Tender For special Repair For Replacement Of Water Supply Gi Pipe Line Alongwith Connected Items At Csq Area, Provn Of 01 X 2 Ton Air Conditioner (Split) & 03 X 1.5 Ton Air Conditioner (Split) At Unit Offrs Mess Bldg T-46 , Provn Of Air Conditioners
Tender Overview
Project Description
Tender for special Repair For Replacement Of Water Supply Gi Pipe Line Alongwith Connected Items At Csq Area, Provn Of 01 X 2 Ton Air Conditioner (Split) & 03 X 1.5 Ton Air Conditioner (Split) At Unit Offrs Mess Bldg T-46 , Provn Of Air Conditioners For Bldg No T-34, Stn Mess & Transit Offr Accn And Provn Of 02 X Deep Freezer For Medical Store, Hosp Lab & Blood Storage Room At Mh Babina Under Ge Babina
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr depth and getting out for laying of pipe lines in any type of soil all as directed by Engineer in Charge. |
| 2 | Returning, filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each in soft/loose soil all as directed by Engineer in Charge. |
| 3 | Removal of surplus soil to a distance not exceeding 50 Mtrs and depositing where directed at a level not exceeding 1.5 Mtr above the starting point all as directed by Engineer in Charge. |
| 4 | M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in foundations/foot path etc complete all as specified and directed by Engr-in-Charge. |
| 5 | Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness below or above gound level including removal of debris complete all as specified and directed. |
| 6 | Taking up or down steel water tubing and connections of 15 mm dia including cleaning for refixing or remove unserviceable pipe from site complete all as specified and directed |
| 7 | All as item No 6 here in before but of size 20 mm bore. |
| 8 | All as item No 6 here in before but of size 25 mm bore. |
| 9 | All as item No 6 here in before but of size 40 mm bore. |
| 10 | All as item No 6 here in before but of size 50 mm bore. |
| 11 | All as item No 6 here in before but of size 80 mm bore. |
| 12 | All as item No 6 here in before but of size 100 mm bore. |
| 13 | Re-laying / re-fixing galvanised mild steel water tubing of 15 mm bore with and including all fittings laid in trenches, under floor or fixed to walls / ceilings complete all as specified and as directed. |
| 14 | All as per item No 13 here in before but of size 20 mm bore |
| 15 | All as per item No 13 here in before but of size 25 mm bore |
| 16 | All as per item No 13 here in before but of size 40 mm bore |
| 17 | All as per Item No 13 here in before but of size 50 mm bore |
| 18 | All as per item No 13 here In before but of size 80 mm bore |
| 19 | All as per item No 13 here In before but of size 100 mm bore |
| 20 | S & F galvanised steel water tubing medium grade 15 mm bore with all fittings such as bends, elbow, socket etc., laid under floors/trenches or on walls with all fixing arrangments including leakage testing as per IS:97684 complete all as specified and directed. |
| 21 | All as per item No 20 here In before but of size 20 mm bore |
| 22 | All as per item No 20 here In before but of size 25 mm bore |
| 23 | All as per item No 20 here In before but of size 40 mm bore |
| 24 | All as per item No 20 here In before but of size 50 mm bore |
| 25 | All as per item No 20 here In before but of size 80 mm bore |
| 26 | All as per item No 20 here In before but of size 100 mm bore |
| 27 | S & F in replacement of gun metal gate valve or glob valves of size 15 mm bore ISI marked with iron wheel head, screwed both ends for iron pipe including dismantling old u/s gate valve all as specified and directed |
| 28 | All as per item No 27 here in before but 20 mm bore |
| 29 | All as per item No 27 here in before but 25 mm bore |
| 30 | All as per item No 27 here in before but 40 mm bore |
| 31 | All as per item No 27 here in before but 50 mm bore |
| 32 | S & F in replacement of ductile iron (DI) sluice valve of 80 mm bore class PN-1.6, ISI marked (as per IS 14846 of 2000) heavy duty with flanged ends with high tensile SS spindle and gun metal check nut, iron hand wheel and fixing with providing suitable nuts, bolts, washers and rubber gasket for packing etc complete all as specified and directed. Note:- Any damage made to pipe lines, over head reservoir while replacing the sluice valve will be repaired by contractor on his own cost. |
| 33 | All as per item No. 32 here-in-before but 100 mm dia bore |
| 34 | All as per item No 32 here-in-before but 150 mm bore sluice valve. |
| 35 | All as per item No 32 here-in-before but 200 mm bore sluice valve. |
| 36 | Supply, laying & testing in repair, ductile iron pipe (DI) with socket and spigot ends of 200 mm bore class - K-9 , with ceramic epoxy lining /coating inside and external zinc coating with a bitumen finishing layer conforming to IS - 8329-2000 (Reaffiremed - 2005 Edition 4.1) suitable for \\"push on joints\\" in any lengths and including providing joints (Tyton joints) etc and including taking out old/ unserviceable CI / DI pipes from vertical position or from trenches etc complete all as specified and as directed. Note for item: (i) The cost of joints shall deemed to be included in unit rate quoted by the tenderer.(ii) Excavation and earth work shall be measured and paid seperately . |
| 37 | M&L for construction of Valve pit after dismantling of old u/s valve pit of Size 1050mm x1050mm x 1050mm (internal dimensions),Stone masonry constructton, includlng all necessary excavation and earth work in hard/ dense soil, returning,filling,in disposal of surplus soil to a distance not exceeding 50 m and depositing where directed , PCC in foundation of the mix (1:4..8) Type DQ (using 40 mm graded crushed stone aggregate), PCC Pocing in PCC(1:2:4), type BO using 12.5m crushed graded aggregate, brick masonry in cement mortar (1:4) rendering, 12 mm thick in cement mortar (1.4) Internalty,ftntshed even and fair and pointing flush externally as the work proceeds in the same mortar, Mild steel angle Iron 50x 50x6mm frame,MS sheet cover 3.15mm thick with handle and locking arrangment ,painting ,all the exposed MS work with two coats of synthetic enamel paint of tint as approved by the GE/AGE over a coats of red oxide pnmer and painting all the MS embedded in PCC with two coats of black bituminous paint etc, Complete all as specified and directed by Engineer in Charge. |
| 38 | M&L for construction of Valve pit after dismantling of old u/s valve pit of Size 900mm x900mmx600mm (internal dimensions), Stone masonry constructton, includlng all necessary excavation and earth work in hard/ dense soil,returning,filling,in disposal of surplus soil to a distance not exceeding 50 m and depositing where directed , PCC in foundation of the mix (1:4..8) Type DQ (using 40 mm graded crushed stone aggregate), PCC Pocing in PCC(1:2:4), type BO using 12.5m crushed graded aggregate, brick masonry in cement mortar (1:4) rendering, 12 mm thick in cement mortar (1.4) Internalty,ftntshed even and fair and pointing flush externally as the work proceeds in the same mortar, Mild steel angle Iron 50x50x6mm frame, MS sheet cover 3.15mm thick with handle and locking arrangment ,painting ,all the exposed MS work with two coats of synthetic enamel paint of tint as approved by the GE/AGE over a coats of red oxide pnmer and painting all the MS embedded in PCC with two coats of black bituminous paint etc, complete all as specified and directed by Engineer in Charge. |
| 39 | M & L for cutting of GI/DI/CI pipe of size 80 to 200 mm bore carefully for inserting fittings such as bend, tee, socket pieces, collar etc complete all as specified and as directed. |
| 40 | Supply and fix water pipe line route indicator made of size 400 x 300 x 25mm of precast RCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate complete including necessary marking as directed by Engineer in Charge. Note :- Route indicator should be writen as main water supply line complete as directed by Engr-in-Charge. |
| 41 | S& F in repair ductile iron (DI) pipe fittings for spigot and socketed or flanged pipes i.e, bends, reducer, tail pieces, tapers, tees, caps etc. of 80 mm to 300 mm bore pipe complete all as specified and as directed. |
| 42 | M & L for cutting of road a depth up to 1.5 mtr below the normal ground level and in width equal to external dia plus 300 mm for lay pipe line upto 300 mm dia across the road in horizontal position and making good the cut portion filled with PCC 1:3:6 type C-2 using 40 mm graded stone aggregates 200 mm thick from TOP over 300 mm thick hard core over filled earth to levelled with existing surfaces for smooth plying of vehicles etc complete all as specified and directed. The repaired portion will be match to the existing surface. Note:- Cost of PCC ,hard core,stones and Earth shall deemed to be included in unit rate quoted by the bidder. |
| 43 | M & L for PVC surface conduit point wiring complete with PVC insulated and unsheathed flame retardant low smoke low smoke and halogen ( FRLSH ) cable of 2.5 sqmm (nominal area) with stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 20 mm dia, clip, with MS terminal boxes (not less than 1.0 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including common earth dolly with 3 mm thick plastic laminated sheet top cover of approved make and colour including 2.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed. |
| 44 | Supply and install Hi wall Split Type Airconditioning units with indoor & outdoor (Non Inverter type) , 5 star 2 ton capacity with copper coil condensing , required copper pipe from Indoor unit to out door unit , with and including charging of refrigerent gas complete with cordless remote control unit and with cooling and heating function of all weather type as specified and directed by Engineer in charge. |
| 45 | Supply and install Hi wall Split Type Airconditioning units with indoor & outdoor (Non Inverter type) , 5 star 1.5 ton capacity with copper coil condensing , required copper pipe from Indoor unit to out door unit , with and including charging of refrigerent gas complete with cordless remote control unit and with cooling and heating function of all weather type as specified and directed by Engineer in charge. |
| 46 | S & F Sub main wiring with PVC insulated cable 2 single core 4 sq mm 1100 V grade with stranded copper conductor in and incl rigid PVC Casing and capping (ISI marked) incl all specials and provision of PVC insulated copper conductor single core 4.0 sq mm for earth continuity all as directed. Note:(i) 3 run of copper conductor 4 sqmm and one run of PVC conduit/ casing caping shall be measured as one run. |
| 47 | Supply and fixing modular enclosure single pole and neutral enclosure with two pin and earth plug and socket with one single MCB 20 Amp 240 Volt all as directed. |
| 48 | Supply and fix Voltage Stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input between 170 V to 250 V with out put voltage stabilized at 230 V with accuracy + 2.5% , copper winded and capacity 4.0 KVA all as specified. |
| 49 | Supply, installation, commissioning of Metal Top Deep Freezer 200/205 ltr Capacity single phase 240 volt 220 ltr, 50 Hz of approved make complete all as specified and directed by Engineer in Charge. Please Enable Macros to View BoQ information |
| 50 | Supply, installation, commissioning of Metal Top Deep Freezer 200/205 ltr Capacity single phase 240 volt 220 ltr, 50 Hz of approved make complete all as specified and directed by Engineer in Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender