Tender For special repair To Srdh Hostel In Scbmch, Kataka For The Year 2026-27 (Such As Providing Outside And Inside Plastering, Primer & Weather Seal Coat Painting)
Tender Value
32.33 Lakhs
Estimated cost
Bid Submission
01 Sep 2026
8 days left
EMD
32400
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Cuttack → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special repair To Srdh Hostel In Scbmch, Kataka For The Year 2026-27 (Such As Providing Outside And Inside Plastering, Primer & Weather Seal Coat Painting)
BOQ
| Sl. No. | Item Description |
| 1 | Scrapping out old paint / distemper from wall upto 5mtr height with scrapper, sand papering, washing with soap or soda water including scaffolding charges etc. complete in all respect as per specification & direction of Engineer-in-Charge. |
| 2 | Scrapping out old paint / distemper from wall above 5mtr height with scrapper, sand papering, washing with soap or soda water including scaffolding charges etc. complete in all respect as per specification & direction of Engineer-in-Charge. |
| 3 | Painting two coats with fungal resistance weather seal coat of approved shade over a coat of primer by means of brush to out side surface of walls after cleaning the surface including watering, curing etc complete in all floors including cost, conveyance, taxes of all materials, labours, sundries, T&P required for the work etc. complete in all respect as per specification & direction of Engineer-in-charge. (i)Ground floor |
| 4 | (ii)First floor |
| 5 | (iii)Second floor |
| 6 | (iv)Third floor |
| 7 | (v)Fourth floor |
| 8 | (vi)Fifth floor |
| 9 | (vii)Sixth floor |
| 10 | Providing 16mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to inside rough surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. (i)First floor |
| 11 | (ii)Second floor |
| 12 | (iii)Third floor |
| 13 | (iv)Fourth floor |
| 14 | (v)Fifth floor |
| 15 | (vi)Sixth floor |
| 16 | Painting two coats with approved plastic emulsion paint to inside surface of walls after cleaning the surface including watering, curing with cost, conveyance, taxes of all materials, labour, T&P required for the work etc. complete as per specification & direction of Engineering-in-charge. (i)First floor |
| 17 | (ii)Second floor |
| 18 | (iii)Third floor |
| 19 | (iv)Fourth floor |
| 20 | (v)Fifth floor |
| 21 | (vi)Sixth floor |
| 22 | Finishing the wall surface with cement putty of approved make and finished smooth & even surface to receive painting including cost of scaffolding staging charges with cost, conveyances, taxes of all materials, cost of labour, T&P required for the work etc. complete as per specification & direction of the Engineer-in-charge. First floor to Sixth floor |
| 23 | Removing old damaged lime or cement plaster from walls including racking out joints and removing the debris away from work site within 50m. lead etc. complete as per direction of the Engineer-in-charge. |
| 24 | Priming one coat with any approved water bound Wall primer up to any height & in all floors to give an even shade including cost, conveyance, taxes of all materials with Labour, T&P required for the work complete in all respect as per direction of the Engineer-in-charge. |
| 25 | Providing 12mm thick cement plaster in cement mortar (1:6) in all floors finished smooth to out side smooth surface of brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge. |
| 26 | R.C.C work of M-20 Grade having a minimum compressive strength (in work test) 200kg/sqcm in 15cm cubes at 28 days after mixing and test conducted in accordance with IS 456 and IS516 using 20mm down graded size black hard crusher broken granite stone chips as per the design mix of approved quality and from approved quarry including hoisting, lowering, laying and compaction by using vibrators, watering, curing for 28days, centering, shuttering and finishing the exposed surface smooth, providing grooves or beads where necessary including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete in all respect but excluding cost of MS Rod or tor steel and binding wires & labour charges for bending binding and tying the grills etc. as per specification and direction of the Engineer-in-Charge. RCC Chajja |
| 27 | Cutting, straightening coiled or bent up M.S. Rod or tor steel (TATA/ SAIL/Vizag/ Zindal etc)including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender