Tender For Construction Of Positive Suction Pump House With Plc Room And Construction Of Operator Rest Room With Washroom Arrangement At Govt. Polytechnic, Bhubaneswar
Tender Value
37.31 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
10 days left
EMD
38000
Bank guarantee accepted
Document Fee
7080
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Positive Suction Pump House With Plc Room And Construction Of Operator Rest Room With Washroom Arrangement At Govt. Polytechnic, Bhubaneswar
BOQ
| Sl. No. | Item Description |
| 1 | CONSTRUCTION OF POSITIVE SUCTION PUMP HOUSE OF INTERNAL DIMENSION ( 8.00 MTX 5.00 MTR) |
| 2 | Supplying all labours and T&P for earth work in all kind of soil within 50mtr inttial lead and 1.5mtr initial lift including rough dressing and breaking of clods maximum 5cmto 7cm size and laying in layers not exceeding 0.30mtr in depth as per direction of Engineer -in -charge. |
| 3 | Earth work of excavationof founation in laterite rock or any hard rock (other than granite or disintigrated rock) removed by chiselling including dressing and levelling the bed not exceeding 1.5m in depth and depositing the soil within initial lead of 50m and as per specification approved by the Department |
| 4 | Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to work site, payment of royalty , taxes& labour cess etc all complete as per specification and direction of Engineer-in-charge. |
| 5 | Cement concrete (1:3:6) with 4cm. Size crusher broken hard Granite metal including cost of all labour ,materials with all taxes, lead ,T & P etc all complete . |
| 6 | Supplying all labour , T&P and removing surplus earth /debrise by mechanical means within 5 K.M radious etc all complete as per the direction of EIC. |
| 7 | Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentin cement mortar (1:6) brick masonary in super structure |
| 8 | In foundation and plinth |
| 9 | in superstructure |
| 10 | PLC & Chlorine room |
| 11 | R.C.C work in ground floor of M-25 grade with 20mm & down grade crusher broken hard Granite chips including hoisting & laying with cost of all labour, materials with all taxes, lead ,T & P etc all complete . |
| 12 | Sunken pump house raft base ( at 2.30 mtr below GL) |
| 13 | Rigid smooth centring and shuttering for R.C.C. works including false work and dismantling then after casting including cost of materials all complete. |
| 14 | R.C.C. Foundation, Plinth Band, Footings, Bases of Columns, Mass Concrete & Precast Slabs etc. |
| 15 | R.C.C. Walls and Fins |
| 16 | RCC columns & beams |
| 17 | RCC walkway slabs |
| 18 | RCC beams |
| 19 | RCC lintel |
| 20 | RCC chajja |
| 21 | Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification. |
| 22 | 6 mm thick cement plaster (1:4) to R CC surfaces finished smooth including closed deep chiping and slury treatment ( for inside area) |
| 23 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32 mm x 32 mm x 2 mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect.C/C and stainless square pipe bracing of size case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect. |
| 24 | Supplying all materials, labour, T&P and fixing of Fixing KOTA Tile in floors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete polishing etc all complete. as per the direction of the Engineer in charge. |
| 25 | Supplying all materials,labour and T&P for fitting and fixing of single Monorail section made out of ISMB 250X 125mm ( I section joist) including hoisting of the ISMB and placing in position under roof ceiling rigidly supported on the walls and beams at both ends and mid points with fixing of 16mm thick MS plate dully welded and jointed with the top flange of the ISMB and anchored on walls and beams with rigid and adequate bolting as per site condition including fitting and fixing of mechanical pulley 3 MT capacity with chain all complete confirming to IS-800-2007 for the positive suction pump houses etc all complete as per the direction of Engineer in charge. |
| 26 | ISMB ( 250x 125mm ) |
| 27 | MS plate ( 300mmx 300mmx 12mm ) |
| 28 | Hoisting joists and trusses and placing in position |
| 29 | Drilling holes 12mm to 25mm dia in iron flats, angles, tees etc. above 10mm thick & upto 16mm thick with hand drill(labour only) |
| 30 | Supplying all labour ,materials and t& P for fitting and fixing of indef ( P3) 3 Ton with 5 mtr Chain pulley block with double bearing , grade-80 material with rugged german design , zinc plated , casting type- Fully pocketed , spheroidal graphaite cast with 0.50 MT over load capacity with powder coated finished, the pulley block shall be comprised of , frame, gears, pawl, bearings, hooks, , load chain, load chain wheel, hand chain, hand chain wheel, hand chain guide and all other components like guide, stripper, midler wheels, anchorage etc confirming to IS 3832-1986 all complete as per direction of Engineer in charge. |
| 31 | Supplying all labour, materials and toold and plants for enamel painting two coats over a coat of primer on MS doors/grills, ISMB joist, MS plate etc as per the approved shade and colour as per direction of Engineer in charge. |
| 32 | 16 mm. thick cement plaster (1 :6) over brick or stone masonry |
| 33 | 1st floor |
| 34 | 12 mm. thick cement plaster (1 :6) over brick or stone masonry |
| 35 | 1st floor |
| 36 | 6 mm thick cement plaster (1:4) to R CC surfaces finished smooth including closed deep chiping and slury treatment |
| 37 | pump house roof slab top |
| 38 | PLC & Chlorine room |
| 39 | Provision for Plastic emulsion painting two coats to walls with over a coat of primer of approved shade on plastered surface to give an even shade in all heights including cost, conveyance, taxes of all materials, cost of all labour, T&P safety belts, sundries etc. as required for the work complete . |
| 40 | Supplying all materials labour T&P for providing M.S. Grill/ Grill gate /Pipe as per following size as per specification.all complete. |
| 41 | Providing , fitting & fixing up UPVC ( Unplasticized Poly vinyle Chloride ) window (sliding type) with 5 mm clear float glass of LG profile as per approved specification including all cost conveyance labour T & P etc complete as per direction of Engineer in Charge. |
| 42 | Cement concrete (1:4:8) with 4cm. Size crusher broken hard Granite metal including cost of all labour ,materials with all taxes, lead ,T & P etc all complete . |
| 43 | Cement concrete (1:2:4) with 12cm. Size crusher broken hard Granite chips including cost of all labour ,materials with all taxes, lead ,T & P etc all complete . |
| 44 | Recessed / Surface wiring to light point / fan point /Exhaust fan point /call bell point with 1.5 sqmm FR PVC insulated single core multi strand copper conductor of ISI marked with 20 mm dia non-m , MS box with 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire -Finolex/L&T/Anchor/Havells/V-Guard). |
| 45 | Light Points, Group - A |
| 46 | Light Points Group - B |
| 47 | 5A Plug Point |
| 48 | Fan Point (Group - A) |
| 49 | Supplying all materials labour & T & P for fitting & fixing of following electrical installations including testing & commissioning etc. complete as per direction of Engineer in Charge. |
| 50 | Step up modular regulator for Fan |
| 51 | 15watt LED Bulb. |
| 52 | 1200mm Ceiling Fan Havells make Fusion |
| 53 | Electric 200mm Exhaust Fan (Havells Ventil air DB) |
| 54 | Titanio Pro LED Tube Light -18W (Double side connection) |
| 55 | 32A Double Pole MCB. |
| 56 | 5 Amp switch |
| 57 | 5 Amp socket |
| 58 | Ceiling Rose - |
| 59 | Angle Holder |
| 60 | 2.50 Sqmm 3 core copper armoured Cable |
| 61 | Providing weather coat painting two coats over a coat of primer of approved shade of walls including cost conveyance of all materials, etc. all complete as per specification & direction of Engineer-in-charge. |
| 62 | Supplying all materials labour T&P for providing fitting & fixing of MS plate 5mm thick over the door grills as per following size as per specification.all complete. |
| 63 | Supplying all labour, materials and toold and plants for enamel painting two cioatrs over a coat of primer on MS doors/grills as per the approved shade and colour as per direction of Engineer in charge |
| 64 | Supplying, fitting and fixing of two track UPVC openable Door with door frameof approved make with 6 mm thick glass of approved quality complete with frame,shutters and all fittings and fixtures including fixing materials and cost, transportation, taxes etc. all complete in all respect as per the direction of the Engineer-in-charge. |
| 65 | Double Stage Centering and Shuttering for Roof Slabs, Balconies and Projections above 3.60m and upto 7.20m heights |
| 66 | Supplying all labour and tools and plants for Dismantling of RCC walls by means of core cutting of 150mm dia to avoid further damage to adjacent concrete and reinfcorement so that the reinforcement can be rewelded properly by chiselling with electric breaker weighing up to 7.50Kg with capacity of 20 joules impact to concrete at least leaving a weldable length that core should be taken to size they cut slabs to size so that can easily be removed from site by head load or by chain hauled from inside all complete |
| 67 | Supplying all materials labour & T & P for making water proof Micro Concrete of any reputed brand (Preferable Perma Polycrete/jaipax) for R.C.C. works including hoisting and laying etc. complete as per direction of Engineer in charge. |
| 68 | Supplying all labour, materials. T&P for for sealing the Joint using Perma Polyseal (POLYSULPHIDE SEALANT) in 50mm x 25mm size groove including all cost. conveyance. wastages & taxes etc. all complete. |
| 69 | Earth work in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer-in-charge. |
| 70 | Supplying all materials labour T & P and fillings sand in foundation & plinth walls well water and rammed. |
| 71 | Cement concrete (1:3:6) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, lead,T & P etc all complete . |
| 72 | Supplying of all materials, labour T&P for Brick work with cement Mortar (1:6) with fly ash Bricks having crushing strength not less than 75 kg/cm2 in foundation and plinth including all cost, converyance, taxes and royality etc. all complete as per P.W.D. specification & direction of Engineer-in-Charge. |
| 73 | Supplying of all materials, labour T&P for providing Fly ash brick work in C.M (1:6) in super structure using fly ash brick work of size 25x18x8cm having C.S not less than 75 Kg/Sqcm.including all complete as per the direction of Engineer-in-charge. |
| 74 | Supplying and fitting & fixing of un plasticised polyvinyle chloride (UPVC) (FENESTA/NCL VEKA Ltd) Ventilator/Top hung- 60 - series duly manufactured using upvc reinforced profile of 60mm x 55mm x 2.5 mm for outer frames, 75mm x 50mm x 2.25 mm for casement ventilator sash profile & 74mm c 60mm x 2,5 mm mullion profile capable of mounting single glazing system , structurally reinforced with hot deep galvanised up to 50 microns of minimum thick ness of 1.5 mm prefabricated & welded through fusion welding the ventilator sash shall be fitted with 6mm thickclear toffened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistance accessories like clipping locking system made up aluminium -1 No per set of sashes & the system is to be installed at the site using anchor fastener, silicon rubber sealant , easy glazing/ de glazing at site etc including cost & conveyance of all materials accessories labour charges materials and product confirming to ASTM D 638- 14, EN- 477 - 95 & other applicable codes and standards. |
| 75 | Cement concrete (1:11/2:3) with 12mm.size crusher broken hard Granite chips for R.C.C.work including hoisting & laying with cost of all labour, materials with all taxes, lead ,T & P etc all complete as per the direction of Engineer-in-charge. |
| 76 | Rigid smooth centring and shuttering for R.C.C. works including false work and dismantling then after casting including cost of materials all complete. |
| 77 | Plinth Band |
| 78 | Lintel |
| 79 | Roof Slab Chajja |
| 80 | M.S reinforcement of grade Fe500 as per IS:1786 for RCC work including cutting,bending,and typing the grills and placing in position including cost of binding wire 18 to 20 guage & M.S reinforcement. |
| 81 | Supplying all labour materilas and T&P for making 2.5cm. thick grading concrete (1:2:2) on roof slab with 6mm. Size on new work crusher broken Granite chips |
| 82 | Supplying all labour materilas and T&P for providing 16 mm thick cement plaster in C.M. ( 1 : 6 ) over brick masonry work |
| 83 | Supplying all labour materilas and T&P for providing 12 mm thick cement plaster in C.M. ( 1 : 6 ) over brick masonry |
| 84 | Supplying all labour materilas and T&P for providing 6 mm thick cement plaster in C.M. ( 1 : 4 ) to RCC surface finished smooth including close deep chippig and slurry treatment with all complete. |
| 85 | Supplying all materials labour T&P for providing M.S. Grill as per following size as per specification.all complete. |
| 86 | Supplying all materials, labour, T&P and fitting and fixing of FRP/Rajashree make 30mm single panel PVC moulded door with choukaths (with door frame of 40mmx48mm size) of approved quility including fixing materials and cost, transportation, taxes etc. all complete in all respect as per the direction of the Engineer-in-charge. |
| 87 | Supply & Fixing Tiles in floors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles all complete with Gold Category, Digital Prints Matching Floor Tile (Premium Quality) - (Size-300mmX300mm) |
| 88 | Supply & Fixing Tiles to dados skirting & risers on 12mm. thick C.P (1:3) jointed with neat cement slurry with cost of precast tiles.(300mm x 450mm) Gold Category, Digital/Digital High lighter (Premium Quality ) (Make - Khajaria/Somany) |
| 89 | Finishing plastered surfaces of walls with Berger Synthetic putty (interior wall puty) wall puty and making smooth to receive painting. |
| 90 | Provision for Plastic emulsion painting two coats to walls with over a coat of primer of approved shade on plastered surface to give an even shade in all heights including cost, conveyance, taxes of all materials, cost of all labour, T&P safety belts, sundries etc. as required for the work complete . |
| 91 | Providing wall painting 2 coats with weather paint of approved shade on wall surface over a coat of water bound wall cement primer to give an even shade including cost of brushes& putty including cost, conveyance, royalities etc, all complete. |
| 92 | Supplying all materials , labour & T & P for Painting of M.S. pipe, Gate, Door & windows with 2 coats of enamel paint over a coat of Red Oxide primer including cost of all labour, materials with all taxes, lead ,T&P etc all complete. |
| 93 | Recessed / Surface wiring to light point / fan point /Exhaust fan point /call bell point with 1.5 sqmm FR PVC insulated single core multi strand copper conductor of ISI marked with 20 mm dia non-m , MS box with 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire -Finolex/L&T/Anchor/Havells/V-Guard) |
| 94 | Light Points, Group - A |
| 95 | Light Points Group - B |
| 96 | 5A Plug Point |
| 97 | Fan Point (Group - A) |
| 98 | Supplying all materials labour & T & P for fitting & fixing of following electrical installations including testing & commissioning etc. complete as per direction of Engineer in Charge. |
| 99 | Step up modular regulator for Fan |
| 100 | 15watt LED Bulb. |
| 101 | 1200mm Ceiling Fan Havells make Fusion |
| 102 | Electric 200mm Exhaust Fan (Havells Ventil air DB) |
| 103 | Titanio Pro LED Tube Light -18W (Double side connection) |
| 104 | 32A Double Pole MCB. |
| 105 | 5 Amp switch |
| 106 | 5 Amp socket |
| 107 | Ceiling Rose - |
| 108 | Angle Holder |
| 109 | 2.50 Sqmm 3 core copper armoured Cable |
| 110 | Supplying all materials,labour and T&P for cutting grooves in pucca floor and walls for taking P.V.C./G.I pipes and mending good the damages including cost of all materials, labour, T&P etc. all complete as per P.H. specification and direction of Engineer-in-charge. |
| 111 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. |
| 112 | 20 mm dia CPVC pipe (Wall ceiling) |
| 113 | Supplying fitting fixing of following P.H. fixtures including all cost conveyance labour T&P etc all complete as per specification and direction of Engineer-in-charge. |
| 114 | 10 litr pvc low level cistern with fittings |
| 115 | 15mm dia c.p.long body bib cock |
| 116 | 15 mm CP 2 in 1 Bib cock . |
| 117 | 15mm dia c.p.angular stop cock |
| 118 | 20mm dia c.p concealed stop cock |
| 119 | 15mm dia c.p. pillar cock |
| 120 | CP Shower (Over Head) |
| 121 | C.P. towel ring. |
| 122 | CP Health Foucet with 1.0 mtr PVC Tube |
| 123 | CP Towel Rail(600x20)mm |
| 124 | C.P. glass self with glass |
| 125 | CP Soap Holder |
| 126 | CP Grating(125mm) |
| 127 | 22\\"x 16\\"(550x400) W.H.B |
| 128 | Standard Pedestal for WHB |
| 129 | Frammed Mirrior |
| 130 | 32mmx1150mm long PVC corrugated waste pipe |
| 131 | 15mmx600mm PVC connection pipe |
| 132 | E.W.C. with P-trap |
| 133 | 24\\"x 18\\"x 10\\" STEEL sink single bowl(Ordinary ) |
| 134 | C.I. Sink Bracket in pair |
| 135 | 25mm dia PVC ball cock |
| 136 | 25 mm UPVC BALL VALVE Sch-80(Plastic Ball) |
| 137 | 25mm dia UPVC ELBOW 90' |
| 138 | 25mm dia TANK NIPPLE |
| 139 | 25mm dia EQUAL TEE |
| 140 | 25mm dia SOCKET/COUPLER |
| 141 | 20mm CPVC ELBOW 90' |
| 142 | 20 x 20 x 15mm brass tee |
| 143 | BRASS MTA 20mm dia |
| 144 | Supplying all materials ,Labour & T & P for fitting & fixing of 1000 ltr capacity double layer white Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position with prvision of Brick masonry staging with RCC cross beams & slab as per approved drawig and design for the storage tanks etc all complete as per specification and direction of the Engineer in charge including cost of RCC staging. |
| 145 | 1000 Lt -3 Layer White IS-12701-1996 |
| 146 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor / Laying in trenches of uPVC pipes & fittings conforming to IS specifications of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge. |
| 147 | 25mm upvc pipe |
| 148 | Supplying fitting fixing laying following SWR PVC pipes & fittin including jointing with rubber ring to wall with supply of nails, bobbins wall plug and cutting the pipes to length and wastage including supply of all materials T&P along with jointing materials, testing the pipe line as per P.H. specification and direction of Engineer-in-charge. |
| 149 | 110 mm OD PVC SWR S/S Pipe (ISI type-A) |
| 150 | 110 mm dia P.V.C. SWR Vent Cowl |
| 151 | 110mm diaP.V.C. SWR.pipe clip |
| 152 | 110 x 110 x 110mm dia PVC SWR Tee |
| 153 | 110 mm dia P.V.C. SWR plain bend |
| 154 | Supplying all materials,labour and T&P for constructing Inspection chamber with R.C.C. top slab in (1:1.5:3 ) mix with inside plaster 12mm. thick with cement mortar (1:3) finished with neat cement punning, 12mm. thick out side plaster (1:3),flyash brick work with flyash bricks with crushing strength not less than 75kg/sqcm. in cement mortar (1:3) finished smooth complete as per specification. |
| 155 | Construction of Inspection Chamber.(0.75x0.75x0.45)m with RCPC cover |
| 156 | Every additional depth of 0.10m or part- |
| 157 | Supplying all materials labour & T&P for constructing of brick masonry gully trap chambers earth work in excavation in all kinds of soil, 250mm thick K.B. brick work in C.M. (1:5) with K.B. bricks having crushing strength not less than 75kg/cm2, 12mm thick cement plaster in C.M. (1:3) for both inside and outside of brick masonry work with neat cement punning on Top and inside surface area including benching and channelling work with C.C. (1:2:4) with 12mm Hard granite chips of requisite quantity and then plastering with C.M. (1:3) over it and then smooth finish with neat cement punning including cost of RCPC cover slab,SWR Gully trap,SWR grating etc. all complete as per approved P.H.E.D. specification and direction of Engineer-in-charge. (300mm x 300mm x 300mm deep) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender