Tender For Construction Of Toilet Unit At Wadeshwar Mandir Pasure Tal-Bhor Dist-Pune
Tender Value
2.53 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
0 days left
EMD
2536
Bank guarantee accepted
Document Fee
236
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Toilet Unit At Wadeshwar Mandir Pasure Tal-Bhor Dist-Pune
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 27-Aug-2026 | 2ND CALL | Date | 31-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | ITEM NO.: 1 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means (INo21-02, PgNo 153) (STATE SSR) Item Spec: (Bd.A.1 Page No. 259) |
| 2 | ITEM NO.: 2 Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Mean..... (INo21-06 PgNo 153) (STATE SSR) Item Spec: (Bd.A.2 Page No. 259) |
| 3 | ITEM NO.: 3 Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/granite/quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering. formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC WITHOUT SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed)....(INo24-01 NS, PgNo 175) (STATE SSR) Item Spec: (Bd. E. 1 Page No. 287) RA NO.: 1 |
| 4 | ITEM NO.: 4 Providing uncoursed rubble masonry of trap/granite/quartzite/gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls/in plinth of external walls including bailing out water manually, striking joints on un exposed faces and watering etc.complete.....(INo28-01, PgNo 199) (STATE SSR) Item Spec: (Bd.H.1 Page No. 329) RA NO.: 2 |
| 5 | ITEM NO.: 5 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete..... (INo27-01, PgNo 197) (STATE SSR) Item Spec: (Bd. G. 1 Page No. 313) RA NO.: 3 |
| 6 | ITEM NO.: 6 Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete.....(INo21-36, PgNo 157) (STATE SSR) |
| 7 | ITEM NO 7 Filling in plinth and floors with contractors material brought from outside and approved by Engineer incharge in layers of them to 200m, including watering and compaction etc complete (No21-37, PgNa 157) (STATE SSR) tem Spec (Bd.A.11 Page No. 203) RA NO:4 |
| 8 | ITEM NO 8 Providing second class Burnt Brick masonry with conventional IS. type bricks in cement mortar 1:6 in superstructure Including striking joints, raking out joints, watering and scaffolding etc. Complete (No27-05, PgNo 197) (STATE SSR) Item Spec: RA NO.5 |
| 9 | ITEM NO.: 9 Providing and fixing cold rolled steel hollow door frame 4.000 105mm x 60mm for anysizes including hold fast hinges, tie members with red oxide and gray paint etc. complete as per I.S.I. specifications and code of practice prescribed including anticorrosive treatment as directed by the engineer.....(INo39-49, PgNo 256) (STATE SSR) Item Spec: (As directed by Engineer in charge.) |
| 10 | ITEM NO.: 10 Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete..... (INo39-58, PgNo 257) (STATE SSR) Item Spec: (As directed by engineer-in-charge.) |
| 11 | ITEM NO.: 11 Providing and fixing in position after hoisting, precast 1:2 cement mortar reinforced jali 50 mm thick with 3 mm diameter mild steel bar reinforcement, of approved design on both side, fixing in cement mortar 1:3 and curing complete..... (INo26-46, PgNo 194) (STATE SSR) Item Spec: (Bd. F. 20 Page No. 307) |
| 12 | ITEM NO.: 12 Providing structural steel work in hollow section of various thickness and sizes in square, rectanular and round shape from 25mm to 450mm section as per IS 4923 YST 310 Grade produced from iron ore and blast furnace route etc. as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/welded connections and painting complete..... (INo23-12, PgNo 174) ( STATE SSR) Item Spec: (Spec. No. As directed byEngineer in Charge.) RA NO.: 6 |
| 13 | ITEM NO.: 13 Providing and fixing corrugated galvanised iron sheets of 0.03mm thick (24 BW.G) for roofing without wind tiles Including fastening with galvanised tron screws & bolts, lead & bitumen washers as per drawing etc complete. (Weight of 5.5 kplsgm) (No38-04, PgNo 233) (STATE SSR) Item Spec (BaR8, Page No. 453) |
| 14 | ITEM NO. 14 Providing and fixing colour coated Zincalume (R) AZ150 (min 150 gms/sq mt. Total on each side) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness (BMT) (0.5 mm TCT), Hi-strength steel with min 550 Mpa yield strength, metallic hot hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.0% silicon) with COLORBOND (R) steel quality super durable polyester paint coat ( with Inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center-to-center. The end rib shall be designed for anti-capillary groove. & return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. Fastened with min. 25 um Zino-Tin alloy coated, Hex head, self-drilling screw etc. Complete. (weight of profile 4.52 kg/sqm).... (INo38-34, PgNo 236) ( STATE SSR) Item Spec: (As directed by Engineer in charge.) |
| 15 | ITEM NO.: 15 Providing and fixing 6.00 mm thick ISI mark Asbestos Cement Corrugated sheet roofing including galvanised iron 'J' or 'L' hook bolts galvanised iron band bituminous G.I. washers, galvanised iron clamps, boits, nuts and scaffolding etc. complete..... (INo38-06, PgNo 233) (STATE SSR) Item Spec: (Bd. R.7, Page No. 453) |
| 16 | ITEM NO.: 16 Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside. face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc., complete..... (INo42-30, PgNo 277) (STATE SSR) Item Spec: (As directed by Engineer in charge.) |
| 17 | ITEM NO.: 17 Providing and fixing partition with kadappa stone of all sizes and 25 mm thick polished on both side and edges to original including fixing in position in cement mortor 1:4 curing polish-ing, cleaning etc complete..... (INo42-29, PgNo 277) (STATE SSR) Item Spec: (As directed by Engineer in charge.) |
| 18 | ITEM NO.: 18 Providing and fixing 10 cm PVC nahani trap with grating etc. complete..... (INo42-67, PgNo 281) (STATE SSR) Item Spec: (BD.V 32 A page 551 and as directed by Engineer in charge) |
| 19 | ITEM NO.: 19 Providing and laying ceramic tiles having size 30 cm x30 cm confirming 1.5.15622/2000 (gr thick for flooring in required position laid on a bed of 1:4 cement 22/2006 (group D 1 A) and 7 to 8 min mortar including cement float, filling joint with white/colour cement slurry cleaning STATE SSR) ning curing etc. Complete (INo33-24, PgNo 215) ( SSR) Item Spec: (Bd M. 12 Page No. 385) |
| 20 | ITEM NO.: 20 Providing and laying ceramic tiles having size 30 cm. X 30 cm. For dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. Complete (INo33-25, PgNo 215) (STATE SSR) Item Spec: (Bd.M.13 Page No. 386.) RA NO.: 8 |
| 21 | ITEM NO.: 21 Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. Complete. A) Flooring.... (INo33-42, PgNo 217) ( STATE SSR) Item Spec: (Bd.M.12 Page No. 385) |
| 22 | ITEM NO.: 22 Providing and laying vitrified mirror/glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. Complete.b) Skirting (INo33-41, PgNo 217) (STATE SSR) Item Spec: (Bd.M. 10 |
| 23 | ITEM NO.: 23 Providing flush grooved pointing with cement mortar 1:3 for stone masonry work including scaffolding and curing etc. complete. (No32-17, PgNo 210) (STATE SSR) Item Spec: (Bd. L.15 Page No. 372) RA NO.: 11 |
| 24 | ITEM NO.: 24 Providing internal cement plaster 6 mm thick in a (Bd.L.1 Page No. 367) complete (INo32-01, PgNo 209) (STATE SSR) Item Spec: single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. RA NO.: 12 |
| 25 | . ITEM NO.: 25 Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc |
| 26 | ITEM NO 26 Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all por sal of 12 to 15 mm thick in C.M. 1.4 and roll positions rough cast with base coal of 12 to 16 mm If treatment 12mm thick in proportion 1:1 1/2.3 including scaffolding and fourteen days cuing complete (No32-12, PgNo 209) ( STATE SSR) tem Spec: (Dd LB Page No. 370) RA NO.13 |
| 27 | ITEM NO.: 27 Providing, laying and fixing P.V.C. pipe of 110 mm. dia with with fittings fitings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete (No42-28, PgNo 277) (STATE SSR) Item Spec: (As directed by Engineer in charge.) |
| 28 | ITEM NO.: 28 Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. (INo35-13, PgNo 224) (STATE SSR) Item Spec: (Bd.0.8 Page No. 406) |
| 29 | ITEM NO.: 29 Providing and fixing H.D.P container Syntex or alike 300.000 ation hoisting one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters.... (INo42-53, PgNo 280) (STATE SSR) Item Spec: (As directed by engineer-in-charge.) |
| 30 | ITEM NO.: 30 Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats.....(INo42-19, PgNo 275) (STATE SSR) Item Spec: (Bd.V.46, Page No. 576) |
| 31 | ITEM NO.: 31 Providing and fixing 15 mm dia. screw down bib/stop 4.000 tap of brass including necessary socket union nut complete.....(INo41-40, PgNo 270) (STATE SSR) Item Spec: (Bd.V.8 Page No. 554) |
| 32 | ITEM NO.: 32 Providing and fixing on walls/ ceiling/floor 15 mm día. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete..... (INo42-55, PgNo 280) ( STATE SSR) Item Spec: (BD.V5 page 551 and as directed by Engineer in charge) |
| 33 | ITEM NO 33 White glazed wash basin 45X3 801) (STATE SSR) Item Spec: (wash basin) hbasin 45X30cm. (No2, PgNo 1.000 |
| 34 | ITEM NO.: 34 Providing and fixing board displaying information, such as Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border/messages/symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge.... (INo6-36, PgNo 60) ( STATE SSR) Item Spec: (MORTH 801) |
| 35 | ITEM NO.: 35 Royalty Charges for HARD MURUM. Rate Royalty + surcharge (2%) (211.95 +4.23=216.18 Per Cum) (INo1-A, PgNo 1) (STATE SSR) Item Spec: (As Directed By Engineer Incharge) |
| 36 | ITEM NO.: 36 Royalty Charges for RUBBLE. Rate = Royalty + surcharge (2%) (211.95+4.23 216.18 Per Cum)... (INo1-J, PgNo 1) (STATE SSR) Item Spec: (As Directed By Engineer Incharge) |
| 37 | ITEM NO.: 37 MORTOR Compressive Strength. (Set of 3 Cubes)....(INo27-VQC, PgNo 585) (STATE SSR) Item Spec: (As per Standard Specification) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 27, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 31, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
TodayAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodaySep 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender