Tender For Construction Of Ers Stockyard Inside 132/33 Kv Grid S/S,Optcl,Chatrapur (Including Heightening Boundary Wall Heightening And Safety Fencing Near Store)
Tender Value
14.56 Lakhs
Estimated cost
Bid Submission
05 Sep 2026
13 days left
EMD
14600
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganjam → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Ers Stockyard Inside 132/33 Kv Grid S/S,Optcl,Chatrapur (Including Heightening Boundary Wall Heightening And Safety Fencing Near Store)
BOQ
| Sl. No. | Item Description |
| 1 | Supplying all labour for dismantling brick masonry including stacking of useful material for reuse and removal of debris within 50m initial lead including cost,conveyance,royalties & taxes of all labour with T & P required etc complete as per direction of Engineer in charge |
| 2 | Earthwork in excavation in hard soil on foundation trenches in all kinds of soil including moorum stony earth and earth mixed with boulder except sheet rocks and boulders requiring blasting including dressing and leveling the bed up to the required depth and depositing the excavated materials with all leads and lifts T&P shoring and shuttering , dewatering if required etc complete including cost,conveyance,taxes of all labour with T&P required etc complete as per the direction of the Engineer in charge. |
| 3 | Supplying all labour with T&P for filling foundation and plinth with sand including watering, ramming etc comolete including cost , conveyance , royalties and taxes of all materials and cost of all labour with T&P required for the work etc complete (measurement will be taken on finished & complete section only) as per the direction of the Engineer in charge. |
| 4 | Cement concrete with (1:3:6) in foundation and floors using 40 mm ( 1 ½ ‘’) size black hard crusher broken granite stone metal of approved quality from approved quarry including lower laying concrete watering and curing etc complete to required level laid in layers not exceeding 150 mm ( 6’’) thick including cost, conveyance, royalties and taxes of all materials and cost , conveyance of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge. |
| 5 | Cement concrete with (1:1.5:3) in foundation and floors using 12 mm to 20 mm size black hard crusher broken granite stone chips of approved quality from approved quarry including lower laying concrete watering and curing etc complete to required level laid in layers not exceeding 150 mm ( 6’’) thick including cost, conveyance, royalties and taxes of all materials and cost , conveyance of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge. |
| 6 | RCC (1:1.5:3) M20 grade in in following RCC members having a minimum compressive strength 20N/mm2 including centering, shuttering and finishing the exposed surfaces smooth providing grooves or beads where necessary including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc complete in all respects but excluding the cost of M.S. rods or tor steel and binding wires and labour charges for cutting, bending, binding and tying the grills etc complete as per the direction of the Engineer - in – charge. |
| 7 | F & P |
| 8 | Col and beam in F & P |
| 9 | Col and beam In SS |
| 10 | Slab over drain |
| 11 | Supplying,fitting,fixing of MS rod or tor steel including straightening ,cutting, bending, binding by using binding wire of18-20 gauze , molding, welding, jointing if necessary and placing in position as per drawing & technical specification ( Payment shall be made on weight of M.S. Rod & Tor steel only and no separate payment will be made towards the weight of binding wires) including cost,conveyance, royalties and taxes of all materials and cost, conveyance,taxes of all labour T & P required etc complete as per direction of Engineer in charge. |
| 12 | First class brick masonry in cement mortar ( 1:6 ) in F & P using fly ash bricks of size (23 X 11 X 8 ) cm with dimensional tolerance (+or-) 8% and crushing strength not less than 75Kg/cm2 after immersing the bricks for six hours in water before use, including splays cutting,circular molding& corbeling,chamfering & similar such type of works,watering and curing etc complete including cost, conveyance, royalties and taxes of all materials & cost, conveyance, taxes of all labour with T&P required for the work etc. complete in all respect as per the direction of Engineer-in-charge. |
| 13 | First class brick masonry in cement mortar ( 1:6 ) in SS using fly ash bricks of size (23 X 11 X 8 ) cm with dimensional tolerance (+or-) 8% and crushing strength not less than 75Kg/cm2 after immersing the bricks for six hours in water before use, including splays cutting,circular molding& corbeling,chamfering & similar such type of works,watering and curing etc complete including cost, conveyance, royalties and taxes of all materials & cost, conveyance, taxes of all labour with T&P required for the work etc. complete in all respect as per the direction of Engineer-in-charge. |
| 14 | 16 mm thick cement plaster with cement and sand mortar (1:6 ) finished smooth on masonary work with watering and curing including cost, conveyance, royalties and taxes of all materials and cost, conveyance of all labour with T&P required for the work etc complete in all respect s as per the direction of the Engineer in charge. |
| 15 | 12 mm thick cement plaster with cement and sand mortar (1:6 ) finished smooth over outside rough surfaces of brick masonry walls etc with watering and curing including cost, conveyance, royalties and taxes of all materials and cost, conveyance of all labour with T&P required for the work etc complete in all respect s as per the direction of the Engineer in charge. |
| 16 | Priming one coat with af approved quality of primer of Berger make including cost, conveyance and taxes of all materials & cost ,conveyance taxes of all labour with T & P required etc complete in all respect as per the direction of the Eng.-in-charge |
| 17 | Painting two coats with weather shield coat on wall surface with a paint of approved shade including cost, conveyance and taxes of all materials & cost ,conveyance taxes of all labour with T & P required etc complete in all respect as per the direction of the Eng.-in-charge |
| 18 | Supplying all labour with t & P required for removal of excess earth by mechanical means up to a distance of 5 KM including cost taxes of all labour with T & P required etc complete in all respect as per direction of EIC. |
| 19 | Supplying all labour with t & P required for lifting and removing structural members from site by using 3 tonnes cranes / hydra/ any other lifting machines including cost taxes of all labour with T & P required etc complete in all respect as per direction of EIC. |
| 20 | Supplying all material and labour required for providing centering and shuttering works in F & P etc complete including cost, conveyance royalties and taxes of all materials and cost of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge. |
| 21 | Supplying all materials for making M.S angle sections of approved design and specification with all cost, taxes etc. complete and labour for fitting and fixing in position steel cutting edge as per approved design using M.S. Angles, plates, bolts and nuts complete including cutting angles to required size, bending to shape, drilling holes, reverting and welding etc. complete in all respects as per the direction of the Engineer in charge. |
| 22 | Providing and fixing concentina coil fencing with punched tape concentina coil 600 mm dia 10 mtr. Openable length (total length 90 M), having 50 nos. rounds per 6 M length, upto 3 M height of wall with existing angle iron 'Y' shaped placed 2.4 M or 3.00 M apart and with required nos of horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per the direction of Engineer - in - charge, with reinforced barbed tape (R.B.T)/ spring core (2.5 mm thick) wire of high tensile strenth of 165 Kg/Sq. mm with tape (0.52 mm thick) and weight 43.478 gm/meter (cost of M.S. angle, CC blocks shall be paid seperately) including cost, conveyance etc. complete. |
| 23 | Painting two coats with synthetic enamal paints to iron doors and windows with a paint of approved shade over a coat of primer including cost, conveyance and taxes of all materials & cost, conveyance taxes of all labour with T & P required etc complete in all respect as per the direction of the Eng.-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysSep 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender