Tender For Repair To Drain, Footpath, Hardstanding, Compound Wall, Fencing, Gates And Retaining Wall Etc Under Zone-I Of Ge Brichgunj, Sri Vijaya Puram.
Tender Value
40 Lakhs
Estimated cost
Bid Submission
17 Sep 2026
1 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Drain, Footpath, Hardstanding, Compound Wall, Fencing, Gates And Retaining Wall Etc Under Zone-I Of Ge Brichgunj, Sri Vijaya Puram.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 10-Sep-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 17-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of fencing wire mesh any size and description complete all as specified and as directed. |
| 2 | Dismantling wrought iron or mild steel of any description not otherwise provided for complete all as specified and as directed. |
| 3 | Dismantling structural steel work including doors, gates but excluding framed truss etc.complete all as specified and as directed. |
| 4 | Dismantling of posts or struts (wood, steel or RCC) of any section along with old, unserviceable barbed wire, if any, including taking out embedded portion from ground and making good disturbed ground complete all as specified and as directed. |
| 5 | Excavation in post holes (or similar holes) each not exceeding 0.5 cum getting out in Hard/dense soil returning filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25cm watering and removing surplus soil to a distance not exceeding 50m and making good surfaces complete all as specified and as directed. |
| 6 | M&L for Plain cement concrete 1:3:6, type C2, (using 40mm graded stone aggregate) as in foundations, filling mass concrete, post holes etc complete all as specified and as directed. |
| 7 | M&L for Reinforced cement concrete 1:2:4, type B-1, (20mm graded stone aggregate) as in precast posts, fencing posts, straining or terminal posts, struts etc for fencing, average sectional area exc 100 Sq cm, but not exc 250 Sq cm with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed complete all as specified and as directed. |
| 8 | Supply only PVC coated 1mm thick, chain link fencing exc 2.00 kg but n.exc 3.50 kg per sqm with size of mesh 50 mm x 50 mm and thickness of wire n.exc 2.83 mm complete all as specified and as directed. |
| 9 | Fixing only PVC coated chain link fencing including fixing of line wires any mesh, size and any type of standards, rails, straining bolts etc including provision of binding wires complete.(Supply of MS line wire and flat iron bolt & nuts measured and paid seperately) complete all as specified and as directed. |
| 10 | Supply only 6mm dia wire PVC coated for support/line wire to chain link fencing complete all as specified and as directed. |
| 11 | S&F in Repair galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rail straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and as directed (Each line wire to be measured). |
| 12 | S&F Mild steel angles, bars, flats etc as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 13 | S&F Mild steel bolts with hexagonal or square head one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut exc 5 cm long n.exc 10 cm long dia metre of neck exceeding 11 to 15 mm complete all as specified and as directed. |
| 14 | Excavating in trenches for hard/dense soil, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and as directed |
| 15 | Excavating over areas, n exc 1.5 m deep and getting out in any type of Soil complete all as specified and as directed. |
| 16 | M&L for Plain cement concrete 1:3:6, type C2, using 40 mm graded stone aggregate, as in surface channels/drains etc, complete all as specified |
| 17 | M & L for Reinforced cement concrete M-30 (Design mix concrete) (using 20 mm graded stone aggretate) as in foundations incl rafts, footings and mass concrete complete all as specified and as directed. |
| 18 | M & L for Reinforced cement concrete M-30 (Design mix concrete) (using 20 mm graded stone aggretate) as in retaining walls and the like any thickness above top of footing including attached pillasters and butteresses complete all as specified and as directed. |
| 19 | M & L for Reinforced cement concrete- M -30 (Design Mix) as in columns, pillars, piers,posts and struts etc complete all as specified and as directed. |
| 20 | M&L for Use and removal of steel form work to sides of concrete foundations, footings,rafts and raft beams sides and soffits of foundation and plinth beams and similar work for flat/curved surface complete all as specified and as directed. |
| 21 | M&L for Use and removal of steel form work to faces of walls retaining walls, abutments, parapets and like for flat rough finished surface complete all as specified and as directed. |
| 22 | M&L for Use and removal of steel form work to faces of walls retaining walls, abutments, parapets and like for flat fair finished surface complete all as specified and as directed. |
| 23 | M&L for use and waste of Formwork flat or curved to to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed. |
| 24 | M&L for TMT bars 10mm dia and over cut to length, bent to shape required including cranking and bending spirally for hopping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90mm dia) or securing with clips complete all as specified and as directed. |
| 25 | All as per item No 25 above but 5 to 10 mm dia as in stirrups, spacer etc complete all as specified and as directed. |
| 26 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 27 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-410W(GdeE-250) quality B complete all as specified and as directed. |
| 28 | S & F MS Steel work in tubular trusses and tubular posts/ purlins including special shaped washers etc., complete using ERW or induction butt welded tubes conforming to IS :1161-1979 grade st-240 including notching, drilling, fitting, riveting and/or welding or connecting with bed plate, bolt and nuts complete all as specified and as directed. |
| 29 | S & F Plates (Plain or chequered), channels, square cut or notched (ordinary and counter sunk) forming holes with attachment etc and fixed by riveting or welding or with nut and bolts (including nut and bolts) conforming to Fe- 410-W Grade E- 250, quality B, complete all as specified and as directed. |
| 30 | M&L for Preparation new steel surfaces of any description exc 10cm width or girth when unconnected with other painting or when painted in a different tint, and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 31 | M&L for Preparation new steel surfaces of any description n.exc 10cm width or girth when unconnected with other painting or when painted in a different tint, and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed. |
| 32 | M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specificed and as directed |
| 33 | Removing excavated soil exc 250 mtr but n.exc 500mtr and depositing where directed complete all as specified and as directed. |
| 34 | Dismantling Plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings in roof covering complete all as specified and as directed. |
| 35 | S&F Pre-painted galvalume aluminium zinc coating GI based (corrugated/semi corrugated) sheet 0.50mm thick as per approved profile, coloured, having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screwscomplete all as specified and as directed. |
| 36 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 37 | S&F Plain, Aluminium sheeting 0.56mm thick, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and as directed. |
| 38 | S&F Polycarbonate sheet 6mm thick, fixed with aluminium strips and coach screw and washer in roof wall etc and filling gaps with silicon complete all as specified and as directed. |
| 39 | Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 40 | M&L for Plain cement concrete 1:4:8, 75mm thick, type D2 (using 40mm graded stone aggregate) as in sub base of flooring/hard standing,Path way etc complete all as specified and as directed. |
| 41 | M&L for Plain cement concrete 1:2:4, 50mm thick , type B2 (using 20mm graded stone aggregate) as in flooring etc finishing the surface even and fair complete all as specified and as directed. |
| 42 | Dismantling of floor, or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premishes complete all as specified and as directed. |
| 43 | M&L for Chequered cement concrete tiles 300x300x25mm thick size, set jointed and pointed in neat cement slurry incl 15mm thick in cement mortar 1:6, bedding layer of mortar complete all as specified and as directed. |
| 44 | M&L for Heavy duty Vitrified tiles of size 300x300x 8 to 10mm thick or high dimension (except thickness) of any colour any design durastone weather proof impact resistant abrasion resistant exterior tiles as in floors etc set and jointed in neat cement slurry over and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and as directed. |
| 45 | M&L for Spreading and levelling for sand 50mm thick as cushioning for paver blocks etc, complete all as specified and as directed. |
| 46 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 standards of 60mm thickness, M-35 grade, laid over with grey cement and pigments complete all as specified and as directed. |
| 47 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3, including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed. |
| 48 | Demolition of Reinforcement cement concrete of any description and in any position including removal of all demolished material form site complete all as specified and as directed. |
| 49 | M&L for Precast Reinforcement cement concrete 1:2:4, type B1 (using 20mm graded stone aggregate) as in cover slab for drains, manholes, septic tank and similar work set in CM 1:6, incl necessary form work and placed in position complete all as specified and as directed. |
| 50 | Demolition of Precast Concrete Block work built in Cement Mortar including all quoins arches pillars etc complete all as specified and as directed. |
| 51 | M&L for Precast cement concrete solid block masonry with solid blocks using PCC 1:3:6, type C1 (using 20mm graded stone aggregate), exc. 10cm in width, set in CM 1:4 complete all as specified and as directed. |
| 52 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete complete all as specified and as directed. |
| 53 | Taking down cement plaster of any desciption from wall (drain) including raking out joints hacking for key, scrubbing down with water etc, complete all as specified and as directed |
| 54 | M&L for Rendering 10mm thick in cement mortar 1:4 on fair faces of brick work/block masonry or concrete surfaces finished fair and even complete all as specified and as directed. |
| 55 | M&L for Rendering 15mm thick on fair faces of PCC block work or concrete surfaces in cement mortar 1:4, finished even and fair without using extra cement, complete all as specified and as directed. |
| 56 | Demolition of Cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 57 | M&L for Plain cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in coping of wall complete all as specified and as directed. |
| 58 | M & L for Preparation of newly plastered/unplastered surfaces of wall and applying two coats of weather Proof Exterior acrylic emulsion paint with anti fungal property over a coat of primer complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 17, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 daySep 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 daySep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender