Tender For Repair / Maintenance Of Water Supply, Distributed Pipe Line Including Cleaning Of Overhead Tanks, Open Well, Bore Well, Filteration Plant Along With Certain Other Connected Works In Tech Area At Af-I Under Ge (Af) Jamnagar No.2
Tender Value
40 Lakhs
Estimated cost
Bid Submission
09 Sep 2026
17 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jamnagar → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Maintenance Of Water Supply, Distributed Pipe Line Including Cleaning Of Overhead Tanks, Open Well, Bore Well, Filteration Plant Along With Certain Other Connected Works In Tech Area At Af-I Under Ge (Af) Jamnagar No.2
BOQ
| Sl. No. | Item Description |
| 1 | M&L for cleaning of RCC overhead tank at various location at (ATC, 2222 Sqn MT yard, Tropo) of capacity 10000 Ltrs by continues dewatering till the complete water is removed from the overhead tank by using suitable capacity non clog diesel engine pump set and cleaning of all the accumulated sediments, sludge and foreign particles by using required chemical as per IS standard up to bottom of overhead tank & removing the same to a distance exc 250 metre but not exceeding 500 metre and depositing where directed by Engr-in-Charge. |
| 2 | M&L for cleaning of RCC UG sump at various locations inside tech area continues dewatering till the complete water removal from the UG sump by using suitable capacity non clog diesel engine pump set and cleaning of all the accumulated sediments, sludge and foreign particles up to bottom of UG sump & removing the same to a distance exc 250 metre but not exceeding 500 metre and depositing where directedby Engr in Charge. |
| 3 | New WSA fire fighting pump house of capacity 50000 Glns |
| 4 | New Vijaywell pump house of capacity 25000 Glns |
| 5 | Hanger No-1, 2, 3, 4, Tropo of cap up to 50000 Ltrs |
| 6 | BP No- 19, 21, 24, 27, 28, 37 and 38 Each BP having 2 Nos Rain water sump appx size 3x3x4Mtr |
| 7 | Fountan cleaning at AOC office oppsite road and VIP Lounge as per direction of Engr in Charge |
| 8 | Note for UG sump:-(i) Dewatering process shall be continuous as per working hrs. Provn of standby arrangement of pump on failure of working pump set shall be arranged by contractor without any extra cost. (ii) Adequate skilled man power shall be employed for cleaning. (iii) All protective arrangement/instrument during cleaning and dewatering shall be provided shall be deemed to be included in the cost of cleaning. (iv) Work shall be executed by experienced persons in trade and all safety precautions as per CP norms will be ensured during cleaning of open well/UG sump/Overhead tank by the contractor. (v) An intimation will be given to Engr in charge before cleaning and after cleaning of work. |
| 9 | M&L for repairing / servicing of 7.5 to 15HP capacity submersible pump by dismantling the pump and taking out defective/unsv/worn out parts of submersible pump set and replacement/servicing of all defective parts as under and reassebling the pump set including testing complete all as specified and directed. |
| 10 | Stainless steel Shaft as per existing dia incl metaling of pump shaft, grinding & polishing |
| 11 | Thrust plate |
| 12 | Distance sleeves |
| 13 | Bearings as per existing (02 nos in each pump) with bearing sleeve |
| 14 | Stage Ball |
| 15 | Neck Ring |
| 16 | Oil seal |
| 17 | Non return valve cast iron |
| 18 | Stainless steel filter cage |
| 19 | Impeller or diffuser stainless steel as per casing dia |
| 20 | Alignment of pump impeller with motor shaft |
| 21 | Bearing bush made of rubber |
| 22 | M&L for repairing / servicing of electric motor cap 7.5HP to 15 HP couplled to submersible pump, AC 3 phase, by dismantling the motor and coupling pulley and transport to work shop for repair. Removal of existing burnt out copper winding wire, cleaning of slots using suitable reagents and rewinding with super enamelled copper winding wire of appropriate gauge to achieve required RPM, varnsihing, drying, ovening, overhauling, greasing, painting and brought back to existing location and assembling the same after complete repair, connecting with pump and making necessary electrical connection and testing of motor after installation complete all as specified and directed.Note: Contractor shall be responsible for maintaining required RPM after repair. Non compliance of speed considered as incomplete repair. |
| 23 | M&L for repairing / servicing of 20 to 30 HP capacity submersible pump by dismantling the pump and taking out defective/unsv/worn out parts of submersible pump set and replacement/servicing of all defective parts as under and reassembling the pump set including testing complete all as specified and directed:- |
| 24 | Stainless steel Shaft as per existing dia incl metaling of pump shaft, grinding & polishing |
| 25 | Thrust plate |
| 26 | Distance sleeves |
| 27 | Bearings as per existing (02 nos in each pump) with bearing sleeve |
| 28 | Stage Ball |
| 29 | Neck Ring |
| 30 | Oil seal |
| 31 | Non return valve cast iron |
| 32 | Stainless steel filter cage |
| 33 | Impeller or diffuser stainless steel as per casing dia |
| 34 | Alignment of pump impeller with motor shaft |
| 35 | Bearing bush made of rubber |
| 36 | M&L for repairing / servicing of electric motor cap 20.0 HP to 30 HP couplled to submersible pump, AC 3 phase, by dismantling the motor and coupling pulley and removal of existing burnt out copper winding wire, cleaning of slots using suitable reagents and rewinding with super enamelled copper winding wire of appropriate gauge to achieve required RPM, varnsihing, drying, ovening, overhauling, greasing, painting and assembling the same after complete repair, connecting with pump and making necessary electrical connection and testing of motor after installation complete all as specified and directed.Note: Contractor shall be responsible for maintaining required RPM after repair. Non compliance of speed considered as incomplete repair. Please Enable Macros to View BoQ information |
| 37 | M&L for repairing / servicing of electric motor cap 20.0 HP to 30 HP couplled to submersible pump, AC 3 phase, by dismantling the motor and coupling pulley and removal of existing burnt out copper winding wire, cleaning of slots using suitable reagents and rewinding with super enamelled copper winding wire of appropriate gauge to achieve required RPM, varnsihing, drying, ovening, overhauling, greasing, painting and assembling the same after complete repair, connecting with pump and making necessary electrical connection and testing of motor after installation complete all as specified and directed.Note: Contractor shall be responsible for maintaining required RPM after repair. Non compliance of speed considered as incomplete repair. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysSep 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender