Tender For Widening Of Entry/Exit Gate Of Mt Section At Af Stn Nal Under Ge (Af) Nal
Tender Value
9.85 Lakhs
Estimated cost
Bid Submission
09 Sep 2026
17 days left
EMD
20000
Bank guarantee accepted
Document Fee
300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bikaner → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Widening Of Entry/Exit Gate Of Mt Section At Af Stn Nal Under Ge (Af) Nal
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed. |
| 2 | Demolition of brick work or stone/boulders masonary, built in cement mortar or cement lime mortar including all quions, arches, pillars etc. and rubbish materials remove from site complete all as specified and directed. |
| 3 | Demolition of Reinforced cement Concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and directed.Note :- The demolished material should be disposed off outside MoD land. The contractor shall quote his rates considering the above element, no extra paid on this. |
| 4 | Dismantling fencing wire mesh, any type complete all as specified and directed. |
| 5 | Dismantling posts or struts in natural ground (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed by Engineer -in-charge. |
| 6 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, drains ,etc. n exc 10 sqm on plan and getting out hard/dense soil complete as as specified and directed. |
| 7 | M&L for PCC 1:4:8 type C2 (using 40mm graded aggregate) in foundation filling and mass concrete complete all as specified and directed. |
| 8 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 9 | M&L for Mild steel TMT bars 5mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips for stirrups, spacer and binder complete all as specified and directed. |
| 10 | M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished surface of concrete complete all as specified and directed. |
| 11 | M&L for Formwork to sides of pillars, posts, struts, piers, columns, and stanchions Square, rectangular or polygonal for rough finished surface complete all as specified and directed. |
| 12 | M&L for RCC M-25, in foundations, including rafts, footings, foundation beams. Plinth beams, bases for columns, etc basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 13 | M&L for RCC M-25, in pillars, posts, struts, piers, columns etc complete all as specified and directed. |
| 14 | M&L for 18 to 20 mm thick granite (of any type) work (table rubbed and polished) in in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble duet with admixture of pigment to match with shade of granite laid over and including 15mm thick screed bed or bedding layer in cm 1:6, and incliding rounding of edges of granite slabs 10 to 20 mm thick by grainding and rubbing and finished smooth, coloured as approved by Garrison Engineer complete all as specified and directed.Note: (i) Front facia edges of granite slabs shall be rounding and finished smooth. The contractor shall quote his rates considering the above element, no extra paid on this.(ii) Granite in pillars shall be screwed also with stainless steel screws. |
| 15 | S & F Mild Steel work as in hold fast 400mm long embeded in PCC block with splitted ends and in braces in diagonal hand made sliding bolts, clamp hooks and similar work like Banks, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe410-0 or Fe 310-0 complete all as specified and directed. |
| 16 | S & F Framed work as in doors, gates of angle or other section FE-410 W (Gde E-250) Quality 'A' with gusset plates, MS Plain black sheet for door, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 17 | S & F 3D stainless steel (Grade-304) Hollow writing letters height n,exc 30cm ( Hindi/ English) including welding, riveting, screwing with SS screws and fixing complete all as specified and directed. |
| 18 | M & L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 19 | Excavation in post holes(or similar holes) each in not exc. 0.50 cum getting out returning, filling in an ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm watering and removing surplus soil out of defence land and making good surface complete all as specified & directed. |
| 20 | M&L for PCC(1:3:6) type C2 (40mm graded stone aggregate) filling in post holes, foundation, and other similar work complete all as specified & directed. |
| 21 | Fixing only Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified & directed.Note:- Fencing post dismantled under item No 5.00 to be refixed. |
| 22 | Fixing only in repair Galvanised 2 strand , steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or typing at crossings with and provision of galvasnised mild steel wire, staples or steel pins, etc as directed (each line wire to be measured) |
| 23 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified & directedNote :- Old chain link dismantled under item No 4.00 to be reused. |
| 24 | S&F mild steel screw bolts (machine made) with hexabonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n.exc 5cm long, diameter of neck in 16 to 20mm complete all as specified & directed |
| 25 | Demolition of cement concrete (unreinforced) in ground floor and paving n. exc.15 cm thickness and removing the rubbish outside MoD land complete all as specified & directed. |
| 26 | Material and labour for 75mm thick PCC 1:4:8 type D-2 ( using 40mm graded aggregate) thick as in sub base of floor surface finished even & rough to receive floor topping complete all as specified and directed. |
| 27 | M&L for sand cushion (Tibba Sand), filling under floors/tiles/paver blocks or in foundations including watering and consolidation complete all as specified and directed. |
| 28 | M&L for precast concrete interlocking paver block rubber moulded, vibratory finished of approved shape and size confirming to IS 15658-2006 of 80 mm thickness with grey cement and no pigment, M-40 Grade design complete all as specified and directed |
| 29 | Material and labour for PCC 1:2:4 type B-1 ( using 20mm graded aggregate) as in roof kerbs or mud stops, rounded or chamfered on edge complete all as specified and directed. |
| 30 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete and as directed by Engineer-in-Charge |
| 31 | Returning, filling in including spreading levelling watering complete all as specified & directed |
| 32 | Removing excavated material soil exc. 250 m but n exc. 500 m and depositing where complete all as specified & directed M&L for disconnecting from the existing location cutting off worn out aluminium cable end and Supply, laying and testing in replacement cable XLPE Insulated ,screened, PVC bedded,galvanized steel strip or wire armoured,electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core including taking out existing cable of any size. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysSep 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender