Tender For Balance Work Of Improving Disaster Resilience Of Lifeline Building Of Govt. Senior Secondary School (Boys) At Nagrota Bagwan Distt Kangra (Hp) (Sh:-Providing And Fixing Work In Doors, Windows And Aluminium Work Etc;)
Tender Value
Ref. Documents
Estimated cost
Bid Submission
25 Aug 2026
4 days left
EMD
24050
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Balance Work Of Improving Disaster Resilience Of Lifeline Building Of Govt. Senior Secondary School (Boys) At Nagrota Bagwan Distt Kangra (Hp) (Sh:-Providing And Fixing Work In Doors, Windows And Aluminium Work Etc;)
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing Second class teak wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) as per approved drawing, design and as directed by the Engineer-in-Charge, including carriage of material, within all leads, lifts of materials and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax excluding GST and any other taxes imposed by the Government. |
| 2 | Providing 40x5 mm Forty into five millimetre) flat iron hold fast 40 cm (Forty centimetre) long including fixing to frame with 10 mm (Ten millimetre) diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm (Thirty into ten into fifteen centimetre) 1:3:6 mix (One cement : Three coarse sand : Six graded stone aggregate 20mm (Twenty millimetre) nominal size complete as per approved drawing, design and as directed by the Engineer-in-Charge, including carriage of material, within all leads, lifts of materials and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax excluding GST and any other taxes imposed by the Government. |
| 3 | Providing and fixing 35mm (Thirty five millimetre) thick shutters of second class teak wood panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per approved drawing, design and as directed by the Engineer-in-Charge, including carriage of material, within all leads, lifts of materials and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax excluding GST and any other taxes imposed by the Government. |
| 4 | Providing and fixing coloured coated/ anodised aluminium work for doors, windows, ventilators and partitions in frame work with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etcetera Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax excluding GST and any other taxes imposed by the Government. |
| 5 | Providing and fixing coloured coated/ anodised aluminium work for doors, windows, ventilators and partitions in shutter work with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etcetera Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax excluding GST and any other taxes imposed by the Government. |
| 6 | Providing and fixing 12mm (Twelve millimetres) thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax excluding GST and any other taxes imposed by the Government. |
| 7 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc; complete as per the architectural drawings and the directions of Engineer-in-charge (Cost of aluminium snap beading shall be paid in basic item) with float glass panes of 5 mm (Five millimetre) thickness (weight not less than 12.50 kg/ sqm) complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax excluding GST and any other taxes imposed by the Government. |
| 8 | Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4mm (One point four millimetre) in both directions with wire of dia. 0.50mm (Zero point fifty millimetre) with 12mm (Twelve millimetre) mild steel U beading all complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax excluding GST and any other taxes imposed by the Government. |
| 9 | Providing and fixing 35mm (Thirty five millimetre) thick glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws all complete as per approved drawing, design and as directed by the Engineer-in-Charge, including carriage of material, within all leads, lifts of materials and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax excluding GST and any other taxes imposed by the Government. |
| 10 | Providing and fixing second class teak wood wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size complete as per approved drawing, design and as directed by the Engineer-in-Charge, including carriage of material, within all leads, lifts of materials and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax excluding GST and any other taxes imposed by the Government. |
| 11 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg (Thirty six kilogram to Eighty kilogram) and door width from 701 mm to 1000 mm (Seven hundred one to One thousand), with double speed adjustment with necessary accessories and screws etcetera; complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals, as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax excluding GST and any other taxes imposed by the Government. |
| 12 | Providing and fixing 150mm (One hundred fifty millimetres) nominal size bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete as directed by the Engineer-Incharge, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax excluding GST and any other taxes imposed by the Government. |
| 13 | Providing and laying 600x600mm (Six hundred inti Six hundred millimetre) nominal size of vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% (Zero point zero eight) and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (Twenty millimetre) thick cement mortar 1:4 (One cement : Four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three kilogram per square metre) including grouting the joints with white cement and matching pigments etc;complete as directed by the Engineer-Incharge, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax excluding GST and any other taxes imposed by the Government. |
| 14 | Providing and applying J.K. Birla white cement based putty of average thickness 1mm (One millimetre), of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including carriage of material within all leads, lifts and other incidentals as per approved drawing, design, specifications and as directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax excluding GST and any other taxes imposed by the Government. |
| 15 | Providing and fixing 300x16 mm (Three hundred into sixteen millimetre) aluminum sliding door bolts, ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with necessary nuts and screws etc. complete including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax excluding GST and all type of other taxes imposed by the Government. |
| 16 | Providing and fixing aluminum tower bolt (Barrel type), ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc; complete including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax excluding GST and all type of other taxes imposed by the Government. |
| 17 | 250x10 mm (Two hundred fifty into ten millimetre) |
| 18 | 200x10 mm (Two hundred fifty into ten millimetre) |
| 19 | 1500x10 mm (One hundred fifty into ten millimetre) |
| 20 | Providing and fixing aluminum handles, ISI marked,anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc;complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals, as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax excluding GST and any other taxes imposed by the Government. |
| 21 | 125mm (One hundred twenty five millimetre) |
| 22 | 100 mm (One hundred millimetre) |
| 23 | Providing and fixing 200mm (Two hundred millimetres) bright finished hard drawn hooks and eyes complete as per approved drawing, complete and as per direction of Engineer- Incharge, including carriage of materials within all leads, lifts and other incidentals, as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax excluding GST and any other taxes imposed by the Government. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender