Tender For Repairing Of Wash Room And Kitchen At Security Barrack, Neepco Corporate Office Complex, Shillong.
Tender Value
4.13 Lakhs
Estimated cost
Bid Submission
09 Sep 2026
16 days left
EMD
8300
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
East Khasi Hills → Meghalaya
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing Of Wash Room And Kitchen At Security Barrack, Neepco Corporate Office Complex, Shillong.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: a) G.S Sheet. |
| 2 | Demolishing brick work including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge. |
| 3 | Demolishing cement concrete including disposal of material within 50 metres lead as per direction of Engineer-in-Charge. a) Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 4 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead: a) Of area 3 sqm and below |
| 5 | Dismantling tile work in floors and roofs laid in cement mortar including stacking materials within 50 metres lead. a) For thickness of tiles 10 mm to 25 mm |
| 6 | Half brick masonry with common burnt clay (non-modular) 1st class brick in superstructure above plinth level up to first floor level.a) Cement mortar 1:3 (1 cement : 3 coarse sand) |
| 7 | Plain cement concrete works in foundation bed for footing steps, walls, brick works etc. below plinth level as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately).c) 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 8 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, complete.b) 40 mm thick |
| 9 | 12 mm cement plaster finished with a floating coat of neat cement of mix.a) 1:3 (1 cement : 3 fine sand) |
| 10 | Providing and fixing work in frames of doors, windows, clerestory window and other frames, wrought framed and fixed in position with hold fast, lugs or with dash fasteners of required diameter & length.c With 1st Class Local wood(i) Pooma/Hollock/Gamari and the like |
| 11 | Providing barge board of size 200×20 mm including fitting and fixing with necessary wood screws, etc. complete.d) White Pine Wood |
| 12 | Providing and fixing flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS:3087 marked, in ceiling etc. complete (framework to be paid separately).a) 12 mm thick |
| 13 | Applying priming coat:a) With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)/with ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood. |
| 14 | Providing and fixing pre-coated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS:277, in 240 Mpa steel grade, 5–7 microns. Sheet should have protective guard film of 25 micron minimum to avoid scratches during transportation and should be supplied in single length up to 12 meter or as directed by Engineer-in-charge. The sheet shall be fixed using self-drilling/self-tapping screws of size (5.5×55 mm) with EPDM seal, complete up to any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 15 | Providing and fixing pre-coated galvanised steel sheet roofing accessories 0.50 mm (+0.50%) total coated thickness, zinc coating 120 grams per sqm as per IS:277, in 240 MPa steel grade, 5–7 microns polyester top coat 15–18 microns using self-drilling/self-tapping screws complete.a) Ridges plain (500–600 mm) |
| 16 | Providing vitrified Antiskid Tiles of approved quality, size, shape and thickness not less than 8 mm in skirting over a cement mortar bed 15 mm thick of 1:3 (1 cement : 3 coarse sand) complete at all levels as specified and directed.a) Normal range |
| 17 | Providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to IS:15622 of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS:15477, in average 6 mm thickness, including grouting of joints (payment for grouting of joints to be made separately).a) Normal range |
| 18 | Float glass panes. a 4 mm thick glass pane (weight not less than 10 kg/sqm) |
| 19 | Providing and fixing Fibre Glass Reinforced Plastic (FRP) door frames of cross-section 90×45 mm having single rebate of 32×15 mm to receive shutter of 30 mm thickness. The frame shall be moulded with fire resistant grade unsaturated polyester resin and chopped strand mat. Laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fibre glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. Providing and fixing to existing door frames. |
| 20 | Providing and fixing to existing door frames. A) 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fir-retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and sites, with wooden frame and suitable blocks of seasoned wood inside at equired places for fixing of fittings, cast monolithically with 5 mm thick FRP laminated for panels conforming to IS:14856, including fixing to frames. |
| 21 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.0 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.Internal work: Exposed on wall(i) 15 mm nominal outer diameter pipes |
| 22 | (iii) 25 mm nominal outer diameter pipes |
| 23 | Finishing with Deluxe Multi Surface Paint System for interiors and exteriors using Primer as per manufacturer's specifications, including scaffolding:a) Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special Primer applied @ 0.75 ltr/10 sqm |
| 24 | b) Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coats applied @ 0.90 ltr/10 sqm over an under coat of Primer applied @ 0.75 ltr/10 sqm of approved brand and manufacture. |
| 25 | c) Painting steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of approved metal primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture. |
| 26 | Providing and fixing wash basin with C.I. brackets, 15 mm dia. CP brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required. |
| 27 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.a) Semi rigid pipe(i) 32 mm |
| 28 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan ) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: a) W.C. pan with ISI marked white solid plastic seat and lid |
| 29 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.White vitreous china Orissa pattern W.C. pan of size 580×440 mm with integral type foot rests. |
| 30 | Supplying, fitting & fixing of water Heater (Geyser) of 1.5 kW/3 kW with pressure release valve including all necessary accessories as required.(c) 25 litres capacity |
| 31 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer-in-Charge. |
| 32 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931.a) 15 mm nominal bore |
| 33 | Providing and fixing brass bib cock of approved quality.a) 15 mm nominal bore |
| 34 | Providing and fixing unplasticised PVC connection pipe with brass unions:a) 30 cm length(ii) 15 mm nominal bore |
| 35 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete.b) 200 × 10 mm |
| 36 | Providing and fixing bright finished brass handles with screws etc. complete:a) 125 mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysSep 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender