Tender For Special Repair To Bldg No Et-12 And Et-13 Bsc Living Accn Under Ge (Central) Pune
Tender Value
48.51 Lakhs
Estimated cost
Bid Submission
09 Sep 2026
17 days left
EMD
97100
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No Et-12 And Et-13 Bsc Living Accn Under Ge (Central) Pune
BOQ
| Sl. No. | Item Description |
| 1 | M&L for water proofing treatment to RCC roof slab,walls,chajjas etc,shall be carried out as specified below and as directed by Engr-in-charge(a) Removing of existing old bitumenous tarfelt (water proofing treatment) including cement screed bed and clean the surface with wire brush and washing with water to achieve the original surface of slab.(b) M&L for 10mm thick plaster screed bed layer in CM 1:3 on concrete surfaces mixed with liquid water proofing compound 200 ml per bag of cement (c) Preparing plastered surfaces of roof slab,walls, chajjas etc by brooming with broom sweeping free from dirt dust etc and applying one coat of oil based cold bituminius primer @ 0.40 ltr per Sqm of area complete all as specified .(d) Laying APP polymer modified approved membrane ,non woven,polyster,weighing not less than 3.5Kg /Sqm and 3mm thick with laps and over laps as specified and joints sealed and applied complete by torch application methd all as specified and directed by Engr -in-charge .Carring out test by flooding water for 24 hrs for leekage and seepage and rectifying the same to the entire satisfaction of GE.(e) Finally applying two coat of bituminous aluminium paint @ 0.15ltr/Sqm on the top of membrane & complete all as specified and directed by Engr-in-Charge. |
| 2 | Demolition of unreinforced cement concrete of any description and in any position on roof slab/sunken slab as in padding etc including removing rubbish off the premises complete all as directed. |
| 3 | M&L for cement concrete (1:2:4) type BO (12.5 mm graded aggregate) as in sunken floor,roof padding and similar items mixed with liquid water proofing compound @ 200ml/Bag of cement complete all as specified and directed. Note: Liquid WPC shall be measured and paid seperately. |
| 4 | Supply only liquid water proofing compound |
| 5 | Taking down Chowkhats or frames not exc. 1.5 sq. m each complete and making good disturbed portion of jambs with PCC 1:3:6 type C1 using 20mm graded aggregates, plastering, finish as required etc as directed |
| 6 | Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc 1.50 Sqm but not exc 4 Sqm each with and including making good the disturbed surfaces as original with CM (1:6) or PCC (1:2:4) type B0 complete all as specified and as directed. |
| 7 | S&F pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed.Note :- Rates quoted deemed to include S&F of 100mm mild steel medium wt butt hinges(min 03 nos in each frame) |
| 8 | S&F 30mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides, both face, is covered with decorative face veneer with lipping/frame to match complete as directed |
| 9 | Supply and fixing( factory Made ) 2nd class hard wood 35 mm thick glazed and skelton shutters open rebated and prepared to receive gauge. (Without sash bars ) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I section 8 clause 8.24 (a),both face, is covered with decorative face veneer with lipping/frame to match supplied and fitted to chowkats complete all as specified. |
| 10 | S&F anodised powder coated window and ventilator shutters in three track sliding (whichever the case may be ordered to sliding horizontally or vertically) with two or more shutters with sliding arrangement with two or more shutter rubber beading and glazing clips using aluminium sections weighing not less than 0.55 Kg/M inclusive aluminium handle / handle slot, locking arrangement etc complete all as specified and directed (Note :- Glass pane/wire mesh shall be measured and paid separtely) |
| 11 | Supply only 4.0mm sheet glass, ordinary quality n exc 0.5 sq. m in each pane |
| 12 | Supply only stainless steel wire mesh 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to aluminium window / ventilator shutters / steel windows etc complete all as specified and directed |
| 13 | M&L for framed work such as grills,gratings, etc with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework ofwater tanks and similar work conforming to Fe.290.Gde-E-165 Complete all as specified and directed. |
| 14 | S&F Factory made wood grain printed (Prelaminated) solid PVC single door frame of size 50 x 47 mm with a wall thickness of 5mm prelaminated colour sheet reinforced with 19 mm x 19mm MS square tube having wall thickness 19 guge complete all as shown in sketch on page 150 of SSR 2020 Part II complete all as specified and directed. |
| 15 | S&F factory made wood grain printed (Prelaminated) solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes 19 mm x 19 mm having wall thickness 19 gauge for stiles. MS tube 15mmx 15mm having wall thickness 19 mm gauge for top and bottom rails. MS frame shall be covered with 5mm thick heat moulded prelaminated colour PVC 'C' channel having 5mm thick PVC sheet strip 20mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2mm) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail. Paneling of 5mm thick prelaminated colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30 mm PVC sheet beading and jointed together with solventcement complete all as shown in drg give on page 176 of SSR 2020 part II. The width of stiles and rails shall be as specified in para 8B.2.1 on page 145 of SSR 2020 part II. Complete all as specified and directed. |
| 16 | S&F stainless steel butt hinges 100mm, medium weight complete all as specified and directed |
| 17 | S&F 150 mm extruded aluminium alloy handles ,fabricated type all as specified and directed |
| 18 | S & F Aluminium anodised barrel tower bolt of extruded section 150mm long all as specified and directed |
| 19 | S&F 250 mm long aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 20 | Demolition of cement concrete in ground floors and paving n exc 15cm (below or above ground) and inclusive of removal of debris out side defence land complete all as specified and directed |
| 21 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 22 | M&L for Cement concrete type D2 1:4:8 (using 40mm graded stone aggregates) in foundations, filling and mass concrete & sub base of flooring complete all as specified and directed |
| 23 | M&L for 75mm thick (1:3:6) Type-C2 (using 40mm graded crushed stone aggregate) as in plinth protection / path finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed. |
| 24 | M&L for non skid ceramic coloured tiles 600x600,7 to 8 mm thick in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 25 | All as per item No 24 above but in skirting / vertical surfaces over and including 10mm thick baking coat of CM 1:3 complete all as specified. |
| 26 | M&L for Glazed ceramic tiles including 10 mm rendering CM 1:4 in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and including dismantling floor heath or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises all as specified and directed |
| 27 | M&L for non skid ceramic coloured tiles, size 300x300 7 to 8 mm thick in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 15mm thick screed bed of CM 1:6 complete all as specified and directed . |
| 28 | M&L for rubber moulded glossy chequered cement concrete tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry with grey cement and no pigments in floors over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed |
| 29 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa of grade AZ 150 as in roof covering/cladding to wall, bent to shape as required and directed fixed with self tapping screws and including dismantling of roof sheet/pre painted galvalume aluminium zinc coating GI based corrugated steel sheets/manglore tile & AC sheets etc. |
| 30 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa of grade AZ 150 as in roof covering/cladding to wall, bent to shape as required and directed fixed with self tapping screws and including dismantling of pre painted galvalume aluminium zinc coating GI based corrugated steel sheets/manglore tile & AC sheets etc. |
| 31 | M&L for 6 mm thick one side laminated gypsum ceiling board for false ceiling on aluminium powder coated grid work 60 cm x 60 cm with using 36.5 mm x 23.5 mm x1.5 mm thick main tee, 23.5 x 23.5 mm x 1.50 cross tee and 25 x 25x 1.5 mm angles fixed to perimeter of wall for false ceiling including necessary supporting hanger with 2.0 mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling suspended @ 120 cm C/C both ways, size of grid shall be 605 x 605 mm, and applying three coats of white wash and including Dismantling of existing boarding, any description fixed in any position with nails i.e. in cupboard shutters, partitions, false ceiling and wall lining etc |
| 32 | M&L for GI tubing 15mm bore fixed to walls, ceilings or laid in floors medium grade concealed including taking up or down 15mm bore steel water tubing and connection complete all as specified and directed. |
| 33 | M&L for GI tubing 20mm bore fixed to walls, ceilings or laid in floors medium grade concealed including taking up or down 20mm bore steel water tubing and connection complete all as specified and directed. |
| 34 | S&F 1000 litres rotational mouded polyethylene three layer water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I incl 20mm bore ball brass valves, high pressure with polythene float and flynut complete screwed for iron pipe/PPR pipe or brass ferrule and fixed and including Dismantling of water tank and removing to store capacity 1000 litres complete all as specified and directed. |
| 35 | S & F in repair Gun-metal, globe or gate valves ISI marked, 15mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed. |
| 36 | S & F in repair Gun-metal, globe or gate valves ISI marked, 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed. |
| 37 | S&F in repair Brass CP wall mixer for mixing hot & cold water with provision for both hand shower and overhead shower complete with 115mm long bend pipe, connecting legs & wall flange and fixed. |
| 38 | S&F in repair 15mm bore chromium plated two way bib cock fancy type. complete all as specified and directed. |
| 39 | S&F in repair 15mm bore chromium plated pillar cock fancy type complete all as specified and directed.. |
| 40 | S&F in repair 15mm bore chromium plated angle cock fancy type.complete all as specified and directed. |
| 41 | S&F in repairs Vitreous China wash basin, white/coloured, flat back, size 550x400mm excluding taps, waste chain & plug & porcelain stopper but including brackets and 32mm dia 1mtr long PVC waste pipe. |
| 42 | S&F in repair Vitreous China wash down water closet pan P or S (pedestal pattern), white (excluding fixing bolts, flushing cistern & flush pipe) inclusing health faucet. |
| 43 | S&F in repairs PVC valveless, syphonic action type, flushing cistern 10 litr capacity, low level, white, with intel, ball valve, float & handle including brackets complete all as specified and directed. |
| 44 | S&F PVC connections 15mm size with PTMT nuts of length 450mm |
| 45 | S&F in repair grating doom 100mm dia of PTMT (Minimum weight 25gms) |
| 46 | S&F in repair brass chromium plated overhead shower 100mm round shape single flow with rubit cleaining system fitted to steel pipe or union complete. |
| 47 | S&F PVC(SWR) Nahani trap 75mm bore with SS grating with or without holes incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as directed. |
| 48 | S&F 110mm PVC (SWR) bands |
| 49 | S&F 75mm PVC (SWR)bands |
| 50 | S&F 110mm bore PVC (SWR) junction double,(double T).equal or unequal with access door complete. |
| 51 | S&F PVC (SWR) Coupler 75/110mm dia bore complete. |
| 52 | S&F PVC (SWR) cowl 75/100mmdia as required complete |
| 53 | S&F in repair Cast iron 75mm dia PVC trap, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) |
| 54 | Demolition and breaking of drain pipes AC /CI/PVC set in cement mortar or adhensive all as directed of 75mm to 110 mm dia |
| 55 | S&F 110mm bore PVC rain water pipe single socketed with rubber ring joints fixed to wall complete all as specified & directed |
| 56 | All as per item No 55 here-in-before but 75 mm bore. |
| 57 | S&F 110mm bore PVC bend any radius complete all as specified and directed. |
| 58 | All as per item No 57 here-in-before but 75 mm bore. |
| 59 | S & F in repairs brass chromium plated Tubular towel rail 20mm dia \\"D\\" type 60cm long. |
| 60 | M&L Pre-cast cement concrete block masonry with solid blocks, exc. 10cm in width and setting in mortar,complete PCC (1:5:8) gde D-5 and setting in CM 1:6. and including Demolition of Pre-cast cement concrete block /brick/stone masonary with solid block complete all as specified and directed. |
| 61 | Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 62 | M&L rendering 10 mm thick in CM 1:6 on fair face of brick /concrete / stone surfaces of any description and finishing the surfaces even and smooth with a thin layer of sogal finish complete with complete all as specified and directed. |
| 63 | M&L rendering 15 mm thick in CM 1:4 in on brick/concrete wall surfaces of any description, and finishing the surfaces even and fair complete all as specified and directed. |
| 64 | M&L for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of cement primer complete all as specified and directed. |
| 65 | M&L for preparing new plastered surface of walls and applying two coats of cement based paint over a coat of cement primer complete all as specified and directed. |
| 66 | Dismantling cast iron work of any description and in any position all as specified and directed. |
| 67 | M&L Rolled sections as in gate, main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates of Fe-410-W,quality 'A' complete all as specified and directed. |
| 68 | M&L for preparation of new or previously untreated steel or iron surfaces of any description over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete |
| 69 | M&L for preparing old plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a thin layer of wall care putty including complete removal of existing treatment of any layer on wall complete all as specified and directed. |
| 70 | M&L for preparation of old steel surfaces of any description and applying one coat of synthetic enamel paint of selected colour complete all as specified and directed. |
| 71 | Preparation of old plastered or unplastered surfaces of wall and applying one coats of cement base paint on wall all as directed and specified. |
| 72 | S & F in repair stainless steel curtain rails 25mm dia with SS brakcet, knobs, end or wall brackets etc. complete all as specified and directed. |
| 73 | Taking down of existing Ceilling fan / Wall mounted fan/ Exhaust fan of any size and sweep and keeping safe custody and refixing the same existing place with serviceable condition by minor repairs and painting, clamps, required down rod as per site requirement complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 74 | Taking down of existing Ceilling fan / Wall mounted fan/ Exhaust fan of any size and sweep and keeping safe custody and refixing the same existing place with serviceable condition by minor repairs and painting, clamps, required down rod as per site requirement complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysSep 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender