Tender For Provision Of Various B & R Work Services At Acy Armoury, Provision Of Aproach Path Between Runway Controller Hut 10R To Dvor And Provision Of Chain Link Fencing Of Fcm (Near M Block) At Afa Hyderabad.
Tender Value
26.80 Lakhs
Estimated cost
Bid Submission
10 Sep 2026
18 days left
EMD
53600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Medchal Malkajgiri → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Various B & R Work Services At Acy Armoury, Provision Of Aproach Path Between Runway Controller Hut 10R To Dvor And Provision Of Chain Link Fencing Of Fcm (Near M Block) At Afa Hyderabad.
BOQ
| Sl. No. | Item Description |
| 1 | M & L for precast cement concrete solid building blocks or slabs 10cm thick with plain or interlocking joints with PCC type C1 1:3:6 using 20mm graded stone aggregate setting in mortar 1:4 in walls, complete all as specified and directed. |
| 2 | M&L for rendering 15 mm in Cement Mortar 1:4 on fair faces of brick work or concrete surface walls finished fair and even complete all as specified and as directed. |
| 3 | M&L for preparation of new surfaces plastered or unplastered walls and applying two coats of cement base paint over a priming coat all as specified and directed. |
| 4 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard / dense soil. |
| 5 | Removing excavated soil exc. 1.50 km but n exc. 5 km and depositing where directed and complete all as specified and as directed by Engineer in Charge |
| 6 | M&L for hardcore of gauge n exc. 63 mm of broken stone boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface. |
| 7 | M&L for PCC 1:4:8 type D2 (using 40mm graded stone agg) 75mm thick as in floor sub base etc as specified directed. |
| 8 | M&L for 100mm thick Cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in sub base flooring complete all as specified and as directed by Engineer in Charge |
| 9 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 10 | M&L for Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in Hard/Dense Soil complete all as specified and directed. |
| 11 | M & L for providing cement concrete PCC 1:2:4 type B-1 mix using 20 mm graded stone aggregate as in kerbs, stoppers, edge stones etc including use of necessary formwork, straight or curved, finishing exposed surfaces etc complete all as specified and directed.. |
| 12 | Material and labour for Glazed ceramic coloured tiles in vertical surfaces 600X300X 7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match with and including roughining the existing surface and 10mm thick backing coat on vertical surfaces of wall in cement mortar 1:4 complete all as specified and as directed. |
| 13 | M&L for machine-cut Kota stone slab flooring 20- 25 mm thick over and including 20 mm thick cement screed base in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including roughing the existing floor surface, rubbing and polishing complete |
| 14 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground, posts embeded in concrete, brick work, masonry, etc complete all as spd and directed. |
| 15 | Dismantling fencing wire mesh,any type all as specifed and directed. |
| 16 | M&L for PCC work as in (1:3:6) type C-2 using 40mm graded stone aggregate in foundation filling & mass concrete for Post/Pillars etc all as specified and directed. |
| 17 | S & F Mild Steel works as in post, strut in fencing and including flat iron fillets for securing fencing including all necessary drilling, bolting or riveting etc., and similar work conforming to Fe 410-0 or Fe 310-0 all as specified and directed by Engr-in-Charge. |
| 18 | M & L mild steel round bars as in bands, straps, supports or stays for chain link fencing conforming to Fe 410-0 all as specified and directed by Engr-in-Charge. |
| 19 | Supply only MS galvanised chain link fencing, complete all as specified and directed. |
| 20 | Fixing only chain link fencing including line wires, any mesh size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire. complete all as specified and directed. |
| 21 | S&F MS Screw bolts hot dip galvanized machine made with hexagonal or square heads at one end and screwed the other or screwed both ends ,each screwed end to be fitted with washer and one hexagonal or square nut 5 to 10mm dia meter of neck exc 5cm but n exc 10cm longall as specified and directed. |
| 22 | S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe-410-W(GdeE-250) quality |
| 23 | M&L for preparing new or previously untreated surfaces steel Surfaces of any des-cription, over 10cm in width or grith, not otherwise described, and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 24 | M&L for preparing new or previously untreated surfaces steel Surfaces of any des-cription, n exc 10cm in width or grith, not otherwise described, and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 25 | Excavation in trenches n exc 1.5m wide and n.exc 1.50 m depth for foundation etc or n. exc 10 sqm on plan & n.exc 1.5m depth for shaft, cesspits, manholes, pier holes etc and getting out in hard rock complete all as specified. |
| 26 | M&L for PCC 1:4:8 Type D2 using 40 mm graded stone aggregates as in foundation, filling and mass concrete complete all as specified. |
| 27 | M&L for pre-cast cement concrete block masonry of Type C1 1:3:6 (using 20mm graded stone aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:4 etc complete all as specified and directed by Engr-in-Charge. |
| 28 | M&L for 15mm thick in CM 1:4 rendering on brick or concrete surfaces finished even and fair (without using extra cement) complete all as specified and directed by Engr-in-Charge. |
| 29 | M & L for three coat of white wash on new surface of wall including preparation complete all as specified. Please Enable Macros to View BoQ information 333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333333 33333.0 3333.0 3333333.0 3.33333333333333e+98 33333333333333.0 3.33333333333333e+52 |
AI Tender Summary
Tender Timeline
Aug 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender