Tender For Renovation Of Occupied House No. 1434A, 1190, 1229, 1565A, 1562, 1478, 1391 (Type-12) (Old) (7 Nos Houses ) Sector-20, Chandigarh (Ibm No. W4/2026/26076)
Tender Value
7.16 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
2 days left
EMD
14328
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Occupied House No. 1434A, 1190, 1229, 1565A, 1562, 1478, 1391 (Type-12) (Old) (7 Nos Houses ) Sector-20, Chandigarh (Ibm No. W4/2026/26076)
BOQ
| Sl. No. | Item Description |
| 1 | Excavating trenches of required width for pipes, cables,etc. including excavation for sockets and dressing of sides ramming of bottoms, depth upto 1.5 m including getting out the excavated soil and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating deposited layer by remming, watering, etc. and disposal of surplus excavated soil as directed, within a lead of 50 m DSR 2.10 |
| 2 | Pipes cables etc. exceeding 80mm dia but not exceeding 300mm dia DSR 2.10.1.2 |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : DSR 4.1 |
| 4 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources):DSR 4.1.3 |
| 5 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level upto floor V level in all shapes and sizes in : DSR 6.4 |
| 6 | Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 6.4.1 |
| 7 | 12 mm cement plaster of mix : DSR 13.4 |
| 8 | 1:4 (1 cement: 4 coarse sand) DSR 13.4.1 |
| 9 | Providing and fixing white vitreous china pedestal type water closet (European type ) with seat and lid. 10 ltr. Low level white vitreous china flushing cistern & C.P flush bend with fitting C.I. brackets, 40 mm flush bend, overflow arrangment with specials of standard make and mosquito proof coupling of approved municipal design, complete including painting of fittings and brackets, cutting and making good the wall & floor wherever required DSR 17.3 |
| 10 | W.C. pan with ISI marked white soild plastic seat and lid cera hirdware DSR 17.3.1 |
| 11 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillars taps, 32 mm C.P. brass waste of standard pattern, including painting of fitting and brackets, cutting and making good the walls wherever require: DSR 17.7 |
| 12 | White vitreous china wash basin size 550 x 400 mm with aa pair of 15 mm C.P. brass pillars tap cera hirdware. DSR 17.7.3 |
| 13 | Providing and fixing stainless steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets,cutting and making good the walls wherever required DSR 17.10 |
| 14 | Kitchen sink without drain board DSR 17.10.2 |
| 15 | 610x460mm bowl depth 200 mm DSR 17.10.2.2 |
| 16 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. DSR 17.28 |
| 17 | 32 mm dia DSR 17.28.2.1 |
| 18 | 40 mm dia DSR 17.28.2.2 |
| 19 | Providing and fixing soil, waste and vent pipe DSR 17.35 |
| 20 | 100 mm dia DSR 17.35.1 |
| 21 | Centrifugal iron S&S pipe as per iS : 3989 DSR 17.35.1.2 |
| 22 | 75 mm dia DSR 17.35.2 |
| 23 | Centrifugal iron S&S pipe as per iS : 3989 DSR 17.35.2.2 |
| 24 | Providing and fixing collar: DSR 17.57 |
| 25 | 100 mm DSR 17.57.1 |
| 26 | Sand cast iron S&S as per IS - 3989 DSR 17.57.1.2 |
| 27 | 75 mm DSR 17.57.2 |
| 28 | Sand cast iron S&S as per IS - 3989 DSR 17.57.2.2 |
| 29 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, Including cost of cutting and making good the walls and floors: DSR 17.60 |
| 30 | 100 mm inlet and 75 mm outletSand cast iron S&S as per IS : 3989 DSR 17.60.2 |
| 31 | Providing and laying of concealed G.I. pipe including cost of G.I.specials cutting chase 75mmx50mm & making good the wall and carriage from store to site of work complete in all respect DSR 18.10 |
| 32 | 15 mm dia nominal bore DSR 18.10.1 |
| 33 | 20 mm dia nominal bore DSR 18.10.2 |
| 34 | 32 mm dia nominal bore DSR 18.10.3 |
| 35 | Providing and fixing of Gun-Metal Peat Valve, ISI Marked complete in all respect DSR 18.17A |
| 36 | size 20mm i/d DSR 18.17.1A |
| 37 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : DSR 18.18 |
| 38 | 15 mm dia. nominal bore DSR 18.18.1 |
| 39 | Providing and fixing uplasticised PVC connection pipe with brass unions : DSR 18.21 |
| 40 | 15 mm nominal bore DSR 18.21.2.1 |
| 41 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) DSR 18.46 |
| 42 | 15 mm nominal bore DSR 18.46.1 |
| 43 | 20 mm nominal bore DSR 18.46.2 |
| 44 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank DSR 18.48 |
| 45 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931 DSR 18.49 |
| 46 | 15 mm nominal bore DSR 18.49.1 |
| 47 | Providing and fixing C.P. brass long body bib cock of approved DSR 18.51 |
| 48 | 15 mm nominal bore DSR 18.51.1 |
| 49 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. DSR 18.52 |
| 50 | 15 mm nominal bore. DSR 18.52.1 |
| 51 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 8931 DSR 18.53 |
| 52 | 15 mm nominal bore DSR 18.53.1 |
| 53 | Providing and fixing of Extension nippple upto 1-1/2\\" length DSR 18.53A |
| 54 | Cutting holes up to 30x30 cm in walls including making good the same: DSR 18.76 |
| 55 | With F.P.S. bricks DSR 18.76.1 |
| 56 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 ( 1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof.DSR 18.77 |
| 57 | Providing and fixing square-mouth S.W. gully trap grade 'A' complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x 300 mm size ( inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design. DSR 19.4 |
| 58 | 100 x 100 mm size P-type |
| 59 | With F.P.S. Bricks class designation 75 DSR 19.4.1.1 |
| 60 | Construction of Curb consisting of cement concrete 1:2:4 including cost of C.P. hinged grating and cost of sand bajri etc. of approved make |
| 61 | Providing& Fixing of drip seal joints to sand cast iron/ centrifugally cast (spun) iron pipes and fittings of diameter: |
| 62 | 100 mm |
| 63 | 75 mm |
| 64 | Providing and fixing of C.P. Steel Grating Heavy (With hole without hole) size 4\\" i/d of approved make |
| 65 | Providing and fixing of CP Brass/SS/ABS overhead shower with swiveling Joint , 125mm dia (min) with C.P Brass/ S.S Shower Arm and flange to the satsifaction of EIC of approved make ESSCO Model No. 536A & 542A or equialent Model of CERA /Kerovit/ Jal |
| 66 | Supplying and fixing of RCC/SFRC Cover with frame for Gully Trap Complete of Approved make |
| 67 | Supplying and fixing in position pre-cast RCC/SFRC Cover with frame of quality MD-10 and size 450mm |
| 68 | Prov. & fixing 550x 400 mm beveled edge mirror of superiorglass (of approved quality) complete with 5 mm thick hard board ground fixed to wooden cleats with C.P. brass of approved make |
| 69 | Providing and fixing of Gun-Metal Peat Valve, complete in all respect of approved make |
| 70 | size 15mm i/d |
| 71 | Providing and fixing of C.P. cup heavy duty of approved make |
| 72 | Providing and laying of UPVC pipe, IS-4985 marked, Pressure 6 kg/cm2 including cutting, joining, solvent and all necessary fittings complete in all respect except excavation.Size 110mm i/d |
| 73 | Providing and fixing of CP Brass/SS Towel Rail 600mm of with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36520 Warna or equialent Model of CERA /Kerovit/ ESSCO |
| 74 | Providing and fixing of CP Brass/SS/ABS Soap Tray made of Plastic including glass bowl of approved make Jal Model No. 36540 or equialent Model of CERA /Kerovit/ ESSCO |
| 75 | Providing and fixing of CP Brass/SS Towel Ring with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36524 Warna or equialent Model of CERA /Kerovit/ ESSCO |
| 76 | Providing and fixing of GI Elbow 75mm x 32 mm complee in all respect |
| 77 | Conversion of OWC/Indian W.C to E.WC P/S trap complete including dismentling of Indian/OWC 4\\" & C.I P trap fixing og 4\\" C.I bend PVC collar drip seal joint & 4\\" PVC pipe 1'-6\\" average length 6kg cm2 pressure repair of dismental floors fixing of surface W.C complete including cost of WC all specials pipe lead hamp yarn cement sand bajri etc Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender