Tender For Renovation Of Banganga Barrage C Us And Construction Of A Boundary Wall. Lot No.-02
Tender Value
Ref. Documents
Estimated cost
Bid Submission
27 Aug 2026
3 days left
EMD
12.42 Lakhs
Bank guarantee accepted
Document Fee
6354
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Siddharth Nagar → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Banganga Barrage C Us And Construction Of A Boundary Wall. Lot No.-02
BOQ
| Sl. No. | Item Description |
| 1 | E/W in excavation for foundation with disposal; lead upto 30 m & lift upto 1.5 m for proper completion of the work. |
| 2 | Cutting, bending, binding & placing of steel [Brand Name: -Tata Steel (Tata Tiscon), JSW Steel (JSW Neosteel), SAIL, and Jindal Steel & Power (Jindal Panther)] reinforcement including cost of binding wire and cost of steel, labour,T&P etc. required for proper completion of the work. |
| 3 | Laying C.C. in M-10 Grade (1:3:6) with 20 to 40 mm size crushed Stone grit & coarse sand having F.M. not less than 2.0 including cost of all material, labour and T&P etc. required for proper completion of the work. |
| 4 | Centering & shuttering for R.C.C. work including cost of all material, labour, T & P etc. for proper completion of the work. |
| 5 | Laying R.C.C. in M-25 Grade (1:1:2) with 10 to 20 mm size crushed Stone grit & coarse sand having F.M. not less than 2.0 including cost of all material, labour and T&P etc. required for proper completion of the work. |
| 6 | Laying R.C.C. in M-20 Grade (1:1.5:3) with 10 to 20 mm size crushed Stone grit & coarse sand having F.M. not less than 2.0 including cost of all material, labour and T&P etc. required for proper completion of the work. |
| 7 | 1st class brick work with 1st class brick & coarse sand having FM not less than 2.0, including cost of all material, labour and T&P etc. required for proper completion of the work. |
| 8 | Laying F.R.C.C. in M-15 Grade (1:2:4) with 10 to 20 mm size crushed Stone grit & coarse sand having F.M. not less than 2.0 including cost of all material, labour and T&P etc. required for proper completion of the work. |
| 9 | Providing & applying 12 mm thick plaster in 1:4 Cement Mortar including cost of all material, labour, T & P etc. for proper completion of the work. |
| 10 | Providing and applying white cement based putty (Brand Name:-Birla White) of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 11 | White washing with lime on decorated wall surface one coat to give an even shade including thoroughly brooming the surface to remove all dirt, mortar drops and loose scales of lime wash and other foreign matter for proper completion of the work. |
| 12 | Distempering with dry distemper of approved brand (Brand Name-Birla Opus) (two coats) over one priming coat of whiting on NEW surface free from dropping and other foreign matter including preparing the surface even and sand papered smooth including cost of all materials, labour, T&P. |
| 13 | Supplying of Rubber moulded reftective Zig-Zag 80 mm. thick tiles of precast compressed C.C. passing minimum 30 mega pascle compressive strength I.S.I. marked including cost of material, labour and all T&P required for proper completion of the work |
| 14 | Dismantling brick work in cement mortar including stacking of materials as directed by engineer —in —charge with in a distance of 60 m. for proper completion of the work. |
| 15 | Providing and fixing stainless steel (Grade 304) (Brand Name: -Jindal Stainless, Steel Authority of India Ltd (SAIL), and JSW Steel) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 16 | Supply & fixing and concealing of 25 mm dia 2 mm thick PVC conduit pipe (Brand Name-Supreme Industries) with ISI mark embossed and with PVC accessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin / adhesive to make the complete piping rigid, plastering with cement sand mortar finished to the level with matching colour wash including cost of all material labour and T&P etc required for proper completion of the work as per directions and to the satisfaction of Engineer in charge. |
| 17 | Supply & fixing of decorative 40 to 45 Watt LED Post top indirect light luminaire (Brand Name:-Crompton, Havells & Bajaj Electricals) CAT-AAA having Pressure die cast aluminium body and Clear glass with driver set confirming to IP 65 and above protection complete in all respect. |
| 18 | Supply & fixing steel tubular pole 7 Metre long (Brand Name:-Bajaj Electricals) designated 410 SP-3 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect. |
| 19 | Supply & fixing of 10 SWG copper wire (Brand Name-Polycab India Ltd) along with conduit pipe duly bound with earthclops as directed at site by Engineer in charge with supply of all the material labour and T&P etc required for proper completion of work. |
| 20 | Laying C.C. in M-7.5 Grade (1:4:8) with 10 to 20 mm size crushed Stone grit & coarse sand having F.M. not less than 2.0 including cost of all material, labour and T&P etc. required for proper completion of the work. |
| 21 | S/Laying of local sand for making subgrade including cost of all material, labour and T&P etc. required for proper completion of the work. |
| 22 | Providing & Laying of Mzp stone boulder (20 to 40 kg minimum dimension 200mm) in Mechenically woven Double Twisted Hexagonal shaped Gabion boxes crate BIS standard class 2 as per IS 16014:2024 of required sizes 3.0×2.0x0.30m for Gabion box/Launching apron with diaphragms, mesh size 10.00×12.00cm dia 2.7/3.7mm (ID/OD) having zinc and polymer coated edged with mechanically selvedge dia 3.4/4.4mm (ID/OD) minimum 2.5 warps with partitions at every 1m interval and shall have minimum 10 no of opening per meter of mesh perpendicular to twist tying with Lacing wire of dia 2.2/3.2 mm (ID/OD) of construction of launching apron and Gabion wall including all material, labour, T&P, carriage, loading, unloading, Royality, all taxes but excluding GST etc. and tying with lacing wire all complete as per directions of engineer-in-charge. |
| 23 | Providing & Laying of Mzp stone boulder (20 to 40 kg minimum dimension 200mm) in Mechenically woven Double Twisted Hexagonal shaped Gabion boxes crate BIS standard class 2 as per IS 16014:2024 of required sizes 3.0×1.0x0.30m for Gabion box/Launching apron with diaphragms, mesh size 10.00×12.00cm dia 2.7/3.7mm (ID/OD) having zinc and polymer coated edged with mechanically selvedge dia 3.4/4.4mm (ID/OD) minimum 2.5 warps with partitions at every 1m interval and shall have minimum 10 no of opening per meter of mesh perpendicular to twist tying with Lacing wire of dia 2.2/3.2 mm (ID/OD) of construction of launching apron and Gabion wall including all material, labour, T&P, carriage, loading, unloading, Royality, all taxes but excluding GST etc. and tying with lacing wire all complete as per directions of engineer-in-charge. |
| 24 | Supplying & Laying of Geotextile sheet over subgrade including cost of material, labour, T&P etc required for proper completion of the work. |
| 25 | Centering and shuttering for C.C. work including cost of all material, labour, T & P etc. for proper completion of the work. |
| 26 | Laying C.C. in M-15 Grade (1:2:4) with 10 to 20 mm size crushed Stone grit & coarse sand having F.M. not less than 2.0 including cost of all material, labour and T&P etc. required for proper completion of the work. |
| 27 | Dismantling reinforced cement concrete including stacking of dismantled material as directed by engineer—in-charge within a distance of 60M. |
| 28 | Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineerin-Charge. |
| 29 | Laying C.C. in M-20 Grade (1:1.5:3) with 4.75 to 10 mm size crushed Stone grit & coarse sand having F.M. not less than 2.0 including cost of all material, labour and T&P etc. required for proper completion of the work. |
| 30 | Dismantling of stone flagged or tiled floor including base concrete and including stacking of dismantled materials as directed by the Engineer-in-charge within a distance of 60M. |
| 31 | Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. |
| 32 | Providing and fixing false ceiling at all heights with integral densifie calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns as per CPWD pecification 2019, to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mmthick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24x38 mm of length 3000 mm,cross - T of size 24x32 mm of length 1200 mm and secondary ntermediate cross-T of size 24x32 mm of length 600mm to formgrid module of size 600 x 600 mm, suspended from ceiling usinggalvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick with precut hole on both 25mm flange to pierce into 12x50mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphey wall / partition with the help of plastic rawl plugs at 450mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directionsof the Engineer-in-charge. |
| 33 | Providing corrugated G.S. sheet (Brand Name:-Tata Shaktee & JSW Vishwas) roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender