Tender For Repair/ Replacement Flooring, Joinary, Plastering, Sanitary, Plumbing And Other Misc B/R Work In Otm Accn Of 505 Eme Bn And Cicg Under The Aor Of Age B/R-I Of Ge (North) Delhi Cantt-10
Tender Value
48 Lakhs
Estimated cost
Bid Submission
09 Sep 2026
19 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Replacement Flooring, Joinary, Plastering, Sanitary, Plumbing And Other Misc B/R Work In Otm Accn Of 505 Eme Bn And Cicg Under The Aor Of Age B/R-I Of Ge (North) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of plain cement concrete (unreinforced) of any thickness of any description and in any position not specifically provided for complete all as specified and as directed. |
| 2 | M&L for vitrified coloured tiles shade as approved 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 1.0 sqm, in floors, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including screed bed or bedding layers of mortars 15mm thick in CM 1:6, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 3 | All as per the description of srl item No 02 above but as in vertical surfaces such as skirting/ dado over and including 10mm thick rendering in CM (1:4). |
| 4 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick joint free area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors over 15mm thick screed bed in cement mortar 1:6 set and jointed in neat cement slurry and pointed in coloured cement.including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed. |
| 5 | All as per the description of srl item No 04 but in vertical surface as skirting, dado and risers to steps over and including10 mm thick rendering/backing coat in cement mortar 1:4 etc. |
| 6 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors over 15mm thick screed bed in cement mortar 1:6 set and jointed in neat cement slurry and pointed in coloured cement. including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed. |
| 7 | M&L glazed ceramic coloured tiles in vertical surface area of each tile between 0.14 to 0.18 Sqm each set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thick in CM (1:4) and finished rough, complete including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 8 | M&L 3D exterior designer coloured matt finished wall tiles 300x600mm design as approved over 10mm thick rough finished rendering in cement mortar 1:4 including taking down and removal from site complete all as specified and directed. |
| 9 | M&L 18 to 20 mm thick pre-polished machine cut Kota stone slab as in flooring over and including 15mm thick screed bed in cement mortar 1:6, laid over cement slurry @ 3 Kg/Sqm and jointed with grey cement slurry mixed with pigment to match with shade of slab including molding the edge of slab complete all as specified and as directed. |
| 10 | M&L18 to 20 mm thick pre-polished machine cut Kota stone slab as in riser or vertical surface over and including 10 mm thick rendering in cement mortar 1:4, and jointed with grey cement slurry mixed with pigment to match with shade of slab including molding the edge where as specified and as directed. |
| 11 | M&L plain cement concrete 1:4:8, type D2( using 40mm graded stone aggregate) 75mm thick as in sub base of floor complete all as specified and directed . |
| 12 | M&L 25mm thick cement concrete type B-0, 1:2:4 (using 12.5 mm graded aggregate) for levelling course in floors complete all as specified and directed. |
| 13 | Demolition of reinforced cement concrete (Reinforcement cut as required to facilatate demolition) of any description and in any position not otherwise specially provided |
| 14 | M&L for Reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in chajjas complete (reinforcement to be measured separately). |
| 15 | M&L Reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete (reinforcement to be measured separately). |
| 16 | Mild steel TMT bars 6 to 8 mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete. |
| 17 | Formwork to sides and soffits of slabs n. exc. 200 mm thick and similar works rough finished surfaces of concrete complete. |
| 18 | Use and waste of formwork to chullah hoods, chajjas, throughs and similar items including edges. |
| 19 | M&L for old size brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 including demolition of brick work complete all as specified and directed. |
| 20 | Taking down existing cement plaster or grit finished or complete removal of existing pointing and finishes including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 21 | M&L 10mm thick ready mix plaster (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) on brick work on concrete surface of wall internal surfaces finished even and smooth all as specified and directed by GE. |
| 22 | M&L 15mm thick ready mix plaster (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) on brick work on concrete surface of wall external surfaces finished even and smooth all as specified and directed by GE. |
| 23 | M&L 5mm thick ready mix plaster (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) on concrete surface or in ceiling surfaces finished even and smooth all as specified and directed by GE. |
| 24 | M&L for two coats of cement base paint on new plastered/unplastered surfaceof wall using auto-roller and airless paint sprayer over one coat of acrylic water based interior grade primer @ 0.8 ltr (undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application of asian Paints Trucare graco or equivalent having an electric motor of min. 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent quotes incl Complete removing of existing treatment by scrapping with Asian Paints TruCare Wall Sander: L- 01/H-01 (having mechanical vacuum mechanism) or equivalent having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\" to 9\\" to make the surface free from dust, loose paint etc. by skilled labour complete all as specifiec and as directed. |
| 25 | M&L for applying two coats of Oil Bound Distemper on new plastered/unplastered surface of wall using Airless spray technology withmax working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paintusage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower .Note:- Sanding of surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer over M&L waterproof cement based putty @ 1Kg(undiluted) per sq mtr of average thickness 1mm of Asian Paints or its equivalent over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete all Sanding of the putty surface with Asian Paints Tru Care Wall Sander :-01H-01 or equivalent (having mechanical vaccume mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above having dia of 7\\"/9\\" to make the surface free from dust etc. by skilled labour step 1) Mix the putty powder by adding 40-50% water and mix it with Asian Paints Trucare Putty mixer (Trucare Putty mixer with min 1400 W power having mixer rod of industrial stell grade 45 with the mixing capacity of min 2.5 kg putty per minute). Step 2- Apply the first coat the prepared mixer with the help fully automatic airless spray machine of putty application of Asian Paints Trucare Grace Spray Machine (Model:; EH 230 DI) or equivalant having a DC electric motor of 3.3 KW having flow speed of max 6 ltrs per minutes with a miximum pressure 230 bar having maximum tip size 0.041\\" Step 3) Allow 6-8 hrs time to dry the putty surface complete all as specifiec and as directed. |
| 26 | M&L for Preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete. |
| 27 | M&L for preparation of wall surfaces and applying waterproof cement based putty, one coat primer and two coats Oil Bound Distemper by Airless Spray Technology on new/old plastered wall surfaces complete all as specified and directed. Preparing new or old plastered/previously painted wall surfaces by scrapping and mechanical sanding to obtain an even, smooth and dust-free surface and applying waterproof cement based wall putty of approved make @ 1.00 Kg per Sqm (undiluted) for average thickness of 1 mm, followed by one coat of alkali resistant water-based wall primer and two coats of Oil Bound Distemper by fully automatic airless spray application complete.The work shall comprise the following operations:-Surface preparation including removal of loose particles, scrapping of old painted surfaces wherever required and mechanical sanding using wall sander having speed between 1500 and 2700 RPM with inbuilt vacuum dust extraction system and sanding pads of minimum 240 grit and 7\\"/9\\" diameter or equivalent approved equipment. Mixing of waterproof cement based putty by adding 40% to 50% clean water using mechanical putty mixer having minimum 1400 W power and capable of mixing not less than 2.5 Kg of putty per minute. Applying waterproof cement based wall putty by fully automatic airless spray machine having minimum 3.30 KW DC electric motor, maximum flow rate of 6 litres per minute, working pressure not less than 230 bar and tip size up to 0.041 inch or equivalent approved equipment, to achieve an average thickness of 1 mm and consumption of 1 Kg per Sqm. Allowing the putty surface to dry for 6 to 8 hours and carrying out mechanical sanding using vacuum-assisted wall sander to achieve a smooth and uniform finish free from dust and surface imperfections. Applying one coat of alkali resistant water-based wall primer over the prepared putty surface by airless spray machine complete, ensuring uniform coverage and manufacturer's recommended spreading rate. Applying two coats of Oil Bound Distemper over the primed surface by Airless Spray Technology using airless spray machine having maximum working pressure of 3300 PSI or higher, capable of operating a single spray gun with material hose length up to 30 metres and suitable extension accessories for hard-to-reach locations to ensure uniform penetration and superior finish with minimum wastage and manpower. The airless spray machine shall be of reputed make and shall be equipped with ProGuard or equivalent technology, pressure monitoring system and paint usage tracking facility and shall be certified or recommended by the paint manufacturer for application of wall finishes.The rate quoted shall include all labour, materials, scaffolding, mechanical sanding equipment with dust extraction system, airless spray machines, hoses, spray guns, mixers, primers, putty, Oil Bound Distemper, consumables and all incidental charges necessary for complete execution of the work. |
| 28 | M&L for preparation of wall surfaces and applying waterproof cement based putty, one coat primer and two coats Oil Bound Distemper by Airless Spray Technology on new/old plastered wall surfaces complete all as specified and directed. Preparing new or old plastered/previously painted wall surfaces by scrapping and mechanical sanding to obtain an even, smooth and dust-free surface and applying waterproof cement based wall putty of approved make @ 1.00 Kg per Sqm (undiluted) for average thickness of 1 mm, followed by one coat of alkali resistant water-based wall primer and two coats of Oil Bound Distemper by fully automatic airless spray application complete.The work shall comprise the following operations:-Surface preparation including removal of loose particles, scrapping of old painted surfaces wherever required and mechanical sanding using wall sander having speed between 1500 and 2700 RPM with inbuilt vacuum dust extraction system and sanding pads of minimum 240 grit and 7\\"/9\\" diameter or equivalent approved equipment. Mixing of waterproof cement based putty by adding 40% to 50% clean water using mechanical putty mixer having minimum 1400 W power and capable of mixing not less than 2.5 Kg of putty per minute. Applying waterproof cement based wall putty by fully automatic airless spray machine having minimum 3.30 KW DC electric motor, maximum flow rate of 6 litres per minute, working pressure not less than 230 bar and tip size up to 0.041 inch or equivalent approved equipment, to achieve an average thickness of 1 mm and consumption of 1 Kg per Sqm. Allowing the putty surface to dry for 6 to 8 hours and carrying out mechanical sanding using vacuum-assisted wall sander to achieve a smooth and uniform finish free from dust and surface imperfections. Applying one coat of alkali resistant water-based wall primer over the prepared putty surface by airless spray machine complete, ensuring uniform coverage and manufacturer's recommended spreading rate. Applying two coats of Oil Bound Distemper over the primed surface by Airless Spray Technology using airless spray machine having maximum working pressure of 3300 PSI or higher, capable of operating a single spray gun with material hose length up to 30 metres and suitable extension accessories for hard-to-reach locations to ensure uniform penetration and superior finish with minimum wastage and manpower. The airless spray machine shall be of reputed make and shall be equipped with ProGuard or equivalent technology, pressure monitoring system and paint usage tracking facility and shall be certified or recommended by the paint manufacturer for application of wall finishes.The rate quoted shall include all labour, materials, scaffolding, mechanical sanding equipment with dust extraction system, airless spray machines, hoses, spray guns, mixers, primers, putty, Oil Bound Distemper, consumables and all incidental charges necessary for complete execution of the work. |
| 29 | M&L for Preparing old decorated plastered surfaces of ceiling and applying one coats of white wash complete. |
| 30 | M&L for preparation of old plastered surfaces of wall and applying two or more coat of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489;2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm using auto-roller and airless paint sprayer incl Complete removing of existing treatment by scrapping with Asian Paints TruCare Wall Sander: L- 01/H-01 (having mechanical vacuum mechanism) or equivalent having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\" to 9\\" to make the surface free from dust, loose paint etc. by skilled labour complete all as specifiec and as directed. |
| 31 | M&L for two coats of cement base paint on old plastered/unplastered surface of wall using auto-roller and airless paint sprayer over one coat of acrylic water based interior grade primer @ 0.8 ltr (undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application of asian Paints Trucare graco or equivalent having an electric motor of min. 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent quotes incl Complete removing of existing treatment by scrapping with Asian Paints TruCare Wall Sander: L- 01/H-01 (having mechanical vacuum mechanism) or equivalent having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\" to 9\\" to make the surface free from dust, loose paint etc. by skilled labour complete all as specifiec and as directed. |
| 32 | Dismantling wrought iron or mild steel work of any description not other wise provided all as specified and directed |
| 33 | S&F for steel gate made of MS section, grill work including holdfast, 2x MS hinges, stoppers, bushes, and all as CI decorative pieces, locking arrangement etc complete all as specified and directed. |
| 34 | Mild steel conforming to Fe 410-0 or Fe 310-0 in framed work such as grills, gratings, door frame etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; ladders; railings and similar work complete. |
| 35 | M&L applying two coats of synthetic enamel paint on new steel surfaces of any description over 10cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete. |
| 36 | Supply and laying of 20mm outer dia of CPVC pipe SDR 11 and plain CPVC SDR 11 fittings on wall/ceiling or laying in floors complete including brass CPVC fittings (i.e elbow, Tee, MTA/MBTA,FTA/FBTA, Tank adaptor, Union, etc suitable for 15mm bore bath fittings) including taking down of old tubing complete all as specified and directed. Note:- length of pipe with fittings to be measured for payment, no extra payment should be made for fittings). |
| 37 | Supply and laying of 25mm outer dia of CPVC pipe SDR 11 and plain CPVC SDR 11 fittings on wall/ceiling or laying in floors complete including brass CPVC fittings (i.e elbow, Tee, MTA/MBTA,FTA/FBTA, Tank adaptor, Union, etc) including taking down of old tubing complete all as specified and directed. Note:- length of pipe with fittings to be measured for payment, no extra payment should be made for fittings). |
| 38 | S&F Steel water tubes, medium grade, ISI marked, galvanised, 15 mm bore with all fittings, fixed to walls and ceiling or laid in floors including taking up or down steel tubing and connections complete. |
| 39 | S&F Steel water tubes, medium grade, ISI marked, galvanised, 20 mm bore with all fittings, fixed to walls and ceiling or laid in floors including taking up or down steel tubing and connections complete. |
| 40 | Cutting chases in brick walls, pinning in, making good any thickness up to wall tile to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubings or conduit wiring, etc and making good, cutting exceeding 20cm girth complete. |
| 41 | S&F in repair rotational moulded 500 lit capacity polythelene water storage tanks ( cylindrical verticle with closed top) hoisted and fixed in position all as specified |
| 42 | S&F in repair rotational moulded 1000 lit capacity polythelene water storage tanks ( cylindrical verticle with closed top) hoisted and fixed in position all as specified |
| 43 | S&F in repair 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete. |
| 44 | S&F in repair float valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic wall, screwed for iron pipe and fixed for 20 mm bore size (Minimum weight 210gms), complete. |
| 45 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or in floor 75mm bore including demolition/taking down PVC/ drain/Rain water pipe complete. |
| 46 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110 mm bore including demolition/taking down PVC/ drain/Rain water pipe complete. |
| 47 | S&F PVC (SWR) bends any radius, 75 mm bore, complete. |
| 48 | S&F PVC (SWR) bends in repair with access door any radius, 75 mm bore, complete. |
| 49 | S&F PVC (SWR) bends any radius, 110 mm bore, complete. |
| 50 | S&F PVC (SWR) bends with access door any radius, 110 mm bore, complete. |
| 51 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 52 | S&F in repair Soap dish disc (oval) type, mild steel chromium plated of approximate size 100 x 50 x 10 mm, complete. |
| 53 | S&F in repair sheet Glass shelf assembly consisting of 5.5 mm thick sheet glass self 12 cm wide with chromium plated bracket guard and railing 60 cm long. |
| 54 | S&F in repair 75 mm PVC (SWR) floor trap, plain with grating doom including jointing with solvent cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate mix with WPC complete all as specified and as directed. |
| 55 | S&F in repair Tubular towel rail of brass chromium plated, 20 mm dia, 'D' type, 60 cm long between flanges complete. |
| 56 | S&F in repair Bib taps cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15 mm bore complete. |
| 57 | S&F in repair Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions 15 mm bore complete. |
| 58 | S&F in repair 10 litre capacity PVC low level flushing cistern ‘ white’ with inlet, float valve including bracket with 32mm dia PVC waste/flush bend pipe appx 600 mm long complete. |
| 59 | S&F in repair PVC connection 600mm long and15 mm dia with brass fly nut at both ends complete. |
| 60 | S&F in repair Vitreous china wash down water closet pan (pedestal pattern) including trap, white including fixing bolts, flushing cistern and flush pipe connection to trap and to flushing pipe in bend cluding provn of cement concrete beading complete all as specified and directed. Make - Cera/Jaquar/Parryware |
| 61 | S&F in repair vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of tap, waste fitting etc complete. |
| 62 | Supply only EWC Seat cover white colour as approved of PVC closed pattern with flat bottom and mild steel lchromium plated or aluminised hinging device complete all as specified and directed. Make - Cera/Jaquar/Parryware |
| 63 | S&F in repair CP bottal trap, plug type with wall flange complete all as specified and directed. |
| 64 | S&F in repair vitreous china urinals bowl, half stall flat back large of size white with grating and union for discharge pipe complete including waste coupling provide and fixing plugs bedding urinal against wall in CM 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement including urinal spreader complete all as specified. |
| 65 | S&F in repair Chromium plated brass angle valve concelled type for 15mm bore pipe, fixed in repairs complete all as specified and directed. |
| 66 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 67 | Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) all as specified and directed. |
| 68 | Taking down chowkhats of frames exc 1.50 sqm but n. exc 4.0 sqm with shutters (without taking off shutters from the frames) all as specified and directed. |
| 69 | Taking down door shutters of any description exc 1 Sqm & n.exc 2 Sqm each complete all as specified and directed |
| 70 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45mm x 70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 71 | S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge.Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)complete all as specified and directed. |
| 72 | S&F Flush shutters 30 mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides with leaping and beading complete. |
| 73 | M&L for applying two coat of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth complete all as specified and as directed. |
| 74 | Providing and fixing factory made uPVC white colour casement (Openable/sliding as per required at site) window made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm) Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system and 5mm thick glazing with selected quality glass and stainless steel wiremesh. Note:- The unit rate quoted by contractor include cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) Area exceeding 1.00 sqm but not exceeding 2.00 sqm each. |
| 75 | Providing and fixing factory made uPVC white colour casement (openable) Door made of extruded profile wilh wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), Tprofile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: casement door handle made of zinc alloyed (white powder coated).Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) and 5mm thick glazing with selected quality glass. Note:- The unit rate quoted by contractor including cost of glass and all other connected accessories. |
| 76 | S&F 12mm thick plain or frosted toughned glass for door shutters with frame of area exc 1.00 Sqm but n.exc 3.00 Sqm including floor door spring, stainless steel handle 600mm long and 3 Nos hinges, door seal, necessary arrangements required for fixing it in position complete as specified and directed. |
| 77 | S&F 100 mm long mild steel butt hinges, cold rolled, medium weight complete all as specified and directed. |
| 78 | S&F for 125mm long stainless steel tower bolt of extruded section complete all as specified and directed. |
| 79 | S&F 150mm long stainless steel handles, cast type complete all as specified and directed. |
| 80 | S&F 300mm long aluminium alloy, anodized sliding door bolt with hasp stapple ( bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed. |
| 81 | S&F in repair Stainless Steel Cromium Plated tubing of 25 mm dia curtain rod fancy type including fancy type CP brabs brackets (wall to wall or flush to wall) with finials or end caps decorative type as approved by GE for securing to curtain rod to wall in position, fixed in repair complete. |
| 82 | S&F in repair roller blinds premium korean fabric/zebra roller blinds or as approved to windows/opening including top and bottom frame/rail complete all as specified and directed |
| 83 | M&L for two coats of synthetic enamel paint on old steel painted surfaces including preparation of surfaces of any description not otherwise descriped over 10 cm width or grith complete all as specified and directed. |
| 84 | M&L for two coats of synthetic enamel paint on old wooden painted surfaces including preparation of surfaces of any description not otherwise descriped over 10 cm width or grith complete all as specified and directed. |
| 85 | M&L cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair without using extra cement incl making joints at every 2.5m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight including necessary form work and complete all as specified. Please Enable Macros to View BoQ information |
| 86 | M&L cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair without using extra cement incl making joints at every 2.5m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight including necessary form work and complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysSep 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender