Tender For Annual Maintenance Estimate Of The electrical installation Work At Mch Building Of Bsmc And H, Under B.M.C Electrical Section-I, Pwdte. Bankura.------ Repair Of Mch Lt Panel And Opd Building 2 Nos Lt Panel And Mch Building 2 Nos Panel Unde
Tender Overview
Project Description
Tender for Annual Maintenance Estimate Of The electrical installation Work At Mch Building Of Bsmc And H, Under B.M.C Electrical Section-I, Pwdte. Bankura.------ Repair Of Mch Lt Panel And Opd Building 2 Nos Lt Panel And Mch Building 2 Nos Panel Under Bsmc And H, Bankura.
BOQ
| Sl. No. | Item Description |
| 1 | Retro fitting of existing LT Panel of MCH Substation with charges of low rating Copper bar with necessary bending making hole fixing, overhauling old one & replacing the same with new nut, bolt, washer etc. as per rating of Main switches. |
| 2 | Supplying and fixing 415V, TPN SFU open execution in existing SS enclosure/cubical with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse. (replacing existing Main switch) 250A, Make-Siemens (for LT Panel within MCH Substation) |
| 3 | 415A, Make-Siemens (for 250 KVA DG incomer, LT Panel within MCH Substation - 1 no, OPD Building panel- 2 nos, Medicine Store Feeder Pillar-1 nos) |
| 4 | 630A, Make-Siemens (Model No - 3KL8421-5UA00)(for 500 KVA DG incomer, LT Panel within MCH Substation) |
| 5 | Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. 630A, Make- L&T (Cat. No. SK904920000) (for MCH building Panel) |
| 6 | Supplying of 1.1 KV Grade following sizes Al. Armoured PVC/ XLPE Cable ( Make : Havells/ Glostar/ KEI/PWD Approved ) as per direction of EIC 4 core 185 sqmm (LT panel room interconnection) |
| 7 | 4 core 300 sqmm (500 KVA DG to LT panel 630A SFU) |
| 8 | Laying of one cable above 150 sqmm and upto 300 sqmm through existing covered masonry trench incl. taking out RC covers, setting them in order, mending good the damages filling the trench with fine dry sand incl. supplying sand. |
| 9 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : 4 core 50 sqmm |
| 10 | 4 core 70 sqmm |
| 11 | 4 core 95 sqmm |
| 12 | 4 core 120 sqmm |
| 13 | 4 core 150 sqmm |
| 14 | 4 core 185 sqmm |
| 15 | 4 core 240 sqmm |
| 16 | 4 core 300 sqmm |
| 17 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials . 4 core 50 sqmm |
| 18 | 4 core 70 sqmm |
| 19 | 4 core 95 sqmm |
| 20 | 4 core 120 sqmm |
| 21 | 4 core 150 sqmm |
| 22 | 4 core 185 sqmm |
| 23 | 4 core 240 sqmm |
| 24 | 4 core 300 sqmm Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe as to GS. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender