Tender For Repair/Replacement Of Plaster, Chajja , Plinth Protection, Balcony Roof, Rain Water Pipes, Repair To Grit Finish Of Map Qtrs And Other Misc B&R Works At Ge (Af) Jammu Under Ge Af Jammu
Tender Value
30 Lakhs
Estimated cost
Bid Submission
10 Sep 2026
12 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement Of Plaster, Chajja , Plinth Protection, Balcony Roof, Rain Water Pipes, Repair To Grit Finish Of Map Qtrs And Other Misc B&R Works At Ge (Af) Jammu Under Ge Af Jammu
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 27-Aug-2026 | Boq Corrigendum | BOQ | 10-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster,existing wall tile/mosaic in any thickness including racking out joint hacking for key scrubing down with water etc and removal of old debris from stn premises complete all as specified and directed by Engineer-in-Charge. |
| 2 | M&L for 15 mm thick rendering in CM 1:6 on fair face of wall or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 3 | M&L Rendering 15mm thick in cement mortar 1:4 on finished fair&even faces of brick/concrete surfaces on walls mixed with liquid WPC as per manufacture instructions (WPC shall be measured and paid in respective item of WPC) without using extra cement complete all as specified and directed by Engineer-in-Charge.Note:-1.The plaster shall be executed as per ground requirement at any where and upto the any height and contractor shall have to provide formwork as per ground or upto any height including necesaary safety precaution should be carried out for site execution, No extra payment will be paid by department. |
| 4 | M&L for 5 mm rendering in CM 1:3 on ceiling of concrete surfaces finished.complete all as specified and directed by Engineer-in-Charge. |
| 5 | Supply only liquid water proofing compound ISI marked complete all as spd and directed by engr-in-charge.Make : Pidilite, Fosroc,Asian |
| 6 | Dismentling of RCC roofs ,shelves, facia beams ,chajjs and similar suspended work and removal of demolished debris from site/ stn premisses etc complete all as specified and directed by Engineer-in-Charge. |
| 7 | M&L for RCC 1:2:4 type B-1 (12.50 mm graded crushed stone agg) as in shelves, facia beams ,chajjas and similar suspended work including necessary form work,scaffoholding upto 4th storey ht. of bldg also use anti rust agent chemical on existing reinforcement etc complete all as specified and directed by Engineer-in-Charge.Note:- No extra payment will be paid to contractor by the department. |
| 8 | M&L for TMT bars 8 mm dia cut length bent to shape required including cranking bending spirally for hooping for column , hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engineer-in-Charge. |
| 9 | M&L for repairing of chajjas, concrete floor , balconies, RCC roof slab, fascias by providing and applying rust proof primer on exposed reinforcement, 2 coat of 301 pidicrete URP ( Make Pidilite, fosroc, asian) with Fibre cloth in cement mortar then rendering in CM 1:4 to the thickness as reqd in upto three layers to achieve the reqd thickness as per manufactural instruction and directed by Engr-in-charge Including cleaning the concrete surface with wire brush or scruber to remove dirt and loose particals and repair concrete portion and priming of concrete surface by using above material complete all as specified and directed by Engineer-in-Charge. |
| 10 | Demolition of PCC of any description & in any position not otherwise specifically provided for (unreinforced) and including removal of old debris from site / stn premises complete all as specified and directed by Engineer-in-Charge. |
| 11 | M&L for cement concrete 1:2:4(Type B-2), 75 mm thick using 40mm graded stone aggregates as in plinth protection finished fair and even,laid to an outward slope of not less than 1:12,plinth protection shall be cast in panels not exceeding 2.00 sqm area with 6mm wide joint between the plinth protection panels,10mm joint between wall and plinth protection and filled with bitumastic filler.complete all as spd and directed by Engr-in-charge |
| 12 | M&L for PCC 1:4:8 type D-2(Using 40 mm graded crushed stone aggregate) as in foundations,filling and mass concrete.complete all as spd and directed by Engr-in-charge. |
| 13 | M&L for Cement concrete pre-polished chequered coloured tiles of 30cm x 30cm x22mm thick, machine pressed; set, jointed and pointed in net cement slurry in floors, and cut and polished with grey cement and no pigment, laid over 20 mm thick bedding layer of cement mortar 1:4.confining to IS 13801:2013 complete all as specified and directed by Eng-in charge Note:-1.Colour ,Pattern and design of Chequered tile should be approved by GE.no extra cost will be bourne department. |
| 14 | M&L for PCC 1:2:4 type B-1, (using 20 mm graded stone aggregate) as in bed blocks, coping, cills, steps, kneelers, bed plates, apex stones kerbs and similar work including necessary form work.complete all as spd and directed by Engr-in-charge. |
| 15 | Supply and fixed in repairs for hollow PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing with fillets ,fittings and fixture with all accessories etc as per approved design as.complete all as spd and directed by engr-in-charge |
| 16 | Supply and fixed in repairs of Hollow PVC Ceiling Lining consisting of 5 to 6 mm thick colour/ printed PVC sheet including fillets,GI frame work,fittings and fixture with all accessories as per approved design,drawing.complete all as spd and directed by Engr-in-charge. |
| 17 | Supply and fixed in repairs Exposed metal frame ceiling with calcium silicate board (8mm thickness)of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately and Gl frame work (size of grid 605x605mm) for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm longcomplete all as specified and directed by Engineer-in-Charge. |
| 18 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of asbestos cement sheets, corrugated or semi corrugated etc in roof covering complete and set a sidecomplete all as specified and directed by Engineer-in-Charge. |
| 19 | S&F poly-carbonate sheet of 10mm thick in any colour and any pattern,fix with aluminium jointing strip,including joints filling with silicon,self tapping screws etc including dismantling of asbestos cement sheets, corrugated or semi corrugated etc in roof covering complete and set a side complete all as spd and directed by Engr-in-charge. |
| 20 | S&F in PVC (SWR) pipes of size 75mm dia with single socket joints fixed to wall with stack clamp and rubber ring joints. Including taking up CI /PVC pipes/SWR pipes (incl all fittings),bend , floor traps with spigot and socket ends and lead joints incl burning out joints and removing lead of pipe complete all as specified and directed by Engineer-in-Charge |
| 21 | S&F in PVC (SWR) pipes of size 110mm dia with single socket joints fixed to wall with stack clamp and rubber ring joints and taking up CI /PVC pipes/SWR pipes (incl all fittings),bend , floor traps with spigot and socket ends and lead joints incl burning out joints and removing lead of pipe complete all as specified and directed by Engineer-in-Charge |
| 22 | Description all as per item no 20 above Re fixing only all as spd and directed by Engg-in-Charge |
| 23 | Description all as per item no 21 above Re fixing only all as spd and directed by Engg-in-Charge |
| 24 | S&F PVC (SWR) bends of any radius with access door bore of pipe 110 mm.complete all as specified and directed by Engineer-in-Charge. |
| 25 | S&F PVC (SWR) bends of any radius with access door bore of pipe 75 mm.complete all as specified and directed by Engineer-in-Charge. |
| 26 | S&F PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 110 mm.complete all as specified and directed by Engineer-in-Charge. |
| 27 | S&F PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 75 mm.complete all as specified and directed by Engineer-in-Charge. |
| 28 | Dismentling of wrought iron,mild steel work such as agle iron,flate and similar type work or any description not otherwise provided complete all as specified and directed by Engineer-in-Charge. |
| 29 | M&L Mild Steel sections confirming to FE-410-W as in Framed work as in doors, gates of angles or other section with gusset plates, rails etc including necessary cutting, drilling, welding etc complete all as per directed by Engr- in charge |
| 30 | M&L for preparation of newly plastered surfaces of walls,Applying two coats of distemper with oil emulsion over a coat of primer over a thin layer of wall care putty including necessary formwork scaffolding required upto the 4th story complete all as specified and directed by Engineer-in-Charge. |
| 31 | M&L for Preparation of new plastered surfaces and applying two coats of exterial emulsion paint on walls including Birla care wall care putty,necessary formwork scaffolding required upto the 4th story complete all as specified and directed by Engineer-in-Charge. |
| 32 | M&L Prepration of new surfaces of ceiling and apply three coat of white wash on surface of ceiling.complete all as specified and directed by Engineer-in-Charge. |
| 33 | M&L for Preparation of new or untreated steel surface of any description exc. 10 cm. in width or girth and applying two coats of synthetic enamel paints, over a coat of red oxide zinc chrome primer, complete all as specified and directed by Engr-in-charge. |
| 34 | M&L for washed grit of external surface with following stages starting with roughening surface by furrowing with scratching tool followed by chicken wiremesh of size 22 gauge after then rendering 15 mm thick in CM 1:4 as underlayer finished rough to recieve topping layer , then application a coat of grey cement slurry @ 2 kg of cement per sqm including filling of groove of size 20*15 mm or as spd ,then application of a mixture of grey cement, marble powder, coloured marble chips (size 12 mm and down size) mixed properly in ratio of (1:0.5:2) in panels to meet existing panels upto the 8th storey including necessary steel props, shuttering fromwork complete all as spd and directed by engr-in-charge. |
| 35 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as per IS:15658-2021 as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; all as specified and directed by Eng-in charge.Note:- Before execution of above mentioned item it is compulsary to make good the existing surface of PCC so that paver block could be fixed properly and no extra cost will be bourne by department. |
| 36 | SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 27, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 10, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 12 daysSep 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender