Tender For Supply Of Hand Pump Set , Hand Pump Spare Part And Tool Kit As Per Techincal Specification Give In Tenders
Tender Value
10 Lakhs
Estimated cost
Bid Submission
04 Sep 2026
11 days left
EMD
20000
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalna → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply Of Hand Pump Set , Hand Pump Spare Part And Tool Kit As Per Techincal Specification Give In Tenders
BOQ
| Sl. No. | Item Description |
| 1 | Manufacture, supply & delivery of BIS Marked fully hot dip galvanized Deepwell Handpump (India mark-II) assembly complet HP Set ( IS 15500 part-2 ) unit with 12 No. Connecting rods (Bright bars) of 12 mm dia. 3Mts. Length each with 12 No. of riser pipe of 32 mm dia 3 Mts in length each both end threaded and one end coupling with seamless socket each confirming to IS:1239 with its Amendments / revision up to date including packing, loading, forwarding and transportation charges up to consignees store. The component identification and manufacturers identification mark shall be as pre BIS specifications with Telescopic Stand Assembly in lieu of normal stand for 150 mm dia Borewell. |
| 2 | Chain with coupling for Deep well Hand pump (is: 15500 part 4) |
| 3 | Handle for Deepwell Hand pump (is: 15500 part 4) |
| 4 | Head for Deepwell Hand pump (is: 15500 part 4) |
| 5 | Cylinder body with brass liner for Deepwell Hand pump (is: 15500 part 5) |
| 6 | Water tank for Deepwell Hand pump (is:15500 part 4) |
| 7 | Pump Bucket (NITRILE) washer for Deepwell Hand pump |
| 8 | Sealing ring for deepwell handpumps |
| 9 | Cylinder Assembly (Complete unit inclusive of stainless steel plunger rod 12mm dia with NITRILE rubber pump bucket) Suitable for Deepwell Hand pump (IM-ll) (is: 15500 part 4) |
| 10 | Single side shielded Bearing confiming to IS: 15500 part 4 suitable for above handpumps SKF 6204 |
| 11 | Lower valve assembly comprising with rubber seal retainer rubber seating check valve and check valve seat suitable for Deepwell Hand pump(IM-ll) (is:15500 part 6) |
| 12 | Lower valve guied with rubber sheet |
| 13 | Upper valve with rubber sheet for Deepwell Hand pump (is:15500 part 6) |
| 14 | Handle axle with washer and Nut for Deepwell Hand pump (is:15500 part 4) |
| 15 | Stand assly Telescopic for Deepwell Hand pump (is: 15500 part 4) |
| 16 | Upper valve assly Suitable for Deep well Hand pump (IM-ll) (is: 15500 part 6) |
| 17 | Chain Nut with Bolt M-12X40 (is: 15500 part 4) |
| 18 | Reducer cap for Deepwell Hand pump (is:15500 part 5) |
| 19 | Hydraulically operated vice for 32mm N.B.pipe(IM-ll) |
| 20 | Die Set 12mm with Handle and Bits |
| 21 | Third plate suitable for deepwell handpump (is:15500 part 4)(I.M.II) |
| 22 | Pipe lifter Spanner for 32mm N.B.Pipe. |
| 23 | Connecting Rod Combination vice |
| 24 | Hex nut and bolt M 12 x 40 |
| 25 | Pipe wrench 600 mm 24 inc |
| 26 | Double ended open jaw spanner 17 x 18 in c.v. steel |
| 27 | Pipe wrench 300 mm 12 inc |
| 28 | 12 inc Adjectable spanne |
| 29 | Hacksaw frame |
| 30 | 12 mm Rod cupling |
| 31 | 32 mm Pipe cupling |
| 32 | Hacksaw blade (made of high speed steel) |
| 33 | Head cover |
| 34 | Ring spanner 17x18 |
| 35 | Double ended open jaw spanner 18x19 |
| 36 | 32 mm GI pipe |
| 37 | 12 mm connt rod |
| 38 | 12 mm conn rod T |
| 39 | Thereding V Clamp vice |
| 40 | Tool Kit with 32 mm GI pipe vice(1nos)+12 mm Rod Vice(1nos)+24inc Pipe wrench (2nos)+12inc Pipe wrench (1nos) +pipe lifter (3nos)+ 12 inc Adjectable spanne (1nos) + Die Set 12mm (1nos) + Die Set 32mm (1nos) + Hacksaw Frame (1nos) + Hacksaw Blade (1nos) + Double ended open jaw spanner 18x19 (2nos) + Ring spanner 18x19 (2nos) + Ring spanner 17x19 (2nos)+ Chain Fitting Box Spaner (2nos)+ Tool kit Case Box (1nos) + Thereding V Clamp (1nos) + 12 mm road T (1nos) + 32 mm x 1/2 mts Barrel pice with cupling (1nos) Complet Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender