Tender For Construction Of Covered Car Parking In Jco/Or Md Accn At C Block And Provn Of Shed For Devotees At Bldg No P-44 Stn Masjid Under Ge Narangi
Tender Value
48.82 Lakhs
Estimated cost
Bid Submission
08 Sep 2026
11 days left
EMD
97640
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
guwahati → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of Covered Car Parking In Jco/Or Md Accn At C Block And Provn Of Shed For Devotees At Bldg No P-44 Stn Masjid Under Ge Narangi
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n. exc 30 cm deep and averaging 15 cm deep and getting out in soil and loose soil complete all as specified and directed. |
| 2 | Excavation in trenches not exc 1.50 m wide and not exc 1.50 m deep for foundation or for shafts, wells cesspits,man holes etc not exc 10 Sqm on plan and n exc 1.5m in depth and getting out in soft / loose soil complete all as specified and as directed. |
| 3 | Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surfaces in soft/loose soil complete all as specified and as directed. |
| 4 | Returning, filling in, including spreading levelling, watering and well ramming in layers n exc 25 cm in soft/loose soil complete all as specified and as directed. |
| 5 | Removing Excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and as directed. |
| 6 | Material and labour for sand filling under floors or in foundation including watering and consolidation complete all as specified and as directed. |
| 7 | Material and labour for hardcore of broken or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 8 | Material and labour for PCC 1:4:8 type D2 (using 40mm grade stone aggregate ) as in foundation /mass concrete complete all as specified and as directed. |
| 9 | Material and labour for PCC 1:2:4 type B1 (using 20mm graded stone aggregate ) as in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets , copings, kneelers, apex stones, bed plates, kerbs not provided for, water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc , complete all as specified and as directed. |
| 10 | Material and labour for Plain Cement concrete (1:2:4) Type B-2 ( using 20mm graded stone aggregate) in foundations, filling in floors and mass concrete etc complete all as specified and as directed. |
| 11 | Material and labour for Brick work with sub class 'B' old size built in CM 1 : 6, straight or curved on plan exc 6m mean radius on plan complete all as specified and directed. |
| 12 | Supply and fix Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. (FE-410 grade E 250 Quality B) complete all as specified and directed. |
| 13 | Supply and fix rolled M S Plate pain or chequred 5 mm thick or over in thickness of Fe-410-0 quality B W-E-250 complete all as specified and directed. |
| 14 | Supply and fix Framed brackets of angles or tees with web and flanges cut to shape, drilled & countersunk for screw, including bending & welding angles as necessary, gusket plates, riveting etc..n exc 10kg each brackets, conforming to Fe.290Gde-E-165(Brackets over 10kg each to be measured under 'structural steel') complete all as specified and directed. |
| 15 | Supply and fix MS screw bolts (Machine made) 16 to 20mm dia neck and length exceeding 15cm & not exceeding 22.5cm long hexagonal or square head at one end and screwed other end to be fixed with one washer and one hexagonal nut, the other end to be embedded in RCC fencing post while casting, completed all as specified and directed. |
| 16 | Supply and fix Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. (FE-410 grade E 250 Quality B) all as specified and as directed |
| 17 | Material and labour for Pre- painted hot dip aluminium Zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick (Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, four (4) coat atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws complete all as specified and as directed. |
| 18 | Material and labour Pre- painted hot dip aluminium Zinc alloy metalic coated plain steel sheet 0.50mm thick ( Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws as specified complete all as specified and directed. Note: To be executed for provision of ridges and hips. |
| 19 | Material and labour for 100 mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate ) in foundation, floor etc complete all as specified and as directed. |
| 20 | Material and labour for 100mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as.in floor finishing even and smooth with out using extra cement provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed |
| 21 | Material and labour for 75 mm thick, PCC 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide and 30 mm deep at every 2.4 mtrs interval filled with sealing compound grade 'A' etc complete all as specified and as direted. |
| 22 | Material and labour for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade fixed with grey cement and pigment complete all as specified and as directed. |
| 23 | Material and labour for 25 mm thick PCC (1:2:4) type B0 (using 12.5 mm graded crushed stone aggregate) as in floor finished rough to receive tiles complete all as specified and as directed. |
| 24 | Material and labour for coloured non skid cermic tiles 6 to 7mm thick (Square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.36 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 25 | Material and labour for coloured non skid cermic tiles 6 to 7mm thick (Square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.36 sqm, as in skriting dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed. |
| 26 | Material and labour for rendering 15mm thick external in CM 1:4 on fair faces of brick/concrete surfaces finished even and smooth without using exta cement complete all as specified and directed. |
| 27 | Material and labour for preparing newly plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified. |
| 28 | Material & labour for preparation of new surfaces of wall and applying over a coat of primer over 1 mm thick wall care putty and Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete, all as specified and as directed. |
| 29 | Material and labour for preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide, zinc chrome primer complete all as specified and as directed. |
| 30 | Material and labour for Forming Construction joint 40mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender