nominal size) including hoisting and setting in position in cement mortar 1:3 (1cement : 3 Coarse sand) including smooth finishing the exposed surfaces, with cement mortar 1:3 (1 cement: 3 fine sand) including centering and shuttering etc.String courses, copings, bed plates, anchor blocks, plain window sills and the like. |
| 34 | Providing and laying upto floor five level precast cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggregate 20 mm nominal size) including hoisting and setting in position in cement mortar 1:3 (1cement : 3 Coarse sand) including smooth finishing the exposed surfaces, with cement mortar 1:3 (1 cement: 3 fine sand) including centering and shuttering etc.Small lintels not exceeding 1.5 m clear span, including coping and the like requiring form work to suspended portions. |
| 35 | Providing & laying damp proof course 40 mm thick with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone agg 12.5 mm nominal size). |
| 36 | Providing & laying damp proof course 50 mm thick with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone agg. 20 mm nominal size). |
| 37 | Making plinth protection 50mm thick of Cement Concrete 1:3:6 (1cement: 3 Coarse Sand: 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry laterite aggregate 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. |
| 38 | Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering, shuttering and finishing :In retaining walls, return walls (any thk) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping bed blocks, anchor blocks, plain window sills, fillets etc, upto floor five level. |
| 39 | Providing and laying in position ready mixed plain cement concrete,M-15 grade plain cement concrete (cement content considered @ 240 kg/cum). |
| 40 | All works above plinth and up to floor V level:M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) |
| 41 | Reinforced Cement concrete.Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size)All works upto plinth level |
| 42 | Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size)In walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and structs etc. upto floor five level. |
| 43 | Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size)In beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases upto floor five level. |
| 44 | Providing and laying upto floor five level reinforced cement concrete (1:2:4) in kerbs, steps and the like excluding the cost of centering, shuttering and finishing and reinforcement (1 cement: 2 coarse sand: 4 graded grantic or basaltic aggreate 20mm nominal size. |
| 45 | Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1½ :3 (1cement: 1:1½ coarse sand: 3 graded stone agg 20mm nominal size). |
| 46 | Centering and shuttering including strutting, propping etc. and removal of form for :Foundations, Footings, Bases for columns |
| 47 | Centering and shuttering including strutting, propping etc. and removal of form for :Vertical surfaces such as retaing walls, return walls, Partitions, walls (any thickness) including attached Pilasters, Buttresses, Plinth and string courses, Fillets and the like |
| 48 | Centering and shuttering including strutting, propping etc. and removal of form for :Columns, Piers, Pillars, Aburments, Posts and struts (square rectangle polygon in plan) |
| 49 | Centering and shuttering including strutting, propping etc. and removal of form for :Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams not exceeding 1m in depth |
| 50 | Centering and shuttering including strutting, propping etc. and removal of form for :Staircases (except spiral staircases) excluding landing |
| 51 | Centering and shuttering including strutting, propping etc. and removal of form for :Suspended floors, roofs landings, shelves & their supports |
| 52 | Centering and shuttering including strutting, propping etc. and removal of form for :Vertical or horizontal fins individually forming box louvers or projected bands |
| 53 | Centering & shuttering including Strutting, Propping & removal of forms for sloping or battering surface (slabs, beams, louvers, etc) including folded platesCornices & Mouldings |
| 54 | Extra to be added for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de- shuttering and de-centering at all levels, over a height of 3.5m, for every additional height of 1m or part thereof. (Plan area to be measured) Suspended floors, roofs, landings, beams and balconies (plan area to be measured). |
| 55 | Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member. |
| 56 | Providing Pre-cast cement concrete jali 1:2:4 (1 cement: 2 coarse sand: 4 stone aggreate 6mm nominal size) reinforced with 1.6mm dia mild steel wire including centering and shuttering, roughening, cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine snad) all complete excluding plastering of the jambs, sill sand soffits .50 mm thick |
| 57 | Providing and laying in position ready mixed concrete (RMC) with usage of Ordinary Portland Cement manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate / retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineerin-charge. All works upto floor V level.M-35 grade of concrete |
| 58 | Providing and laying in position ready mixed concrete (RMC) with usage of Ordinary Portland Cement manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate / retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineerin-charge. All works upto floor V level.M-40 grade of concrete |
| 59 | Providing and laying in position ready mixed concrete (RMC) with usage of Ordinary Portland Cement manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate / retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineerin-charge. All works upto floor V level.M-50 grade of concrete |
| 60 | Providing and placing in position controlled cement concrete of M-40 grade using minimum cement content as 400Kg/cum and max water cement ratio of 0.40 for Prestressed Concrete Girders as per detailed drawings and designs having form finish surfaces including formwork on casting bed and temporary supports as necessary and required, compacting by vibrators, levelling, curing and finishing etc. complete as specified and directed including launching the girders in position using plant and equipment and providing erecting and removing the temporary staging as necessary and required etc. complete as specified and directed excluding reinforcement and placing in position. (Using RMC/Batch Mix Plant, Tansit Mixer and Concrete Pump).PSC M-40 GradeUsing RMC/Batch Mix Plant, Tansit Mixer and Concrete PumpFor solid slab / voided slab super-structureFloor Height upto 5m. Note: - The quantity shall be measured every floor level and for the height of floor not exceeding 5.0 Mts and not the height of the building in totality for the purpose of quantity measurements and payment. |
| 61 | Wood WorksProviding woodwork in frames of doors, windows, clerestory windows trusses & other frames wrought framed and fixed in positon.First class Indian teak wood |
| 62 | Providing woodwork in frames of doors, windows, clerestory windows trusses & other frames wrought framed and fixed in positon.Second class Indian teak wood |
| 63 | Providing and fixing 50 mm thick panelled glazed or panelled and glazed shutters for doors, windows and clerestory window including anodized aluminium butt hinges with necessary screws:First class Indian teak wood |
| 64 | Providing and fixing flush doors shutters commercial type, core of block board construction with frame of first class hard wood and well matched commercial ply veneering and vertical grains or cross bands and face veneers on the both faces of shutters.35mm thick including anodized aluminium butt hinges with necessary screws: |
| 65 | Providing and fixing bright finished brass door latch with necessary screws etc complete300x 16 x 5 mm |
| 66 | Providing & fixing bright finished brass 100 mm. mortice latch & lock & a pair of levers, handles with necessary screws etc. complete (Indian make of approved quality). |
| 67 | Providing & fixing bright finished brass 100 mm rim latch & lock & a pair of knob, with necessary screws etc. complete (Indian make of approved quality). |
| 68 | Providing and fixing chromium plated brass flush bolts with necessary screws etc. complete50 mm |
| 69 | Providing and fixing chromium plated brass handle with necessary screws etc. complete125 mm |
| 70 | Provided and fixing 150 mm chromium plated brass floor door stopper with rubber cushion screws etc. to suit shutters thickness complete. |
| 71 | Wood Finish Wood Core FRP (Fiber Reinforced Polymer) Door Shutter Manufacture, Supply and Installation (including accessories as mentioned below) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) door shutter of specified thickness as per options below by using tray system with seasoned hard wood, moisture less than 17%, wooden styles for Top rail and lock rails. FRP (Fiber Reinforced Polymer) laminate made up of 450 grams per sq.mts (gsm) chop strand matt and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps) and printed matt having wooden textures used along with UV Resistant resin to give the clear texture on the door. The core of shutter will be filled with MR 2nd grade Block Board. The Shutter to be water proof as well as mild acid / alkali resistant manufactured using RV TIFAC (R V Engineering College, Bangalore & Technology Information Forecasting & Assessment Council) technology in line with IS 13034 1990 test Standard in an ISO 9001 – 2015 certified factory.Accessories:i) S. S. Hinges 4” - 3 Nosii) S. S. Latch - 1 Noiii) Tower Bolt 5” - 2 Nosiv) Handle 5” - 2 NosNote: For 35 & 40mm thickness shutters, only frames of 5 x 2 ½ Cross section frames to be used.Shutter Thickness 32mm |
| 72 | FRP (Fiber Reinforced Polymer) Frames with Wood FinishManufacture, Supply and Installation (with anchor fastener) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) Frame of cross section as per options below with right angle joint and FRP (Fiber Reinforced Polymer) laminate made from 450 grams per sq.mts (gsm) chop strand glass fiber (matt) and unsaturated polyester resin with viscosity range of 400 / 450 centipoises per second (cps). The core of frame would be filled with seasoned wood as infill material. The slot of frame for door resting will be of suitable width so as to take specified thickness door. The frame will be water proof as well as mild acid / alkali resistant manufactured in an ISO 9001- 2015 certified company.Specified Cross Section :4” x 2 ½ “ |
| 73 | FRP (Fiber Reinforced Polymer) Frames with Wood FinishManufacture, Supply and Installation (with anchor fastener) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) Frame of cross section as per options below with right angle joint and FRP (Fiber Reinforced Polymer) laminate made from 450 grams per sq.mts (gsm) chop strand glass fiber (matt) and unsaturated polyester resin with viscosity range of 400 / 450 centipoises per second (cps). The core of frame would be filled with seasoned wood as infill material. The slot of frame for door resting will be of suitable width so as to take specified thickness door. The frame will be water proof as well as mild acid / alkali resistant manufactured in an ISO 9001- 2015 certified company.Specified Cross Section :5” x 2 ½ “ |
| 74 | Steel & Aluminium workProviding and fixing M.S. fan clamp type 1or II of 16 mm dia M.S. bar bent to shape with hooke ends in R.C.C. slabs, beams during laying including painting the exposed portion of loop, all as per standard design complete. |
| 75 | Providing & fixing M.S. round holding down with nuts & Washer plates complete |
| 76 | Providing & fixing bolts with nuts & washer complete. |
| 77 | Providing & fixing M.S. Rivets of sizes in position. |
| 78 | Welding by gas plant (using Ador or ES4B or Deh Secheron make electrodes only) |
| 79 | Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings, the aluminium quality asper grade 6063 T5 or T6 as per BS 1474, including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). |
| 80 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc.including:a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick luminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing. The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assemble working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. |
| 81 | Steel work welded (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only) in built up sections trusses and framed work including cutting, hoisting, fixing in position and applying priming coat of red lead paint.In R.S. Joists |
| 82 | Steel work welded (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only) in built up sections trusses and framed work including cutting, hoisting, fixing in position and applying priming coat of red lead paint.In tees, angles, flats and channels |
| 83 | Providing and fixing of aluminium windows with three tracks and three shutters sliding windows with tubular frame sections powder coated with pure polyster powder of thickness 15-80 microns with approved standard acessories such as ball bearing rollers concealed lock, 6mm plain clear glass with EPDM beading etc. |
| 84 | Flooring workKotah stone slab flooring over 20 mm (average) thick base laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & complete with base of cement mortar 1:4 (1 cement : 4 coarse sand)20 mm thick. |
| 85 | Kotah stone slab flooring over 25 mm thick in risers of steps, skirtings, dado & pillars laid on 12mm (average) thick cement mortor 1:3 (1 cement : 3 coarse sand) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete. |
| 86 | Providing and and laying vitrified floor tiles in different sizes of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc., complete600 x 600 mm light Shades |
| 87 | Providing and and laying vitrified floor tiles in different sizes of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc., complete900 x 900 mm light Shades |
| 88 | Providing and laying 500x500x40mm thick Turf paver (Turf pave XD) on 150mm thick sub grade of compacted bed of 20mm thick nominal size stone aggregate and base course and filling with 150mm thick jamuna sand including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer-in-charge. |
| 89 | Extra For Providing and Laying Blue / Black Pearl for dado cladding extra in varying sizes (only additiona rate is considered) |
| 90 | Providing and and laying antiskid floor tiles 12 x 12 upto 16 x 16 in of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., completeDark Shades |
| 91 | Providing and and laying antiskid floor tiles 12 x 12 upto 16 x 16 in of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., completeLight Shades |
| 92 | Providing and fixing 1st quality ceramic glazed wall tiles (Johnson, Somany, Kajaria ) conforming to IS:15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in -charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @3.3kg per sq.m including pointing in white cement mixed with pigment of matching shade complete.Wall Ceramic Glazed Tiles : 300 x 600 |
| 93 | Extra for providing opening of required size & shape for wash basin / kitchen sink in kitchen platform, vanity counter and similar location in marble / Granite / Cuddapah stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. |
| 94 | Providing 20mm thick marble slab to urinal partitions with cement complete |
| 95 | Roofing & Ceiling workProviding corrugated G.I. sheet roofing, fixed with galvanized iron j or 1 hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers filled with white lead complete excluding the cost of purlins rafter and trusses.0.63 mm thick sheet - 24 G |
| 96 | Providing valleys 90 cm overall in plain 1.60 mm thick G.I. sheet fixed with galvanized iron j or l hooks bolts 8mm dia G.I. limpet and bitumen washers complete. |
| 97 | Providing angular fillets 7.5 x 7.5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone) ggregate 20mm nominal size) |
| 98 | Making khurras 45 x 45cm with average minimum thickness of 5cm of cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 stone aggregate of 20mm nominal gauge) finished with 12mm cement plaster 1: 3 (1 cement: 3 coarse sand) & a coat of neat cement rounding the edges and making and finishing the outlet complete. |
| 99 | Supplying and Providing in position under deck 50mm thk non combustible Glass wool insulation 24 kg/m3 density with white prelaminated polypropelene facing (WMP-50) under the metallic roof complete for sound and heat insulation including cost of GI welded mesh of 75x75x1.60 thk streched over purlin complete. The GI Welded mesh should be primed and painted with min. 2 coats of superior quality ready mixed paint for steel work. |
| 100 | Plastering & Finishing works12mm cement plaster 1:6 (1 cement : 6 fine sand) |
| 101 | 15mm cement plaster 1: 4 (1 cement : 4 fine sand) on the rough side of single or half brick wall. |
| 102 | 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge. |
| 103 | Distempering two or more coats with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade. |
| 104 | Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade. |
| 105 | Applying priming coat with ready mixed primer of approved brand and manufacture on wood work complete. |
| 106 | Water Supply & Sewerage.Proving and fixing white vitreous china water closet squatting pan (Indian type w.c. pan) size 580 mm with 100 mm sand cast iron P. or S trap 10 litres high level P.V.C. flushing cister (of approved make) with fittings, rack bolts 32 mm diameter P.V.C telescopic flush pipe with fittings and clamps 25mm P.V.C. over flow pipe with specials & mosquito proof coupling of approved municipal design and nylon pull complete cutting and making good the walls and floors where required.Orissa pattern W.C. pan |
| 107 | Providing & fixing (4’) 100 mm sand cast iron grating for gully floor or nahni trap. |
| 108 | Cutting chase in brick masonry walls for fixing 50 mm diameter sand cast iron pipes & making good the same with brick work in cement 1:3 (1cement :3 fine sand). |
| 109 | Providing and fixing brass bib cock (heavy) of approved quality :15 mm nominal bore. |
| 110 | Providing and fixing brass stop cock (heavy) of approved quality15 mm nominal bore. |
| 111 | Providing and fixing square-mouth S.W. gully trap grade ‘A’ complete with c.i. grating brick masonry chamber and water tight C.I. cover with frame of 300 x 300 mm size (inside the weight of cover to be not less than 4.53 kg). And frame to be not less than 2.72 kg as per standard design :150 x 100 mm size – P or S type |
| 112 | Extra for depth for manholes : size 1.2 x 90 cm |
| 113 | Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5pipe).15 mm nominal outer dia. Pipes. |
| 114 | Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5pipe).20 mm nominal outer dia. Pipes. |
| 115 | Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5pipe).25 mm nominal outer dia .Pipes. |
| 116 | Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5pipe).32 mm nominal outer dia. Pipes. |
| 117 | Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5pipe).40 mm nominal outer dia. Pipes. |
| 118 | Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5pipe).50 mm nominal outer dia. Pipes. |
| 119 | Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solventcement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc.15 mm nominal outer dia .Pipes. |
| 120 | Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solventcement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc.20 mm nominal outer dia .Pipes. |
| 121 | Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solventcement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc.25 mm nominal outer dia .Pipes. |
| 122 | Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot and cold water supply includng all CPVC plain and brass threaded fittings CPVC solvent cement, trenching, refilling and testing of joints complete as per firectionof the Engineer in charge. (External work (heavy duty SDR 11 pipe)32 mm nominal outer dia. Pipes. |
| 123 | Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot and cold water supply includng all CPVC plain and brass threaded fittings CPVC solvent cement, trenching, refilling and testing of joints complete as per firectionof the Engineer in charge. (External work (heavy duty SDR 11 pipe)40 mm nominal outer dia. Pipes. |
| 124 | Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot and cold water supply includng all CPVC plain and brass threaded fittings CPVC solvent cement, trenching, refilling and testing of joints complete as per firectionof the Engineer in charge. (External work (heavy duty SDR 11 pipe)50 mm nominal outer dia. Pipes. |
| 125 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work62.50 mm nominal inner dia. Pipes. |
| 126 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work75 mm nominal inner dia. Pipes. |
| 127 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work100mm nominal inner dia. Pipes. |
| 128 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work150 mm nominal inner dia. Pipes. |
| 129 | Providing and fixing C.P brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 :15mm nominal bore |
| 130 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
| 131 | Cutting holes up to 30x30 cm in walls including making good the same:With common burnt clay F.P.S. (non modular) bricks. |
| 132 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. |
| 133 | Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement :4 coarse sand), in side cement plaster 12 mm thick with cement mortar 1:3 (1cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately):With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 134 | Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91 m to 1.67 mWith Sewer bricks conforming IS : 4885 |
| 135 | Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mm x 25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. |
| 136 | Constructing brick masonry road gully chamber 50 x 45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 137 | Providing and fixing of any shape over-counter wash basin including Tall Body Basin Mixer, One Aquisense sensor faucet for wash basin with base flange , brass waste coupling, and all other fittings and fixtures complete including cuttings and making good the walls and floor wherever required The wash basin and basin mixer shall be of Parryware/H&R Johnson/Hindware with a total basic price of not less than Rs. 10000/-. |
| 138 | Providing and fixing 100 mm dia weight not less than 100 gms. stainless steel jali (grating) with or without hole for waste pipe of for floor or Nahani trap |
| 139 | Providing and fixing C.P. BRASS Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 230mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 260gms. |
| 140 | Making connection of CPVC distribution branch with CPVC main of following sizes by providing and fixing tee, including cutting and threading the pipe etc complete.25 to 40 mm nominal bore |
| 141 | Providing and fixing soil, waste and vent pipes including M.S. Z bracket65MM DIA P.V.C. |
| 142 | Providing and fixing soil, waste and vent pipes including M.S. Z bracket75MM DIA P.V.C. |
| 143 | Providing and fixing soil, waste and vent pipes including M.S. Z bracket110MM DIA P.V.C. |
| 144 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.65MM DIA P.V.C. |
| 145 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.75MM DIA P.V.C. |
| 146 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.110MM DIA P.V.C. |
| 147 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.65MM DIA P.V.C. |
| 148 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.75MM DIA P.V.C. |
| 149 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.110MM DIA P.V.C. |
| 150 | Providing, laying and jointing DWC pipes including testing of joints etc. complete :150 mm diameter |
| 151 | Providing, laying and jointing DWC pipes including testing of joints etc. complete :200 mm diameter |
| 152 | Providing, laying and jointing DWC pipes including testing of joints etc. complete :250 mm diameter |
| 153 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of DWC pipes including bed concrete as per standard design :150 mm diameter DWC pipe |
| 154 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of DWC pipes including bed concrete as per standard design :200 mm diameter DWC pipe |
| 155 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of DWC pipes including bed concrete as per standard design :250 mm diameter DWC pipe |
| 156 | Providing and fixing in position heavy duty C.I. manhole cover and frame of required shape and approved quality (120Kg)Rectangular shape 600x450 mm internal dimensions |
| 157 | Waterproofing worksProviding and laying integral cement based treatment (Box type) for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer and consisting of :i) Ist layer of 20 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the leveling course (leveling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound.ii) 2nd layer of 25 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportions.iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm / sqm thoroughly embedded in the 2nd layer using rough Shahbad / Kotah stone. |
| 158 | Miscellaneous work CNC CUT PANELSDesigning, Supplying, Assembling / fabricating, Installation, finishing, testing and fixing in position of 3mm thick 6063 T6 Aluminium Laser / CNC Cut Elevational Panels (Jali design) of approved make, color, shape, size & design and to have monotonous span without joint as per manufacturers specifications & standards. The product composition to be Aluminium with extended exterior coatings . The assembly to be fixed using 19mm SS 316 (10mm or 20mm), Coloured 22mm Wafer Head Screws, Aluminium rivets etc complete to the satisfaction of the Engineer in charge and as per directions |
| 159 | MOTORIZED STEEL GATESITC of steel Gate to be manufactured as per the drawing. Gate shall be prepared out of outer frame in 50mm dia. M.S. medium duty pipes of Tatas or equivalent manufacturer. Lower 260mm portion to be provided with 3mm perforated M.S. sheet with 150mm wheel with double ball bearings and 12 mm M.S Squares at 150 mm centres for the prescribed height of 600 mm including toothed rack of Galvanized type including locking arrangement etc complete.Motor is to be provided for maintaining the gate speed of 10m/minute. Electrical power panel required for the operation of the motor is to be provided by the vendor. Vendor has to provide and lay all the wiring between motor & power panel. Any accessories such as contractors, switches, push buttons required for the functioning of the gate operation system are to be provided by the vendor. However, power supply input for the power panel will be made available by the client. Vendor should obtain prior approval of wiring & protection circuit for the motor operation. Motor should be supplied of standard brand. |
| 160 | Table for PrincipalProviding and supplying table for theofficer to be made out of BWR IS:303 19mm thk plywood finished with approved 1.0mm thk Laminate & 1.0 mm thk Laminate for all other exposed areas. The top of the table to have t.w. moulding all around. The rate shall be inclusive of providing a keyboard tray on sliding telescopic channels & a pedestal drawer unit made out of BWR IS:303 19mm thk plywood on side with 2 nos of equal sized drawers on sliding channels & openable shutter below. The rate shall be inclusive of providing & fixing in position side credenza of size 3'-6\\"(L) x 2'-6\\"(H) x 1'-6\\"(W) BWR IS:303 19mm thk plywood to be finished with 1.0mm thk laminate for all external exposed surfaces and 0.8mm thk Laminate for all internal surfaces including a shelf inside in laminte finish, 1mm thk, all necessary hardware, fitting & fixtures, etc. complete.All internal surfaces to be finished in approved 0.8mm thk laminate. All the external surfaces shall be finished with 1.0mm thk approved high end laminate including the drawer unit. The table shall have 8mm. thk clear glass on top with bevelled edges. The rate shall also include CPU trolley of reputed manufacturer, keyboard trays as per the approved makes which shall be heavy duty. The necessary hardware such as automatic locking, ball catches, wire managers etc. to be provided as per the instructions of the Architect. The rate shall also include providing stand-alone foot rest to the table of projection width as directed to be finished with approved veneer with melamine polish etc complete for the entire length of the table. The Elevation of the table shall be as directed by Architect on site.(Basic Rate of Keyboard Tray - Rs.900/-).(4'-6\\" X 2'-6\\") |
| 161 | Linear Workbenches for StaffSupply & installation of Linear Workbenches as per layout size 1050Lx600Wx600H mm to be mounted over Low Height PARTITION: With minimum dimension of 1200mm ± 10 mm height and minimum 60 mm ± 10 mm thick two tile sliding base system (Partition shall be quantified herein the said item of Workstation & no seperate payment towards Partitions or its finishes shall be made elsewhere). Table tops shall be made of 25mm thk Pre-laminated Partical boards of approved laminate seude finish conforming to IS : 12823 Interior Grade with 2 mm thick pvc edgebanding of matching shade to make it make it more resisitant towards heat and moisture. A specially designed powder coated M.S. brackets shall be fixed to the partition frame to support the table tops. Gable ends shall be made of 25mm thk prelam Partical board of suede finish with both side laminate (BSL) and connected to frame with help of metal powder coated brackets to support table top. Frames :- Partition thickness shall be of 60mm ± 10 mm for stability and with the inside gap between two tile is approximately 50mm ± 10 mm for higher wire carrying capacity. Frame Horizontals shall be made of 1mm thick CRCA sheets & the verticals are made of Aluminium Extrusions of 1.5mm thick, All the frames will be duly powder coated upto 50-60 dft , which will be inline with the Top trims & end trims, All the Caps viz end, inline & universal & raceway caps are made out of Die-cast Aluminum. The partition must have three integrated raceway provided one at skirting level and another two at below & above the work surface level thus ensuring separation of power and networking cables. PARTITION SHALL BE INCLUDED and comprising of combinations in the Partition enclosures with Soft board tiles of approved color, shade & texture, Magnetic boards, white boards marker tiles, Pre-laminated MDF boards & combination with Glass Panels in 6mm thk Glass (Glass proposed only for end workstations) with designer frosted film of approved make, shade & texture. The free space available within raceway accommodates power, data and communication cables. Metal CPU Trolley & Keyboard tray to be considered. BottomTile: Bottom row of frame is of MDF prelam, from both internal and external sides, made of 6 mm thick MDF board with std color. Fabric tile: Constructed out of 4 mm thick MDF board, and covered with fabric of std color. Soft pin up tile: made out of 0.8 mm thick galvanized iron sheet with 8mm thick cross linked foam and covered with fabric of std color. A drawer Unit with 2 number of pencil drawers for each of the workstations made of 18mm thick pre laminated Partical Board conforming to IS :12823 Interior Grade to be provided from the top of the table. All the exposed edges are sealed with 2mm thick PVC edge banding on sides and bottom. The sides of Inside drawer box are of prelam Partical board. The drawer box is fitted with roller Slide for free movement. The drawer unit is provided with individual locking system. PVC recessed handles are provided for easy opening and closing of drawer. |
| 162 | SOFAS: -Providing & Supplying Sofas, Sofa chairs of various types & categories (Single seater, Two seater & Three seater) etc complete as per the manufacturers specifications as mentioned below. The rights to select & approve the sofas & seating shall vest with the clients. The contractor shall submit brochures of manufacturer at the time of quoting for this item etc complete as per layout. The consultants reserve the right to select the sofas in line with the technical specifications envisaged & meeting the secifications standards expected. The minimum standards for the Specifications of Sofas shall be as follows: - Inner solid Frame structure made of high quality wood. The wood is kiln chemical treated tropical Meranti wood. The legs are made of rubberwood having melamine matt finish. The seat cushion is made of 7 inches multi layered foam of density 32D 23D 32D and HD with polyester polyfill outer layer of 180 gsm. The polyester polyfill keeps the upholstery wrinke free and soft. The seating cushions have 3 inches of elastic webbing of 350 gsm with proper weave. The thread used is nylon bonded to provide lasting stitch strength. Backrest: 2\\" elastic webbing (250 gsm) with proper Weave and 3\\" foam (23D) with Polyester polyfill outer layer (180 gsm). Outer finish: stained solid wooden legs superior quality. Frame construction: Kiln seasoned mixed meranti solid tropical hard wood SEAT Webbing 3\\" proper webbing. Foam: 7\\" Multilayered foams Having 4\\" of High Resilience-HD Foam and 3\\" of HD virgin PU Foam. BACKREST: Webbing 2\\" elastic webbing , Foam: 18D PU foam Upholstery: semi PU with layer of polyester polywadding Stitiching Nylon thread. Legs Solid kiln seasoned and treated Solid wood with Melamine Matt Finish. Leatherite SofasSingle Seater Sofas |
| 163 | Corner Table ( 1'-6\\" x 1'-6\\" )Providing, Supply & installation of Corner table- MATERIALS & DIMENSION (+/- 2mm) - 600L x 600W x 450H. TABLE MATERIALS & SIZE : TOP : SOLID VENEERED MDF TABLE TOP in 18 mm thickness OR GLASS TOP 10mm. LEGS: SOLID RUBBER /MS understructure, WOOD. Color : As Approved. LEGS: Color : As Approved. REST ANY STD COLOUR. The rate shall include including glass top to have bevelled edges including bottom glass shelf etc complete. The rate shall also include all the necessary hardware, fittings, fixtures as per manufactursrs specifications complete. |
| 164 | CHAIRSProviding & Supplying Chairs of approved makeProviding & Supplying premium class & high end Chairs for different categories with minimum technical specifications such as Gas lift, Revolving type, Tilting type, castors, armrest, SS supports and all features of executive chairs as per the approved makes. The basic specifications, which are to be considered as minimum specifications are as follows: - Chair Seat: Pneumatic seat height adjustment (16\\" to 25.5\\"). Chair padding should allow for distribution of weight to be at a maximum. Chair Back : Upper back support should be provided with tall back chairs. The chair back should make contact with individual's upper back and lumbar ( back ) support as per ergonomic principles. Back and seat angle adjustment allow for neutral positioning : 90-120 degree trunk- thigh angle. Back tension adjustment. Variable back stop adjustment on back tilt mechanism with locks in place at various angles.Armrests : Fixed Handles of inflexible PUF with cushioned soft armrest and rounded edges.Mechanism : Sinqle sprinq for full tilt or back tilt 360 deqrees swivel mechanisms with a locking lever. The carraige shall be fibre/metallic powder coated with five prong legs.(Synchro Gas Tilt)Castors : 5 flange or more star base. Twin wheel nylon castor each designed to sustain weight load of 100 Kg. Hard wheel castors for carpet and soft wheel castors for hard flooring.The rights to select & approve the chairs shall vest with the clients. The contractor shall submit brochures of manufacturer at the time of quoting for this item etc complete as per layout. The consultants reserve the right to select the chairs in line with the technical specifications envisaged & meeting the specifications standards expected. Providing and supplying chromium plated metallic dining chairs with fibre glass seat of approved make as per the directions of the Engineer in charge Basic rate Rs. 4500/- of each chairs |
| 165 | Supply and installation of single-seater modular school study table.Dimensions: Overall size 1000 mm (Length) × 600 mm (Width) × 750 mm (Height). [1] Tabletop Material: 25 mm thick pre-laminated particle board or high-density fiberboard (HDF) of interior grade. [1, 2, 3] Edge Finish: All exposed edges finished with 2 mm thick machine-pressed PVC edge-bending tape using hot-melt glue for impact resistance. Understructure: 25 mm thick pre-laminated gable end legs with a matching 18 mm thick pre-laminated particle board modesty panel. [1] |
| 166 | Electrical InternalSub Head - I Wirings and Sub MainsWiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed steel conduit(heavy) with modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.(c) Group C -- with Cat A Modular Accessories |
| 167 | Wiring for 5A /15A power plug with 2 x 4 sq.mm FRLS PVC insulated copper conductor single core cable in recessed steel conduit(heavy) alongwith 1 No 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 168 | Wiring for 5A /15A power plug with 4 x 4 sq.mm FRLS PVC insulated copper conductor single core cable in recessed steel conduit(heavy) alongwith 2 Nos of 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 169 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent recessed steel conduit(heavy)of appropriate size as required.(a) 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earthwire (20mm Conduit) |
| 170 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent recessed steel conduit(heavy)of appropriate size as required.(b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm Conduit) |
| 171 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent recessed steel conduit(heavy)of appropriate size as required.(k) 4 x 10 sq.mm + 2 x 10 sq.mm earthwire (32mm Conduit) |
| 172 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent recessed steel conduit(heavy)of appropriate size as required.(l) 4 x 16 sq.mm + 2 x 16 sq.mm earthwire (40mm Conduit) |
| 173 | Supplying and fixing 3 pin 5 A ceiling rose on the existing junction box/ wooden block including connections etc as required. |
| 174 | Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A modular socket outlet and 5/ 6 A modular switch connection painting etc. as required. (a) Cat A |
| 175 | Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 15/16 A and 5/6 A modular socket outlet modular socket outlet and 15/16 A modular switch connection painting etc. as required.(a) Cat A |
| 176 | Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 4 nos 3 pin 5/6 A modular socket outlet and 4 nos 5/ 6 A modular switch connection painting etc. as required. The scope of work includes alternate arrangement, if required as per site conditions, to provide switches and sockets seperately, above and below the table respectively. ( For workstations)(a) Cat A |
| 177 | Supplying and fixing 20 A 240 V SPN industrial type socket outlet with 2 pole and earth metal enclosed plug top alon with 20 A, C series SP MCB in sheet steel enclosure in surface or in recess with chained metal cover for the socket outlet and complete with connections testing and commissioning etc. as required\\"(a) Cat A |
| 178 | Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required.(a) 20 mm |
| 179 | Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required.(b) 25 mm |
| 180 | Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required.(c) 32 mm |
| 181 | Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required.(d) 40 mm |
| 182 | Supplying and fixing modular blanking plate on the existing modular plate switch box excluding modular plate etc. as required(a) Cat A |
| 183 | Sub Head - II -Distribution BoardSupplying and fixing following way SPN sheet steel MCB distribution board 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required (but without MCB/RCCB/Isolator)(o) 12 way double door Cat B |
| 184 | Supplying and fixing following way TPN sheet steel, double door, Horizontal type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator)(c) 6 way (8+18), double door, Horizontal type Cat A |
| 185 | Supplying installation testing and commissioning of surface/ recess mounting vertical type 415 V TPN, double door MCB DB of sheet steel dust protected duly phosphatised and powder painted inclusive of 200 A tinned copper busbar common neutral link earth bar din bar for mounting MCBs detachable gland knock out plate and with 100 A 10 KA MCCB as incomer interconnection between incomer MCCB and busbars of following ways (but without MCCB/MCBs as required)(c) 12 way with 100A MCCB as Incomer, double door, Cat A |
| 186 | Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.(a) SP MCB, Cat A |
| 187 | Supplying and fixing following rating double pole 240 V isolator in the existing MCB TPN complete with connections testing and commissioning etc as required(a) 40 A, Cat A |
| 188 | Supplying and fixing following rating double pole 240 V isolator in the existing MCB TPN complete with connections testing and commissioning etc as required(b) 63 A, Cat A |
| 189 | Supplying and fixing following rating four pole 415 V isolator in the existing MCB TPN complete with connections testing and commissioning etc as required(a) 40 A, Cat A |
| 190 | Supplying and fixing following rating four pole 415 V isolator in the existing MCB TPN complete with connections testing and commissioning etc as required(b) 63 A, Cat A |
| 191 | Supplying and fixing following rating double pole (single pole and neutral) 240 V RCCB having a sensitivity current upto 300mA in the existing MCB DB complete with connections testing and commissioning etc as required(a) 25 A, Cat A |
| 192 | Supplying and fixing following rating double pole (single pole and neutral) 240 V RCCB having a sensitivity current upto 300mA in the existing MCB DB complete with connections testing and commissioning etc as required(b) 40 A, Cat A |
| 193 | Supplying and fixing SP blanking plate in the existing MCB DB complete as required |
| 194 | Sub Head - III - Supply And Installation of light FixtureThe rates shall include all components that may be required to make the supply and installation complete in all respects such as :All lamps Internal wiring between accessoriesEarthing terminalComplete provision for installationSuitable length of GI down rod, hanger and connecting wires where called for.Wires for connecting the fixtures to the point through connector block.All metal blocks to serve as base of fixturesBonding with earth wires.Drilling holes in supports wherever requiredFixing clamps, GI bolts and nuts, brass screws, saddles, rawl bolts and other fixing accessories as required.All recessed type fixture shall be considered with suitable length of flexible G.I. conduit.Testing of all fixtures & fans before and after installation.Supply ,Installation, testing and commissioning Supply ,Installation, testing and commissioning of the following lighting fixtures with all fixing accessories etc. as required. Supply, Installation, Testing and Commissioning of LED 4ft Batten IP40 luminaire of Robust anodized aluminum housing and high transitivity diffuser (Diffuser-Non yellowing type). The luminaire should have a LEDs with colour consistency SDCM ≤ 5, CRI ≥ 80 and CCT of 6500K. Luminaire shall be designed to emit at least 4000 nominal lumens at a system efficacy of at least 140 lumen/watt. Power consumption should not be more than 28W delivering minimum of 4000 lumens. The electronic driver used shall have a power factor ≥0.9 and THD ≤10%, suitable for an operating voltage range of 140-270V AC, Current Ripple ≤5%, Internal surge protection should be minimum 3.5KV. Manufacturer shall have inhouse lab approved by NABL or Ministry of Science of Govt of India. LM79 and LM80 reports must be submitted from a NABL accredited laboratory. BIS certificate for driver as well as the luminaire must be submitted for records. Driver and luminaire shall be of same make. |
| 195 | Supply, Installation, Testing and Commissioning of maximum 10W recessed/ surface\ mounted High quality polycarbonate diffuser and PDC Al housing recessed design 125 mm Cutout for visual comfort Downlighter delivering >1000 Lumen, 5700K CRI>80, THD <10%, Input voltage Range 140-270 VAC. Replacable driver Luminaire driver both BIS Complient and having CRS ( R No ) L70B50 @ 50K Hrs, Power factor>0.95, IP20 protection, operating temperature range from 0 to 45 deg C, internal surge protection of 2.5kV. LM79 and LM80 reports must be submitted from a NABL accredited laboratory. BIS certificate for driver as well as the luminaire must be submitted for records. Driver and luminaire shall be of same make. |
| 196 | Supply, Installation, Testing and Commissioning of maximum 18W surface mounted (False ceiling mounted for Auditorium) High quality polycarbonate diffuser and PDC Al housing and PC diffuser for visual comfort Downlighter delivering >2000 Lumen, 6500K CRI>80, THD <10%,, Input voltage Range 140-270 VAC , EMI EMC Complient (as per CISPR 15). Replacable driver Luminaire driver both BIS Complient and having CRS ( R No ) L70B50 @ 50K Hrs, Power factor>0.95, IP20 protection, operating temperature range from 0 to 45 deg C, internal surge protection of 2.5kV. Manufacturer shall have inhouse lab approved by NABL or Ministry of Science of Govt of India. LM79 and LM80 reports must be submitted from a NABL accredited laboratory. BIS certificate for driver as well as the luminaire must be submitted for records. Driver and luminaire shall be of same make. |
| 197 | Supply, Installation, testing and commissioning of 10W LED MIRROR LIGHT |
| 198 | SITC of Exhaust Fan : 450 mm sweep Metal Body Copper motor |
| 199 | Supply and erecting of 48 inch (1200mm sweep) ceiling fan, double ball bearing type, , complete with all accessories. a) Cat A |
| 200 | Supply and erecting fan hook box ( 100 mm diameter or equivalent square size, 75mm deep) fabricated out of 16 SWG sheet steel with 10 m round bar hook bounded to RCC steel upto 50 mm length protruding on each side of the box, including painting with 2 coats of red oxide, complete as required. |
| 201 | Sub Head -IV- UPSSITC of UPS system comprising of 1 Nos. 5kVA ( 1 Phase input & 1 Phase output) units . The UPS should be double conversion; online DSP Technology based IGBT Rectifier and inverter with 90 min backup. The UPS should have internally fitted with SNMP interface that will provide real time status information. The batteries should be sealed maintenance free The package shall include battery bank, stands, cables between UPS and battery bank, interconnecting links and related accessories as per specifications.5 kVA ( 1 Phase input & 1 Phase output) with 90 min backup |
| 202 | ELV WorkSub Head -V STRUCTURED CABLING SYSTEM PASSIVESITC of CAT 6A UTP LSZH Cable, 23 AWG solid copper conductors in accordance to TIA/EIA 568 C.2 (Category 6a) & ISO/IEC 11801 2nd ed(Class Ea), UL Approved, tested @500 Mhz, with HDPE insulation of individual conductor and over all Dia of 7.2 mm for Connectivity of Hub room to End Point. Grey Color |
| 203 | SITC of CAT 6A UTP Universal (both tool & toolless) information outlet (I/O) in accordance with ANSI TIA 568 C.2, IEC 60603-7-4 2nd Edition, ISO/IEC TR 11801-9901-2014, ROHS Compliant. The I/O should have minimum 750 mating cycle and 200 insertion cycle and UL approved,for Data, Voice, & Wi-Fi at user end. |
| 204 | SITC of loaded 24 port CAT 6A UTP, Transparent shutter jack panel, 1U height, UL-94V-0, Black with cable support bar, clear label marks and earthing plug for CAT6A cable termination at rack end. |
| 205 | SITC of CAT 6A UTP, LSZH Patch Cord as per ANSI/TIA/EIA 568C.2 and UL 94-V-0, ROHS Compliant, patch cord 1 Mtr for rack side switch to jack panel connectivity. |
| 206 | SITC of CAT 6A UTP, LSZH Patch Cord as per ANSI/TIA/EIA 568C.2 and UL 94-V-0, ROHS Compliant, patch cord 2 Mtr for rack side switch to end user connectivity. |
| 207 | SITC of 1, 2 and 4 port face plate, British Style with Shutter, 2 Plate system clear finish with transparent labelling, ABS-UL94-V2, ROHS Compliant, in accorandce with standards like ANSI/TIA-568-C.2, ISO/IEC 11801:2002 AMMD.2:2010, YD/T 926.3-2009 & ISO/IEC 60603-7 white for I/O fixing at user side. |
| 208 | Supply & Installation of 6 U Wall mount rack with fans , 2 cable managers , satationary shelf , 2 Nos. of hardware pkts. |
| 209 | Supply & Installation of 42 U floor mount rack with fans , 2 cable managers , satationary shelf , 2 Nos. of hardware pkts. |
| 210 | Sub Head- VI- LOCAL AREA NETWORK ( LAN )Supply, Installation, Testing & Commissioning of 24 Port POE+ Access Switches with switching capaticy of 128 Gbps, forwarding performance 95 Mpps, minimum PoE budget of 350W, with 2x 10G SFP+ uplink ports. Should support for Stacking/VC with stacking bandwidth of maximum 40 Gbps as and when required. Should support min 2GB internal DRAM, 2GB internal Flash memory, 16K MAC address. Should have Static Routing , Neighbor discovery, system logging, Telnet, SSH, SNMP, Network Time Protocol (NTP), Domain Name System (DNS) and IPv6 features from day 1 and should support OSPF, VRRP, OSPFv3 and PIM with 1 year support. |
| 211 | Sub Head: VII CABLES, EARTHINGS, EXTERNAL AND OTHER MISCELLENEOUS WORKSSupply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.3 1/2 Core 120 sq.mm |
| 212 | Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.3 Core 4 sq.mm |
| 213 | Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.(6) 3 1/2 x 120 Sq. mm. |
| 214 | Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.(2) 3 x 4 Sq. mm. |
| 215 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required.(b) In rocky strata |
| 216 | Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosure with CI/RCC cover having locking/Lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. c)Watering GI pipe, 20mm, Class B, with funnel as per specs. d) Charcoal/salt as per specs ( paid seperately). e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft black agriculture soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe.g)watering arrangement(plumbing will be paid seperately).(b) In rocky strata |
| 217 | Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosure with CI/RCC cover having locking/lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. c)Watering GI pipe, 20 mm Class B, with funnel as per specs. d) Charcoal/salt as per specs ( paid seperately). e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft black agriculture soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. g)watering arrangement (plumbing will be paid seperately).(b) In rocky strata |
| 218 | Providing and fixing 25 mm x 5 mm copper strip on surface r in recess for connections etc. as required. |
| 219 | Providing and fixing 6 SWG dia GI wire on surface or in recess for loop earthing as required. |
| 220 | External Lighting PanelSupply, assembly, erection, connecting, testing & commissioning of LT weather proof dust and vermin proof, outdoor feeder pillar, fabricated out of suitable sized angle iron and flats and covered with 3mm thick CRCA sheet steel including canopy, duly stove enamel painted, both sides (front and rear) openable with locking arrangement, rubber gasket cable glands, etc. Bakelite phase separators and bus bar supports including RCC 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) foundation, 450 mm deep and 150 mm above the ground. The feeder pillars shall be complete with 3 phase and neutral bus bars of capacities as described below and moulded case circuit breakers (MCCBs) with adjustable overload relay, copper FRLS control wiring with 1.5sq.mm, complete in all respects as per specifications as required.INCOMING:-63A 4P MCCB (25ka) with thermal magnetic release & rotary handle - 1no.3 Phase and neutral (100%N) aluminium bus bars of 150/ 100 amps. Capacity.OUTGOING:-70 AMP. TP CONTACTOR WITH NO/ NC CONTACTS -1 set.24 HOUR TIMER - 1 set.16A DP MCB (10ka) - 7 nos.16 AMP. SWITCH & SOCKET - 1 no. with in the feeder pillar.External Lighting Panel as above |
| 221 | SITC of IP65 rated ground mounted bollard light fixture, housing made of high-pressure die cast aluminium body . Colour tolerance ,3 SCDM to avoid color deviation.All the LED to be tested LM80 test method.light fixture, extra safety impact resistant, toughened glass, high efficiency optical system. High grade silicon gasket- heat and cold resistant. Coro safe high grade anodizing, \\"Duracoat\\" double layer body coating to withstand corrosion. and \\"weatherprotect\\" outdoor rated powder coating. IP65 protection is required to immersion in rainy season.All exterior parts are made of stainless steel. Luminaire must have built- in LED driver. luminaire having Maximum 12W, Delivered lumen 1100Lm , Beam: 115x155 degree.Height should be 600mm max and Width 80mm, Arm should be 151mm. CRI>80 LED color temperature 3000K.To prevent from capillary action Luminare must contains M16 cable gland other accessories like IP68 connector from every electrical joint. |
| 222 | Supply and fixing in position 1000mm wide checkered rubber matting of 11KV grade as per electricity rules,with thickness not less than 12mm. |
| 223 | Supply and fixing in position the best quality L.T. Danger Notice plate of 200mm x 150mm,made of mild steel atleast 2mm thick and vitreous enamelled, white on both sides and with inscription in signal red colour on front side written in English & Hindi as required. |
| 224 | Supply and fixing in position the approved shock treatment / restoration charts written in Hindi and English duly framed in teak wood frame and covered with 2.8mm glass as required. |
| 225 | Supplying and fixing of fire buckets 5 Nos.in each set of approved quality, red painted from outside and white from inside conforming to IS : 2546/1974 with additional handle at the bottom, filled with fine sand and fixed on an angle iron frame as per the requirement of local authorities. |
| 226 | Supplying and fixing of MS pedestal stand suitable for supporting four buckets as required. |
| 227 | Supplying and fixing First Aid Box of 18 S.W.G. M.S sheet,painted as approved & prescribed by Indian Red Cross Society & as per attached specifications. |
| 228 | Supplying and fixing of caution Boards of 16 S.W.G. , M.S. sheet of 300 mm x 150mm size, duly painted & having \\"MAN ON LINE' & \\"DO NOT SWITCH ON' written in Red complete with hanging arrangement as required. |
| 229 | Supply and fixing in position the approved single line diagram framed in 1000 x 800 mm size glass framed and installed in main switch room. |
| 230 | Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required100 mm dia pipe Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 16, 2026
11:30 IST
Tender Published
Tender notice published.
Today
Sep 09, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Sep 16, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Today
Sep 23, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 7 daysSep 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysSep 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender