Tender For Supply Of Vessals And Maintenance Of Electrical And Flooring Works For Ammaunavagam In Kadayanallur Municipality
Tender Value
6 Lakhs
Estimated cost
Bid Submission
07 Sep 2026
14 days left
EMD
6000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tenkasi → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply Of Vessals And Maintenance Of Electrical And Flooring Works For Ammaunavagam In Kadayanallur Municipality
BOQ
| Sl. No. | Item Description |
| 1 | 20 படி வட்டம் (ம ) மூடி |
| 2 | இட்லி குக்கர் |
| 3 | குத்துபோனி - பெரியது |
| 4 | தண்ணீர் ஜக் |
| 5 | பிளாஸ்டிக் குடம் |
| 6 | பிளாஸ்டிக் டிரம் |
| 7 | தட்டு |
| 8 | டம்ளர் |
| 9 | கரண்டி - பெரியது |
| 10 | கரண்டி - சிறியது |
| 11 | சாம்பார் வாளி - பெரியது |
| 12 | சாம்பார் வாளி - சிறியது |
| 13 | கண்சட்டி |
| 14 | அரிவாள்மனை |
| 15 | அரிவாள் |
| 16 | கிரைண்டர் -10 லி |
| 17 | மிக்சி - பெரியது |
| 18 | குக்கர் -10 லி |
| 19 | குளிர் சாதன பெட்டி |
| 20 | மின்னணு எடை இயந்திரம் |
| 21 | Supply and fixing of Carbon-di-Oxide Gas Type 2 kg. capacity Fire Extinguisher as per New IS15683, complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re doing the dismantled portions to its original condition wherever found neccessary etc., complete as per standard specification and as directed by the Departmental Officers- M-0852 |
| 22 | Supply and fixing in position of weld mesh of size 25x25mm including cost conveyance to site and all labour charges there fore etc complete |
| 23 | Wiring with 2x1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FTswitch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (6 points per coil) -SD 20 |
| 24 | Wiring with 2x1.5 sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with PVC accessories with 150x100x113mm TW switch box for 5A3 pin non inter locking Wall socket with 5A flush type switch with painting of suitable colour with continuous earthwire connection of 1.5 sq.mm copper wire for open PVC plug point |
| 25 | Wiring with 2x4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor cable of 1100V grade in suitable pipe on wall and ceiling with PVC accessories with 150mmx100mmx113mm TW switch box for15A 3pin non inter locking wall socket with15A flush type switch with painting of suitable colour with continuous earthwire connectionof 4 sq.mm copper wire for open PVC power plug point |
| 26 | Supply and fixing of 20W 4 Feet LED Fitting with LED including cost of Materials and Labour Charges etc complete |
| 27 | Supply and fixing of 1200mm (48\\")AC ceiling fan complete with stepped electronic 300W regulator with1meter down rod on the existing clamp |
| 28 | Providing Cup-board Shutter with frame using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using adhesive along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer befoe use on work |
| 29 | Supply and fixing of 300mm (12\\") sweep (lightduty)AC exhaust fan complete with necessary wall opening and making good of the wall |
| 30 | Supplying and fixing in position Cement based hydrualically pressed Anti-Skid tiles (pattern design) 20mm thick in cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and pointed with same colour of cement etc., complete as per standard specification |
| 31 | Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification |
| 32 | Supplying and erecting in position of 250 liters capacity Industrial Model Reverse Osmosis Water-cumPurifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20 Filter with Housing - 1 No., Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings. The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender