Tender For Rehabilitation Of 5 Vent Sluice At The Confluence Of Bagjola Part-Ii Khal Consisting Of 5 Nos. Vertical Draw Shutter And 5 Nos. Flap Shutter With New Hoisting Arrangement Including Winch System At Baroj Khal, P.S. Harora, Dist.- North 24 P
Tender Value
17.46 Lakhs
Estimated cost
Bid Submission
03 Sep 2026
14 days left
EMD
34935
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
24 Paraganas North → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Rehabilitation Of 5 Vent Sluice At The Confluence Of Bagjola Part-Ii Khal Consisting Of 5 Nos. Vertical Draw Shutter And 5 Nos. Flap Shutter With New Hoisting Arrangement Including Winch System At Baroj Khal, P.S. Harora, Dist.- North 24 Parganas.
BOQ
| Sl. No. | Item Description |
| 1 | Taking out old existing unservicable damaged draw/flap gate shutter of distributories/ branch canal/minor canal/channel completely after disengaging from hoisting system completely for installation of new gate shutter. The work includes cutting of gates into suitable pieces by gas cutting, removing the same by mechanical means or suitable crane, stacking all the pieces at the suitable place or departmental godown or as directed by the Engineer in charge. The cost includes cost of man power employed for dismantling and cost of consumables like oxygen, accetylene gas, hire charges of machineries, like chain pulley block, gas set, tools & tackles, scaffolding and safety equipments etc including carriage loading & unloading with all lead & lift. |
| 2 | Fabrication , Supply, erection and Commissioning of new Slide type vertical lift regulator service gates of Canal/River as per IS: 5620 - 2000/Latest Revision consisting of skin plate, vertical and horizantal grider, stiffener etc. made of MS material consisting of angle , channel, beam, plate, flat, etc. conforming to IS : 2062 -2011/latest revision manufactured as per approved drawing and direction including cost of Materials, Machinaries , Manpower, Cutting, Aligning, drilling, Welding, Finishing, consumables,Carriages and all overheads with all leads and lifts complete as per specification (without painting). Width of Gate shuteer size above 2 metre |
| 3 | Cost for supplying and fitting fixing of Flat rubber seal (Make : Universal Moulders & Engineer/Popular Rubber Works (Pvt) Ltd/SAB Industries/Unique Polymer Works/equivelant approved make conforming to lS : 11855 -2011/Latest Revision) for different types of gate shutter as per direction of E.I.C. The cost includes cost of man power employed for fitting fixing, cost of rubber seal, hire charges of tools & tackles, scaffolding and safety equipments etc including carriage loading & unloading but excluding supply of ms clamp/ flat plate, bolts, nuts and washer.65mm x 10 mm. |
| 4 | Cost for supplying and fitting fixing of angle type rubber seal (Make : Universal Moulders & Engineer/Popular Rubber Works (Pvt) Ltd/SAB Industries/Unique Polymer Works/equivelant approved make conforming to lS : 11855 -2011/Latest Revision) for different types of gate as per direction of E.I.C. The cost includes cost of man power employed for dismantling & fitting fixing, cost of rubber seal, hire charges of tools & tackles, scaffolding and safety equipments etc including carriage loading & unloading but excluding supply of ms clamp/ flat plate, bolts, nuts and washer.Size: (88mm+60mm+08mm) x 14mm(thick) |
| 5 | Cost for supplying and fitting fixing of bulb/musical node/J‐ type rubber seal (Make : Universal Moulders & Engineer/Popular Rubber Works (Pvt) Ltd/SAB Industries/Unique Polymer Works/equivelant approved make conforming to lS : 11855 -2011/Latest Revision) for different types of gate as per direction of E.I.C. The cost includes cost of man power employed for fitting fixing, cost of rubber seal, hire charges of tools & tackles, scaffolding and safety equipments etc including carriage loading & unloading but excluding supply of ms clamp/ flat plate, bolts, nuts and washer.Solid bulb size- 40Ø 140 X 10 mm |
| 6 | Supplying of M.S flat for clamping Rubber seal with hole as per direction of EIC. |
| 7 | Supplying of M.S bolts with nut for clamping Rubber seal as per direction of EIC. |
| 8 | Supplying, fifling & fixing of top runner by supplying, fitting and fixing of new Mild Steel Channel conforming to IS : 2062 -2011/latest revision with necessary Mild Steel lugs of required length and size by making hole into top of the civil structure and fixing with necessry masonery work with maintaining proper line and level as directed by the Engineer- in-charge. The cost includes cost of materials, man power employed, cost ofm.s materials, cost of civil works along with two coats of epoxy paint over two coats of zinc rich primer. |
| 9 | Supplying, fifling & fixing of M.S fabricated pedestal stool of suitable size, consisting of bottom plate, top plate, four nos legs etc febricated with suitable sizes m.s plate, m.s angle conforming to I.S 2062 of latest revision and as per approved drawing & direction of Engineer in charge. The cost includes cost of materials, man power employed for dismantling and fitting fixing, civil works consumables like cutting tools, gas, oxygen, welding rod, anchor bolt of required size, hire charges of machineries, like gas cutting set, welding set, tools & tackles etc including carriage loading & unloading. 6Nos |
| 10 | Supplying, fitting & fixing of screw hoisting arrangement made of MS bottom plate, top plate, collar with necessary holes on base plate and top plate to accommodate thrust bearing of suitable size as per approved drawing & design and as per direction of Engineer in charge. The cost includes cost of ms plate as per IS: 2062 -2011/ latest revision, manpower employed for dismantling and fitting fixing, consumables like cutting tools, bolt & nuts of required size, hire charges of machineries, like lathe/shaping machine, grinding machine, drilling machine, tools & tackles etc. including carriage loading & unloading but excluding the cost of lifting Nut/Bush, thrust bearing & wheel supplied separately. |
| 11 | Supplying, fitting & fixing M.S fabricated wheel in the screw hoisting system for lifting or lowering the draw shutter. The wheel consisting of suitable size ms hub to accommodate any size of G.M/C.I nut. The rim and four nos. arm of wheel are made of 25mm. to 36mm. dia m.s rod complete as per direction of the Engineer-in-charge. The cost includes cost of materials, man power employed for dismantling and fitting fixing, consumables like cutting tools, welding rod, hire charges of machineries, like bending machine, lathe machine, grinding machine welding set, tools & tackles etc. including carriage loading & unloading.Upto 60cm dia. MS Wheel |
| 12 | Supplying, fitting & fixing of screw rod having square thread of 1.5/2 T.P.I, Material bright steel [EN‐8/EN9/forged Cl‐4 (45C8) as per IS :1875 1992/latest Revision]. dia and thread length as required and providing with a drilled hole of required dia on the other end after flattened and supplying with one no. bolt and nut of required size and all other components as required as per direction of Engineer‐In ‐ Charge. The cost includes cost of material, man power employed, consumables like cutting tools, emery paper, cloths, hire charges of machineries, tools & ackles, grease, mobil etc including carriage loading & unloading as per direction of Engineer in charge.Upto length 3 metre |
| 13 | Supplying, fitting & fixing Gun Metal Nut as per requirement having 1.5/2 T.P.I square thread for screw gearing arrangement, perfectly metting with the screw rod/gear rod for lifting the draw shutter as per direction of E.I.C. The cost includes cost of materials, man power employed, consumables like cutting tools, emery paper, cloths, , hire charges of machineries, tools & tackles etc including carriage loading & unloading. |
| 14 | Supply of bearings Bearing no.51111 (SKF)(Thrust bearing) |
| 15 | Fabrication, Supply, erection and commissioning of new Flap/Fall board shutter of Canal/River as per IS: 5620 2000/Latest Revision consisting of skin plate, vertical and horizantal grider, stiffener etc. made of MS material consisting of angle, channel, beam, plate, flat etc. conforming to IS : 2062 -2011/latest revision manufactured as per approved drawing and direction including cost of Materials, Machinaries, Manpower, Cutting, Aligning, drilling, Welding, Finishing, Consumables, Carriages and all overheads with all leads and lifts complete as per specification (without painting). |
| 16 | Supply, installation, testing and commisioning of following items for hoisting system and gear box as mentioned below as per direction including cost of Materials, Machinaries, Manpower, Cutting, Machining, Aligning, Anchoring, Welding, Finishing, Consumables, Carriage and all overheads with all leads and lifts complete as per specification (without painting) |
| 17 | Shaft /Pin with way made of EN8 |
| 18 | Base Fram(MS) |
| 19 | Sheve/Pulley(CS) |
| 20 | Supplying, fitting & fixing of winch machine of suitable capacity having compound gear train comprising of open spur ears/pinions of required nos, plummer/ pillow block , CI bush, shafts, rope drum, MS frame, MS cover along with locking arrangement as per approved drawing & direction of Engineer in charge. |
| 21 | M.S Frame |
| 22 | Cast Iron Rope Drum |
| 23 | EN‐8 Shaft |
| 24 | C.I Bush |
| 25 | Poul Ratchet Locking Arrangement |
| 26 | Gears/Pinions |
| 27 | Guide Roller/Load Roller (C.S) |
| 28 | Supply & fitting fixing of round strand (steel core/fibre core) steel wire rope (ungalvanised, IWRC) of 6x36 construction of 1960 tensile designation as per IS‐2266 (make: Usha Martin, Bharat Wire Ropes ltd or BIS approved makes), rope clamp with Dishakle and fitting fixing of said material with correct alignment and position inclusive of all cost of labour, T&P, scaffolding charges & all other incidental charges as necessary to complete the job in all respect upto the satisfaction of E.I.C. 16 mm dia (steel core). |
| 29 | Design, drawing, fabrication, supply, erection, testing and commissioning of rail track (pair of rails) using 45 kg /m standard rails on spillway bridge for movement of gantry crane for handling and operating spillway stop log gate elements / river sluice / canal sluice emergency gate including cost of all materials, machinery, labour, aligning, anchoring, welding & finishing complete as per specifications (without painting). |
| 30 | Painting of embedded parts, all types of gates, stoplogs and barscreen/ gratings etc on prepared surfaces with one coat of inorganic zinc silicate primer (airless spray preferred)70+/ - 5 micron and two super coats with a total thickness of 300 microns (each 150+/- 5) of solventless coaltar epoxy paint each coat 150 microns ( total 300 microns) including cost of all materials, labour, scaffolding etc., complete with all leads and all lifts. |
| 31 | Painting hoist structural components, tressle bridge, crane, lifting beam, cat work bridge and other similar structure on prepared surfaces with two coats of zinc phosphate primer (airless spray preferred) 40 microns/coat and one coat 65+/-5 micron of alkyd based micaceous iron oxide paint followed by two coats of synthetic enamel paint 25 microns/coat including cost of all materials, labour, scaffolding etc., complete with all leads and all lifts. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender