Tender For Supply And Installation Of Decorative Poles From Jawahar Nagar Main Road Anil Kothari Clinic To Mbs Road In Municipal Corporation Kota.
Tender Value
6.08 Crore
Estimated cost
Bid Submission
07 Sep 2026
15 days left
EMD
12.16 Lakhs
Bank guarantee accepted
Document Fee
7500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kota → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply And Installation Of Decorative Poles From Jawahar Nagar Main Road Anil Kothari Clinic To Mbs Road In Municipal Corporation Kota.
BOQ
| Sl. No. | Item Description |
| 1 | WORK NAME |
| 2 | Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Un-Arrmoured Aluminium cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6 %, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray (with cable tie) including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 4.0 Sq. mm 4 core |
| 3 | Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Arrmoured Aluminium cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6 %, round / flat strip armouring of cables, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR6.0 Sq. mm 4 core |
| 4 | 10.0 Sq. mm 4 core |
| 5 | 25.0 Sq. mm 3.5 core |
| 6 | 50.0 Sq. mm 3.5 core |
| 7 | 70.0 Sq. mm 3.5 core |
| 8 | Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Un-armoured Copper cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with electrolytic grade Copper made of copper rods confirming to IS 613-1964, of purity >99.7 %, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray (with cable tie) including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810 For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 2.5 Sq. mm 3.0 core |
| 9 | Supply & Laying following size' B ' class , G.I. Pipe confirming to IS : 1239 P - 1 ( 2004 ) with accessories like bend, socket etc. for laying earth conductor/ strip / cable in ground/ surface/ recess as required. All as per pre approved by Engineer in-charge. (Earth Excavation will be Paid Extra)All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annex ure \\"A\\" attached with this BSR .32mm dia |
| 10 | 50mm dia |
| 11 | 80 mm dia. |
| 12 | P/L of Double wall corrugated HDPE pipe confirming to IS:14930 P-I&2 with HDPE coupler at 1mtr Depth below the ground for laying cable and back filling the trench, conpaction of earth as required of Gemini or IS:14930 marked make outerDia/Inner dia.95/ 110 mm |
| 13 | 63 mm |
| 14 | 50/55 mm |
| 15 | Providing and laying in position cement concrete including curing compaction etc. complete in specified grade excluding the cost of centering and shuttering-All work upto plinth level. 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size). |
| 16 | Earth work in excavation /by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth , 1.5 mtr in width as well as 10 sum on plan ) including disposal of excavated earth , lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed |
| 17 | Add Extra in Item no.60.5 if Excavation done in Hard Rock / CC road / TAR Road and making Good the same |
| 18 | Providing and Laying RCC Foundation for Octagonal / ConicalStreet Light poles, High mast Poles as per Drawing attach at TableP-4 with Following Procedure & All as per pre approved byEngineer in-charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR .A) Excavation of Pit for Foundation Size upto required depth fromGround levelB) Dressing of Pit and Dry stone pitching 200 mm thick includingsupply of stones and preparing surface complete.C) Providing and laying in position cement concrete of M-10 grade of 75 mm thicknessD) Reinforcement for R.C.C. work with TMT bars includingstraightening, cutting, bending, placing in position and binding allcomplete.E) Centring and shuttering including strutting , propping etc. andremoval of form work for Footing and PedestalF) Providing & Fixing of 2 no. Required Size PLB HDPE Pipe &Foundation Bolt with template as per OEM Recommendations.G) Providing and Laying Reinforce cement Concrete of M-25 gradein Footing and Pedestal including Curing the foundation for 7 days.H) Providing and Fixing Nosing Angle 40 mm x 40 mm x 6mm with 2no. 100 mm long, 10 mm dia. Lugs on each face. Pole Foundation for Octagonal pole from 7 Mtr. To 9 Mtr. |
| 19 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR. 2 x 1.5 sq.mm |
| 20 | 150 mm DN/ID HDPE DWC (External Annular Corrugated and smooth internal walls) SN-8 as per IS 16098 part 2 |
| 21 | P & F in position frame made out of M.S. angle (riveted or welded) finished with two coats of red oxide and two coats enamel paint including cutting, welding, holes etc.of following sizes as required.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 40mm x 40mm x 5mm |
| 22 | P & Fixing Powder coated CRCA sheet enclosures on existing angle iron frame by means of nuts and bolts and making holes , Din rail etc. as required.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 1.6 mm thick |
| 23 | 2.0 mm thick |
| 24 | Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above rating including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR Single pole MCB (With B/C curve tripping Characteristics) 6 A to 32 A rating |
| 25 | Providing & Fixing of 240/415 V isolator ISI marked IS:13947-III/conforming to IEC 60947-3, suitable for AC22A utilization category, 4KV impulse withstand voltage, true contact indication, Red colour dolly / lever shall have single mould covering overall poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. IP 20 contact protection and fitted in existing distribution board / sheet including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in-charge.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR Four pole Isolator 80 A/ 100 A rating |
| 26 | Supply & fabrication steel structure with MS channel / angle / joist / ISMB / sheet etc. including welding, rivetting, cutting, nut & bolt , one coat of primer & two coat of enamel paint etc. as required complete in all respect. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . |
| 27 | Supplying and making end terminations with heavy copper lugs(Pin / ring type) duly crimped with crimping tool, PVC tape etc of following size 2 x 4.0 sq.mm |
| 28 | 3 x 2.5 sq.mm |
| 29 | Supplying and making end termination with heavy duty Copper lugs ( ANY type ) confirming to IS 8337 -1976 duly crimped with crimping tool, PVC tape etc of following size.All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR .16.0 Sq.mm |
| 30 | Supplying and making end termination with heavy aluminium lugs ( Pin / ring type ) confirming to IS 8309 -1993 & IS 8337-1976 duly crimped with crimping tool, PVC tape etc of following size.All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR .6.0 Sq.mm |
| 31 | 10.0 Sq.mm |
| 32 | 25.0 Sq.mm |
| 33 | 50.0 Sq.mm |
| 34 | 70.0 Sq.mm |
| 35 | Supply and fixing of aluminium/copper bus bar by means of SMC/DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending cutting in required shape and size and colour coding with heat shrinkable PVC sleeves. Electrolytic grade aluminium bus bar. Electrolytic grade aluminium bus bar. |
| 36 | Electrolytic grade copper bus bar. |
| 37 | Plate Earthling as per IS: 3043 with G.I Earth plate of size 600 mm x 600 mm x 6.0 mm by embodying 3 to 4 mtr. below the ground level with 25 mm dia G.I. “B” Class watering Pipe including all accessories like nut bolt reducer nipple wire meshed funnel and C.C. finished chamber covered with hinged type with locking arrangement C.I Cover C.I Frame of size 300 mm x 300 mm complete with alternate layers of salt and coke/ charcoal testing of earth resistance as required. |
| 38 | Supply and installation of spike of M.S. rod 20mm dia 3.0mtr long for earthing of (tower/pole) drive into earth by mechnical means sturture connection the spike with cross arm top hamper PCC Pole, lattice tower to earth etc, complete technical specification of discom. |
| 39 | S&F laying following size earth wire/ in horizontal or Vertical run in ground/ surface/ recess including riveting, soldering, saddles, making connection etc. as required. 8 SWG G.I.( Hot Dippped) Wire. |
| 40 | GI strip 25mmx3mm( Hot Dipped)size. |
| 41 | Providing and fixing of IP 65 protectd Polycarbonate / Polysterene fuse box moulded with inside knock outs of following size with hinged cover, transparent window, PU gasket, locking arrangement, duly holded with 2 nos. pole clamps of 20 mm x 3 mm flat with nut and bolts, complete with The box shall be provided with Din rail, 4 / 8 way 10.0 / 16.0 sq.mm heavy duty connector, earth terminal, complete in all respect. 125 mm X 200 mm X 122 mm |
| 42 | SITC of quick make and quick break 3 pole current limiting MCCB having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings and conforming to IS 60947-2 / IEC 60947-2 with front face and centralised adjustable, line load interchangeability, having positive isolation capability, provision for UVR , shunt trip , earth fault trip, push ( test ) to trip, includin g making connections with lugs & spreaders, etc. as required. 160 Amp , 25 kA, adjustable O/L & fixed S/C setting, Ics = 100 % Icu |
| 43 | up to 250 Amp , 35 kA, adjustable O/L & fixed S/C setting, Ics = 100 % Icu |
| 44 | up to 100 Amp , 25 kA, adjustable O/L & fixed S/C setting, Ics = 100 % Icu |
| 45 | SF of 110/220 V, LED (22.5 mm dia ) Indicating lamp with integral circuit, terminal block, including connection etc. as required.Red/yellow/Green colour Group1 |
| 46 | Blue colour |
| 47 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor Three level Hot rolled deformed bars (IS : 1139).. |
| 48 | Centering and Shuttering with plywood or steel plate including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. |
| 49 | Labour charges for Dismantling of following existing street light electric poles with street light fixtures, underground cable, MS box and other electric items of the pole coming along the alignment of the road and removal and re- rolling MS poles/PCC poles of different sizes as well as handing over the same to DISCOM/UIT/MC store and as per the direction of Engineer Incharge and clean the site good as per the requirement and submit the receipt from concering authority, all complete works |
| 50 | Labour charges for Dismantling of existing electric poles (PCC poles, MS channel, Lattic tower 12.6mtr. , 11 mtr. along with the ACSR Conductors, 11KV/33KV/LT line etc. 11KV insulator LT insulator guard wires, staywires and other electric items of the pole coming along the alignment of the road and removal and re- rolling PCC pole, MS channel different sizes as well as handing over the same to DISCOM store including transportation from site to store and stacking of dismantling material in store and as per the direction of Engineer Incharge and clean the site good as per the requirement and submit the receipt from DISCOM/ concering authority, including all complete works. |
| 51 | P & F solid state blinker caution unit weather proof box and poleclips with flashing rate 40-60 flashes per minute. |
| 52 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR. 2 x 1.5 sq.mm |
| 53 | 1 x 16.0 sq.mm |
| 54 | Providing & Fixing of ISO certified company made bakelite fuse fitting for HBC fuse links (front/bus bar connections) Conforms To IS 13703/IEC 269 w/o HBC fuses as per PWD specification for electrical Works on existing board including making connections with lugs, testing etc. as required. Appropriate type test certificate / OEM test report shall be submitted . All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR 100/125 A rating |
| 55 | Providing & Fixing of ISO certified company made bolted type/ Din type HBC (High breaking capacity) fuse links of 80 KA breaking capacity,as per PWD specification for electrical Works conforming to IS:13703 in the existing fuse base, fuse switch unit etc. of the following type and rating. Appropriate type test certificate / OEM test report shall be submitted . All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . Din (knife type) type 63 A to 160 A Size 00 |
| 56 | Providing & Fixing of AC operated heavy duty 230 /440 Volt power contactor as per PWD specification for electrical Works, ISI marked IS/IEC 60947-4-1 : 2000 having provision of mechanical interlocking, auxilary contacts, Din rail mounting type including making connections, testing etc. as required. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . 95 Amp |
| 57 | Providing & Fixing of mechanical / digital time switch having following day / week programme and minimum 100 hours reserve and AC1 rating of 16-20 amperes including making connection, programming conforming to IEC 60730-1 and 60730-2-7 etc. as required. All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR .One day reserve (Analog type ) |
| 58 | SITC of modern heritage post top luminaire(all designs to be approved by department) with 2 modules of 50W LED each, polycarbonate diffuser clear, Dimension A9 : Ø634 x 618 mm, A11 : Ø634 x 412 mm, A12 : Ø634 x 610 mm upgraded with high performance light engines. Aesthetically designed sturdy construction ensures a long life against all weather conditions,maintaining initial performances through the lifetime of the installation. IK Rating – IK07 CRI rating - >70, Safety class I, in built surge protection of 6KVA, Protection class : IP65. Designed for highest efficiency in terms of more lumens at reduced wattages WW (2x6127lm), CW ( 2x6223lm), NW(2x5899lm) type II LED lens. Product offered asymmetrical light distribution. The luminaire comprises of die cast aluminium top cover with Non yellowing, UV stabilised clear polycarbonate V diffuser and decorative supporting arms as per architectural design requirement Finished with pure polyester powder coated black finish complete in all respect .Test report / certificates of manufacturer which are to be needed is to be submitted by contractor.( Make – Twinkle lite/ K lite/ Orient elc./ Bajaj elc./ Phyrotech/ Philips and other equivalent make matching with above specification and make is to be approved by department .Enclosed drawing of luminarie only for just reference.) modern heritage post top luminaire2X50W LED |
| 59 | SITC of decorative ornamental pole made of galvanised Iron pipe with single arm bracket and provision for mounting post top LED at top of the pole as per drawing fixture featuring a tiered structural design: a 165.00 mm base upto 1-meter, 3-meter 114.3mm a 3-meter 88.90 mm central pipe, and a 1-meter ornamental top assembly. Built from IS 1161/1239 grade steel and E250 grade base plates, the pole is reinforced with aluminum castings and cast iron at bottom base for its decorative scrollwork and transition points, all protected by a robust epoxy zinc phosphate primer and polyurethane paint finish. Functionally, it is anchored by a 300x300mm square base plate and includes an integrated service door for access to a control gear tray with an MCB, offering a blend of heritage-inspired aesthetics and modern electrical safety for street or parkland environments. H1-165x3x1000mm H2:-114.3x3x3000mm H3:-88.9x3x3000mm H4:-76.1x3x1000mm (bracket in single arm) Base Plate-300x300x16mm PCD-300mm All decorative emblishment & Pole color shade shall be as per department choice.Make: Twinkle Lite/K-Lite/Pyrotech/Orient/Bajaj/Philips/Polux/ Trading Engineers and other equivalent make matching with above specipication and make is to be approved by department Incharge quality test report from NABL approved labs/in house NABL approved labs including TPI reports will be submitted by contractor. |
| 60 | SITC of decorative ornamental pole made of galvanised iron pipe with Double arm bracket and provision for mounting post top LED at top of the pole as per drawing pole fixture featuring a tiered structural design: a 165.00 mm base upto 1-meter, 3-meter 114.3mm a 3-meter 88.90 mm central pipe, and a 2-meter ornamental top assembly. Built from IS 1161/1239 grade steel and E250 grade base plates, the pole is reinforced with aluminum castings and cast iron at bottom base for its decorative scrollwork and transition points, all protected by a robust epoxy zinc phosphate primer and polyurethane paint finish.Functionally, it is anchored by a 300x300mm square base plate and includes an integrated service door for access to a control gear tray with an MCB, offering a blend of heritage-inspired aesthetics and modern electrical safety for street or parkland environments. H1-155x3x1000mm H2:-114.3x3x3000mm H3:-88.9x3x3000mm H4:-76.1x3x2000mm (bracket in double arm) Base Plate-300x300x16mm PCD-300mm All decorative emblishment & Pole color shade shall be as per department choice.Make: Twinkle Lite/K-Lite/Pyrotech/Orient/Bajaj/Philips/Polux/ Trading Engineers and other equivalent make matching with above specipication and makes to be approved by department Incharge quality test report from NABL approved labs/in house NABL approved labs including TPI reports will be submitted by contractor. |
| 61 | SITC of decorative ornamental pole made of galvanised iron pipe with Four arm bracket and provision for mounting post top LED at top of the pole as per drawing pole fixture featuring a tiered structural design: a 165.00 mm base upto 1-meter, 3-meter 114.3mm a 3-meter 88.90 mm central pipe, and a 2-meter ornamental top assembly. Built from IS 1161/1239 grade steel and E250 grade base plates, the pole is reinforced with aluminum castings and cast iron at bottom base for its decorative scrollwork and transition points, all protected by a robust epoxy zinc phosphate primer and polyurethane paint finish. Functionally, it is anchored by a 300x300mm square base plate and includes an integrated service door for access to a control gear tray with an MCB, offering a blend of heritage-inspired aesthetics and modern electrical safety for street or parkland environments. H1-165x3x1000mm H2:-114.3x3x3000mm H3:-88.9x3x3000mm H4:-76.1x3x2000mm (bracket in four arm) Base Plate-300x300x16mm PCD-300mm All decorative emblishment & Pole colour shade shall be as per department choice.Make: Twinkle Lite/K-Lite/Pyrotech/Orient/Bajaj/Philips/Polux/ Trading Engineers and other equivalent make matching with above specipication and make is to be approved by department Incharge quality test report from NABL approved labs/in house NABL approved labs including TPI reports will be submitted by contractor. |
| 62 | SITC of three phase centralized control & monitoring system - CCMS (3-Ø) with communication system at each switch point through wed enabled software, generation of necessary alerts at the time of faults/abnormal conditions in the batch on prorata basis. System shall be remotely monitored on mobile/desktop including charges of SIM with recurring charges and operation & maintenance of system for two years. System shall compatible for remote on/off of lights, schedule of timing of lights. Capture the energy usage and other perameters at pre-determined interval and store data for 30 days. Ability to download data in field. Ability to connect with a communication device. System protection against surges. Ability to upgrade tirmwase on field using a communication device. Enclosure fire retardant enclosures FRS/SMC material and with impact resistance of IK10 & IP 65 with standard lock. Communicate securaly with cellular networks or RF. Two-way communicate, Ability to send data regarding energy usage. ON/OFF status etc. Ability to give commands from a central level for switching ON/OFF scheduling etc. web based/mobile based software package with detailed information dashboard. Ability to show the status of each controller on the dashboard, Inter-operblitiy of all support services releted to CCMS, Reports in form of matrix as well as graphical representation, Incorporate logics to determine fault detection at switching point level and power thefts and execute a user defined standard operating procedure to aid in issue remediation. Server uptime should be minimum 99.99% with disaster backup and sufficient storage capacity and processing power of ensure stable operation of CCMS. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 20, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender