Tender For Upgradation Of Dic Office Budgam Including Gm Quarter Budgam.
Tender Value
27.43 Lakhs
Estimated cost
Bid Submission
10 Sep 2026
18 days left
EMD
54860
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Budgam → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Upgradation Of Dic Office Budgam Including Gm Quarter Budgam.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation in all Kinds of soil by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30cm in depth 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50mtr |
| 2 | P/L of stone soiling hand packed including carriage |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-all work upto plinth level in 1:2:4 mix using 20mm N/size using crushed aggregate including all carriages upto site of work complete |
| 5 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) above superstructure |
| 6 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 7 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 8 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown |
| 9 | Dry random rubble masonry with hard stone in foundation and plinth: With bond stone Quarry. |
| 10 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centring, shuttering, finishing and reinforcement 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). |
| 11 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 12 | Centring and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings |
| 13 | columns and slab |
| 14 | P/l of gyp board ceiling incl.stainless steel frame work complete job |
| 15 | Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0mm thick glass panes |
| 16 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture including priming coat. |
| 17 | Dismantling of existing tile, plaster and ceiling and disposal of unserviceable material |
| 18 | Providing and laying in position 75-80 mm thick interlock cement concrete tile laid on cement mortar of mix 1:3 |
| 19 | Providing and fixing of powder coated sliding al door and window with frame incl.5mm thick glass panes and 12mm thick prelaminated particle board with all hardware accessories |
| 20 | P/f of sanitary fitting a) Wall mixer(cera,hindware) |
| 21 | Geyser 50 ltr Venus, Crompton |
| 22 | Angle valve(cera,hindware) |
| 23 | C.P. connection |
| 24 | Soap case |
| 25 | Towel rod |
| 26 | Mirror |
| 27 | Wash basin with pedestrial (cera, hind ware) |
| 28 | bib cock (cera, hind ware) |
| 29 | Sink mixer (cera, hind ware) |
| 30 | Water closet Indian(cera, hind wareWith cistern all fitting and conc. |
| 31 | Low level PVC flushing cistern |
| 32 | One piece European type commode |
| 33 | PPR 35MM |
| 34 | PPR 25MM |
| 35 | PVC 4” |
| 36 | Pvc 3” |
| 37 | P-trap4” |
| 38 | Elbow 4” |
| 39 | Tee 4” |
| 40 | P-trap3” |
| 41 | Elbow 3” |
| 42 | Tee 3” |
| 43 | collar |
| 44 | grating |
| 45 | main hole of size 3’.0x2.0of brick masonry main hole with cover complete job |
| 46 | Waste coupling |
| 47 | Waste pipe |
| 48 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 49 | Providing and fixing of P.V.C panelling of approved make incl. frame work complete job |
| 50 | Wiring for the following light points with 1.5Sqmm PVC insulated copper conductor 1100 volts grade standard flexible FRLS wires of approved make in concealed or surface mounted PVC conduit including providing and fixing of 6 Amp single pole rocker operated flush mounted switch of approved quality, color make and design in 1.6mm thick GI box.A). One light controlled by 6 Amp Switch. |
| 51 | Switched socket outlet with 4 Sq.mm PVC insulated copper conductor 1100 volts grade stranded flexible wires in concealed or Surface mounted 25mm dia 2mm thick PVC conduit including providing and fixing of 16 Amps 3 pin switched socket of approved make and grid plates and earthing the third pin of socket outlet with 4 Sq.mm PVC insulated copper conductor stranded flexible FRLS wire |
| 52 | Wiring for 230v ac, 5pin 5/6 amps switched socket outlets for light duty power with 230v ac 5/6amps, 3no. SP switch and socket, on same modular grid plate mounting with 2x2.5sqmm stranded copper conductor insulated 1100v grade wire in 25mm dia, 1.6mm thick rigid MS conduit/Pvc with earthing of 3rd pin by 1/1.5 sq mm stranded copper conductor insulated green 1100v grade wire with lug complete. |
| 53 | Wiring for ceiling/wall Fan points same as above in item No 1. but controlled by electronic stepped regulator 200 watts and 5A control switch and 15mm dia circular or hexagonal in 1.6mm thick MS zinc passivity sheet steel body and 12mm dia MS bar hook complete with white ,3mm thick 200mm dia laminated circular cover |
| 54 | P/F of 10 watt LED surface light including all necessary fitting complete job (Havel’s or equivalent) |
| 55 | Wiring for circuits for light/fan/bells/exhaust fans/ AC’s etc. with following size PVC insulated 1100v Grade multi strand copper conductor wire, green insulated multi strand copper conductor for earth wire in the existing conduits complete including connections all the three wires for phase, neutral and earth shall have to be taken to switch board and then distributed further. (without PVC, Conduits)a) ) 2x2.5+1x2.5 Sq.mm stranded copper PVC insulated for lighting circuits |
| 56 | 2x1.5 sq mm for inverter circuits |
| 57 | Supplying and laying of sub main wiring from panel to distribution boards a)4x10 Sq. mm +2x6 Sq mm stranded copper conductor FRLS PVC insulated for heating circuits |
| 58 | 4x 6 Sq mm +1x2.5 Sq mm stranded copper conductor PVC insulated for lighting circuits |
| 59 | P/F of Celling fan (1200mm sweep 5 star) including all necessary fitting complete job (Havel’s or equivalent) |
| 60 | Supplying and installation testing and commissioning of 6 ways of TPN DB box |
| 61 | Supplying and installation testing and commissioning of following mccb,sa) 25 to 32 amp McbSp |
| 62 | b) 63 Amp DP |
| 63 | P/F of exhaust Fan (300mm) including all necessary fitting complete job. |
| 64 | Design fabrication assembling supply installation testing and commissioning of LT sub main panel suitable for 415 V 3 phase 50 HZ 4 wire power supply system panel shall be fabricated out of 2mm thick CPCA sheet steel in cubical formation compact mobilize in form 3d construction wall mounted and shall be dust and vermin proof 3mm thick cable gland plate shall be provided both at the top and bottom of the panelMCCB 160Amp 25 k TPN 63 Amp 02 No AL bus bar 200 amp Changeover 200 Amp CT coils 01 setDigital AmmeterDigital VoltmeterIndication Lights |
| 65 | SITC of chemical earthing using electrode of size 50mm dia 2 meter long connected with 32x4mm GI internal strip complete with excavation, civil works, RCC cover with back fill compound. The voltage between neutral and earth not to exceed 2 volts. |
| 66 | Supplying and laying of 50 Sq mm 3.5 core Al Armored cable of havells make complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender