Tender for Tender for Increasing Capacity Of 33/11 Kv S/S Sukhpura, Thekha Lokdham And Reoti Dist- Ballia
Tender Value
28.65 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
2 days left
EMD
29000
Bank guarantee accepted
Document Fee
3540
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ballia → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Increasing Capacity Of 33/11 Kv S/S Sukhpura, Thekha Lokdham And Reoti Dist- Ballia
BOQ
| Sl. No. | Item Description |
| 1 | Increasing capacity (10+5 MVA TO 10+10 MVA) of 33/11 kv S/s Sukhpura, EDD II Distt. - Ballia. Decentralized Material (Provided by Contractor) |
| 2 | Structure (cable stand) for cable support & \\"L\\" Type structure for neutral. |
| 3 | M.S. Nut Bolt of various size with washer. |
| 4 | Control cable 2x2.5 mm². |
| 5 | Control cable 4x2.5 mm². |
| 6 | Alluminium Paint. |
| 7 | Red Oxide Paint. |
| 8 | Clamp and connector for 33kv switchyard equipment. |
| 9 | Junction box for control cable wiring. |
| 10 | Clamp for cable support. |
| 11 | P.G Clamp for Dog to Dog. |
| 12 | ERECTION OF WORK(Shifting & loading of following materials on private vehicle at store centre Ballia & carriage up to 33/11 KV Sub-Station Sukhpura, Distt- Ballia (distance 15 km approx) & Un-loading of the same with proper stacking at S/S site.) |
| 13 | 33 KV fuse set |
| 14 | 33 KV fuse set structure |
| 15 | 33 KV Transformer control panel for single transformer |
| 16 | 33 KV PT (33 KV /110 volts) |
| 17 | Rail pices 90 lbs. |
| 18 | ACSR Dog Conductor |
| 19 | Erection, Grouting of 33 kv fuse set structure & mounting 33 kv fuse set and connection. |
| 20 | Erection , connection, earthing and commisionig of 33 kv T/F control panel. |
| 21 | Erection, mounting and connection of 33 kv PT. |
| 22 | Water level delta earthing for transformer body (02 no.). |
| 23 | Primering and painting of all structure. |
| 24 | To place the rail piece on the T/F plinth |
| 25 | Shifting of old & used 33/11kv, 05 MVA power T/F from plinth by disconnection of radiator, conservator & other accessories after removal of T/F oil. |
| 26 | Errection of new 33/11 kv, 10 MVA power T/F including shifting of T/F from outside to inside the switch yard & mounting on T/F plinth in safe position thereafter fixing & commissioning of all accessories like radiator, conservator etc. top up of T/F oil. |
| 27 | Bore type pipe earthing (3x20 Feet) for T/F neutral earthing (Delta type) 01 no and body earthing 02 Nos. |
| 28 | Dismantling of old & used 33/11kv, 05MVA power T/F by disconnection of radiator, conservator & other accessories after removal of T/F oil. |
| 29 | Shifting of old & used 33/11kv, 05MVA power T/F by disconnection of radiator, conservator & other accessories after removal of T/F oil. |
| 30 | Laying of copper control cable of size 4x2.5 mm², 2x2.5 mm² from switchyard to control room 33 KV panel, 33 KV VCB,CT , 33 KV Control pannel & Power T/F by digging trench in switchyard including cost of sand and 1st class bricks with covering and making connection complete and including cost of laying. |
| 31 | Grouting of M.S. channel 3.2 mtr long (1 Nos.) for cable stand and welding of M.S. flat (3 Nos.) at equal distance for fastening cable by clamp with nuts and bolts mounting of cable at cable stand and connection of jumpers. |
| 32 | Fixing/replacement of required quantity of connecter mounted on 10 MVA Transformer, 33 KV CT connecter, 33 KV VCB connecter, 33 KV isolater connecter,33 kv isolater connecter Jaw, PG clamp for Dog, repairing of 33 KV copper rod of isolater with complete greasing, 33 KV proper jumpering on each 10 MVA T/f complete work in all respect.(Materials provided as per resspo norms as per requird). |
| 33 | Providing & Fixing/replace of 6 No 33 KV copper strip For HT/LT side & 1 No copper flexible bond for LT side For new 10 MVA T/f complete wok in all respect for 11 KV 3X300 mm² cable. Materials provided as per resspo norms. |
| 34 | Jumpering of HT/LT side of 10 MVA T/F by double circuit cable lead after providing 12 nos. required size of alluminium lug and nut bolt washer complete wok in all respect materials provided as per resspo norms. |
| 35 | Painting of newly erected structure in switchyard (Applying one coat of good quality red oxide & two coat of aluminium paint). |
| 36 | Increasing capacity (5+5 MVA TO 10+5 MVA) of 33/11 K.V. S/s Thekaha Lokdham, EDD- 4 Distt. - Ballia . Decentralized Material (Provided by Contractor) |
| 37 | Structure (cable stand) for cable support & \\"L\\" type structure for neutral. |
| 38 | M.S. Nut Bolt of various size with washer. |
| 39 | Control cable 2x2.5 mm². |
| 40 | Control cable 4x2.5 mm². |
| 41 | Alluminium paint. |
| 42 | Red oxide paint. |
| 43 | Clamp and connector for 33kv switchyard equipment. |
| 44 | Junction box for control cable wiring. |
| 45 | P.G clamp for Dog to Dog. |
| 46 | ERECTION OF WORK(Shifting & loading of following materials on private vehicle at store centre Ballia & carriage up to 33/11 KV Sub-Station Thekaha Lokdham, Distt- Ballia (distance 45 km approx) & un-loading of the same with proper stacking at S/S site.) |
| 47 | 3×300 mm², 11 KV XLPE cable. |
| 48 | 11 KV cable jointing kit 3×300 mm² outdoor. |
| 49 | 11 KV cable jointing kit 3×300 mm² indoor. |
| 50 | 33KV line Isolator. |
| 51 | 33KV LA. |
| 52 | ACSR Dog conductor. |
| 53 | Jointing charge of 11 kv C/J Kit. |
| 54 | Bore type pipe earthing (3x20 Feet) for T/F neutral earthing (Delta type) 01 no and body earthing 02 Nos. |
| 55 | Carriage unloading & laying of 11 KV “XLPE” power cable 3 x 300 mm² digging of pits of xize 0.5 x 0.5 mtr. covering of cable with sand and 1st class brick around the cable as per RESSPO Norms. |
| 56 | Dismantling of old & used 33/11kv, 05MVA power T/F by disconnection of radiator, conservator & other accessories after removal of T/F oil. |
| 57 | Shifting of old & used 33/11kv, 05MVA power T/F by disconnection of radiator, conservator & other accessories after removal of T/F oil. |
| 58 | Loading, carriage & erection of L.A.including earthing. |
| 59 | Laying of copper control cable of size 4x2.5 mm², 2x2.5 mm² from switchyard to control room 33 KV panel, 33 KV VCB,CT , 33 KV Control pannel & Power T/F by digging trench in switchyard including cost of sand and 1st class bricks with covering and making connection complete and including cost of laying. |
| 60 | Grouting of M.S. channel 3.2 mtr long (1 Nos.) for cable stand and welding of M.S. flat (3 Nos.) at equal distance for fastening cable by clamp with nuts and bolts mounting of cable at cable stand and connection of jumpers. |
| 61 | Mounting and fitting of line isolator on erected structures. |
| 62 | Errection, fixing/replacement of required quantity of connecter mounted on 10 MVA Transformer, 33 KV CT connecter, 33 KV VCB connecter, 33 KV isolater connecter,33 kv isolater connecter Jaw, PG clamp for Dog, repairing of 33 KV copper rod of isolater with complete greasing, 33 KV proper jumpering on each 10 MVA T/f complete work in all respect.(Materials provided as per resspo norms as per requird). |
| 63 | Providing & fixing/replace of 6 No 33 KV copper strip For HT/LT side & 1 No copper flexible bond for LT side For new 10 MVA T/f complete wok in all respect for 11 KV 3X300 mm² cable. Materials provided as per resspo norms. |
| 64 | Jumpering of HT/LT side of 10 MVA T/F by double circuit cable lead after providing 12 nos. required size of alluminium lug and nut bolt washer complete wok in all respect materials provided as per resspo norms. |
| 65 | Painting of newly erected structure in switchyard (applying one coat of good quality red oxide & two coat of aluminium paint). |
| 66 | Increasing capacity (10+5 MVA TO 10+5+5 MVA) of 33/11 K.V. Sub – Station Reoti EDD- 4, Distt. - Ballia.Decentralized Material (Provided by Contractor) |
| 67 | Main bus bar with complete structure with 06 No disc insulator B&S, 03 pin insulator, 12 No PG clamp. |
| 68 | 11 KV cable jointing kit 3×300 mm² outdoor. |
| 69 | 11 KV cable jointing kit 3×300 mm² indoor. |
| 70 | 11 KV cable jointing kit 3×185 mm² outdoor. |
| 71 | 11 KV cable jointing kit 3×185 mm² Indoor. |
| 72 | Top channel 100x50x6 mm, 2400 mm long. |
| 73 | Holding clamp. |
| 74 | Complete stay set. |
| 75 | Disc fitting for T&C 45 KN. |
| 76 | Disc insulator T&C 45 KN. |
| 77 | Polymeric 11KV pin insulator. |
| 78 | PG clamp. |
| 79 | Number plate with clamp and nut & bolt. |
| 80 | Danger plate with clamp and nut & bolt. |
| 81 | MS dropper angle. |
| 82 | M S Earthing Rod 20 x 2500 mm. |
| 83 | Barbered wire. |
| 84 | 11 KV E-bracket. |
| 85 | Armoured copper control cable 2×2.5 mm². |
| 86 | Armoured copper control cable 4×2.5 mm². |
| 87 | 24 volts battery and battery charger with cabinet. |
| 88 | GI pipe 6\\" dia over the 3x300/185 mm² XLPE cable. |
| 89 | Holding clamp for 11 KV cable. |
| 90 | Holding clamp For GI pipe / cable(3x185 mm²) & dropper channel . |
| 91 | M.S. nut & bolt various size with washer. |
| 92 | Structure for cable support |
| 93 | \\"L\\" type structure for neutral. |
| 94 | P.G clamp for dog to dog. |
| 95 | Rubber mat. |
| 96 | ERECTION OF WORK(Shifting & loading of following materials on private vehicle at store centre Ballia & carriage up to 33/11 KV Sub-Station Reoti, Distt- Ballia (distance 30 km approx) & Un-loading of the same with proper stacking at S/S site.) |
| 97 | PCC pole 8.5 mtr. long. |
| 98 | 33KV Single T/F control panel . |
| 99 | 33 KV VCB 800A, 750 MVA with steel structure. |
| 100 | 33 KV C.T 200-100/1A. |
| 101 | Structure of 33 KV CT. |
| 102 | 33 KV LA. |
| 103 | Structure of 33 KV LA. |
| 104 | 33 KV fuse set. |
| 105 | Structure of 33KV fuse set. |
| 106 | 33 KV bus isolator. |
| 107 | Structure of 33 KV bus isolator. |
| 108 | 33 KV post Insulator. |
| 109 | Structure of 33 KV post insulator. |
| 110 | 90 Ibs, rail pieces (44.64 Kg/mtr.). |
| 111 | ACSR dog conductor |
| 112 | ACSR panther conductor |
| 113 | 11 KV XLPE cable 3×300 mm². |
| 114 | 11 KV XLPE cable 3×185 mm². |
| 115 | 11 KV VCB 600-300/5A , 350 MVA I/C. |
| 116 | 11 KV VCB (out going) 200-100/5A, 350 MVA. |
| 117 | 11 KV bus coupler. |
| 118 | Fresh T/F oil. |
| 119 | Earthing of S/S outdoor equipments (earthmat). |
| 120 | Construction of power transformer plinth for 5 MVA transformer of size 3.5 x 3.5 x 1.5 mtr. including cost of all material as per drawing. |
| 121 | Body earthing (bore type) of 5 MVA power transformer body earthing at including cost of G.I. strip,G.I. pipe 1.5\\" dia 40' long and other earthing required all material. |
| 122 | Earthing of equipments like control panel (1No.), 11KV VCB I/C (1No.), LA (1No.) including cost of G.I. strip,G.I. pipe 1.5\\" dia 40' long and other earthing materials required.(delta type earthing). |
| 123 | Filling of transformer oil installed 5 MVA power transformer. |
| 124 | Providing & jointing charges of 11 KV “XLPE” C/J kit 3 x 300/185 mm² indoor/outdoor type. |
| 125 | Neutral earthing of 5 MVA transformer complete including cost of G.I. strip, G.I. pipe 1.\\" dia 30' long and other earthing materials (delta type earthing). |
| 126 | G.I. stand for neutral earthing of 5 MVA transformer with help of G.I. strip 50 x 8 mm and copper flexible bond etc. with G.I.angle, channel support and grouting. |
| 127 | Providing , erection and grouting of required channel/angle for cable stand and welding of M.S. flat at equal distance for fastening cable by clamp with nuts and bolts mounting of cable at cable stand and connection of T/F bushings. |
| 128 | Installation of 33 KV control panel for “VCB” with complete earthing with installation of battery and battery charger in control room and making connection. |
| 129 | Laying of 11 KV “XLPE” power cable 3 x 300 mm² / 185 mm² including digging of pits of xize 0.5 x 0.5 mtr. covering of cable with sand and 1st class brick around the cable. |
| 130 | Laying of 11KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3 m long complete work. |
| 131 | GI Pipe earthing complete for cable jointing kit with materials. |
| 132 | Erection of double pole on 8.5 Mtr PCC pole long and mounting of all accessories etc complete. |
| 133 | Grouting of stay rods (16 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing. |
| 134 | Shifting of 11 KV switchgear to control room and placing in control room with grouting of bolts and mounting of switchgear panels properly. |
| 135 | Electrical connection of 11 KV switchgear panel and fitting of bus bar and P.T. |
| 136 | Testing of 11 KV switchgear panel in all respect. |
| 137 | Providing of 03 phase generator on rent basis for testing of power transformer and related other equipment.etc.. |
| 138 | Laying of various typt of control cables. |
| 139 | Making of control cable trench in switchyard including cost of sand and 1st class bricks size 0.3m wide X 0.5m depth.with hanger and RCC covering plate. |
| 140 | Erection, grouting and mounting of “VCB” structure, fitting of “VCB” on erected structure with complete earthing. |
| 141 | Erection, grouting and mounting of CT structure. fitting of “CT” on erected structure with complete earthing. |
| 142 | Erection grouting and earthing of 33 KV bus isolator structure. |
| 143 | Erection grouting and earthing of 33 KV fuse set structure. |
| 144 | Erection grouting and earthing of 33 KV post insulator structure. |
| 145 | Erection grouting and earthing of 33 KV L.A. structure. |
| 146 | Mounting and fitting of 33 KV bus isolator 400 Amp. |
| 147 | Mounting and fitting of 33 KV post insulator. |
| 148 | Mounting and fitting of 33 KV LA. |
| 149 | Mounting and fitting of 33 KV fuse set ( copper strip as required size for 33 KV fuse set). |
| 150 | Bus bar extention work with all required materials. |
| 151 | Earhing of outdoor type switchyard earthing for newly erected structure as per proper specification with GI earthing strip. |
| 152 | Sepret earthing of sub-Station indoor equipment complete including cost of all materials. |
| 153 | Jumpring form 33 KV Bus bar to post insulator, bus isolator, VCB, CT and LA to 5 MVA transformer etc.( providing alluminium lug and PG clamp). |
| 154 | Construction of approach road inside the switchyard 1.5 Mtr. wide with 1st class bricks on edge soling and tipping complete work including cost of all materials. |
| 155 | Dismantling of existing pale fencing and after exentention, resetting after completion of transformer work and land filing work. |
| 156 | Painting of newly erected structure in switchyard (Applying one coat of good quality red oxide & two coat of aluminium paint). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender