Tender For Construction Of Kalyani Mandap At Deogaon
Tender Value
71.12 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
7 days left
EMD
71500
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jajapur → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Kalyani Mandap At Deogaon
BOQ
| Sl. No. | Item Description |
| 1 | Earth Work : AR0102aa (Earth work in hard soil or gravelly soil foundation & plinth within 50m. Initial lead and 1.5m initial lift) : Earth work in hard soil or gravelly soil foundation & plinth within 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per the direction of the Engineer-in-charge |
| 2 | Earth Work : AR0115 (Filling foundation and plinth with sand well watered and rammed) : Filling foundation and plinth with sand well watered and rammed including cost, conveyance, royalty, taxes of all materials, labours and T & P required for the work etc. complete and as per direction of Engineer-in charge. |
| 3 | Concrete : AR0304 (Cement concrete (1:4:8) with 4 cm. hard granite(Crusher Broken) metal) : Cement concrete (1:4:8) with 4 cm. hard granite(Crusher Broken) metal including laying in layers not exceeding 300 mm in depth, ramming, compacting to proper thickness, watering and curing for proper period with cost conveyance, royalty, taxes of all materials, labour and T&P required for the work etc. complete and as per direction of Engineer-in charge. |
| 4 | Masonry Brick Work : AR0603b (Flyash Bricks of size (25cm x 12cm x 8cm) in cement mortar (1:6) in foundation and plinth) : Brickwork with Flyash Bricks of size (25cm x 12cm x 8cm) in cement mortar (1:6) in foundation and plinth having crushing strength not less than 75.00 Kg/cm2 with dimensional tolerance ±8 percent immersing the bricks in water not less than six hours with cost conveyance, royalty, taxes of all materials, labor, and T&P required for the work, etc. complete and as per direction of Engineer-in-charge. |
| 5 | Masonry Brick Work : AR0603b (Flyash Bricks of size (25cm x 12cm x 8cm) in cement mortar (1:6) in foundation and plinth) : Brickwork with Flyash Bricks of size (25cm x 12cm x 8cm) in cement mortar (1:6) in foundation and plinth having crushing strength not less than 75.00 Kg/cm2 with dimensional tolerance ±8 percent immersing the bricks in water not less than six hours with cost conveyance, royalty, taxes of all materials, labor, and T&P required for the work, etc. complete and as per direction of Engineer-in-charge. |
| 6 | R.C.C. Work : AR0404Aa (Reinforced cement concrete work of M-20 grade with 20mm & down grade size black hard crusher broken granite chips) : Reinforced cement concrete work of M-20 grade with 20mm & down grade size black hard crusher broken granite chips including hoisting and laying in position compacting to specified design section and curing for proper period with cost conveyance, royalty,taxes of all materials, labour and T&P required for the work etc. (including centring and shuttering) complete and as per direction of Engineer-in charge (RCC foundation, footing bases of column, mass concreate, pre-cast slabs etc.) |
| 7 | Plinth bend) |
| 8 | Lintel Band |
| 9 | Chajja |
| 10 | Column & Roof beam |
| 11 | RCC Stair |
| 12 | R.C.C. Work : AR0409 (Supplying, fitting, and placing uncoated HYSD bar reinforcement including labor charges for cutting, bending, binding, and tying the grills and placing in position) : Supplying, fitting, and placing uncoated HYSD bar reinforcement including labor charges for cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge with cost of steel rod and as per drawing, design, and direction of Engineer-in-charge. |
| 13 | 2.5 cm thick grading concrete (1:2:2) on roof slab with 6 mm size hgcb chips including cost, conveyance, royality, taxes, watering& curing etc. complete. |
| 14 | Plastering : AR1014 (16mm thick cement Plaster in CM (1:6) over brick work in inside.) : 16mm thick cement Plaster in CM (1:6) over brick work in inside including racking out joints finishing smooth with proper plumb and line, curing for proper period with cost conveyance, royalty, taxes of all materials, labour and T & P required for the work etc comp.and as per direction of Engineer-in-charge. |
| 15 | Plastering : AR1004i (12mm thick cement plaster (1:6) over Brick work in outside.) : 12mm thick cement plster (1:6) over Brick work in outside including racking out joints finishing smooth with proper plumb and line curing for proper period with cost conveyance, royality, taxes of all materials, labour and T & P required for the work etc. comp.and as per direction of Engineer-in-charge. |
| 16 | Plastering : AR1027 (6mm thick cement Plaster in CM (1:4) over R.C.C. surfaces including chipping (Inside)) : 6mm thick cement Plaster in CM (1:4) over R.C.C. surfaces in inside including chipping with proper level and line, curing for the proper period with cost conveyance, royalty, taxes of all materials, labor, and T & P required for the work, etc comp. and as per the direction of the Engineer-in-charge. |
| 17 | Flooring : AR0817aa (Fixing Vitrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mmx600mm plain (Ivory) in dados skirting and risers of steps on 12mm thick cement plaster (1:3)) : Fixing Vitrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mmx600mm plain (Ivory) in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the Vitrified tiles including rubbing and polishing complete including cost of precast tiles. |
| 18 | Flooring : AR0817ac (Fixing Vitrified industrial Tile of premium grade having thickness 8mm to 10mm confirming to IS 4457 of size 300mmx300mm in dados skirting and risers of steps on 12mm thick cement plaster (1:3)) : Fixing Vitrified industrial Tile of premium grade having thickness 8mm to 10mm confirming to IS 4457 of size 300mmx300mm in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the Vitrified tiles including rubbing and polishing complete including cost of precast tiles. |
| 19 | Flooring : AR0816j (Fixing Chequred Tiles in floor , treads or steps and landing on a 25mm thick bed of cement mortar 1:1) : Fixing Chequred Tiles in floor , treads or steps and landing on a 25mm thick bed of cement mortar 1:1 (1cement: 1sand) jointed with neat cement slurry mixed with pigment to match the shades of the Chequred tiles including rubbing and polishing, cost of precast tiles complete as per direction of Enginer-in-charge. |
| 20 | Other Building Items. : AR1902 (cement based wall putty (water based)) : Finishing surface of walls with cement based wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes,labour,T&P,etc.complete. and as per the direction of Engineer in Charge. |
| 21 | Other Building Items. : AR1911 (Stainless steel of 304 grade in hand railing using 50mm dia of 2mm) : Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in staircase as per approved design and specification, buffing, polishing etc with cost,conveyance, taxes of all materials, labour,T&P etc. required for the complete in all respect. and as per direction of Engineer in Charge |
| 22 | Iron Work : AR1704 (Iron Doors and windows fixing) : Supplying, fitting & fixing of Mild steel and put up for frames & shutters of Doors and windows fixing in position with cost, conveyance, taxes of all materials, labours and T & P required for the work etc. as per direction of Engineer-in-charge. |
| 23 | Painting : AR0901b (Priming one coat in inner surface with primer of approved quality over iron work.) : Priming one coat in inner surface with primer of approved quality over iron work including cost conveyance, taxes of all materials, labor and T&P required for the work complete as per direction of the Engineer-in-charge. |
| 24 | Painting : AR0919 (Finishing wall One Coat with plastic emulsion paint of approved shades on old work (Inside)) : Finishing wall One Coat with plastic emulsion paint of approved shades on old work to give an even shade including all costs of labor, Paint and Brushes required for the work, etc. complete and as per direction of the Engineer-in-charge.(Inside) |
| 25 | Painting : AR0901d (Priming one coat with inner surface primer of approved quality water-bound primer over plastering surfaces (Inner surface)) : Priming one coat with inner surface primer of approved quality water-bound primer over plastering surfaces including cost conveyance, taxes of all materials, labor and T&P required for the work complete as per direction of the Engineer-in-charge. |
| 26 | Concrete : AR0307 (Cement concrete (1:2:4)with 12mm size hard broken granite chips per 1cum) : Cement concrete work with (1:2:4) using 12mm size hard granite(crusher broken) chips including hoisting and laying in position compacting to specified design section and curing for proper period with cost conveyance, royalty, taxes of all materials, labour and T&P required for the work etc. complete as per specificaion and direction of Engineer-in charge. |
| 27 | Painting : AR0918Ai (Finishing wall one coat with weather coat) : Finishing wall one coat with weather coat including all costs of labour, Paint, Primer and Brushes required for the work etc. complete and as per direction of Engineer-in-charge. |
| 28 | Other Building Items. : AR1920 (UPVC Window with 6 mm thick clear toughened glass) : Supplying, fitting and fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA/NCL VEKA LTD) Three Track -Three panel sliding window - 60 Series duly manfactured using UPVC reinforced profiles of 108mm x 45 mm x 2.5 mm for outer frames and winodw sash 39 mm x 58 mm x 2.5mm capable of mounting single glazing system structurally reinforced with hot dip glavanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window frame shall be fitted with 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant and the system is to be installed using Reinforced large coupler at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc, including cost and conveyance of all materials accessories, labour charges, materials and product conforming to ASTM D 638-14,EN-477-95 and other applicable codes and standards and as per direction of Engineer in Charge.(Rate given by Ofice of the Engineer-IN-Chief (Civil) Odisha Nirman Soudha Unit-V, Bhubaneswar vide letter no 20894 dated 26/05/2022) |
| 29 | Other Building Items. : AR1918 (UPVC Door with 12mm thick WPC Board) : Supplying, fitting and fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA/NCL VEKA LTD) casement Door - 60 Series duly manfactured using UPVC reinforced profiles of 60mm x 55 mm x 2.5 mm for outer frames, 102 mm x 60 mm x 2.25mm for casement door Sash Profile and 74 mm x 60 mm x 2.5 mm mullion profile capable of mounting single glazing system structurally reinforced with hot dip glavanised up to 50 microns of minimum thickness of 2.0 mm prefabricated & welded through fusion welding the door sash shall be fitted with 12mm thick WPC Board of green ply make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 no per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc, including cost and conveyance of all materials accessories, labour charges, materials and product conforming to ASTM D 638-14,EN-477-95 and other applicable codes and standards and as per direction of Engineer in Charge. (Rate given by Ofice of the Engineer-IN-Chief (Civil) Odisha Nirman Soudha Unit-V, Bhubaneswar vide letter no 16100 dated 08/05/2018) |
| 30 | Other Building Items. : AR1909 (Al. door with OEL anodized Al. door section of 9202 as vertical member) : Providing fitting, fixing of Al. door with OEL anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 12mm thick pre-laminated board fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle No.1855 including all cost of labour,T&P , hire charges of drilling machine, labour charges etc. complete. and as per direction of Engineer in Charge |
| 31 | R.C.C. Work : AR0410a (Centring & Shuttering for R.C.C. floor and roof slabs, landings,balconies, projecting sun shades and chajjas) : Rigid and smooth centring and shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials complete in ground floor R.C.C. floor and roof slabs, landings, balconies, projecting sun shades and chajjas up to 4.3m height |
| 32 | Providing and fixing PVC pipes conforming to ASTM D-1785/1989(Sch-80) |
| 33 | 25mm dia ASTMD Pipe |
| 34 | 20mm dia ASTMD Pipe |
| 35 | Cutting holes through existing brick/stone masonry walls |
| 36 | Providing fitting and fixing of brass/C.P fittings |
| 37 | 15 mm dia C.P Bib cock (Long Body) |
| 38 | Angle cock make Jaguar/ Cera/ Hindware and equivalent |
| 39 | 25mm dia FW Valve |
| 40 | 20mm dia FW Valve |
| 41 | Fitting and Fixing of Rotational moulded polythene cylindrical tank |
| 42 | Fixing wash hand basin with hole for pillar tap |
| 43 | Fixing pedestal for wash hand basin complete |
| 44 | Fixing C.P/Brass waste nominal diameter |
| 45 | Fixing P.V.C waste pipe nominal diameter |
| 46 | Fixing 15 mm dia P.V.C connection pipe |
| 47 | 15mmx15mm Brass Elbow |
| 48 | 20mmx20mm Brass Elbow |
| 49 | 25mmx20mm Brass Elbow |
| 50 | 20mm x 1.5\\" CP Nipple |
| 51 | 20mm Elbow (PVC) |
| 52 | 25mm Elbow (PVC) |
| 53 | 32mm Elbow (PVC) |
| 54 | 25mm Tee (UPVC) |
| 55 | 110mm dia OD PVC Pipe |
| 56 | 110mm dia PVC Bend |
| 57 | 110mm dia PVC Tee |
| 58 | 110mm dia PVC Door Tee |
| 59 | 75mm dia OD PVC Pipe |
| 60 | 75mm dia PVC Bend |
| 61 | 20mm Brass MTA |
| 62 | 25mm Socket (Sc-80) |
| 63 | 20mm Socket (Sc-80) |
| 64 | Solvent Cement (UPVC) 237 ML pack |
| 65 | Teflon tape |
| 66 | Clamp for fixing of PVC Pipe |
| 67 | Recessed wiring to light point / fan point / exhaust fan point with 1.5 sq.mm FR |
| 68 | Group-B |
| 69 | Group-C |
| 70 | \\"S/F of 5 step type Modular electronic Fan Regulator anti bacterial ISI Marked with all connect |
| 71 | \\"Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by |
| 72 | Supply and fixing of ISI marked modular type 2nos 6Amp socket with switch on suitable s |
| 73 | \\"Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switc |
| 74 | Supplying and installation of AC Point having 16-20A DP MCB, C series with encl |
| 75 | \\"\\"2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 |
| 76 | \\"2 no. •'ngIe core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core |
| 77 | \\"2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm co |
| 78 | \\"4 nos single core 6 sq. mm copper wire for phase and neutral and 02 nos of single cor |
| 79 | \\"4 nos single core 10 sq. mm copper wire for phase and neutral and 02 nos of single core 6 |
| 80 | \\"Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm with louve |
| 81 | TPN DB |
| 82 | 63A 4P MCB |
| 83 | 63A RCCB |
| 84 | 25A DP MCB |
| 85 | 6-32A SP MCB |
| 86 | 3.5C x95 sqmm cable |
| 87 | 3Cx2.5 cable |
| 88 | Cable laying |
| 89 | Termination 3.5Cx95 |
| 90 | HDPE pipe |
| 91 | Earth plate |
| 92 | GI strip |
| 93 | AGI wireC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysSep 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender