Tender For External Electrical Works For Construction Of Group Vocational Training Center (Gvtc) At Jagannath Area Of Mcl.
Tender Value
1.44 Crore
Estimated cost
Bid Submission
07 Sep 2026
14 days left
EMD
1.81 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anugul → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for External Electrical Works For Construction Of Group Vocational Training Center (Gvtc) At Jagannath Area Of Mcl.
BOQ
| Sl. No. | Item Description |
| 1 | 11 KV, 1 Panel H.T. Board (Isolator Panel) Supplying/Receiving, Installation, testing and commissioning of HT Panel Board suitable for indoor installation for use on 11 KV, 50 C/S earthed system having at 11 KV comprising 630A, 26.3KA/3 sec, IAC-AFLR-26.3KA/1sec VCB circuit breaker Panel shall be equipped with following accessories and as per specifications and schematic drawing. Panel, VCB, relay, meters must be of smae make for better life cycle optimization. as per TPS enclosed in NIT |
| 2 | 11KV OUTDOOR UNITISED SUB-STATION (PSS TYPE)Supplying/Receiving, Installation, testing and commissioning of 11KV OUTDOOR UNITISED SUB-STATION as per SLD.PSS enclosure, RMU, Vacum Interrupter, ACB shall be of same make and License partner, Authorized system house make PSS are not accepted. PSS Enclosure must be type tested for 21KA/1sec with IAC-A&B classification as per TPS enclosed in NIT |
| 3 | Supplying of the following sizes of 11 KV Alum. (E), Armoured XLPE HT power cable as per IS7098(part-2)-1985 amended uptodate, as per specifications. 11 KV (E), 3C x 240 Sq. mm XLPE Aluminium cable Armoured |
| 4 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Above 120 sq. mm and upto 400 sq. mm |
| 5 | Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required: 240sqmm |
| 6 | Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required: 240sqmm |
| 7 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required: 200 mm dia (OD-200 mm & ID-175 mm nominal) |
| 8 | Supplying/Receiving, Installation, testing and commissioning of Main LT Panel-01 as per TPS attached |
| 9 | Supplying/Receiving, Installation, testing and commissioning of ESSENTIAL PANEL as per TPS attached |
| 10 | Supplying/Receiving, Installation, testing and commissioning of CAPACITOR PANEL 125 KVAR as per TPS attached |
| 11 | Supplying of XLPE/PVC insulated sheathed (Heavy duty) armoured electric cable with aluminium conductor. |
| 12 | 3.5 core, 240 sq. mm |
| 13 | 3.5 core, 185 sq. mm |
| 14 | 3.5 core, 35 sq. mm |
| 15 | 4 core, 16 sq. mm |
| 16 | 4 core, 10 sq. mm |
| 17 | 4 core, 6 sq. mm |
| 18 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. |
| 19 | 3½ X 240 sq. mm (62mm) |
| 20 | 3½ X 185 sq. mm (57mm) |
| 21 | 3½ X 35 sq. mm (32mm) |
| 22 | 4 X 16 sq. mm (28mm) |
| 23 | 4 X 10 sq. mm (25 mm) |
| 24 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. |
| 25 | Above 95 sq. mm and upto 185 sq. mm |
| 26 | Above 185 sq. mm and upto 400 sq. mm |
| 27 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required. |
| 28 | Upto 35 sq. mm (clamped with 1mm thick saddle) |
| 29 | Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp) |
| 30 | Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp) |
| 31 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. |
| 32 | 450 mm width X 62.5 mm depth X 2.0 mm thickness |
| 33 | 900 mm width X 62.5 mm depth X 2.0 mm thickness |
| 34 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \\"bends\\" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. |
| 35 | 450 mm width X 62.5 mm depth X 2.0 mm thickness |
| 36 | 900 mm width X 62.5 mm depth X 2.0 mm thickness |
| 37 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \\"Tee\\" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. |
| 38 | 450 mm width X 62.5 mm depth X 2.0 mm thickness |
| 39 | 900 mm width X 62.5 mm depth X 2.0 mm thickness |
| 40 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required |
| 41 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 42 | Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required. |
| 43 | Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm |
| 44 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm |
| 45 | Supplying/Receiving, Installation, testing and commissioning of Feeder Pillar as per TPS attached |
| 46 | Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 6.5 metre and upto 8.0 metre |
| 47 | Supply erection of 7 metre height Hot-dip galvanized octagonal street light pole with following arm with top dia 70 mm and bottom dia A/F 155 mm, made of 3 mm thick sheet along with base plate of size 260 X 260 X 16 mm , small door opening for junction box mounting with MCB & connector with 2.5 sq mm copper wires, cement concrete of 1:3:6 including excavation, refilling and suitable size foundation bolts with template and all complete job as required. |
| 48 | Single arm, 1500 mm with pole |
| 49 | Double arm, 1500 mm with pole |
| 50 | Supplying and fixing of 60 Watt New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LEDs as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07.Complete with all fixing accessories as required. Ref. HAVELLS : ENDURAOMNIPLUSSL60WLED757SASYTOPC or apporoved equivalent. |
| 51 | Supplying and fixing of 72 Watt LED Light Column spreads uniform lighting all around the pathway. 3 meter height in cylinderical shape.complete with all fixing accessories as required.Ref. HAVELLS : GRANDEURCLS72W857PSYMBOPC or apporoved equivalent. |
| 52 | Supplying and fixing of 100 Watt LED HIGHBAY Next generation, energy saving, environment friendly & robust highbay LED with PDC housing suitable for ceiling (Surface/Suspended) mounting with system efficacy upto 150 lm/W..complete with all fixing accessories as required.HAVELLS : SAUCERGENXPROHBP100WLED757P90DBOLTG or apporoved equivalent. |
| 53 | Supply of 2 core, 6 sq. mm XLPE/PVC insulated sheathed (Heavy duty) armoured electric cable with aluminium conductor. |
| 54 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 2 x 6 Sq.mm (19mm) |
| 55 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ metal pipe as required. Upto 35sqmm |
| 56 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 57 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering watering pipe 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 58 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required |
| 59 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 60 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 61 | Supplying/Receiving, Installation, testing and commissioning of DG SET WITH PLC BASED AMF PANEL as per TPS attached |
| 62 | Providing and fixing MV. danger notice plate of 200 mm X 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required |
| 63 | Providing and fixing H.T. danger notice plate of 250 mm X 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required |
| 64 | Supply of PVC insulated, PVC sheathed (0.61 mm) multicore unarmored telephone cables in ground/existing pipe, of the following sizes: 20 Pair (Telephone Cable) |
| 65 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ metal pipe as required. Upto 35sqmm |
| 66 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 67 | Total impact of GST plus Labour Cess [@ 1 % (BOCW Cess to be deducted from the RA bill as per the value of the work progress)] for the purpose of CTC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender