Tender For Special Repair To Bldg No P-18 At Drugmulla In The Aor Of Age B/R-Iii Under Ge 874 Ews
Tender Value
62.50 Lakhs
Estimated cost
Bid Submission
16 Sep 2026
22 days left
EMD
1.18 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No P-18 At Drugmulla In The Aor Of Age B/R-Iii Under Ge 874 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Demoloition of cement concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 2 | M&L 75 mm thick PCC 1:3:6, type C-2 (using 20 mm graded crushed stone aggregate) as in plinth protection finished even aned fair without using extra cement complete all as specified and directed. |
| 3 | S&F for glass dividing strips, 3 mm thick, 38 mm wide complete all as Specified and directed. |
| 4 | Demolation of stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, walls aprons etc. complete all as specified and directed. |
| 5 | M&L for machine cut Kota stone slab flooring 20-25mm thick over and including 20mm thick cement screed 1: 6 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specifed and directed. |
| 6 | M&L for Kota stone slab 20-25mm thick as in riser of steps, skirting, dado and pillar laid over and including 10mm thick rendering in cement mortar 1:4 laid and joinedt with grey cement complete all as specified & directed. |
| 7 | M&L Non skid Ceramic tiles 7 to 8 mm thick area of each tiles exc 0.18 sqm but not exc 0.38 sqm, laid in floors etc., set and jointed in neat cement slurry and pointed in white cement to match the shade of tile laid over and including 15mm thick bedding layer in cement mortar 1:6 including necessary cutting and waste as per site requirement including dismantling floor ,hearth or wall tilling including cement mortar bedding removing serviceble tile to rubbish of the premises, complete all as specified and directed by Engineer-in-Charge. |
| 8 | M&L for non - skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including 15mm thick rendering in cement mortar 1:6 including dismantling floor ,hearth or wall tilling including cement mortar bedding removing serviceble tile to rubbish of the premises, complete all as specified & directed. |
| 9 | M&L for glazed ceramic coloured tiles (600mm x 300mm x7mm) thick, as in vertical surface such as in skriting and dado etc, set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over 10mm thick rendering in cement mortar 1:4 including Dismantling floor, hearth or wall tilling including cement mortar bedding removing serviceble tile to rubbish of the premises, complete all as specified & directed. |
| 10 | M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, with grey cement and pigment set, jointed and pointed in neat cement slurry in floors over 15 mm thick screed bed in cement mortar 1 :4, including dismantling floor ,hearth or wall tilling including cement mortar bedding removing serviceble tile to rubbish of the premises, complete all as specified and directed. |
| 11 | M&L for 50mm thick Granolithic cement concrete 1:1:2 as in floor topping treated with three dressing of sodium silicate finished fair surface complete all as specified and directed. |
| 12 | M&L second class soft wood in scantling clean swan complete all as specified, including dismantling timber scantling 40 Sq cm and over in section in any position in unframed work, complete all as specified and directed. |
| 13 | M&L plywood grade BWR type BB, 9 mm thick fixed with nails to timber frame work in ceiling, including dismantling wall and ceiling boards or insulation boards/slabs/blankets, any thickness including cover fillet, complete all as specified and directed. |
| 14 | M&L plain fillets 2nd class soft wood of exc. 3 Sqm but n exc. 6 Sqcm, square rectangular or triangular in section , clean swan, secured nails complete all as specified and directed. |
| 15 | M&L for preparation of newly un treated surfaces and applying two coats of synthetic enamel paint on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specifed and as directed. |
| 16 | Taking down chowkat with shutters exc.1.5 Sqm but n exc.4 Sqm (without taking off shutters from the frame) complete all as specified and directed. |
| 17 | Taking down chowkat with shutters n. exc.1.5Sqm (without taking off shutters from the frame) complete all as specified and directed. |
| 18 | Taking down shutters n exc.1.00 Sqm , complete all as specified and directed. |
| 19 | S&F 2nd class soft wood plain solid straight chowkats and frames wrought framed, rebated on the solid complete all as specified and directed. |
| 20 | S&F for factory made Plain, framed, panelled shutters second class soft wood 35 mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkats complete all as specified and directed. |
| 21 | S&F for factory made Glazed and skeleton shutters, second class soft wood 30 mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats,complete all as specified and directed. |
| 22 | M&L for preparation of old painted surfaces and applying one coat of synthetic enamel paint on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specifed and as directed. |
| 23 | S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed. |
| 24 | S&F solid PVC frame (single rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing, complete all as specified and directed.Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life. |
| 25 | S&F 100 mm size mild steel butt hinges medium weight complete all as specified and directed. |
| 26 | S&F 75 mm size mild steel butt hinges medium weight complete all as specified and directed. |
| 27 | S&F 150mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified and directed. |
| 28 | S&F 100 mm long aluminium anodised barrel tower bolt of exturded section,complete all as specified and directed. |
| 29 | S&F aluminium anodised alloy handles fabricated type 150mm size of handle, complete all as specified and directed. |
| 30 | S&F 100 mm long aluminium handles cast type anodised, complete all as specified and directed. |
| 31 | S&F 300mm long aluminium alloy, anodised sliding door bolt, with hasp and staple (bolt type) cast or extruded section and fixing bolts of extruded section, complete all as specified and directed. |
| 32 | S&F in repair for 03 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane including hacking out old broken glass (any thickness, size quality of description) from wooden frames or stone, concrete or brick sorrounds, glazad with putty or fixed with beeds complete all as specified and directed. |
| 33 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each pane complete all as specified and directed. |
| 34 | S&F in repair for stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 35 | S&F in repair for vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe, including of fixing supply pipe to flushing cistern, trap and waste pipe complete all as specified and directed. |
| 36 | S&F in repair for vitreous China wash basin, fancy bowl flat back size 550mm x 400mm including waste pipe and coupling 32mm for basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed including MS brackets & waste pipe complete all as specified and directed. |
| 37 | S&F in repair for vitreous china squatting pan 'Orissa' pattern size 580mmx440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing system anti syphonage pipe etc complete all as specified and as directed. |
| 38 | S&F in repairs Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect complete all as specified and directed. |
| 39 | S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long tube complete all as specified and directed. |
| 40 | S&F in repair for PVC valveless,syphonic action type, low level PVC flushing cistren 10 ltr capacity white with flush pipe & all fitting complete all as specified and directed. |
| 41 | S&F in repair for Bib taps cast copper alloy, chromium plated, with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule of 15mm bore, complete all as specified and directed. |
| 42 | S&F in repair for Pillar tap cast copper alloy, fancy type with capstan heads chromium plated screwed down with high pressure with or without lettered hot or cold with long screwed, shanks and fly nuts screwed for iron pipe 15mm dia complete all as specified and directed. |
| 43 | S&F in repair 20 mm Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 44 | S&F in repair ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia complete all as specified and directed. |
| 45 | S&F in repair 15mm bore Stop/Angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-Charge. |
| 46 | S&F in repairs two way angular stop cock chromium plated 15mm dia complete all as specified and as directed by Engr-in-Charge. Make : Cera/Jaquar/Essco or its equivalent. |
| 47 | S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws, complete all as specified and directed. |
| 48 | S&F in repair PVC connection 15mm dia and 600mm long with PTMT nuts and washer complete all as specified and directed. |
| 49 | S&F in repair PVC connection 15 mm length 450 mm fixed, complete all as specified and directed. |
| 50 | S&F in repair GI tube 15 mm dia medium grade galvanished with all fittings laid in floors /wall etc.including taking up or down 15mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 51 | S&F in repair GI tube 20 mm dia medium grade galvanished with all fittings laid in floors /wall etc.including taking up or down 15mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 52 | S&F lagging to 15mm bore pipes used in internal water supply or plumbing all round with, 25mm thick bonded mineral wool preformed 'SNAPON' pipe section of density 144 Kg \cum conforming to IS 9842 alongwith chiken mesh wire netting 25 guage , 20 mm mesh fixed in repairs, complete all as specified and directed. |
| 53 | All as per Ser item no 52 here-in-before but 20mm bore pipe. |
| 54 | S&F in repair 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plug with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 55 | M&L for rendering 10 mm thick on brick/stone masonry surfaces or fair faces in cement motar 1:4 finished even and smooth (without using extra cement) including taking down of cement plaster of any description including racking out of joints hacking for keys and scrubing down with water etc, Including water Proofing Compound 3% of WPC, complete all as specified and directed. |
| 56 | M&L for rendering 15 mm thick on brick/stone masonry surfaces or other than fair faces in cement motar 1:6 finished even and smooth (without using extra cement) including taking down of cement plaster of any desc including racking out of joints hacking for keys and scrubing down with water etc, complete all as specified and directed. |
| 57 | M&L for rendering 10mm thick on brick/stone masonry surfaces or fair faces in cement motar 1:3 finished even and smooth (without using extra cement) in celling including taking down of cement plaster of any description including racking out of joints hacking for keys and scrubing down with water etc, complete all as specified and directed. |
| 58 | M&L for providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth, complete all as specified and directed. |
| 59 | M&L for preparation of old plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed. |
| 60 | M&L for preparation of new plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed. |
| 61 | M&L for preparation of old plastered surfaces of wall and applying two coats of oil bound distemper complete all as specified and directed. |
| 62 | M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper complete all as specified and directed. |
| 63 | M&L for preparation of old or undecorated surface of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specifed and as directed. |
| 64 | M&L for preparation of new or undecorated surface of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specifed and directed. |
| 65 | S&F in repair Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed. |
| 66 | S&F in repair Towel Rail 450mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) complete all as specified and directed. |
| 67 | S&F in repair 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors / fixed to walls including dismantling of rain water pipe and sewage line pipe of any type and any size including fitting complete all as specified and directed. |
| 68 | S&F in repair 75mm dia PVC (SWR) pipes single socketed, in any length fixed to walls / floors or in trenches, including dismantling of rain water pipe and sewage line pipe of any type and any size including fitting complete all as specified and directed. |
| 69 | S&F in repair PVC (SWR) bends any radius, 110mm bore, fitted with oval access door complete all as specified and directed. |
| 70 | S&F in repair PVC (SWR) vent cowl 75mm dia complete all as specified and directed. |
| 71 | S&F in repair PVC (SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 72 | S&F in repair bend suitable for 110mm dia PVC (SWR) pipe complete all as specified and as directed. |
| 73 | S&F in repair 110mm bore PVC (SWR) junction, single (single T) equal or unequal with door access complete all as specified and directed. |
| 74 | S&F in repair for PVC (SWR) WC connector with lip ring 110mm complete all as specified and directed. |
| 75 | Treatement for sunken portion is as follows :-(a) Demolition of lean concrete and other type of filling in sunken portion & cleaning the sunken portion including vertical wall surface complete as directed.(b) Maintain the sunken to a slope of 1:40 outward with 32mm dia GI pipe spout projecting at least 150 mm beyond outer face of wall.(c) Top of the sunken floor slabs shall be laid to a slope 1:40. The surface of RCC slab shall be made even and smooth by using extra cement while the concrete is still green. Concave fillet in PCC 1:2:4, type B0 of radius 75 mm shall be provided at the junctions of RCC slab and adjoining walls. (d) M&L .Floor and side walls upto the finished floor level shall be plastered with 15 mm thick CM 1:4 mixed with water proofing compound @ 3% by weight of cement. Over plastered surfaces, applying evenly two coats of industrial bitumen 85/25 at the rate of 1.20 Kg/Sqm in each coat over vertical surfaces and floors of sunken floors of toilet including cleaning of surfaces a layer of APP based polymeric membrane not less than 3mm thick, weighing not less than 3 kg per sqm, reinforced with polyster non- woven fabric (weighing not less than 150 gm per square metre) shall be laid by torch application. Side overlaps shall be 100mm and the ends laps shall be 150 mm and overlap joints shall also be sealed by torch application.(e) The sunken portion shall be filled with lean cement concrete 1:5:10, type E2 using 40 mm brick aggregate after carrying out satisfactory testing of CI pipes / joints and slabs / walls by filling water for 72 hours. The sunken portion of Nahani / floor trap and pipe joints shall be embedded in PCC 1:3:6 blocks.(f) 32 mm dia GI spout shall be provided to drain out leakage, if any. |
| 76 | S&F rotational moulded triple layered polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position of 500 ltrs capacity fixed with PVC tank all accessories be combined all rates Coated ,complete all as specified in SSR Part I. |
| 77 | M&L for preparation of old steel surfaces over 10 cm in width or girth and applying one coat of synthetic enamel paint on old painted surfaces, complete all as specified and as directed by Engr- in - Charge. |
| 78 | S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment (thick 0.90 mm) etc complete all as specified and directed. |
| 79 | S&F plates (plain or chequered) channels (thick 0.90 mm), square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed. |
| 80 | M&L for preparation of new steel surfaces over 10 cm in width or girth and applying one coat of synthetic enamel paint on new surfaces,over a one coat of primer complete all as specified and directed by Engr- in - Charge. |
| 81 | S&F for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including dismantling plain or corrugated steel sheeting, any gauge ,thickness including Nainital or similar pattern roof covering, complete all as specified and directed. |
| 82 | S&F for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including dismantling plain or corrugated steel sheeting,any gauge ,thickness including Nainital or similar pattern roof covering . |
| 83 | S&F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays towall or roof for 100/75 mm pipe complete all as specified and directed. |
| 84 | S&F in repair Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or incluidng fixing contilever brackets and connecting union to pipe over all Size 915mmx460mm bowl SIze 410mmx330mmx160mm complete all as specified and directed. |
| 85 | S&F in repairs Harrison rails/curtain rod, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and as directed. |
| 86 | S&F framed wk such as grills, grating etc with ends of bars shouledered and or riveted, or forged into spikes, framed guard bars, barred iron doors ladders framed balusters, walk ways railings framework of water tanks and similar work conforming to Fe 290 Gde-E- 165 complete all as specified and directed. |
| 87 | Steel ventilator / Window with top hung shutter including hinges, steel peg stay, complete all as specified and directed. |
| 88 | Demolition and breaking up drain pipes of internal dia 150mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed. |
| 89 | M&L SGSW line 150mm dia SGSW pipe laid in trenches and jointed complete all as specified and directed. |
| 90 | M&L for concrete bed to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8, type D2 (using 40mm graded agg) for 150mm bore pipe all as specified. |
| 91 | M&L PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) in foundation, filling and mass concrete complete all as specified and directed . |
| 92 | M&L Brick work with sub-class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement motar 1:4 complete all as specified and directed. |
| 93 | M&L rendering 15 mm thick plastering in cement mortar 1:4 on brick / stone masonary other than fair faces of brick work finished even and smoth wothout using extra cement, complete all as specified and directed. |
| 94 | M&L for RCC M-25 Design Mix (using 20mm graded stone aggregates) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 95 | S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified and directed. |
| 96 | M&L formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 97 | Supply only integral water proofing complete all as specified and directed. |
| 98 | M&L for Providing precast ce- ment concrete 1:3:6 type C1 (using 20mm graded crushed stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and setting in mortar complete with joints with cement mortar 1:3 to match complete all as specified and as directed by Engineer-in-Charge. |
| 99 | S&F PVC (SWR) vent cowl 75mm dia complete all as specified and directed. |
| 100 | S&F 75mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, fixed to wall complete all as specified and directed. |
| 101 | M&L cutting into existing manholes for using 150 mm dia of pipe internal dia connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4, type B-1smooth finished, and reforming benching as required complete all as specified and directed. |
| 102 | S&F mild steel TMT bars 10mm dia and over, cut tolength, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge. |
| 103 | Demolition of reinforced concrete Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed. |
| 104 | Demolition of Brick/stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashler facing, dressed stonework and precast concrete articles complete all as specified and directed. |
| 105 | M&L for Brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in cement mortor 1:4 complete all as specified and as directed by Engineer-in-Charge. |
| 106 | Removing ecxavated/ Demolished material exc 50 m and n exc 250 m deposting where directed at all level n exc 1.50 m above the starting point complete all as specified and directed. |
| 107 | S&F of point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLSH insulated un-sheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC FRLSH insulated un-sheathed copper conductor single core multi stranded flexible cable (green color) as earth lead in and including cable 1100 Volts grade including casing and capping/conduit (ISI marked) including sunk cast iron/presed steel terminal boxes, junction boxes, other boxes made from thick sheet of suitable sizes for mounting of switches, sockets, fan regulators, light fittings etc.covered with plastic laminated sheet or PVC gang box 2 to 8 way as per site requirement fiing in surface mount or concealed including cutting chases to wall making good the disturbed surfaces to match with the existing specification including taking down old one, complete all as specified and directed. |
| 108 | All as per item No 107 here-in-before but wiring with 1.5 sqmm copper wire ( FR-LS-H) and 1.5 sqmm earth wire for socket outlet 3 pin 5 Amps on same board. |
| 109 | All as per item No 107 here-in- before but wiring with 1.5 sqmm copper wire ( FR-LS-H) and 1.5 sqmm earth wire for socket outlet 3 pin 5 Amps on independent board. |
| 110 | All as per item No 107 herein before but wiring with 2.5 sqmm copper wire ( FR-LS-H) and 2.5 sqmm earth wire for socket outlet 6 pin 15 Amps on independent board. |
| 111 | S&F switch piano flush button single pole, one way 5 Amps complete all as specified and directed. |
| 112 | S&F switch socket combination 2 in 1,5A, flush type complete all as specified and directed. |
| 113 | S&F switch socket combination 5 pin 16A, flush type complete all as specified and directed. |
| 114 | S&F distribution board single pole & neutral with 200 Amps rated bus bar, for double door IP-42 DB's ,made out of sheet steel enclosure, recessed type, factory made powder coated 8 way -240 Volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc including taking down old one complete all as specified and directed. |
| 115 | S&F of distribution board single pole & neutral with 200 Amps rated bus bar, for double door IP-42 DB's ,made out of sheet steel enclosure, recessed type, factory made powder coated 12 way -240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc including taking down old one complete all as specified and directed. |
| 116 | S&F of MCB's single pole 240 Volts 6 to 32Amps 10 KA 'C' curve series, including taking down old one complete all as specified and as directed by Engr -in-Charge. |
| 117 | S&F including taking down of MCB SPN, 240 volt, 63 Amp capacity, 10 KA, 'C' curve including taking down old one complete all as specified and as directed by Engr -in-Charge. |
| 118 | S&F of Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings including taking down old one complete all as specified and directed. |
| 119 | S&F LED Bulb 9 Watt complete all as specified and directed by Engr-in-Charge. |
| 120 | S&F including LED, 20 Watts, 4 ft, fittings complete with all accesories for mounting light fittings complete with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body including taking down old one complete all as specified and directed. |
| 121 | S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 Watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete including taking down old one complete all as specified and directed. |
| 122 | S&F ceiling rose with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body, complete all as specified and directed. |
| 123 | S&F 09W/10W Bulk head liminiares including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 124 | S&F Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLSH PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing caping of size 2x6 sq. mm + 1x4 sq. mm earth wire including taking down old one, complate all as specified and directed.Note: Two run of 6 Sqmm and one run of 4 Sqmm PVC conduit/ casing capping shall be measured as one run. |
| 125 | M&L for earthing complete with galvanised steel earth plate electrode 60x60cmx6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge lead of the plate not less than 1.5 mtr below normal ground level, connected galvanised earth lead wire 4.0mm dia by means of bolts, nuts,check nuts and washers of galvanised iron or steel all as shown in Electrical plate No 3 connected to earthing test point including earth work, including testing on completion, complete all as specified and directed by Engr-in-Charge. |
| 126 | S&F PVC insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 Volts grade, cross-sectional area 35 sq, mm 3.5 Core, including taking down complete all as specified and directed. |
| 127 | S&F factory made Busbar with MCCB of suitable size as per relevent IS, mounted on angle iron legs of size 40mmx40mmx6mm imbedded in PCC 1:2:4 block type B-2 (using 40 mm graded aggregates) fabricated out of 4 mm thick CRCA sheet suitable for 3 Phase, 415 Volts, 50HZ AC Supply, busbar chamber with aluminum busbar of suitable 200 Amp rating for 3 Phase and 4 wire system duly insulated with heat shrinkable sleeve as per colour, supported on epoxy insulator 01 set, common earth bus of 25mm x 4mm at bottom inside panel board with two earth terminal out side panel board, cable alley cable gland with independent plate at bottom and complete panel board painted with powder coating in grey colour and complete internal wiring, including taking down old unserviceable one complete all as specified & directed, Make of Panel Board : dvepl/Siemen/tricolite/Schnieder/Siemen(i) MCCB neutral link 415 volt 50 Hz, AC 100 Amps 35 KA - 01 No (incoming) (ii) MCB SPN 63 Amp Curve-06 No (Outgoing) (iii) Indicator lamp-01 Set Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysSep 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 30 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender