Tender For Supply, Erection, Testing And Commissioning Of Material/Equipment For Laying Of 33 Kv Up Gradation Xlpe 3*300 Sqmm Cable 1.00 Km (1+1) From 33/11 Kv Gss Nph To Concore Depot In Front Of Gwd Premises, Nph Road For Release Of New Ht Connecti
Tender Value
82.85 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
7 days left
EMD
1.65 Lakhs
Bank guarantee accepted
Document Fee
2950
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jodhpur → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply, Erection, Testing And Commissioning Of Material/Equipment For Laying Of 33 Kv Up Gradation Xlpe 3*300 Sqmm Cable 1.00 Km (1+1) From 33/11 Kv Gss Nph To Concore Depot In Front Of Gwd Premises, Nph Road For Release Of New Ht Connection, Under Aen(B-Iii) Jdvvnl, Jodhpur City Circle, Jodhpur Discom, Jodhpur, Against Deposit Work Of Sr. Dee, Indian Railway On Turnkey Basis Under Tntw- 802.
BOQ
| Sl. No. | Item Description |
| 1 | Percentage BoQ BoQ_Ver3.0 Percentage Normal INR Only INR Select, At Par, Excess (+), Less (-) IOCL Tender Inviting Authority: Superintending Engineer(TW), Jodhpur Discom, Jodhpur Name of Work: “Supply, erection, testing and commissioning of material/equipment for Laying of 33 KV U/G XLPE 3*300 Sqmm Cable 1.00 KM (1+1) from 33/11 KV GSS NPH to Concore Depot in front of GWD premises, NPH road for release of new HT connection, under AEN(B-III) JdVVNL, Jodhpur City Circle, Jodhpur Discom, Jodhpur, against deposit Work of Sr. DEE, Indian Railway on Turnkey basis” under TNTW- 802. Contract No: TNTW-802 Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE FOR SUPPLY OF MATERIAL & EQUIPMENT(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # S.No. Item Description Item Code / Make Quantity Units Base Rate in Rs./unit (Unit Supply Rate Inclusive of All Components & taxes, duties, transportation etc.) as per SIR April' 2026 Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Total GST Amount @18% VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes inRs. P TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | A. 33KV New line in KM ( 1.00 KM U/G CABLE(1+1)) |
| 3 | Supply of 33 KV Lattice Structure 36' LONG WITH CROSS ARMS WITH NUT BOLT SINGLE CIRCUIT |
| 4 | Supply of M.S. Rod Type Earthing Set |
| 5 | Supply of G.I.Earth wire 6 SWG (5 mm) |
| 6 | Supply of 33 KV 300 SQ MM XLPE Cable (Armoured) |
| 7 | Supply of 33 KV XLPE Cable Box Joining Kit 3x300 SQ MM Outdoor |
| 8 | Supply of 33 KV XLPE Cable Box 3X 300sq. mm H.S S.T. JOINT |
| 9 | Supply of M.S, Nuts & Bolts, size, 16 mm(Assorted length) |
| 10 | B. 01 BAY proposed at concore Depot |
| 11 | Supply of M. S. ANGLE IRON 65 x 65 x6 mm SAIL |
| 12 | Supply of M. S. ANGLE IRON 50 x 50 x6 mm SAIL |
| 13 | Supply of 11 KV Disc Insulator (T&C) Type |
| 14 | Supply of 11 KV Hardware Set for (T&C) Type |
| 15 | Supply of 33 KV GO double break without EB Isolator (with 18 x 24 KV Post Insulator ) 800 Amp. |
| 16 | Supply of 30 KV 10 KA Station class |
| 17 | Supply of ACSR PANTHER |
| 18 | Supply of M.S. Rod Type Earthing Set |
| 19 | Supply of G.I.EARTH WIRE 6 S.W.G. (5 mm) |
| 20 | Supply of P.G.CLAMPS FOR PANTHER |
| 21 | Supply of P.G.CLAMPS FOR PANTHER |
| 22 | Supply of M.S, Nuts & Bolts, size, 16mm (Assorted length) |
| 23 | Note-(1)The unit base rate for supply of material mentioned in column No. 5 is inclusive of GST @ 18% and freight, insurance & transportation charges of all items (2) The sucessful bidder shall furnish price break up in format provided by this office with acceptance of LoI. (3) 01 Nos. of 33 KV VCBs shall be supplied by Nigam as free issue item. Total in Figures 5565570.85 6006925.11 INR Sixty Lakh Six Thousand Nine Hundred & Twenty Five and Paise Eleven Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 INR Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
| 24 | A. 33KV New line in KM ( 1.00 KM U/G CABLE(1+1)) |
| 25 | Conducting route survey as per approved route map and pegging of route with tee off point section point & double pole locations. |
| 26 | (2.3) Excavation of pit in ordinary rock ( Where blasting is not required) to erect various supports and stay sets including stacking of excavated muck from the edge of excavation/pit. |
| 27 | 36 feet long Lattice tower of size 1.5mx1.5m x1.8 m deep |
| 28 | (5.1) Erection of all type of steel supports in the excavated pit in alignment after checking the same with plumb line including fixing of cross arms and top hamper before erecting the supports. The support should be grouted and muffed in cement concrete of ratio 1:3:6 as per item No. 5.7 the remaining portion of the pit will be back filled with soil. The cost muffing and grouting will be paid extra. |
| 29 | Lattice Structure |
| 30 | (5.5) Erection & fixing of steel struts in the excavated pit in position.The top end of the strut will be properly holed/welded with the main support muffed in cement concrete of ratio 1:3:6 as per item No.5.7.The nuts and bolts will be provided by the contractor as per Nigams specification for which payment will be made at the prevailing store issue rate.The cost of muffing and grouting will be paid extra. |
| 31 | Providing and laying of cement concrete in ratio 1:3:6 using 43 grade cement,river sand and 12 mm to 20 mm graded blast crusher broken in pit/foundation according to the size/type of supports/stay set including compaction/curing for 21days in steel plates shuttering /farmer base. |
| 32 | (6.16)Assembly. Installation & commissioning of gang operated isolating switch on erected structure with setting for accurate operation including fixing of allied accessories completein all respect with post insulator and jumpering on both ends for connection with the system. |
| 33 | (B)G.O. switch . without earthing blade. |
| 34 | 33kv G.O.switch |
| 35 | Earthing of line for all type of supports as per REC construction standards using Stay wire/GI wire with one pcs.of M.S.rod 20mm dia each 3 meter long and driving into earth by mechanical means as per approved design.Drawing &specification.All material except MS rod,MS flat & stay wire will be supplied by the contractor.If material is supplied by the contractor ,the payment will be made as per prevailing Discom store issue rates.(In case of PCC poles earthing must be connected with earthwire already available on PCC pole at bottom) |
| 36 | (11.11) Providing and fixing of G.I. Pipe B-Class (IS:1239 marks) at the starting and finishing point of 33 & 11 KV under ground cables and to lay & clamp vertically with the existing support including labour charges. |
| 37 | Providing and fixing of G.I. Pipe of 150 mm diameter. B-Class (IS:1239 mark),at the starting and finishing point of 33 KV under ground cables and to lay & clamp vertically with the existing support including labour charges. |
| 38 | (12.1) Painting with priming coats or ready mixed red-oxide paint 2 coats of approved make on steel works after cleaning with wire brush / sand paper.(including cost of red oxide) |
| 39 | On new surface |
| 40 | (12.2) Painting with aluminium paint of approved brand and manufacturer to give an even surface.(including cost aluminium paint) |
| 41 | On new works with two coats. |
| 42 | (20.5) Laying of two ( D/C) 33KV, XLPE (Aluminium conductor) underground cables w/o overlapping as per relevant IS/ JdVVNL standard including excavation of 50 cm width x 120 cm deep trench in Kaccha land.25 cm thick under layer of sand. 'A' class bricks or concrete block covering refilling soil in the remaining portion and providing/fixing cable route indicators at every 30Mtr.of cable and at every turn. |
| 43 | 3x 240 Sq mm to 3x400 Sq mm |
| 44 | (20.6) Laying of 33 KV & 11KV XLPE cable without Road cutting i.e. through burrowing machine \\"VERMIER\\".(120 cm deep).Use of this technology must be restricted to the situation like:- |
| 45 | (i) When the passages available for laying the proposed cable is totally a metal or cement concrete road.ii) When the road cutting is not permitted by the local administration. |
| 46 | (II) Outdoor end terminal 3x240 Sq mm to 3x400 Sq mm |
| 47 | (20.7) Intallation of 33 KV Cable (XLPE) termination / straight through joints ( Heat shrinkable type) as per manufacturer's kit guidance and direction including preparation of cable and testing refilling etc as required.(Including crimping of lugs) |
| 48 | (20.7)(iii) When cable laid in a HDPE pipe |
| 49 | A) 33 / 11 KV 3C x 300 Sq.mm cable |
| 50 | (20.7.1) Add Cost of 200 HDPE pipe |
| 51 | A)(a) PN4 HDPE pipe(IS-4984) |
| 52 | (20.12) Installation of straight through joints on HT XLPE Insulated Cable with straight through joint including required removal / fixing / refixing/ testing etc. as required. (Without excavation) |
| 53 | 3X240 Sq.mm to 3X400 Sq.mm |
| 54 | (20.14) For Extra Loop (Ghera) to be provided near the pole on termination point and the length of cable along the pole for mounting of cable jointing kit. |
| 55 | 3X240 Sq.mm to 3X400 Sq.mm |
| 56 | B. 01 BAY proposed at concore Depot |
| 57 | (2.11) Masonry for foundation and plinthCalculation: (T/F(2.4x2.4x1.1)+ Kiosk(3x1.5x0.6)) |
| 58 | Fixing of 11kv B&S/T&C type disc insulator for 33kv lines (each unit consiting of 3 nos .disc.& 1set of H/W) on terminal point including fixing of hardware and strips. |
| 59 | (6.16)Assembly. Installation & commissioning of gang operated isolating switch on erected structure with setting for accurate operation including fixing of allied accessories completein all respect with post insulator and jumpering on both ends for connection with the system. |
| 60 | (B)G.O. switch . without earthing blade. |
| 61 | 33kv G.O.switch |
| 62 | (6.19)Installation of lightening arrestors on erected structure /support (1 nos) including connection with earth by wire /strip as required and jumpering etc. |
| 63 | (A)sub-station type |
| 64 | 33 KV L.A.(each) |
| 65 | (6.24) Laying, testing termination of control cable 1100 volts PVC insulated including supply and installation of ferrules to designate various cores of control cables by terminal Nos. of identification including utilization of cable gland. The control cable should be clearly arranged in trenches avoiding crossings including clamping of control cable at regular interval and providing identify tags. |
| 66 | Fixing of PG clamp of Panther Conductor |
| 67 | (10.1)Erection of PCC poles in excavated pit in alignment after checking the same with plumb line as per approved design & drawing of 33/11kv sub-station.The pit should be back filled with the soil with proper ramming below 30cm ground level and then muffed above 15cm average ground level with cement concrete ratio1:3:6.The charges for muffing will be paid extra as per chapter no 5.7 The nuts & bolts will be supplied by the contractor for which payment will be made at the prevailing store issue rates. |
| 68 | Fabricated structure AB type |
| 69 | (10.3) Laying / stringing of bus bar with ACSR Dog & jumper connection using tie rod ,33KV /11KV insulator strings,required hardware,P.G.clamps/T clamps etc.as per requirement including Y-connections at bus bar jumpering point as per the direction of engineer in-charge. |
| 70 | ACSR PANTHER |
| 71 | (11.1) Erection of OCB/Kiosk/VCB complete with accessories including use of special tools & conducting all pre-commissioning test before energization,filling oil etc. complete in all respect with erection & grouting of structure (excluding civil works). The relays will be tested by Discom. |
| 72 | 33 KV VCB/SF-6 Breaker |
| 73 | (12.1) Painting with priming coats or ready mixed red-oxide paint 2 coats of approved make on steel works after cleaning with wire brush / sand paper.(including cost of red oxide) |
| 74 | On new surface |
| 75 | (12.2) Painting with aluminium paint of approved brand and manufacturer to give an even surface.(including cost aluminium paint) |
| 76 | On new works with two coats. |
| 77 | (14.2) Fabrication of steel structures of M.S angle ,M.S.channel & M.S.Flat including cutting ,drilling and continunous welding joint as per design and drawing. |
| 78 | Other steel items |
| 79 | Note-1.GST shall be paid only on production of GST Invoices. INR Tender Inviting Authority: Superintending Engineer(TW), Jodhpur Discom, Jodhpur Name of Work: “Supply, erection, testing and commissioning of material/equipment for Laying of 33 KV U/G XLPE 3*300 Sqmm Cable 1.00 KM (1+1) from 33/11 KV GSS NPH to Concore Depot in front of GWD premises, NPH road for release of new HT connection, under AEN(B-III) JdVVNL, Jodhpur City Circle, Jodhpur Discom, Jodhpur, against deposit Work of Sr. DEE, Indian Railway on Turnkey basis” under TNTW- 802. Contract No: TNTW-802 Name of the Bidder/ Bidding Firm / Company : ABSTRACT OF PRICE SCHEDULE FOR SUPPLY OF MATERIAL & EQUIPMENT(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name only ) |
| 80 | Description |
| 81 | Quoted Rate in BoQ-1 SUPPLY OF MATERIAL & EQUIPMENT |
| 82 | Quoted Rate in BoQ-2 ERECTION OF MATERIAL & EQUIPMENT Quoted Rate in Figures 0.0 Quoted Rate in Words INR Zero Only + |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysSep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender