Tender For Comprehensive Maintenance Of B/R & E/M Works In Wsa Area At Af Stn Jodhpur
Tender Value
35.85 Lakhs
Estimated cost
Bid Submission
07 Sep 2026
16 days left
EMD
71700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jodhpur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance Of B/R & E/M Works In Wsa Area At Af Stn Jodhpur
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good to disturbed ground complete all as specified and as directed by Engineer-in-Charge. |
| 2 | Taking down plastering in cement mortar in any position including removal of debris out side of MOD land complete all as specified and directed. |
| 3 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for and making good but portion ordered to be dismantled complete all as specified and directed by Engineer-in-Charge. |
| 4 | M&L for 100mm thick cement concrete (1:4:8) type D2 (using 40mm graded stone aggregates) in sub base complete all as specified and as directed by the Engineer-in-Charge. |
| 5 | M&L for 100mm thick PCC (1:2:4) type B1 (using 20mm graded stone aggregates) as in flooring, finishing the surface even and smooth without using extra cement complete all as specified and as directed. |
| 6 | M&L for providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design and pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness and size/ shape, made by table vibratory method using PU mould, laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; including dismantling/ taking out old broken tiles and thrown away out of MOD land, complete all as specified and directed. |
| 7 | Complete all as per Item No. 6 above but except tiling (refixing of existing/ old tiles) complete all as specified and directed. |
| 8 | M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregates) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed. |
| 9 | M&L for precast cement concrete (1:3:6) type C1 (using 20mm graded stone aggregate) block masonry with solid blocks, exceeding 10 cm in width and setting in cement mortar (1:6) complete all as specified including demolition of old masonry complete all as specified and as directed by Engineer-in-Charge. |
| 10 | M&L for walling of squared rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM (1:6) including demolition of old walling complete all as specified and as directed. |
| 11 | M&L for rendering 10mm thick in CM (1:6) on fair faces of brick work or concrete surfaces, finised even and smooth (without using extra cement) complete all as specifed and directed. |
| 12 | M&L for rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces, finised even and smooth (without using extra cement) complete all as specifed and directed. |
| 13 | M&L for preparation of new surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. |
| 14 | M&L for applying two coats of 100% premium acrylic exterior emulsion paint (Make:- Berger - Exterioir weathercoat glow/ platina weathercoat WC300, Asian- Apex unltima exterior emulsion, Jenson & Nicholson - Safe guard premium acrylic emulsion) having VOC less than 50gm/ litre and UV resistance as per IS : 15489 : 2004 , Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 llitre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90lit/ 10 Sqm over new surfaces complete all as specified and directed by Engineer-in-Charge. |
| 15 | M&L for preparation of old painted steel surfaces of any description over 10cm in width or girth not otherwise discribed and applying two coats of synthetic enamel paint all as specified and as directed. |
| 16 | M&L for preparation of old decorated plastered or unplastered surfaces of walls including brooming or steel wire brushing, scraping down smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks by applying white cement base putty in patches as required and applying two coats of oil bound distemper (white or tinted) to walls including cleaning of windows, doors, internal fittings and any other surfaces by removing splashes/ spots after finishing the job complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 17 | M&L for preparation of old decorated plastered or unplastered surfaces of walls including brooming or steel wire brushing, scraping down smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks by applying white cement base putty in patches as required and applying two coats of oil bound distemper (white or tinted) to walls including cleaning of windows, doors, internal fittings and any other surfaces by removing splashes/ spots after finishing the job complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysSep 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender