Tender For special Repair To Joinery Works, Wall Panelling, Officers & Pbor Toilets And Other Connected B/R Wks Of Bldg No P/8/441 (Office Complex) At Pms Under Ge Panagarh
Tender Value
43.79 Lakhs
Estimated cost
Bid Submission
09 Sep 2026
11 days left
EMD
87600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Purba Bardhaman → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Joinery Works, Wall Panelling, Officers & Pbor Toilets And Other Connected B/R Wks Of Bldg No P/8/441 (Office Complex) At Pms Under Ge Panagarh
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable material exc 100 mtr complete all as specified as directed. |
| 2 | M&L for old size brick work with fly ash bricks straight or curved on plan exc 6 m mean radius build in CM 1:6 complete all as specified as directed. |
| 3 | Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) including all type of tiling, marble chips , terrazo finish where ever existing etc complete all as specified as directed. |
| 4 | Dismantling of floor, walls tiles incl bedding but backing and rubbish off permises complete all as specified as directed. |
| 5 | M&L for 75 mm thick cement concrete M10 (Nominal Mix) with 40mm graded crushed aggregate finished even and fair laid to a slope of 1 in 12, laid in alternate bays, each bay not exceeding 3 m length with joint filled with bituminous mastic filling comprising a mixture of 1 part of heated Industrial bitumen 85/25 grade and two parts of heated sand as in plinth protection complete all as specified. |
| 6 | M&L 25 mm thick cement concrete (1:2:4), type B-0, using 12.50 mm graded aggregate as in floors including finishing the surface rough for laying finishes complete all as specified and directed. |
| 7 | M&L PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation filling, sub base and mass concrete complete all as specified and directed by Engineer-in-Charge. |
| 8 | M&L for hardcore using broken stone/boulders hard core gauge n.exc 63mm deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed by Engr-in-Charge. |
| 9 | M & L for PCC (1:3:6) Type C2 using 40 mm graded aggregate used as in sub base floor/pavings and finishing complete all as specified and as directed. |
| 10 | M&L Sand filling under floors or in foundations including watering and consolidaion, complete all as specified as directed. |
| 11 | M&L for pre-polished factory made 60mm thickness precast concrete interlocking paver block (coloured) any size and shape with grey cement and pigment confirming to IS 15658-2006 of M-35 Grade complete all as specified and directed . |
| 12 | M&L for Glazed ceramic designer coloured tiles 8 to 10 mm thick (Square/rectangular) area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm in wall/dado etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match rendering over 10 mm thick in CM 1:3 on stone masonry surfaces or surfaces other than fair face of brick work/ concrete surfaces complete all as specified and directed. |
| 13 | M&L Virified Ceramic tiles light shade double charge 8 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including over screed bed or bedding layer of mortar 15 mm thick laying floor finished in CM 1:6 complete all as specified and directed. |
| 14 | M&L Virified Ceramic tiles drak shade double charge 8 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, on vertical surface such as skirtings etc. set and jointed in cement slurry over 10 mm thick rendering in CM 1:4 complete all as specified and directed.complete all as spd and as directed. |
| 15 | M&L Non Skid coloured ceramic tiles 7 to8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cemeent to match and including over screed bed or bedding layer of mortar 15 mm thick laying floor finished in CM 1:6 complete all as specified and directed. |
| 16 | M&L Coloured glazed ceramic tiles 350x250mmx7mm/450x350x7mm thick and jointed and in neat cement slurry and pointed in white or coloured cement on vertical surfaces in dado/Skirting over 15mm thick plastering in CM 1:4 on stone masonry surface. |
| 17 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost ot Govt), all as specified and directed by Engineer-in-Charge |
| 18 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 sqm but not exceeding 4.00 sqm each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost ot Govt), all as specified and directed by Engineer-in-Charge |
| 19 | M&L for forming jambs in Cement mortar 1:4 to openings (to foregoing item) including cutting, toothing and properly bonding into old work. also facing, jointing and pointing to match existing work, complete all as specified and as directed by Engr-in-Charge. |
| 20 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass.complete all as specified as directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 21 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately). complete all as specified as directed.Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 22 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. . (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 23 | M&L for framed work such as grills etc with ends of bars shouldered nd or riveed or forged into spike, framed guard bars and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed. |
| 24 | M&L for 16mm thick green marble (table rubbed and polished) in steps, jambs, pillars, window cills,bathroom corners cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble shade complete all as spd and directed. |
| 25 | S&F Solid PVC door frame of size 50mm x 95mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. tube, in opening as per specification & drawing complete all as specified and as directed. |
| 26 | S&F Factory made solid moulded PVC door shutter 28 to 30mm thick (style) with 2,4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm thick plain colour PVC sheet on back face with particle face supply & fixing on frame, as per specification & drawing complete all as specified and as directed. |
| 27 | S&F stainless steel Butt hinges 100mm size, medium weight, complete all as specified and as directed. |
| 28 | S&F 150mm long aluminum anodised barrel tower bolts of extruded section complete all as specified as directed. |
| 29 | S&F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300mm long. complete all as specified as directed. |
| 30 | S & F rotational moulded polyethylene ISI marked (vertical cylindrical with close top) as per IS 12701: 1996 of 500 litres capacity hoisted and fixed in position with and including Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 20/25mm bore dia iron pipe, provision of 20 mm /25 mm dia medium grade GI pipe for connecting inlet, outlet, over flow and washout pipes including dismantling the existing one and removing to store complete all as specified and as directed. |
| 31 | Taking up or down steel water tubings and fittings etc complete and making good disturbed surfaces of walls/ceilings etc for 15 mm bore pipe complete including stacking aside for reuse and removal of unserviceable items from site complete. complete all as specified as directed. |
| 32 | Taking up or down steel water tubings and fittings etc complete and making good disturbed surfaces of walls/ceilings etc for 20 mm bore pipe complete including stacking aside for reuse and removal of unserviceable items from site complete. complete all as specified as directed. |
| 33 | S&F 20 mm outer dia medium grade CPVC, SDR 11 & plain CPVC SDR 11 with all fittings (brass inside the fittings) and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 34 | S&F 25 mm outer dia medium grade CPVC, SDR 11 & plain CPVC SDR 11 with all fittings (brass inside the fittings) and fixed complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 35 | M & L for Cutting chasing, pinning for concealed conduit wiring not exceeding 10 cm girth in brick wall including making good to facing where required and pointing in cement mortar 1:3 complete all as specified and directed. |
| 36 | S&F 15 mm bore concealed type stop valves, cast copper alloy, chromium plated with long shank and cup (concealed type), high pressure with capstan head handle, screwed both ends for iron pipe or for unions of 15 mm dia. complete all as specified as directed. |
| 37 | S&F angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe. complete all as specified as directed. |
| 38 | S&F two way angle cock 15 mm bore fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe. complete all as specified as directed. |
| 39 | S&F Bib taps, cast copper alloy, chromium plated , screwed down, high pressure, screwed for iron pipe or for brass ferrule of 15mm dia. complete all as specified as directed. |
| 40 | S&F in repairs PVC connection 15mm dia size and 450 mm long with 2 Nos brass check nuts its washers complete all as specified and as directed. |
| 41 | S & F in repairs vitreous china squatting pan, 'Orissa\\" pattern, size 580 mm X 440 mm white with ‘P’ or ‘S” trap, front or back inlet and integral foot rests, any pattern and including fixing , connector to flush pipe, lime concrete bedding and making connections to flush pipe, connector to branch pipe and anti syphonage pipes etc. including sealing the joints and making leak proof using sealant complete all as specified and as directed by Engineer-in-Charge. |
| 42 | S & F in repairs vitreous china wash down water closet (pedestal pattern), white including thermoplastic seats and covers of grade 2 type, flat with hinging device of bronze or brass with nickel chromium plating, fixing bolt, connector to flush pipe and making connections to flush pipe, connector to branch soil pipe and anti syphonage pipes etc. including sealing the joints and making leak proof using sealant complete all as specified and as directed by Engineer-in-Charge. |
| 43 | S&F 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe fixed to wall complete, incl taking down old cistern of any description. complete all as specified as directed. |
| 44 | S&F in repair brass chromium plated health faucet for EWC with 15 mm dia PVC pipe 1.00 m long including nut/washer complete all as specified and directed. |
| 45 | S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe complete all as specified as directed. |
| 46 | S&F Bras CP towel rail 20mm dia `D' type 60 cm long between flanges complete all as specified as directed. |
| 47 | S&F in replacement of stainless steel soap dish, of standard size and shape complete all as specified as directed. |
| 48 | S&F in repair 5 mm thick looking mirror selected quality glass exc 0.50 sqm each and fixed to wall with brass screws, cups and washers including polished, rounded off edges of glassand drilling hole in glass complete as specified and directed. |
| 49 | S & F in repair shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed. |
| 50 | S&F in repairs grating 100mm dia of PTMT (minimum weight 40 gms) complete all as specified as directed. |
| 51 | S&F Stainless Steel Kitchen Sink with drainage board made of stainless steel 1 mm thk. kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or incl fixing catilever brackets and connection union to pipe overall size 915mm x 460mm Bowl size 410mm x 330mmx 160mm etc. complete all as specified and as directed. |
| 52 | S&F vitreous china counter table top oval shape wash basin , white, flat back , size 485x370x150mm including 32mm waste coupling and all necesssary fittings complete all as spd and directed. |
| 53 | Supply and fixing in repairs brass chromium plated central hole basin mixer without popup waste system with 450 mm long braided hoses complete all as specified as directed. |
| 54 | S & F for PVC waste pipe 32mm dia of standard length suitable for WHB as required at site complete all as specified and directed. |
| 55 | S&F CP Urinal Spreader of any size and any pattern for fixing with 15 mm dia pipe complete all as specified and directed. |
| 56 | Supply and fixing in repair 10mm thick curved shape glass partition of selected quality frosted / pin headed glass as in partition or urinal partition of required size including stainless steel holding brackets and stainless steel screws to secure complete all as directed by Engineer-in-charge |
| 57 | Supply & Fixing in repairs vitreous china one piece wall mounted toilet seat with UF seat cover, hinges, fixing accessories ste, cistren fittings pattern white of size 380x650x730mm including trap fixed in position complete all as specified and directed. |
| 58 | S&F in repair harrison curtain rails, mild steel, chromium plated with conical end balls suitable for fixing as end of curtain/dropery rods complete all as spd and directed. |
| 59 | M&L 4 mm thick any colour ACP board ( Aluminium composite panel ), exterior grade (approved colour) fixed with aluminium frame /other similar frame work all as specified and as directed. |
| 60 | M & L for Providing, fabricating, and fixing maintenance-free and weatherproof 3D individual letters of the English alphabet, each with a height of 30 inches. The letters shall be fabricated using high-quality, UV-resistant cast acrylic sheets (min. 3mm–5mm thickness for fascia) with a 3-inch return (embossment) to create a 3D effect. The internal illumination shall be provided by energy-efficient, IP67/IP68 rated waterproof LED modules ensuring uniform front-lit glow without hotspots. The entire assembly shall be mounted on a sturdy base of 3mm thick Exterior Grade Aluminum Composite Panel (ACP) with a minimum 0.25mm coil thickness, fixed onto a concealed MS/GI square box pipe frame.The letters are to be securely screwed and fixed at any specified height or on the main gate. The work includes all necessary high-quality weatherproof wiring, IP67 rated power supply (SMPS), specialized fasteners, and finishing. The complete installation must be carried out to the entire satisfaction of the Engineer-in-Charge complete all as specified as directed. |
| 61 | Dismantling wooden boarding, any description, fixed in any position with nails. complete all as specified as directed. |
| 62 | S&F 18/19 mm thick, lead free PVC board Superior quality of density not less than 0.55 g/cm3 as in moduler shutters/cabimet drawer cupboard cabinet shutter including all frame work as specified and directed by Engr-in-Charge |
| 63 | Demolition of cement concrete (reinforcement) of any description and in any position not otherwise specifically provided for precast cement concrete louvres and jallies and column complete all as specified as directed. |
| 64 | M&L Providing precast cement concrete louvres and jallies type B-0, 1:2:4 (12.5mm grades aggregate) 35mm thick (measured solid), including all mould- ings set in CM 1:4 but excluding frame. complete all as specified as directed. |
| 65 | S&F Mild Steel TMT bars 10mm and over, cut to lenghth, bent to shape requird, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clip all as directed by Engr-in-Charge. |
| 66 | M&L RCC (1:1.5:3) type B1 (nominal mix) using 20 mm graded stone aggregate as in slab supported on wall, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified as directed. |
| 67 | Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc surface of concrete flat. complete all as specified as directed. |
| 68 | Dismantling of Plian or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattren sheets in roof coverings, ridges hips valleys complete all as specified and directed. |
| 69 | M & L for pre-painted hot-dip aluminium-zinc alloy metallic coated of any profile steel sheet corresponding to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified up to anyheight including all necessary scaffolding and safety measures complete all as specified and directed |
| 70 | M & L for pre-painted hot-dip aluminium-zinc alloy metallic coated plain steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in ridge/ valley/ gutter fixed with self tapping screws as specified any height Mtr height including all necessary scaffolding and safety measures complete all as specified and directed |
| 71 | Dismantling wrought iron or mild steel work of any description incl in roof trusses complete all as specified and directed. |
| 72 | S & F for Roof trusses Fe - 410-W (Gde E-250) Quality B (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, bolting etc. complete all as specified as directed. |
| 73 | M&L for 16mm thick granite (z black) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 20mm thick rendering cement mortar 1:3 on concrete surfaces including all fixtures and fittings complete all as specified and directed by Engr-in-Charge. |
| 74 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as spd and directed. |
| 75 | S&F for powder coated aluminium snap grid (Size= 605mmx 605mm) frame work for false ceiling complete all as spd and directed . |
| 76 | S&F hangers 4 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. complete all as spd and directed. |
| 77 | S&F for 4mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws as in ceiling complete all as spd and directed. |
| 78 | S&F for 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as spd and directed. |
| 79 | S&F for solid PVC Wall Lining consisting of 5mm thick single side prelam colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as spd and directed. |
| 80 | Taking down cement plaster from brick/concrete surfaces including raking out joints, hacking for key and scrubbing down with water etc complete all as specified as directed. |
| 81 | M&L for rendering 10 mm thick in cement mortar 1: 4 on concrete surfaces as in ceilings finished even and smooth without using extra cement, complete all as specified as directed. |
| 82 | M&L Rendring 15mm thick in cement mortar 1:6 on fair faces of brick/concrete surfaces finished fair and even complete all as specified as directed. |
| 83 | Material & Labour for preparation of new surfaces of plastered walls and applying Two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. over and including a coat of primer and 1.0 mm thick white wall care putty (premium quality) over plastered surfaces of walls to prepare the surface even and smooth complete all as specified as directed. |
| 84 | M&L for preparation of new steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer. complete all as specified as directed. |
| 85 | M&L for preparing old decorated plastered or unplasterd surfaces of walls by brooming down or steel wire brushing and sand paper, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and removing extra wall papdi ,peel off wall papdi by sand paper, rectifying minor cracks and undulations using Acrylic Wall Putty and primer to achieve a smooth, even surface. and applying one coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, on walls complete all as specified and as directed. |
| 86 | M&L for preparing old decorated plastered or unplasterd surfaces of ceiling by brooming down or steel wire brushing and sand paper, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and removing extra wall papdi ,peel off wall papdi by sand paper, rectifying minor cracks and undulations using Acrylic Wall Putty and primer to achieve a smooth, even surface. and applying two coats of white wash on ceiling complete all as specified and as directed. |
| 87 | Complete removal of existing treatment and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over plastered surfaces of walls to prepare the surface even and smooth complete all as specified as directed. |
| 88 | Taking down CI/PVC/AC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100/75 mm dia pipe. complete all as specified as directed. |
| 89 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with brackets etc of 110 mm dia complete all as specified as directed. |
| 90 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with brackets etc of 75 mm dia complete all as specified as directed. |
| 91 | S&F PVC (SWR) bends/ shoes any radius of 110 mm dia complete all as specified as directed. |
| 92 | S&F PVC (SWR) bends any radius of 75 mm dia complete all as specified as directed. |
| 93 | S&F PVC (SWR) bends any radius provided with access door of 110 mm dia complete all as specified as directed. |
| 94 | S&F PVC (SWR) bends any radius provided with access door of 75 mm dia complete all as specified as directed. |
| 95 | S&F in repair 110 mm bore PVC (SWR), junction single, (single T), equal or unequal with access door complete all as specified and directed. |
| 96 | S&F in repair 75 mm bore PVC (SWR), junction single, (single T), equal or unequal with access door complete all as specified and directed. |
| 97 | S&F PVC (SWR) vent cowl of 110 mm dia complete all as specified as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender