Tender For Addition / Alteration And Special Repair To Certain Md Accn Of Offrs,Jcos And Or At Clement Town
Tender Value
4.07 Crore
Estimated cost
Bid Submission
10 Oct 2026
14 days left
EMD
4.82 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition / Alteration And Special Repair To Certain Md Accn Of Offrs,Jcos And Or At Clement Town
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-Sep-2026 | date | Date | 02-Oct-2026 |
| 2 | 10-Sep-2026 | AMDT to date | Date | 25-Sep-2026 |
| 3 | 24-Sep-2026 | Amendment to date as on 24 Sep 2026 | Date | 10-Oct-2026 |
| 4 | 17-Sep-2026 | date | Date | 02-Oct-2026 |
| 5 | 10-Sep-2026 | AMDT to date | Date | 25-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (un-reinforced) in ground floors and pavings n.exc 15cm thick (above or below GL) complete all as specified and directed |
| 2 | M&L 40mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) laid in panels as in flooring including finishing top surfaces even and smooth without using extra cement complete all as specified and directed |
| 3 | M&L 75mm thick PCC (1:3:6) type C-2 (Using 40mm graded stone aggregate) as in plinth protection /hardstanding , laid in panels, finished the top surfaces even and fair without using extra cement complete all as specified and directed |
| 4 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed |
| 5 | M&L RCC (1:2:4) type B-1 (Using 20mm graded stone aggregate) as in beams and roof including balconies, canopies, deck slabs or in Chajja/facia projection and the like complete all as specified and directed |
| 6 | M&L mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 7 | Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick for fair finished surfaces (Horizontal or sloping) complete all as specified and directed |
| 8 | Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed |
| 9 | M&L brick work with sub class \\"B\\" old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed |
| 10 | M&L for half brick work with subclass ‘B’ bricks, straight or curved on plan to any radius built in CM 1:4 complete all as specified and directed |
| 11 | Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size n.exc 1.50 Sqm complete all as specified and directed |
| 12 | Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size exc 1.5 Sqm and n.exc 4 Sqm complete all as specified and directed |
| 13 | S&F in repair PTMT bath mirror cabinet of overall size 500mmX400mm, fixed in position complete all as specified and directed |
| 14 | M& L Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65X125 mm (Double rebated door frame) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made |
| 15 | M& L Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm (Single rebated door frame) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made |
| 16 | S&F factory made single extruded WPC (Wood Polymer Composite) solid both side prelaminated decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed |
| 17 | S&F 35mm thick FACTORY MADE WIRE MESH SOLID WPC Pre-laminated both side DOOR SHUTTER consisting of Density 650 Kg /Cum Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (confirming as per S:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. M.S powder coated butt hinges with steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardware should be fixed with steel screws etc. Complete as per manufacturer's specification & drawings complete all as specified and directed |
| 18 | S&F powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified Note :Cost of rubber beading and required accessaries will be covered in the item and will be not paid extra.. |
| 19 | S&F Pre coated Steel fixed type Window/ ventilator fabricated from roll formed sections made of Galvanized Steel Colour Coated/ Powder Coated (Base Steel as per IS 513 “D” quality, galvanized as per IS 277 with Zinc of 120 grams/ Sq. Mtr.) with total coated thickness of 0.58 mm or Powder Coated with pure Polyester Powder up to 50-60 microns thick. The windows should be paneled with 4mm thick frosted glass Gaskets are to be made with Ethyl Propylene Diamine Manomer (EPDM). Corner brackets for internal and external frame made of Polypropylene. The above Frame should be fixed to brick/ concrete masonry by using Nylon self-expanding caps and driving MS electroplated 80mm long screws into the caps through frames. Windows shall be provided with Grill made of 10mm MS Square bars welded to 20x4mm angle iron . Distance between bars should not be more than 110mm centre to centre horizontal way. Assembling and installation of windows and ventilators shall be all as per details shown/mentioned on drawings and as per manufacturer‟s instructions complete all as specified and as directed |
| 20 | S&F window/ventilator prepainted section of frame 72x55mm fixed to wall or concrete surface with rawl plugs made of galvanised steel and section of shutter 47x20mm, mulion section 72x50mm (Base steel as per IS 513 \\"D\\" quality galvanized as per IS 277 with zinc of 120 gms/Sqm) glazed and wire gauge shutter prepared to receive wiremesh to the shutter (Double door shutter) with total coated thickness of 0.6mm including grills/guard bars made made of 10mm square bars powder coated fixed to window frame with screws at 110mm c/c horizontal way, 4 mm thick sheet glass, 0.36mm stainless steel wire cloth ieht 1.4mm aperture and necessary fittings and all builders hardware such as handles, tower bolts & stays etc complete all as specified and as directed. |
| 21 | S&F 200mm Aluminium anodised,barrel tower bolts of extruded section and fixed complete all as specified and directed |
| 22 | S&F 250mm Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed |
| 23 | S&F 150mm Aluminium handles, cast type, anodised complete all as specified and directed |
| 24 | S&F 150mm aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 25 | S&F 150mm size floor door stopper of aluminium body and tongue with hard drawn steel spring spring, fixed in floor complete all as specified and directed |
| 26 | S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed |
| 27 | Dismantling of boarding of any type/size as in CB/wardrobes or fixed in any position in hardware (if any) etc complete all as specified |
| 28 | S&F 18 mm thick with min density 600 Kg/Cum LEAD FREE PVC Celuka ply of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet and cupboard shutters and shelves complete as per manufacturer’s specifications complete all as specified and directed |
| 29 | S&F 18 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of single side rigid laminate of approved color and other side plain white colour fixed with ss screws ans solvent cement/ adhesive to make kitchen cabinet shutters complete as per manufacturer’s instructions complete all as specified and directed |
| 30 | S&F 6 mm thick with min density 600 Kg/cu.m LEAD FREE PVC ply fixed with ss screws and solvent cement/ adhesive to make wall mount kitchen cabinet back sides complete as per manufacturer’s specifications complete all as specified and directed |
| 31 | S&F 150mm Hasp and staple, aluminium anodised, including bolt to hinge plate and fixed with screws all as specified and as directed |
| 32 | S & F Auto closing hinges 35 mm of 0 crank ( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position all as specified and directed. |
| 33 | S&F Ball bearing runners 400 mm Telescopic (KA 5632) full extension load capacity 45 kgs complete all as specified and directed . |
| 34 | S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position all as specified. |
| 35 | S&F Ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions all as specified. |
| 36 | S&F Stainless Steel 304 grade wire Basket of pull out type like lain/cup &saucer /bottle/ multi purpose/2-3 shelf baskets etc for kitchens of required suze complete fixed in position complete all as specified and directed. |
| 37 | S&F in repair for stainless steel, 25 mm dia and 1.2 mm thick curtain rod with and including fixing SS brackets and decorative type brass knobs both side of each rod, complete all as specified and directedNote Measurement will be taken between end points of Knobs |
| 38 | S&F mild steel framed work as in grills, gratings etc with ends of bars shouldered and riveted or forged into spikes, framed guard bars, barred iron doors etc, conforming to Fe-290, Gde-E-165 all as specified and directed |
| 39 | S&F Welded steel wire fabric weight n exc 4 kg/sqm fixed to wood or steel members complete all as specified and directed |
| 40 | Taking down existing tar felt and plastering from the roof surface washing down and cleaning the surface with water and rubbish off the premises and M&L 15mm thick cement plaster (1:4) for finishing existing surface and over laying water proofing treatment on top surfaces of roof after cleaning of roof surfaces with water and filling cracks with sealing compound and dried top surface of roof. Apply a coat of cold bituminous primer @ 0.30 liter per Sqm and followed by a layer of APP polymer modified five layered water proofing membrane 3mm thick weight not less than 3.60 Kg/Sqm with non woven polyester reinforcement (weight not less than 150 gm/Sqm) of . The APP membrane shall be laid with LPG connected torch method. A layer of hot blown bitumen grade 85/25 @ 1.20 Kg/Sqm and a layer of bituminous aluminum paint as final finish @ 0.20 Kg/Sqm shall be applied on top surfaces of APP membrane, Application including overlap, side lap shall be provided as per manufacturer instructions and as specified and directed The side lap and end laps should have overlap of 75mm to 100mm and should be thermo fused together so that it forms a single sheet through out complete all as specified and directed by Engr-in-Charge |
| 41 | M & L PCC 1:2:4 type B-0 (using 12.5 mm graded stone agg) mixed withliquid water proofing compound (as per manufacture direction and paid separately) over and incl one coat of cement slurry admixed with acrylic bonding compound SBR Latex liquid polymer as to be used for bonding of new concrete / mortar to old surface as per manufacturer direction and finishing the surface even and fair (without using extra cement) as in roof padding to receive roof treatment complete all as specified and directed.”complete all as specified and directed.Note :- The work is required to be carried out at non-accessible roof for double storey . The contractor shall make arrangement of scoffolding,safety & security of workers and arrangement for approach to roof . The rates quoted shall deemed to be included for these items . |
| 42 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 43 | M&L for coloured ceramic tiles of any design and pattern, 7 to 8 mm thick (square / rectangular) area of each tile exe 0.18 sqm but not exe 0.38, in floor etc incl 15mm thick screed bed in CM 1:6, Set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles complete all as specified and directed |
| 44 | M&L for coloured ceramic tiles of any design and pattern, 7 to 8 mm thick (square / rectangular) area of each tile exe 0.18 sqm but not exe 0.38, in vertical / skirting etc incl 10mm thick screed bed in CM 1:4, Set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles complete all as specified and directed |
| 45 | M&L for Non skid ceramic coloured tiles 7-8mm thick (square/rectangular), grade-4, area of each tile exc 0.11 Sqm but not exc 0.18 Sqm, over and including 15mm thick screed bed in Cement mortar (1:6) in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed |
| 46 | M&L for Non skid ceramic coloured tiles 7-8mm thick (square/rectangular) grade-4, area of each tile exc 0.06 Sqm but not exc 0.11 Sqm over and including 15mm thick screed bed in Cement mortar (1:6) in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed |
| 47 | M & L for coloured glazed ceramic tiles of any design and pattern, 350x 250x 7mm/ 450X 300X 7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match incl 10 mm thick rendering in CM 1:4, complete all as specified and directed. |
| 48 | M & L Light coloured vitrified tiles of any design and pattern, 1200 x 600 x 9 to 10 mm thick as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles. Tiles shall be conforming to IS-15622:2017, Group B1b and including 15mm thick screed bed in Cement mortar (1:6) in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed |
| 49 | M & L Light coloured vitrified tiles of any design and pattern, 1200 x 600 x 9 to 10 mm thick as in vertical surfaces / skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles. Tiles shall be conforming to IS-15622:2017,Group B1b and including 10mm thick rendering in Cement mortar (1:4), set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed |
| 50 | M&L Pre-polished Baroda green marble 16-18 mm thick (table rubbed and polished) in step, jambs, pillars , window cills, cooking platforms and the like in CM 1:4 incl pointing in white cement 1:2 using marble dust with admixture of pigment to match with marble including half round moulding and making hole for gas pipe (where required) over and incl 15mm thick screed bed in CM 1:6 complete all as specified and directed |
| 51 | M&L for 25mm thick PCC (1:2:4) type B-0 (using 12.50mm graded stone aggregate) as in sub base of floor complete all as specified and directed |
| 52 | M&L 75mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of floor complete all as specified and directed |
| 53 | Taking down cement plaster of any description on brick work or stone masonry walls including rackingout joints, hacking for key, scrubbing down with water etc complete all as specified and directed |
| 54 | M&L 15mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed |
| 55 | M & L plastering in two layers consisting of 10mm thick in CM 1:6 and top layer of 5mm thick in CM 1:4 mixed with liquid water proofing compound on fair faces of brick work or concrete surfaces, finished the surfaces even and fair without using extra cement complete all as specified and directed. (WPC shall be measured and paid seperately) |
| 56 | M&L for two coats of oil bound distemper over a coat primer to newly plastered surface including preparation of surfaces complete all as specified and directed |
| 57 | M&L for applying 3mm thick wall care putty on wall complete all as specified and directed |
| 58 | M&L Complete removal of existing treatment to wall (internal) surfaces in any height for two coatss of oil bound distemper on walls over a coat of primer to old plastered surface complete all as specified and directed. |
| 59 | Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces complete all as specified and directed. |
| 60 | M&L 5mm thick rendering in ceiling of cement mortar (1:3) on fair faces of brick work or concrete surfaces, finished the surfaces even and fair without using extra cement complete all as specified and directed |
| 61 | M&L for three coats of white wash to newly plastered surfaces of ceiling including preparation of surfaces, complete all as specified and directed |
| 62 | M&L for one coats of white wash to old plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed |
| 63 | M&L for preparation old treated surfaces of walls and applying one coat of white wash complete all as specified and directed |
| 64 | M&L for preparing old painted steel and iron surfaces of any description over 10 cm Width /Girth and applying one coats of synthetic enamel paint of any tint all as directed |
| 65 | M&L for complete removal of old surface for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over old surfaces complete all as specified and directed. |
| 66 | M&L for preparing new steel and iron surfaces of any description over 10 cm Width /Girth and applying two coats of synthetic enamel paint of any tint over one coat of red oxide primer complete all as directed |
| 67 | M&L PCC 1:5:10 type E-2, using 40 mm graded concrete, as in foundation, mass concreting, sunken floor etc complete all as specified and directed |
| 68 | M&L PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate, as in padding, sunken, coping portion rounded chamfered on edge complete all as specified and directed |
| 69 | M&L 10mm thick rendering cement mortar (1:4) mixed with liquid water proofing compound on fair faces of brick work or concrete surfaces, finished the surfaces even and fair without using extra cement complete all as specified and directed (WPC shall be paid seperately) |
| 70 | Supply only liquid water proofing compound complete all as specified and directed |
| 71 | M&L for two coats of elastomeric compound i.e. super latex of Dr. Fixit or equivalent on concrete surfcae after cleaning of sunken portion (vertical or Horizontal) by removing all the loose mortar, laitance dirt, dust etc by chiesal, hammer, wirebrush, jute brush and air blower complete all as specified and directed |
| 72 | Supply and Fixing 40mm dia GI light grade pipe as in spout of sunken slab complete all as specified and directed |
| 73 | Taking up or down 15mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed |
| 74 | S & F for GI tubing 15mm bore, medium grade with all fittings (such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions, including short lengths etc.) fixed to walls, concealed in wall and ceiling or laid in floor complete complete all as specified and directed.Note:- Cutting chases in wall shall be measured and paid seperately. |
| 75 | Cutting chases, pinning in, making good to facing where required and pointing in Cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water pipe etc and making good, cutting not exc 10cm width or girth complete all as specified and directed |
| 76 | Taking up or down 20mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed |
| 77 | S & F for GI tubing 20mm bore, medium grade with all fittings (such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs,unions etc.) including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete . complete all as specified and directed.Note:- Cutting chases in wall shall be measured and paid seperately. |
| 78 | Fixing only 20mm dia bore GI tubing medium grade fixed to wall or ceiling or laid in floors etc complete all as specified and directed |
| 79 | S & F in repair 110 mm bore PVC (SWR) Soil, waste and vent pipes (6 Kg / Sqcm pressure rating) (single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 80 | S & F in repair 110 mm bore PVC (SWR) Soil, waste and vent pipes (6 Kg / Sqcm pressure rating) (single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed. |
| 81 | S & F in repair 75 mm bore PVC (SWR) Soil, waste and vent pipes , single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 82 | S & F in repair 75 mm bore PVC (SWR) Soil, waste and vent pipes , single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed. |
| 83 | S&F in repair 75mm dia PVC (SWR) multi floor trap with grating including jointing with solvent cement including fixing waste pipe etc complete all as specified and directed |
| 84 | S&F in repair PVC (SWR) junction single, (Single T) equal or unequal 110mm bore with access door complete all as specified and directed |
| 85 | S&F in repair PVC (SWR) junction single, (Single T) equal or unequal 75mm bore with access door complete all as specified and directed |
| 86 | S&F in repair PVC (SWR) bend any radius 110mm bore complete all as specified and directed |
| 87 | S&F in repair PVC (SWR) bend any radius 75mm bore complete all as specified and directed |
| 88 | S&F in repair PVC (SWR) bend any radius 110mm bore with access door complete all as specified and directed |
| 89 | S&F in repair PVC (SWR) bend any radius 75mm bore with access door complete all as specified and directed |
| 90 | S&F in repair PVC (SWR) 'P' Traps 110mm bore complete all as specified and directed |
| 91 | S&F in repair PVC vent cowls 110mm complete all as specified and directed |
| 92 | S&F in repair PVC connection 15mm bore dia 450mm long with 2 Nos PTMT nuts with washer complete all as specified |
| 93 | S&F in repair PVC waste pipe 32/40 mm dia complete all as specified and directed |
| 94 | S&F in repair 20 mm dia brass CP tubular towel rail D type 600mm long complete all as specified and directed |
| 95 | S&F in repair 15mm dia brass chromium plated Bib tap fancy type with wall flange complete all as specified |
| 96 | S&F Wash basins, Vitreous China (flat back) 550x400mm , including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed. |
| 97 | S&F in repair 600x450x4mm thick looking mirror bevelled edge of selected quality glass fixed with stainless steel glass fastner complete all as specified |
| 98 | S&F in repair of sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm and bowl size 410mm x 330mm x160mm complete all as specified |
| 99 | S&F in repair vitreous china squatting pan ‘Orissa pattern’ size 580x440mm white with integral foot rest including connection to trap, and flushing pipe, anti-syphonage pipe, etc and including lime concrete bedding complete all as specified and directed. |
| 100 | S&F in repair PVC flushing cistern low level 10 Ltr capacity of approved make including fixing of brackets connection to WC and making good disturbed area complete all as specified and directed. |
| 101 | S & F in repair vitreous china wash down water closet (Pedestal Pattern) white including connection to drain (or outgoing pipe) and to flush pipe and incl seat cover and all fixing accessories complete all as specified and directed. |
| 102 | S&F in repair 15mm dia brass CP wall mixer with provision for over head shower for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 103 | S&F in repair 15mm dia brass CP sink mixer with swinging spout (wall mounted model) with connecting legs and wall flanges screwed down for iron pipe and fixed complete all as specified and directed . |
| 104 | S&F in repair 15mm dia chromium plated central hole wash hand basin mixer without PWS with 450mm BRAIDED HOUSE hose screwed down high pressure screwed for iron pipe completed all as specified and directed . |
| 105 | S&F in repair CP health faucet with 1m flexible tube and wall hook complete all as specified and directed. |
| 106 | S&F in repair CP overhead shower 100mm round shape single flow (ABS body chromium plated with gray face plate) with rubit cleaning system fixed in 15mm bore of pipe complete all as specified and directed . |
| 107 | S&F in repair CP toilet paper holder fixed to wall with CP brass screws complete all as specified and directed. |
| 108 | S&F in repair sheet glass assembly fancy type 600mm long and fixed with brass screw complete all as specified and directed. |
| 109 | S&F in repairs PVC water storage tank cylindrical, vertical with closed top with threaded cover hoisted and fixed in position tank capacity 500 Ltr with and including ball valve high pressure of PTMT with epoxy coated Aluminum rod and high density plastic ball screwed for 20mm bore of iron pipe and making connection for inlet and outlet including dismantle of old water tank and removing from site complete all as specified and directed |
| 110 | S&F in repairs PVC water storage tank white colour cylindrical, vertical with closed top with threaded cover hoisted and fixed in position tank capacity 1000 Ltr with and including ball valve high pressure of PTMT with epoxy coated Aluminum rod and high density plastic ball screwed for 20mm bore of iron pipe and making connection for inlet and outlet including dismantle of old water tank and removing from site complete all as specified and directed |
| 111 | S&F in repair 15mm dia gun metal gate valve with iron wheel haeded screwed both ends to iron pipe and fixed complete all as specified and directed |
| 112 | S&F in repair 20mm dia gun metal gate valve with iron wheel haeded screwed both ends to iron pipe and fixed complete all as specified and directed |
| 113 | S & F Stainless steel kitchen plate rack 1.0 mm thick sheet of over all size 750 x 900 x 250 mm fixed with steel screws and steel rawal plugs complete all as specified and directed. |
| 114 | M & L 16 to 18 mm thick pre polished granite stone slab of approved quality on cooking platform over and incl 20mm thick cement mortar in 1:6, bedded and jointed with cement mortar and pointed in white cement mortar 1:2 complete all as specified and directed. |
| 115 | S & F in repairs angle stop valve cast copper alloy screwed down high presure screwed both end for iron pipe 15 mm dia fancy type cromium plated complete all as specified and directed. |
| 116 | S & F in repair corner self 300mm radius of 5mm thick toughened glass with CP railing with bracket S & Fixed with brass screw complete all as specified and directed .Make Jaquar Cat Part No ACN-1173, Parryware T-6010A-1, Cera- F-5005103 |
| 117 | M&L for Providing precast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas,water troughs, mangers, shelves and similar articles complete all as specified and directed . |
| 118 | M&L dura stone tiles approved make of size 300x300x8mm thick as in floor over and including 15mm thick screed bed in Cement mortar (1:4), set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed. |
| 119 | M&L for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in surface channel or drain or benching in manhole complete all as specified and directed |
| 120 | M&L for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitered/stopped ends etc complete all as specified and directed |
| 121 | S& F stainless steel magic eye 2 inch length and 180 degree viewing angle including necessary fittings on WPC door complete all as specified and directed. |
| 122 | S& F stainless steel heavy duty security door chain lock of size not less than 300 mm length to be provided with necessary fittings with anti theft sliding chain lock with mounting screws on any type of door, complete all as specified and directed. |
| 123 | M & L for providing and fixing SS (grade 304) railing made of hollow tubes, channels, plates etc, including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 124 | M & L butt hinges of mild steel medium weight cold rolled 100mm long and fixed with screws to door frame complete all as specified and directed |
| 125 | M&L for post construction Antitermite treatment Along the wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in apron complete all as specified and directed |
| 126 | M&L for treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed. |
| 127 | S&F powder coated Anodised aluminium window and ventilator shutters, , aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified |
| 128 | S&F sheet glass 4mm thick ordinary quality and glazing with oil putty in square exc 0.5 Sqm each pane all as spd & directed |
| 129 | S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples |
| 130 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge. |
| 131 | Sewage Disposal |
| 132 | Excavation in trenches not exceeding 1.5 mtr in wide and exc 1.5 mtr but n.exc 3.00 mtr in depth for foundation etc and getting out in soft / loose soil complete all as specified and as directed . |
| 133 | M&L for returning filling in any type of soil including spreading levelling watering and well ramming in layers n. exc 25cm thick complete all as specified and directed |
| 134 | M&L for removing excavated material (Soils) to a distance n. exc 50m and depositing where directed at a level n. exc 1.5m above the starting point complete all as specified and directed |
| 135 | M&L Cement concrete 1:4:8 type D2 (using 40mm graded aggregate) as in foundations or mass concrete complete all as specified and as directed by the Engr-in-Charge |
| 136 | M&L brick work with sub class \\"B\\" old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed |
| 137 | S&F 150mm internal dia of pipe salt glazed stoneware drain pipes grade 'A', laid in trenches and jointed in CM 1:1, incl demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) of 150mm bore complete all as specified and directed. |
| 138 | M&L for concrete bed in PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in bed with thickness of bed below the barrel of pipe as 100mm and width of bed as 450mm to sewage pipes of 150mm internal dia including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed |
| 139 | M&L for cutting into existing manholes for connecting new drains 150mm dia making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required complete all as specified and directed |
| 140 | M&L for rendering 15mm thick in CM 1:4 on brick or concrete surfaces finishing the surface even and smooth without using extra cement complete all as specified and directed |
| 141 | M&L Cement concrete type B1 1:2:4 (20 mm graded stone aggregate) as in seismic and other similar bands, plinth courses, string courses, lacing courses, , copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed. |
| 142 | M&L for reinforced precast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary form work, set in CM 1:4 complete all as specified and directed (Note : Reinforcement shall be measured and paid for separately) |
| 143 | S&F Mild steel bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clipscomplete all as specified and directed. |
| 144 | Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed |
| 145 | Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) 150 mm dia set in cement mortar complete all as specified and directed |
| 146 | Road Path |
| 147 | Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed |
| 148 | M&L 75mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of floor complete all as specified and directed |
| 149 | M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed. |
| 150 | M&L for Machine pressed precast concrete interlocking paver block any shape & size confirming to IS 15658-2006 of 60mm thickness M-40 grade with grey cement and pigment complete all as specified and directed by Engineer-in-charge. |
| 151 | M & L rubber moulded coloured glossy finished cement concrete Chequered tiles of size 30 cm x 30 cm x 25mm thick jointed in neat cement slurry and pointed in white or coloured cement and pigment to match the surface of tile as in floor over and including 15mm thick screed bed in Cement mortar (1:6), complete all as specified and directed. |
| 152 | M&L Cement concrete type B1 1:2:4 (20 mm graded stone aggregate) as in seismic and other similar bands, plinth courses, string courses, lacing courses, , copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed. |
| 153 | External electrification |
| 154 | Dismantling and taking down carefully U/S copper / aluminium point wiring (light, fan, socket, power) complete fitting such as switches, ceiling roses, pendants, lamp holder, light fitting etc including CI/Pressed steel terminals, switch box, and making good the disturbed surface of wall/floor etc, to match with the existing surfaces of wall/floor complete all as specified & directed. |
| 155 | Taking down submain/ service / UG cable on wall/ trenches/ roof/ floor etccomplete all as specified and directed. |
| 156 | Dismantling and taking down carefully existing DB’s & DB Enclosurs of any type and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc. complete all as specified |
| 157 | M&L Point wiring with 1.5 Sqmm (Nominal area) FRLSH PVC insulated and unsheathed single core cable 1100 volts grade with stranded copper conductor in and including concealed rigid PVC conduit(ISI marked) medium grade of size not less than 20 mm dia including accessories incl cutting chases , making surface good etc along with contineous earth wire 1.5 Sqmm FRLSH PVC insulated , unsheathed stranded copper conductor cable and connected to common earth dolly including metal flush box with white cover plate & frame for modular switch & socket complete with all accessories for Make of PVC pipe:-Finolex,RPG,ESS ESS Kay complete all as specified & directed for the following:- |
| 158 | (a) One light/fan/bell/exhaust fan point controlled by one, 01-way modular type switch 5/6 Amp. |
| 159 | (b) On the same board with other switches/sockets |
| 160 | (c) One 5 pin 5/6 Amps socket outlet point on independent board controlled by one, 01-way modular type switch single pole 5/6 Amps. |
| 161 | (d) One light point controlled by two, 02-way point wiring with two no of two way switch with cables 1.5 sqmm size in PVC conduit |
| 162 | M&L Point wiring with 2.5 Sqmm (Nominal area) FRLSH PVC insulated and unsheathed single core cable 1100 volts grade with stranded copper conductor in and including concealed rigid PVC conduit(ISI marked) medium grade of size not less than 20 mm dia including accessories incl cutting chases and making surface good etc along with contineous earth wire 2.5Sqmm FRLSH PVC insulated , unsheathed stranded copper conductor cable and connected to common earth dolly, including metal flush box with white cover plate & frame for modular switch & socket complete with all accessories for Make of PVC pipe:-Finolex,RPG,ESS ESS Kay. (a) one three pin 15 Amps Switch Socket outlet on independent board |
| 163 | M&L Point wiring with 1.5 Sqmm (Nominal area) FRLSH PVC insulated and unsheathed single core cable 1100 volts grade with stranded copper conductor drawn in Existing concealed PVC conduit, along with contineous earth wire 1.5 Sqmm FRLSH PVC insulated , unsheathed stranded copper conductor cable and connected to common earth dolly including metal flush box with white cover plate & frame for modular switch & socket complete all as specified & directed for the following :- |
| 164 | (a) One light/fan/bell/exhaust fan point controlled by one, 01-way modular type switch 06 Amp. |
| 165 | (b) On the same board with other switches/sockets |
| 166 | (c) One 5 pin 5/6 Amps socket outlet point on independent board controlled by one, 01-way modular type switch single pole 5/6 Amps. |
| 167 | M&L Point wiring with 2.5 Sqmm (Nominal area) FRLSH PVC insulated and unsheathed single core cable 1100 volts grade with stranded copper conductor drawn in Existing concealed PVC conduit, along with contineous earth wire 2.5Sqmm FRLSH PVC insulated , unsheathed stranded copper conductor cable and connected to common earth dolly, including metal flush box with white cover plate & frame for modular switch & socket complete with all accessories for Make of PVC pipe:-Finolex,RPG,ESS ESS Kay. (a) one three pin 15 Amps Switch Socket outlet on independent board |
| 168 | Supply and fixing modular switch type 1 way 06 Amp, 1 Module, 240 Volts AC , |
| 169 | Supply and fixing modular switch type 1 way 16 Amp, 1 Module, 240 Volts AC. |
| 170 | Supply and fixing modular bell push 1 way 06 Amp, 1 Module type all as specified. |
| 171 | Supply and fixing modular switch type 2 way 06 Amp, 1 Module, 240 Volts AC. |
| 172 | Supply and fixing modular socket 06 Amp 3 pin combined, 2 module all as specified. |
| 173 | Supply and fixing modular socket 06/16 Amp combined, 2 module all as specified. |
| 174 | S&F bell ding dong elelctric 230V AC single pole all as speccified and directed |
| 175 | S&F ceiling rose 3 terminal / PVC/ polycarbonate, isolated body ISI marked all as specified and directed |
| 176 | Supply and fixing batton holder ISI Marked mounted on wall including 09 Watt LED Bulb all as specified and directed. |
| 177 | Taking down old ceiling fan from existing building and deposit to MES Store. |
| 178 | S&F LED tube light batten 20 watts 4 fts polycarbonate housing, translucent diffuser with LED light source , 2200 lumen, natural white ,surge protection range 2KV, voltage protection range 120-280 VAC , 2 years warranty ,system efficacy not less than 110 Lm/watt for the fitting , power factor>0.95 total harmonic distortation<20% , colour rendering index >80, coefficient colour temp 6500 K, fixed on site with all accessories all as specified and directed. Make Shakti cat part No SZSLBMX020 or equivalent in Havells , wipro or bajaj LM79 and LM80 reports to be produced . BIS certification must . |
| 179 | S& F in repair oval shape Bulk head Edge-lit LED fitting comprising with high brightness LED 10 watt, IP-67 protection all as specified and directed. |
| 180 | S& F Glaze Wall Light including 7/9 watt LED ( B22) type all as specified and directed |
| 181 | S& F Mirror Light LED fitting 10 Watt fitting (2 feet) complete all as specified and as directed. |
| 182 | M & L for LED Bldg Security light Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. |
| 183 | Supply, fabricated and and fixing of street light bracket made out of GI pipe 1.0 Mtr long, 32 mm dia medium grade bent to shape as directed including clamps made out of 40 mm x 6 mm flat for fixing bracket suitable for steel tubular poles including nuts and bolts, washers and other connected items of required size including painting with one coat of aluminium paint over a coat of red oxide/primer all as specified and as directed. |
| 184 | S& F double door sheet metal enclosure for DB , 08 way , SPN, with 200 Amps rated bus bar , 240 Volts suitable for housing MCBs and flushed inside the wall and making good for disturbed surface with existing etc complete all as specified & directed. |
| 185 | S & F vertical load line in sheet metal enclosures MCCB TPN DB's with double door for incorporating MCCB as incomer and MCBs SP/SPN as outgooing , IP-43 , TPN 4 way with 200 amps rated busbar, 440 volts, as per IS-8623 including taking out old UNSV DB and making good the disturbed surface of wall and match with the existing surface compelte all as specified and as directed. ( Note- MCCB & MCBs as main incomer/out going shall be paid separately in the relevrent items) |
| 186 | S&F DB Power unit MCB protected socket with sheet steel enclosure 20 Amp,220 V, AC combo incl 16 amp plug top indicator type for Acs & Geyser Points |
| 187 | Supply and fixing MCB SP AC 240 volts of 6 to 32 Amps capacity 10 KA, 'B' series and making connections with suitable size of copper lugs complete all as specified and directed . |
| 188 | Supply and fixing MCB SPN 40 Amp 240 V AC 10 KA repturing capacity all as specified. |
| 189 | Supply and fixing MCCB ,63 Amp,415 V,16 KA , 4 Pole , fixed type repturing all as specified. |
| 190 | Supply and fix electric water heater storage type ABS body with glass lined inner tank and heating element upto 2KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve thermostate, NRV connection piece including taking down old water heater storage type from existing building and deposit to MES Store including all as specified and directed. |
| 191 | S&F Exhaust fan AC single phase 230/240 Volt of size 300 mm sweep, metallic body powder coated painted finish, Power consumption- 50 W, Air deplacement -1290 Cum/Hr, RPM-900 complete with louvers including making whole and grouting of nut bolts etc and making good the disturbed sufaces of wall complete including taking down old exhuast fan any type from existing building and deposit to MES Store all as specified and directed. |
| 192 | Supply & fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm sweep complete with all fittings all as specified. |
| 193 | Supply, installing, testing and commissioning factory made and tested LT Panel Indoor type Wall mounted, of size : 900 X 650 X 250 mm suitable for 415 Volts 3 Phase and neutral, 4 wire, 50Hz AC supply system having bus bar chamber with insulated electrolytic Aluminium bus bars TPN of capacity 200 Amps rating installed on DMC insulators with bus bar chamber. front opening type with proper ferrule & cable gland, internal wiring with PVC insulated multistranded copper conductor FRLS cable of adequate size but not less than 1.5 sqmm complete. All steel metal works including frame shall be with anticorrosive coating with seven tank process and finally epoxy polyester powder coating of Siemens grey RAL- 7035 shade. The scope of work also comprising of the following:- |
| 194 | BUS BAR CHAMBER:- (a) 200 Amps 3 Strips and Neutral Strip 100 Amps, Aluminium conductor, with color coded heat shrinkable sleave and shall be mounted on non hygroscopic, non combustible, track resistant, high strength DMC material, interconnection of all incomings & outgoings.(i) Red, Yellow, Green Phase indicating Lights LED type 220 V AC- 1 Set. (Set of three).INCOMING SUPPLY:- (i) MCCB 125 Amps 25 KA , 4 Pole with Adjustable thermal & Fixed magnetic setting release 415 Volts, 50Hz =01 No., Make of MCCB:-L&T/Siemens / Legrand/ SchneiderOUTGOING SUPPLY:- (i) MCB SPN 40 Amps, 230 volts, 50Hz, rupturing capacity 10 KA = 5 Nos., Make of MCB:- L&T/ Siemens/ Legrand/ Schneider.(ii) Space for Fixing of 1 Phase, 2 Wire, Pre-paid Energy Meters- 04 Nos(iii) DMC Connector 2 way 100 A for outgoing submain supply - 5 Nos.Panel wiring for control circuit with copper flexible 1.5 Sq mm & power wiring minimum 4 Sqmm flexible. |
| 195 | Notes For Item No 183 Contd.....:-1. The panel manufacturer should have following certification:-(i) CPRI certificate Degree of protection IP-54 (should have IEC: 61439-1-2 & IEC: 60529 tests)(ii) CPRI certificate short circuit with stand strength should be 50 KA RMS for 1 sec with initial peak of 105 KA.(iii) CPRI certificate rated current not less than 5000A2. MCCB should be capable for on line setting of the current.3. Drawing of panel board/meter box should be got approved from GE Clement Town before fabrication.4. Panel board should be fully compartmentalized in accordance to form 4 b of IEC 61439-1-2. |
| 196 | M & L for sub main wiring with two run of 4 Sqmm (nominal cross sectional area ) of single core unsheathed PVC insulated cables FRLS-H cable 1100 Volts grade multi stranded copper conductor drawn through & including non metallic rigid PVC conduit of size 19/20 mm or higher dia with & including necessary conduit accessories concealed/surface only on roof & colomn) type including 4 Sqmm stranded copper conductor PVC insulated cable as earth wire connected to common earth dolly complete all as specified & directed. Note : Two runs of pahse and neutral wire and one run earth wire with PVC conduit measured as one length or one RM . |
| 197 | M & L for sub main wiring with two run of 6 Sqmm (nominal cross sectional area ) of single core unsheathed PVC insulated cables FRLS-H cable 1100 Volts grade multi stranded copper conductor drawn through & including non metallic rigid PVC conduit of size 19/20 mm or higher dia with & including necessary conduit accessories concealed/surface only on roof & colomn) type including 6 Sqmm stranded copper conductor PVC insulated cable as earth wire connected to common earth dolly complete all as specified & directed. Note : Two runs of pahse and neutral wire and one run earth wire with PVC conduit measured as one length or one RM . |
| 198 | Supply and fixing ceiling fans complete with blades, down rods and electronic regulator accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00, BEE Five star rated with brushless direct current motor (BLDC) including provision of cable flexible 3 core of suitable size wire from ceiling rose to Ceiling Fan complete all as specified and directed. |
| 199 | Taking down carefully by disconnecting and unscrewing from board/ out lets boxes of electric meters of any locatios and location and refixing the in new panel/existing panel complete all as specified and directed complete all as specified and directed. |
| 200 | Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. ( earth pit not less than 2.25 mtr depth below ground level at any type of strata ) with top edge of the earth plate not less than 1.5mtr below normal ground level connected by GI wire for building mm as earth lead by means of brass nuts and bolt,thimbles check nuts, washers including concrete chamber of PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish, internal surface of concrete chamber shall be given internal dia 300mm x300mm, 15mm thick plaster in CM 1:4 funnel with wire mesh, RCC pit cover of 320x320x80mm size (1:2:4) Type B1 using 20mm graded stone aggregate rainforced with XPM and charcoal, dust and common salt all as shown in electrical plate No 3 of MES SSR Part-1(2009) and specified including and provision of GI wire upto 7.5 mtrs long with 15 mm dia light grade Gi pipe protection and watering pipe of GI 20 mm bore, medium grade, including all excavation and earth work and connecting the earthing strip to panel, including testing on completion complete all as specified and directed by Engr-in-charge. Note:- (i) RCC pit cover shall be precast of RCC(1:2:4) type B1, 80mm thick rainforced with XPM weighting not less than 4kg/sqm in lieu of CI cover.(ii) Cost of additional GI wire more than 7.5 mtrs will be measured and paid seperately under relevant items. |
| 201 | Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. ( earth pit not less than 2.25 mtr depth below ground level at any type of strata ) with top edge of the earth plate not less than 1.5mtr below normal ground level connected by GI strip 25x4 mm as earth lead by means of brass nuts and bolt,thimbles check nuts, washers including concrete chamber of PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish, internal surface of concrete chamber shall be given internal dia 300mm x300mm, 15mm thick plaster in CM 1:4 funnel with wire mesh, RCC pit cover of 320x320x80mm size (1:2:4) Type B1 using 20mm graded stone aggregate rainforced with XPM and charcoal, dust and common salt all as shown in electrical plate No 3 of MES SSR Part-1(2009) and specified including and provision of GI wire upto 7.5 mtrs long with 15 mm dia light grade Gi pipe protection and watering pipe of GI 20 mm bore, medium grade, including all excavation and earth work and connecting the earthing strip to panel, including testing on completion complete all as specified and directed by Engr-in-charge. Note:- (i) RCC pit cover shall be precast of RCC(1:2:4) type B1, 80mm thick rainforced with XPM weighting not less than 4kg/sqm in lieu of CI cover.(ii) Cost of additional GI strip more than 7.5 mtrs will be measured and paid seperately under relevant items. |
| 202 | Supply ,Installation and testing of Chimny of size 90 cm with motion sensor , energy efficient ,baffle filter, oil collector cup auto clean,led lemp 8w and touch control max section 1350 cum/hr,filter less technology,motor power 145 W,metallic blower including making suitable hole for exhaust pipe complete all as specified Please Enable Macros to View BoQ information |
| 203 | Supply ,Installation and testing of Chimny of size 90 cm with motion sensor , energy efficient ,baffle filter, oil collector cup auto clean,led lemp 8w and touch control max section 1350 cum/hr,filter less technology,motor power 145 W,metallic blower including making suitable hole for exhaust pipe complete all as specified Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 24, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 02, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 6 days
Sep 25, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Oct 10, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 14 days
Oct 02, 2026
18:00 IST
Corrigendum-4 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 6 days
Sep 25, 2026
18:00 IST
Corrigendum-5 Issued
Clarifications on tender conditions and amendments issued.
CompletedOct 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysOct 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender